Connecting an IPad to WRN160N

I am trying to connect a new IPad to my network and the Ipad will not take the network password.  Do I need to change any settings on the router?  I am using MAC filtering for security

Which security you are using on the router....?
Try to disable the Mac Filtering on the router and check.Also,if you are using WEP security then,use Key1 as the security key to connect the wireless network on the IPad.

Similar Messages

  • How to connect my ipad to TV is vga adapter is not working

    Hi i am trying to connect my ipad via vga to my beovision 9. All is correctly installed but its not working. My Beovision service centre advises to purchase an hdmi adapter but this apparently not available. Any suggestions What to do next ??

    HI and welcome....
    This thread may offer some ideas for you.
    http://discussions.apple.com/thread.jspa?messageID=11579515&#11579515
    Carolyn

  • Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.,

    Is there a way of connecting the ipad to the smart board in the classroom, so that the smartboard is the control, and the ipad is displaying what is on the smartboard? This is to help a visually impaired child see what is on the smartboard.

    Absolutely!
    Install Splashtop2 on the PC and enable it to be controlled or ran from iPad or Reflection to simply allow iPad to serve as PC unwired monitor. With Splashtop and an Apple TV connected, you use the smartboard as usual, yet the PC and iPad can see the same content. The impaired child can even interact with the Smart Board via the iPad as if he were writing directly on the big screen. Erasing functions can be done by touching the Smart Board manual controls. Several variables are in play that cause this lack of functionality:
        Apple won't permit PC software that infringes its proprietary apps.
        Smart Board companies refuse to develop iPad apps because they feel threatened and are being replaced by iPads
        School districts think Apple TV is meant for copyright infringement and could expose them to safe harbor lawsuits
        Network administrators make it impossible to login Apple TVs because they don't want the streaming occurring
        Classrooms are not able to keep up with the technology of using the iPad
        Clicker companies refuse to play with iPad because they see it as a potential threat to their core business clients
        Apple is not working as hard as it could to exploit its capabilities in education, thus losing money in iPad sales
    The bottom line is that we educators and technology developers are hurting our childern with petty conflicts.

  • I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    I cannot update my ipad2 to ios5.  Updating through iTunes on pc Windows Vista, Error message reads "cannot connect to iPad Software Update Server.  Tried resetting network settings, still not connecting.  Tried updating iTunes, still not connecting.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom

  • Hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem pleas

    hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
    and this is an pic for the problem

    There is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it

  • How to connect my ipad with mac using bluetooth?

    how to connect my ipad with mac using bluetooth?

    You can't so quit trying. Take a look at this to see what is supported with regard to Bluetooth connections in iOS.
    iOS: Supported Bluetooth profiles

  • How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    How to connect my iPad 2 to Sony Bavaria wirless? Any other way than apple tv?

    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
    this one? if i connect it to the tv, will it work  if audio system is connected to the tv?

  • How to connect my ipad using static ip

    How to connect my ipad using static ip?
    Using Netgear Router.

    Go to Setting > General > Network > WiFi > Then tap the blue icon next to your network, from here you can setup a static IP on your internal network.

  • How to connect my IPad to a security enabled wifi

    how to connect my IPad to a security enabled wifi

    iPad not connecting to a Secure Wi-Fi signal
    Turn OFF your wifi hub so the network is not broadcasting (or go out of range) so the
    iPad can no longer see the SSID
    Choose another network
    Type in the SSID (WiFi Network name)
    Select the security type
    Enter the password
    At this point, you will not be able to join the network (it is not turned on or you walked out of range, remember?)
    Turn ON your network hub and wait for the DSL or Internet to get connected, (30 secs to 1 minute in my case) or walk back in range
    Then click the Join button on the iPad
    Voila, as they say in Texas

  • How to connect my iPad, Brother printer, and AirPort Extreme?

    How to connect my iPad, Brother printer, and AirPort Extreme?

    I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

  • My ipad 3 is frozen on the plug into itunes page. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (there is no usb port on an ipad). If anyone could help it would be appreciated.

    My ipad 3 is frozen on the plug into itunes page - it won't turn off or on - just stuck. I have tried to follow advice I have found on these pages but I don't know how to connect the ipad to my mac (the advice is to connect ipad to mac and there is no usb port on an ipad). If anyone could help it would be appreciated. Going nuts.

    I think you should probably also read the iPad User Guide. You didn't say what version of iOS your iPad is running, so here's the links to both the iOS 6 and iOS 7 (PDF) versions:
    iPad User Guide for iOS 6
    iPad User Guide for iOS 7

  • HT4108 I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

    I'm trying to connect my iPad to my tv so that I can mirror whatever is on my iPad. I want to stream movies online and watch on the tv. I have the digital av adapter and an hdmi cable but it's not working. Any tips ?

    If this is an iPad 1, it won't mirror, but it will still output video from the 30 Pin dock connector.
    If your new TV has a conventional VGA in and stereo inputs you can try this connector.
    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=3a
    I used to stream video from both Netflix and YouTube and from my Mac using iTunes sharing through my iPad then with this connector plug into my iPad and TV.
    It won't be high resolution, but it will get you picture from iPad to TV.
    Good Luck.

  • IPad 2 - I am not able to connect my iPad 2 to my tv anymore using AV adapter.

    What is wrong with my iPad 2? I'm not able to conect my iPad to my proyector or tv anymore using AV adaptor. Is there something wrong with my iPad?
    I tried it with my wife's iPad 2 and it was the same result. I was not able to connect her iPad to my TV. Niether TV or a proyector couldn't find the device.
    Would you please help me? Your help will be well appreciated.

    Sounds like the one common thing is the adapter. The cheaper, non apple branded ones tend to fail.
    Try another adaptor before worrying about your ipad.

  • I am not able to connect my iPad 1 with TV using apple VGA adapter

    Hello,
    When I connect my iPad 1 with a wide screen TV using the apple VGA connector, there's no display on the TV.
    But when I do the same thing from iPad 2, the iPad screen is projected on TV.
    Please help

    Sounds like the one common thing is the adapter. The cheaper, non apple branded ones tend to fail.
    Try another adaptor before worrying about your ipad.

  • How to connect my iPad and iPhone to my new apple tv ?

    how to connect my iPad and iPhone to my new apple tv ?

    Also, make sure that all devices are on the same Wi-Fi network (e.g. not on a "guest" connection), and verify the ATV settings to see that AirPlay (and HomeSharing while you're at it) are turned on.

Maybe you are looking for

  • Error message information not displaying.

    Hi Experts,       when we click on error message (red icon) information will be displayed related to the error. but one of my user is getting blank page but when i tried with his id message is coming normally can u please suggest where the problem is

  • Problems with Apple Digital AV Adaptor

    I have purchased an adaptor to plug my ipad into the tv with a HDMi cable and there's sound on the tv but no picture. Any ideas?

  • Query problem in EJb3.0 after migrating into Jdeveloper11g(Alpha)

    Hi All, After migrating my application from jdeveloper preview-1 to j-developer(Alpha version), we have a query "select o from 'EntityBean' o where trim(lower(o.BeanAttribute))" where we are getting the IllegalArgumentException which is working fine

  • Form Setttings Save Path

    Hi Guys, Quick question I hope, does anyone know what the save path is for each users form settings when they adjust their on screen layouts. I am at a clients that has a very strange IT policy and everytime they log back into SAP the form settings h

  • Opening photos from Lightroom into Camera Raw?

    Hello! I have a little problem since I upgraded to CS4. I used to open my (RAW) photos from Lightroom (2) into Camera Raw - it did it automatically when I clicked "edit in photoshop". Now it doesn't work anymore, and I have no idea why - it opens the