Connecting and syncing PC's to Apple and Logic

I have PC's with sample libraries on which I want to connect through my Apple G5 to access in Logic. I will be using Kontakt as my sampler player on the PC's. How do I get my Apple to link with the PC's, and how do I get the machines to sync all together. I have seen that other users set up the PC's to link with their Mac's and that they are able to connect to their PC's through Multi-instruments that are set up in Logic. Just not too sure how it is all done and achieved.

In Marty's scenario...
Keyboard---->Logic--->Unitor--->Hammerfall--->PC/Sampler Instruments
      A                  B               C                  D                         E
In this scenario, playing a single note on the keyboard...
A to B = 1 ms. (approx. length of MIDI note-on message)
B to C = 1 ms.?? (MIDI going "thru" Logic is can be generally considered instantaneous, though let's say the worst case scenario would be 1 ms)
C to D = 1 ms. (same as above, approx. length of MIDI note on-message)
D to E = 1.5 - 3ms or more ?? (depends on the latency setting required for the PC)
Using the numbers from above, minimum latency from note-on to sound generation from the PC would be approx 3.5 to 7.5+ milliseconds.
PPC Quad G5, 6G RAM, LP7.1.1   Mac OS X (10.4.5)   Now wipe that smirk off your bill, duckboy!

Similar Messages

  • I just tried to connect and sync my iTouch (4G) to iTunes and I got an error message that said :This iPod can'be used because  Apple Mobile Device service is not started". I tried searching my PC for the program and no luck. Any suggestions?

    I just tried to connect and sync my iTouch 4G to iTunes and got this error message: " This iPod can't be used because Apple Mobile Device service is not started". I just did the upgrade fo Safari and iCloud.   Any suggestions?
    Thanks!
    Dan Farrell

    I corrected the link in the previous post you responded to, but here is the correct link again.
    http://support.apple.com/kb/ts1567
    B-rockt

  • Problem with connecting and syncing   (quicktime.qts)

    Hi,
    I have a problem with connecting and syncing my Iphone to itunes.
    iphone alone on PC -> uploading files (fotos) is possible
    itunes starts normaly, if iphone is not conected.
    if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
    AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
    ModVer: 7.65.17.80 Offset: 00909a47
    i test different things...
    - used another USB-port
    - used another PC
    - used macbook of my wife instead PC
    - deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
    - use another USB-Cable...
    I'm resigned, Please help me..
    Tom

    AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
    In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
    Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

  • HT1369 I have a new iPod and cannot get my music loaded on to it. The computer says it's not connected, and then it says it is synced but there's still no mucis on it.

    I have a new iPod and cannot get my music loaded on to it. The computer says it's not connected, and then it says it is synced but there's still no mucis on it.

    If that's not a real email, you need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (99730)

  • TS1425 why is my ipod "connecting" and then "ejecting" before it syncs?

    why is my ipod "connecting" and then "ejecting" before it syncs?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    For the Home buttton try:
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch

  • TS1474 I accidently connected and synced on my mums itunes on her computer. I then did my best to delete of that computers ITUNES. She now has my updates on her APP store. How can i take this away? Thanks

    I accidently connected and synced on my mums itunes on her computer. I then did my best to delete of that computers ITUNES. She now has my updates on her APP store. How can i take this away? Thanks

    That happened to my brother earlier. He went into Facebooand then into another app and the same thing happened. he ended up having to restore it. Mine stayed with the Apple logo for a bit but its back to normal after pressing the buttons a million times. I hope you get your problem sorted. Goodluck!

  • My iTunes library is on a PC, includes items purchases from Apple but a lot that are not.  Can I sync the entire library (Apple purchases and others) with my iPAD and how?

    My itunes library is on my PC.  It has Apple purchased and other music.  Can I sync everything with my iPAD and how?  I'm having difficulties getting the "non-Apple" music sync'd.

    You should be able to sync them from your computer's iTunes to your iPad and/or iPhone. Connect your iPad or iPhone to your computer and select it on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via control-S on a PC), and then use the Music tab on the right-hand side of the iTunes to select and sync the music that you want in the iPad/iPhone's Music app
    Syncing media : http://support.apple.com/kb/HT1351

  • My iphone5 freezes my iTunes v11 when connected and I cannot sync or do anything. I have reinstalled iTunes, tried different USB ports, ran diagnostics and said phone not recognised. Please help as have wasted nearly a day and a half trying to sort!

    My iphone5 freezes my iTunes v11 when connected and I cannot sync or do anything. I have reinstalled iTunes, tried different USB ports, ran diagnostics and said phone not recognised. Please help as have wasted nearly a day and a half trying to sort and at wits end!

    To double check you tried everything http://support.apple.com/kb/TS1538

  • After a diagnostic check for both connectivity and sync, we may have a conflict.

    fellow iPod classic owners,
                                          after a diagnostic check in which my iPod was found to be connected, on the sync test it was found to not be there. it appears that something is very amiss here. now granted i am not a whiz kid, but when one test tells you that you are connected and the next tells you that you're not, who do you believe? i smell a conflict of some kind or some such thing. clearly we have issues here. i don't know where else to turn. anyone have any ideas? both tests are part of the help tab on the iTunes page. it seemed reasonable to start here, but there is a conflict in the test results.
                                                                                                                                                                      awaiting your comments,
                                                                                                                                                                          hardphil.

    mancave4me,
                        the answer to the question is yes/and yes again. with one comes the other. i still have the problem even after uninstalling and reinstalling the apple apps. it's a thing which plagues pc users. it isn't an issue for my hp laptop however and that intrigues me. i'm no whiz kid with this stuff, but when you pass the connectivity test and it says your iPod is there. then, you fail the sync test because it tells you it is not there. somethings amiss at the circle k. i smell conflict. this is easily solved. just use my laptop for iTunes unless you have a working solution.
    that's the way i see this. it's not the end of the world by a far stretch. let me know if you have a solution. thanks for your concern.                                                                                               sincerely, hardphil.

  • I have an iPhone 4 which is synced with a non apple laptop and wish to sync it with my new iMac.  I have backed the phone up with the laptop and am not sure how to sync it with the iMac without loosing any contacts, emails or photos from my phone.

    I have an iphone 4 which is currently synced with a non apple laptop and I wish to sync it with my new imac.  I have just backed the phone up on my laptop but am not sure what I need to do now.  I do not want to loose any contacts, emails or photos from my phone when I change sync computers.  Can anyone assist with a step by step guide as to how to achieve this oucome?  Thanks in advance.

    Have you read this?
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
    Switch 101: Migrate your Windows files or system to your Mac
    http://support.apple.com/kb/HT2518

  • When I try to sign in with my Apple ID and password, it says I can not sign in.  To check my network connection and try again.

    When I try to sign in with my Apple ID and password, it says I can not sign in. To check my network connection and try again.
    I am connected to my home wifi network. Why can't I sign in??

    Not sure, but iAd Producer probably has nothing to do with this.
    Did you try posting in a forum that discusses iPhone, or FaceTime, or networking?
    I searched and this looks like the best fit : https://discussions.apple.com/community/iphone/using_iphone
    -M

  • I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV.  I have checked all connections and the video is xlnt.  Have also toggled thru every possible Dolby/Audio combination in settings.  Help!  Any suggestions?

    I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV.  Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt.  Have also toggled thru all possible Dolby/Audio combinations in settings.  Help!  Any suggestions?

    Hello again Parker -
    The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor.  To that I added the Apple TV.  The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor. 
    [I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
    So now I have:
         HDMI from the Cable Box to the Receiver
         HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
         HDMI from the Receiver to the Monitor
         RCA's from the Receiver to the Subwoofer and the other speakers
    In addition I have some backup connections:
         S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
         S-Video from the Receiver to the Monitor
    Wait - JUST FOUND IT! 
    By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links.  The video moved but the audio didn't.  Turns out the monitor was using the optical audio feed from the receiver.  So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
    So I first connected an optical audio feed from the ATV to the receiver - Audio!  Then I pulled it, but the audio didn't switch to the HDMI feed.  It stopped.  Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
    This is becoming a career!  Any suggestions?
    Will

  • I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

    Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

  • TS1814 I had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    -Griff W.

  • If I have a new apple ID and password do I lose all of my old apps if I sync under the new apple ID?

    If I have a new apple ID and password, do I lose all of my old apps if I sync to my new apple ID?

    I'll ask my question differently. I have multiple devices and I sync them to my itunes account. For one of my devices, I gave it to a family member. I changed my itunes password and did not give it to the family member who has one of my devices. Will they be able to update applicable apps not having the new password?
    Also, if that family member opens their own itunes account and purchase apps and sync the phone, will they lose all the apps that was purchased from my itunes account?

  • My iPad won't restore I've connected it to my mac, it goes thru the whole process of restoring and at the last bit my laptop tell me my device is no longer connected n on my iPad the apple sign comes up but the line doesn't load

    please help ive tryed everything and i cant get my ipad to restore, ive discontecting it, defult starting it and no matter what my laptop keeps telling me that "this device is no longer connected " and on my ipad the apple logo comes up but the bar does not load please help !!!! i need my ipad for lectures

    Hi rhiess,
    Thanks for visiting Apple Support Communities.
    It sounds like your iPad may not have restored fully. I'd recommend restoring it again with the iPad in recovery mode.
    Use the steps in this article to place your iPad in recovery mode:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    After placing your iPad in recovery mode, use the steps in this article to troubleshoot the connection between it and your computer:
    iOS: Troubleshooting USB connection
    http://support.apple.com/kb/TS1286
    If you still don't see your device in iTunes, follow these steps for Mac or these for Windows.
    Best Regards,
    Jeremy

Maybe you are looking for

  • Several errors of the form [drm:.... ] *ERROR*, especially checksum

    Hello to all, I am new to Arch Linux and not that experienced in Linux. But I want to learn more. In fact, I have learned a lot since I switched from Fedora to Arch. I will straight away go to my problem: As indicated in the subject, I have noticed s

  • Problem with the Zen Vision

    So I go to turn on my Zen Vision: M this afternoon. It was working fine all day. However, this time it did not turn on. Instead it displayed an icon on the screen. It shows the Zen with a caution sign beside it. This Icon still remains on the screen.

  • Error in transaction FNB1

    Hi while trying to execute the transaction FNB1 I am getting the error : Table TZB06 not maintained     Message no. 67102 I am using the product type 33B and have the flow type is 1001. Current status in contract. I have done the config at Loans Mana

  • I am getting an error message when I try to sign into My Verizon

    I've tried to sign into my My Verizon, but I get this message. Can anyone help? the activity you are trying to perform is currently unavailable. please try again later

  • VI only runs in "lightbulb mode"

    I'm trying to run a VI that interfaces with a couple of external devices [one connected over a serial port (via a USB-to-Serial Port converter) and the other using GPIB (via a USB-to-GPIB converter].  I'm using the converters because my [newer] lapto