Connecting Apple TV 2 to 802.1x network

I am trying to use my apple tv 2 at school, which has an 802.1x network and none of the security settings give me the option to type in my username and password. does anyone know how to do this?

I've never used 802.1X networks.
Say you had an iphone or ipad and wanted to connect - how would you enter the username?
If the support is there in iOS it may just need enabling for AppleTV.
Send feedback here:
http://www.apple.com/feedback/appletv.html

Similar Messages

  • HT2822 Can i connect Apple TV to my iPhone 5 network

    Can i connect Apple TV to my iPhone 5 network

    I've not tried it, but it should work - Personal hotspot wifi should use WPA2 Personal encryption and g or n speeds.
    http://support.apple.com/kb/ht4517
    Not sure if iPhone would work as a router to connect several devices eg computer via wifi to allow itunes content on computer to stream to appletv.
    I've used a mifi 3G device to accomplish this kind of thing in the past.
    AC

  • Connect Apple TV to PC ad hoc network

    my PC wifi ad hoc is not listing up in Apple TV (3rd Gen) wifi networks, but it's working on my iPhone. i have searched in google and apple portal, they says it won't work with adhoc networks, if it's true will return back the Apple TV

    did the google'
    https://discussions.apple.com/thread/4003835?start=0&tstart=0
    more hits
    https://www.google.dk/search?source=ig&hl=en&rlz=1G1TSEH_ENDK367&q=Connect+Apple +TV+to+ad+hoc+network&oq=Connect+Apple+TV+to+ad+hoc+network&gs_l=igoogle.3..0.13 51094.1351094.0.1351539.1.1.0.0.0.0.108.108.0j1.1.0...0.0...1ac.1.sKDJ0Gkm0Pk

  • My MBP doesn't connect to 802.11n networks

    Software Versions:
    Menu Extra: 6.2 (620.24)
    configd plug-in: 6.2 (620.15.1)
    System Profiler: 6.0 (600.9)
    Network Preference: 6.2 (620.24)
    AirPort Utility: 5.4.2 (542.23)
    IO80211 Family: 3.1 (310.6)
    Interfaces:
    en1:
    Card Type: AirPort Extreme
    Firmware Version: Atheros 5416: 2.0.19.8
    Locale: Korea
    Country Code: KR
    Supported PHY Modes: 802.11 a/b/g
    Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 149, 153, 157, 161
    Status: Connected
    Current Network Information:
    SSD87:
    PHY Mode: 802.11g
    BSSID: 0:25:bc:8a:3f:51
    Channel: 11
    Network Type: Infrastructure
    Security: WPA2 Personal
    Signal / Noise: -58 dBm / -96 dBm
    Transmit Rate: 54
    Other Local Wireless Networks:
    SSD875G:
    PHY Mode: 802.11n
    BSSID: 0:25:bc:8a:3f:52
    Channel: 157
    Network Type: Infrastructure
    Security: WPA2 Personal
    Signal / Noise: -55 dBm / -96 dBm
    SSD875G:
    PHY Mode: 802.11n
    BSSID: 0:1f:5b:86:e9:74
    Channel: 157
    Network Type: Infrastructure
    Security: WPA2 Personal
    Signal / Noise: -58 dBm / -96 dBm
    ==============================================
    From the information above, my MBP doesn't access 802.11n network after install Mac OS X 10.6 Snow Leopard and all of updates.
    Snow Leopard changes Phy mode of 'Atheros 802.11n WL card' to 802.11g, and It works fine as 11n under 10.5.8 Leopard.
    What makes this situation?
    Message was edited by: xeon.thebrick

    defecta wrote:
    So by the virtue of my MacBook being compliant with the 802.11d standard I am open to these issues? And from the way you are explaining it it sounds like Apple is ahead of the curve with implementing 802.11d compliance?
    They're not ahead of the curve +per se+, but as an example many Windows XP machines are behind the curve if you will.
    Would it be legal to write an app or driver that you can set ignore certain problem country codes when you want it to? Because something like this would help my issue also rather than playing lotto each time I turn my MacBook on or wake it from sleep, hoping it will see my wireless network first.
    Unfortunately, I'm not a lawyer and not in Australia so I couldn't begin to guess at what is legal and what's not in this arena.
    However, there is no interface to the driver to be able to manually set a country code, so the point may be moot.
    I don't know what kisMAC can and cannot display, but the country code is broadcast within the 802.11 beacon frame and/or probe response frame if the frame's dot11MultiDomainCapabilityEnabled option is true, so you may want to try looking at its output of beacon frames.
    Three octets make up the country code - the two character country code and a third octet which is one of:
        * An ASCII space character (0x20) if the regulations under which the 802.11 station is operating encompass all environments in the country.
        * An ASCII ‘O’ character (0x4F) if the regulations under which the 802.11 station is operating are for an outdoor environment only.
        * An ASCII ‘I’ character (0x49) if the regulations under which the 802.11 station is operating are for an indoor environment only.
    The way the 802.11d standard specifies this all works is:
    9.9.1 Operation upon entering a regulatory domain
    A STA that is enabled for operation across regulatory domains shall default to passive scanning when it has lost connectivity with its ESS. Passive scanning is performed using only the receive capabilities of the station and is, thus, compatible with regulatory requirements. The timeout for determining the loss of connectivity is system dependent and beyond the scope of this standard.
    When a STA enters a regulatory domain, it shall passively scan to learn at least one valid channel, i.e., a channel upon which it detects IEEE Std 802.11 frames. The Beacon frame contains information on the country code, the maximum allowable transmit power, and the channels to be used for the regulatory domain. Optionally, the Beacon frame may also include, on a periodic basis, the regulatory information that would be returned in a Probe Response frame. Once the STA has acquired the information so that it is able to meet the transmit requirements of the regulatory domain, it shall transmit a Probe Request to an AP to gain the additional regulatory domain information contained in the Probe Response frame, unless the information was previously received in a Beacon fame. The STA then has sufficient information available to configure its PHY for operation in the regulatory domain.
    http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=946610&userType=inst
    Note that this spec dates to 2001, so it's hardly something "new," just something that wasn't necessarily widely supported.

  • I have a dualband Airport Express. Why is my Macbook air default connecting to the 802.11g network instead of the n one?

    I'm using a dualband Airport Express:
    http://www.apple.com/airport-express/specs/
    Recently, I've noticed that my wi-fi speeds vary alot. I went into About this Mac---> System info -----> system report and went to wi-fi. Turns out it says my current configuration is on the 802.11g network. Under other connections, it lists my identical wi-fi as 802.11n.
    How can i make it connect to the 802.11n connection by default?
    Much appreciated,

    G-band networks generally will have a stronger signal than n-band.
    Tell it to ignore the g network and only connect to the N-band network.
    Open Network System Prefs, select WiFi, and click Advanced...
    Click on the WiFi tab.
    Find you g-band network in the list and delete it.
    Check the box to Remember networks this computer has joined.

  • HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    See
    http://support.apple.com/kb/TS4215

  • HT4437 I bought a brand new iPad 3 and an Apple TV, both connected to the same wpa protected wifi network from home. It worked for a day, but when I woke up, the Apple TV couldn't be found anymore by neither iPad, MacBook or iPhone. Any clue? Thanks!

    I bought a brand new iPad 3 and an Apple TV, both connected to the same wpa protected wifi network from home. It worked for a day, but when I woke up, the Apple TV couldn't be found anymore by either iPad, MacBook or iPhone. Anybody a solution for this?

    Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
    Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
    Thanks again!

  • Connect Apple TV to ad hoc network

    I want to use AirParrot to mirror my Windows 7 to my Apple TV, but it doesn't connect a lot and is slow when I do it normally.
    So I decided to create an ad hoc network on my Windows 7 Machine in hopes that I could have my TV connect to it.  But it isn't showing up in the list of networks.  How can I have my ATV connect to the network?

    did the google'
    https://discussions.apple.com/thread/4003835?start=0&tstart=0
    more hits
    https://www.google.dk/search?source=ig&hl=en&rlz=1G1TSEH_ENDK367&q=Connect+Apple +TV+to+ad+hoc+network&oq=Connect+Apple+TV+to+ad+hoc+network&gs_l=igoogle.3..0.13 51094.1351094.0.1351539.1.1.0.0.0.0.108.108.0j1.1.0...0.0...1ac.1.sKDJ0Gkm0Pk

  • Connecting Apple TV to Livebox network

    I'm trying to connect Apple TV to and Orange Livebox wireless router. It sees the router , I enter the WEP key but it can't log onto the network. I'd really appreciate any tips on getting this sorted.

    Hello, What you need to do is go on your college's webpage and register your device using the Apple Tv's wireless ID (looks something like 69:f9:3c:6d:cb:00). Once you do that you can by-pass the webpage login, connect to the school's wifi, and you're good to go. I just did it myself.

  • Apple TV 2 is asking for network time before I can purchase a movie? Restarted it and still requesting network time. Wifi is connected and works. Any ideas?

    Apple TV 2 is asking for network time before I can purchase a movie? Even restarted it and still did the same thing.
    How do you fix this? My wifi is operating 100% connected and I can access the Itunes Movies etc. How do I get it to work again?

    Welcome to the Apple Community.
    If you've had it working previously, try restarting the Apple TV by removing ALL the cables for a 30 seconds, or a restore if the problem persists.

  • [connman] How to connect to 802.1x network

    Hello my friends,
    there is a 802.1x network at my university and I can´t connect to it.
    connmanctl> scan wifi
    Scan completed for wifi
    connmanctl> services
    uni_wlan wifi_xxxxxxxxxxxx_xxxxxxxxxxxxxxxx_managed_ieee8021x
    connmanctl> agent on
    Agent registered
    connmanctl> connect wifi_xxxxxxxxxxxx_xxxxxxxxxxxxxxxx_managed_ieee8021x
    Error /net/connman/service/wifi_xxxxxxxxxxxx_xxxxxxxxxxxxxxxx_managed_ieee8021x: Invalid arguments
    What could I do?

    Hm... My best guess is that you spelled wifi_x_x_managed_ieee8021x wrong. Thats the the same error I got when I spelled it wrong. AFAIK, it must be typed in correct case too. Other than that, there may be something in the wiki here: Connman, connecting to a protected access point
    It could also potentially be connman timing out, as per this github article. Although the article is for the raspberry pi, it should still be applicable to connman in general.
    Have a look and let us know if you still cannot connect.
    Last edited by JohnBobSmith (2015-02-20 18:58:58)

  • What is the optical output bit/sample rate of an Apple TV3 when using the wired network connection. 16/48 or 24/48.

    What is the optical output bit/sample rate of an Apple TV3 when using the wired network connection. 16/48 or 24/48.

    It doesn't matter what type of network connection it has its output is 16/48.

  • My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

    My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

    My MacBook Air won't load web pages from the internet. It will connect to phone hotspot and run fine. The apple store reset the library and network preferences and it ran fine for a little bit, now slow again. Any ideas?

  • Apple TV2 can't find my network connection after recent update?

    Why can't my Apple TV2 can't find my network connection after recent update?

    I had to update the software on my Airport Extreme then reset my apple tv and that resolved the issue for me.

  • Every Apple apps using Sandbox is loosing network connectivity after some time.

    Its strange, but after a while using application, application stop working. For example Mail.app. Its working fine for 5 minutes, but after that it stopped working. When Mail.app crash, I am not able to use Safari or connect via iTunes to App store.
    I already tried:
    - uninstall non Apple software
    - fixing permissions on startup disk
    - check filesystem of startup disk
    - reinstall Lion
    - update to 10.7.1
    Unfortunately nothing from this was working. Before upgrading to 10.7.1 I found out, that Lion was not able to connect to mixed up b+g wifi network. After changing to g only wifi network, it was working fine.
    Thanks for the help.

    Its strange, but after a while using application, application stop working. For example Mail.app. Its working fine for 5 minutes, but after that it stopped working. When Mail.app crash, I am not able to use Safari or connect via iTunes to App store.
    I already tried:
    - uninstall non Apple software
    - fixing permissions on startup disk
    - check filesystem of startup disk
    - reinstall Lion
    - update to 10.7.1
    Unfortunately nothing from this was working. Before upgrading to 10.7.1 I found out, that Lion was not able to connect to mixed up b+g wifi network. After changing to g only wifi network, it was working fine.
    Thanks for the help.

Maybe you are looking for

  • HP Officejet Pro 8600 e-All-in-One Printer - N911a printer assistant

    Hi!  So, I replaced an HP Officejet Pro 8600 e-All-in-One Plus with an HP Officejet Pro 8600 e-All-in-One Printer - N911. Subsequently the HP Printer Assistant desktop shortcut disappeared from my computer --  and apparently from the computer entirel

  • Installed iTunes 10.5.1, now my desktop icons are not showing up properly

    The icons that are effected are the taskbar icons at the bottom of the desktop. I use thes to open my programs. When I open itunes the icons will then show properly, but when I close iTunes they again look translucent and are hard to see.This has to

  • Z97g43 connect front panel audio to computer case

    I have z97g43. Front panel audio computer case to mainboard not work. i have connect: JAUD1 mainboard                     chassis ( all pin available connected ) mic_L                           mic_L mic_r                           mic_power headphon

  • Elements 9 Slideshow Audio File does not play completely

    How do I get an Elements 9 Slideshow to play an entier audio file?  Facts: The slideshow duration is greater than the audio file duration.  The audio file is an MP3 that fades and terminates prior to the 4:26 duration.  No "Trimming" is applied to th

  • Screen flashes when i start need for speed carbon and flatout 2

    hi... i have a macbok pro 15" mid 2012 with intel i7 4 gb ram intel hd graphics4000 384 mb 500 gb harddisk osx 10.8 when i run nfs carbon and faltout 2 my mac screen starts flashing rapidly.. anyone pls help