Connecting an SPA 3102 after the computer

I am moving to a house in a fairly remote part of Australia without a telephone connection. To get the phone connected will be very expensive and take considerable time. I have mobile phone and wireless internet connection available but only with the most expensive provider. I am not a big user of the phone but every now and then, I have to make one of those calls that go through adozen menus and then leave you on hold for an hour, theb type of call that can send you bankrupt using a mobile service.
My proposed solution is to have a prepaid wireless internet account, using a USB dongle connected to my computer as the internet connection. Then to connect either a SPA3102 or a PAP 2T between the computer and a handset and use a VOIP service such as Voipcheap to make calls. With this setup, I would have unlimited landline calls within Australia for around $50 per year, much less that something like Skype.
Can I do this and if so, how? I have both devices and they are both presently configured to work connected to my Linksys gateway. Do I connect the computer to the LAN or eithernet of the SPA 3102 and will it just require a normal LAN cable? How do I assign the various addresses required? Do I need any extra software for my computer?
John Adams

Hi John -- Thanks for participating in the Small Business Support Community. Please consider posting in the section dedicated to Australia/New Zealand here:
https://supportforums.cisco.com/community/netpro/small-business/international/australia_newzealand?view=discussions.
Thanks,
Stephanie Reaves
Cisco Small Business

Similar Messages

Office 2013 - Word cannot establish a connection with this document after the system resumed from suspend mode

Hiya!
This issue has been answered numerous times for Office 2010 and Office 2007, but I have yet to any solutions or Hotfixes that work for Office 2013 (x64) on Win7.
How to replicate the issue:
Open a file from a network share.
Edit file.
Leave computer on with file open. Computer goes to sleep or into stand-by mode.
Wait a bit
Wake up computer
CPU opens file in Read-Only mode and gives you the following error "Word cannot establish a network connection with this document after the system resumed from suspend mode. Save the document into a different file to keep any changes."
What I've tried:
http://support.microsoft.com/kb/2434898 - Office 2007 registry fixes. Does not apply.
http://support.microsoft.com/kb/2413659 - Office 2010 problem. This exact issue. Says 'No microsoft products that match this hotfix are installed'
Work Around:
I can saving new versions of these files overrides this issue, but this is sometimes not possible for end-users who only have specific access to ONE SPECIFIC FILE in a particular network share.
Please let me know how I can alleviate this issue!
Thanks
-Chris

Hi,
Are those problematic documents created via previous versions of Office?
Please also try to run a repair of your Office 2013 installtion and check if it helps. See:
http://office.microsoft.com/en-in/excel-help/repair-office-programs-HA010357402.aspx
Regards,
Steve Fan
TechNet Community Support

Can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. help

can't get my epson sx535wd to work. my epson will get contact with my router (sitcom wl306) and my mac is on wifi, but they can't connect. epson can't find the computer and my report says: there are conflicting channels on my router or entry point. please help

OK, let's try these................
1 - Boot up from your install DVD and run "Repair Disk" from the Utility menu. When done, restart back to your desktop, repair permissions and restart your computer. Re-connect your printer.
2 - Download & install the Gimp drivers. Make sure the one you install is compatible w/your OS-Gutenprint 5.2.8-pre1. Repair permissions, restart your computer & re-connect your printer when done.
The Epson model I have, in order to get it to print wirelessly, I had to install a Gimp driver.
3 - Check out the following KB Articles:
Mac OS X 10.4 Help: Connecting to a network printer
Epson Printer Drivers v2.10 OS X
Adding a printer to your printer list in Mac OS X
Mac OS X 10.4 Help: The printer I'm adding says "Driver not installed"
======================
If still unsuccessful after trying all of the above, the problem could be your iBook or human error. You can either call Epson & ask to speak with a Mac savy supervisor or return the printer & find another that is compatible w/your current OS.

After the computer is awoken from Sleep...

After the computer is awoken from Sleep, Safari and Chrome cnnot find servers to access internet. Only happened since installig 10.9.2 - i have to reboot everyday!
What can I do to resolve not having to do this?

Is your Network Services Order set correctly...?
If you are connected to the Internet with an Ethernet cable, then Ethernet should be set first.
If you are connected to the Internet using Wi-Fi, then Wi-Fi should be set first.
Example: My Mac is connected to the Internet using an Ethernet connection.
If not, then click on the cog and correctly set your Service Order.

When i connect my ipod touch to the computer and it brings up itunes, and it starts syncing, it just stays on the last step(6) and I can't download anything else to my ipod.

I connected my ipod touch to the computer. When it brings up itunes and start to sync, it stalls at the last step (6). This keeps me from being able to add other songs from my library to my ipod. I'm very new at this and maybe just don't understand how it works.

Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP

My ipod is disabled and it says to connect it to itunes but, the computer with itunes got reset and lost everything and when i DL itunes again it wont coneect because it say i need to put the passcode in so it can connect but it wont let me putthe passcod

my ipod got disabled and it says to connect it to itunes but the computer i use got reset so it lost all the memory of itunes and i re downloaded it and it says it cant connect my ipod to itunes because i need to put the pass code in on the ipod but it wont let me because its disable some one help me out.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I have a 2007 MacBookPro. Ever since I installed Mountain Lion, I intermittently lose the keyboard backlight after the computer sits idol all night. A reboot resolves the problem.

I lose the keyboard lighting after the computer sits idol all night. This began with the Mountain Lion installation. A reboot resolves it.

I reset the SMC and it looks fine. I'm not sure if it resolved it, as this problem didn't reoccur every morning. I'll have to wait a few days to know for sure. Thanks for your advice.

When I connect my iPhone 4s to the computer, it says "USB device not recognized" , how do I fix this?

When I connect my iPhone 4s to the computer, it says "USB device not recognized" , how do I fix this?

Look to the right in the MORE LIKE THIS box.

Every time I connect my IPhone 5s to the computer it comes up as a new phone, even know I have synced it to the computer before

Every time I connect my IPhone 5s to the computer it comes up as a new phone ,even know I have synced it to the computer before and it worked fine

I would try 2 things. First, I would de-authorise the computer, then authorise it again. If that doesn't work, then second, you could try uninstalling iTunes and then reinstalling.

Is there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?

s there any problem for my iphone's battery to keep my charger connecting for few hours after the battery is full?
Sometimes i sleep and the my iphone is charging and of course the battery became full after two or three hours, and definitely i will not wake up in the midnight to just disconnect the charger, please i need your help.

This is considered normal use. I think everybody does this, including myself. It's not something to worry about in the least bit.
Just remember to complete a full charge cycle (allow the phone's battery to discharge to 10%-20%, then charge uninterruped to 100%) once a month and you'll be fine.
http://www.apple.com/batteries/iphone.html

My previous computer(2009) had ps cs2 installed. after the computer broke i bought a new computer (2014) , i cannot download ps cs2 downloaded to the new computer

my previous computer(2009) had ps cs2 installed. after the computer broke i bought a new computer (2014) , i cannot
download ps cs2 to the new computer. can somebody help me?
Thanks!
Henry

Have you tried https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads

IPhone 5s won't automatic connect to cellular network after the wifi connection lost.

My iPhone 5s won't automatic connect to cellular network after the wifi connection lost. I have try make a restore and open again my cellular data but the problem is still there, after I try to restart my iphone then can use my cellular data, but after few hour ago I still confront the same problem too.

I also tried a total reset. But it didn't work.

Zen V Plus keeps connecting and then disconnecting to the computer. HEL

So when I plug in my Zen V Plus into the computer using the USB cable, it pops up in windows XP as usual, but then 2 seconds later it disconects. I move it to the side and it re-connects, then 2 seconds later it disconects again. Can anyone tell me what's going on with my Zen??Thank you !!

I cannot guarantee that this is the answer to your question (I'm not an electrical engineer), but the same thing happened when I tried once to charge my Zen V Plus at work. But after reading this forum for a while, I came to the conclusion that the Zen waits for a specific signal from the USB port that says it's okay to charge it. If it doesn't get the signal, it goes to "sleep" for a while, then wakes up to check again. If still no "okay" signal is received, it cycles back and forth between sleeping and checking. That's why the screen lights up, then goes off for a while, then lights up again.
This is a GOOD thing I guess because it means I don't have to do the "disconnect USB dri've" thing since the Zen knows when it's receiving power.
At home I don't experience this behavior.
HTH, Roger

HT1766 my ipad is disabled how do I start it all over by connecting it to itunes on the computer im having problems

my ipad is disabled how do I start it alll over by connecting it to itunes on the computer

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Connecting my iPhone 4S to the computer makes my home network crash

Everytime I connect my new iPhone 4S 64gb to my computer, it starts a sync with iTunes and then the phone makes a sound like it disconnects (like when you unplug the phone from the pc) and then I watch the network bar at the taskbar and it shows like the network is disconnected, and the phone too, and also my entire house gets disconnected from internet. Just like the router was being unpluged or something.
This has not been a coincidence, I have done it lots of times and it keeps disconnecting me like 15 seconds after I plug the Phone into the computer.
PS: I just have noticed that it seems to give me an error when I sync a couple apps from my old iphone to this one (all content from the old one has been completely deleted) and when the phone syncs the apps that are missing it gives an error and then boom, internet crashes.
Error for every app is: 0xE8000065

Hey guz2221,
I found an article that will help isolate and resolve the issues of 0xE8000065. If it is a Mac that you are syncing with, there is an article link inside the following that will go into detail for that system.
iOS: Unknown error containing '0xE' when connecting to a Windows PC
http://support.apple.com/kb/ts3221
Thanks for using Apple Support Communities
Regards,
-Norm G.

Connecting an SPA 3102 after the computer

Similar Messages

Maybe you are looking for