Connecting Apple TV, Smart TV (Panasonic) to Apple Airport Express

Hi,
I just want to make sure i have got most of this correct. I want to connect from my router (via hard wire ethernet) to my Apple Airport Express which will then serve to my stereo (change settings in airport utility and also extend my wireless) Cable goes into the WAN port. Then an ethernet cable from the Airport Express (LAN port) to my Apple TV which connects to the TV via HDMI.
All i then need to do is find a way of connecting my smart TV via ethernet, how can i do this?
For information the Apple TV, Express, Stereo and Panasonic TV are all about 4m away from the router and my iMAC. I can only run one ethernet cable to my entertainment collection under the edge of the carpet. I want to connect all my kit via ethernet hard wire as i know its faster and i have been having issues with the signal becoming interupted from other sources.
My printer is already wireless but is located next to my iMAC so will prob hard wire this
Thanks

You will need a small switch. Or you will need to use wireless on the ATV or the TV .. as long as the express is close that will work fine. Especially if you connect to the 5ghz.
But go into any computer store and buy a 5 port or 8 port 10/100 switch.. but you could also buy a faster one, gigabit which is more useful into the future.
Wire it without using both ports in the express.. connect everything to the switch rather than express and that will be fine.. especially if the main router is gigabit.
The switches will be $20 for the slower 100mbit and perhaps $50 for the gigabit..

Similar Messages

Does Apple allow functionality between Logic Pro and Airport Express

That's it... Does Apple allow functionality between Logic Pro and Airport Express.
If not, Why not. It seems like such a logical Apple type solution. I looked and find it difficult to believe nobody has asked the question...

There is your solution: http://www.rogueamoeba.com/airfoil/

Hi can i connect hifi digital and my home wifi to airport express.

Hi i have been thinking about adding my hifi and sony digital TV to my home network which consist of three mac computers and has a wifi internet connection. What are the advantages of using airport express over bluetooth hardware. Using the male single plug on the airport express what is the sound clarity like from my Iphone. At present it is not very good using earphone jack on my Iphone 4 to Hifi. Will it improve with airport express. What is the difference between airport express and extreem. Lots of questions maybe a few answers. thankyou Paul

Re Airport Express. I use one of these to play Apple Lossless files through my hifi. The stereo connector on the Express is capable of both analogue and digital output. To use the analogue output - which is the same from standard stereo equipment like CD Tape players, and iPhone headphone connector, use the standard plug with the appropriate connectors for your amplifier. To use the digital output, you will need to use a toslink cable - AND your amplifier will need to have a digital in port. The toslink will need to have a connector that fits inside the connector on the Express ( it is a bit longer than the usual stereo / headphone jack and allows the laser light inside the Express to shine down the cable to the amp - which may have a slightly different connector and require an attachment to the end of the tosling cable. If your amp does not have a digital connector - my does not - then you could purchase a stand alone DAC that takes the laser light and converts it to analogue output. These can vary in price substantially but MAY givea better sound - depending on the quality of the DAC and the quality of the amp. The Express has a built in DAC that is used if you use the standard stereo cable, and by-passed if you use the toslink cable.
Quality
The difference in quality will depend on the type of files you are using, your amp and your speakers.
MP3 files may not sound any different, but Apple Lossless or FLAC files which are much higher quality MAY - or MAY NOT - sound better using toslink cable and the DAC compared to using the analogue output and standard stereo cable from the Express.
Personally, I use Apple Lossless files from iTunes and the analogue output from the Express into Rega Amp and Royd Speakers and I'm very pleased with the sound. I have considered using an stand alone DAC but feel the extra expense is not worth it in my case. You could start with the same setup and see how it sounds to you. The quality is difinitely very good and you can add the toslink cable and DAC later. The latest Airport Express may contain an even better DAC than earlier versions so may sound even better.
If you have an iPhone, you can use Apples Remote app to control iTunes on your Mac, to choose music,change track, change volume etc. This all works over the wifi network. You can also stream music directly from your iPhone - or your friend's iPhone - to the Express over the wifi network.
I have my MacBook Pro in my office space, 15 metres away in the next room, my Express and stereo in the living room and my iPhone in my hand on the couch and I'm delighted with the flexibility and the sound.
I have no experience with bluetooth for sound.

Devices not connecting to the "extended wifi" (i.e. Airport Express)

Hi,
Let me quickly describe my network setup. Attached to a Motorola cable modem (TWC) is an Airport Extreme (upstairs), firmware 7.6.4, to create a wireless network. Then, downstairs, to extend the network I have 3 Airport Express' (same firmware), all set to "Extend a wireless network". I should also add that while I don't exactly know when they were manufactured, my Airport Extreme is the dual-band version, and I believe so are all my Airport Extremes. I juse Airport Utility 6.3.2. All seems to be working just fine - all green lines, no warnings or errors.
When I look at my different devices and check which Airport they are connected to - I use the Airport Utility to check - here's what I find:
- Connected to the Airport Extreme are a total 7 devices, including a Mac, iPhone 4S, iPad and (cough) an Android tablet;
- Connected to the first Airport Express are 2 devices - another iPad and an Apple TV
- Connected to the other 2 Airport Expresses are connected... nothing.
Here's the thing: some of my devices get a pretty lousy signal (e.g. my phone downstairs). I would expect them to connect to one of the Airport Express downstairs - hey, I'm even in the same room! But even if I shut down and reboot the phone, it will connect to the Airport Express upstairs (which yield a weak signal). Same for my Macbook. So my internet on some devices is really quite slow, despite having enough wireless devices to power a whole neighborhood....
Any idea what could be behind this? Or is this "normal behavior"? As said, everything is working without error, I just suspect that the speed is suffering more than it should.
Thoughts, help or comments would be appreciated,
Phili

Yes, it is cumbersone over the internet.
What version of Airport Express units do you have ?
The 1st generation "n" or the newer 2nd generation that is the current model ?
1st generation
http://store.apple.com/us/product/FB321LL/A/refurbished-airport-express-base-sta tion-with-80211n-and-airtunes
2nd generation
http://store.apple.com/us/product/FC414LL/A/airport-express-base-station-june-20 12
The 1st generation is NOT simultaneous Dual band. It will only do 2.4 or 5 GHz at a time.
I went through this before with my older versions. (not the old 'g' version though at this time)
Some of my devices would only connect to the main base station because they wanted 2.4 GHz but that band on the Express was already being used by a 5 GHz device.
A few weeks ago I finally replaced the 'n' version with the newest version which has "Simultaneous" dual bands.
Now everything works the way I want it to.
Just throwing some ideas out for you to think about.

I reset my airport express to factory settings, reconfigured it and then try to play it and this message popped up. Where do I go from here? An unknown error (-15006) occurred while connecting to the AirPlay device "John Knox's AirPort Express".

I reset my airport express to factory settings, reconfigured it and then try to play it and this message popped up. Where do I go from here? "An unknown error (-15006) occurred while connecting to the AirPlay device “John Knox's AirPort Express”.

No more need for an answer... the problem has been solved!

Apple Tv can't connect to iTunes when on same network through Airport Express

Hello All,
Its very rare i need to resort to the community for help but this one has me in a corner.
I have a 2013 Airport Time Capsule (3TB not that it matters), and a 2nd Gen Airport Express, and 2 Apple TV's (3rd gens).
Time capsule in basement of a large home. I can connect to the time capsule with iPhone 6, 4s, iPad 4, macbook air (2013 model), MBP (2012), mostly without issue however from time to time the signal gets kind of weak and cuts off occasionally from the iPad. Slows down a bit for the phones also. Not a huge deal, this is why I bought the airport express.
The Apple TV's are in two bedrooms beside each other on the 2nd floor in my home (office and bedroom). The Airport Express i've tried in 3 different areas of the house (1- Main floor of home on top of fridge in kitchen, roughly 20 feet away from the time capsule through the floor, 2- Main floor at bottom of stairs heading up to 2nd floor and almost line of sight to doorways of the two bedrooms also 20 feet away from the time cause through the floor, 3- 2nd floor hardwired directly to one apple tv (2nd apple tv through double layer of drywall and 10 feet away.)
In any of these locations the Apple TV's randomly get this issue where they do not see my Mac Mini which is hardwired to the time capsule, and running iTunes with all my movies shows and music of course. It gives me an error "Apple TV cannot connect to (name of library) as it may not be on the same network, please ensure iTunes is updated to the most recent version, and ensure you have the latest updates for your apple tv."
On my MBP I was running Yosemite Dev Beta 8, which is fine if that doesn't work, but it did and still had this random issue.
On my Mac Mini i was still running Mavericks with current iTunes (11.4 i believe, now 12 beta).
I unplugged my airport Express from power, now everything is connecting to my time capsule and apple tv's stream fine mostly, however there are slow buffering issues and occasional wifi disconnects just due to 2 floors in-between and quite a distance also, among multiple wireless devices using the network.
My questions are (yea yea a novel i know),
1- If the airport express doesn't see any data going through it for a while, does it go into a sleep mode which might be causing this "iTunes not found" issue even though other devices are still able to see my shared library on my network?
2- If yes to above - how can i shut that off?
3- If no, then why is this happening?
Mac Mini specs, i5 2.5ghz, 16 gb ram, 120gb ssd, 500 gb hdd, 2 TB External USB 3 hdd, ethernet hardwired to time capsule.
Air Port Express is in extended network mode synced to the Time Capsule.
Other devices will connect fine to my iTunes library when the apple tv's will not.
Any help appreciated! Thanks!

My questions are (yea yea a novel i know),
1- If the airport express doesn't see any data going through it for a while, does it go into a sleep mode which might be causing this "iTunes not found" issue even though other devices are still able to see my shared library on my network?
I have seen suggestions that bonjour goes into sleep mode.. but Apple offers no info and no controls so whether it does or not is irrelevant.
I am not clear what Time Capsule you have.. 2013 was the change over.. so is it AC tall one.. or previous model, flat one. The picture in the airport utility will show you.
Extend wireless is always a poor way to do things.. can you run some ethernet cabling to a point on the first floor where you could plug in an express.. if so that is the ideal.. if no, then using EOP (homeplug) adapters might work,, but they are not 100% guaranteed to work so make sure you know the return policy.
My experience is with the one extend wireless link that i do have .. it is fragile. Mostly it works.. but i have spent a deal of time making it work.
eg.. I use short names and different names for both bands.. so i can force the connection.. I set fixed channels.. I use the right firmware.. even so at certain times.. (full moon, strong North Wind.. you know typical wireless).. it will decide it won't work.
NOTE.. only airport utility v5 is of use to show link speeds and how things are going.. v6 airport utility (toyland fisher price version) has link status as poor, good or excellent.. which is to say the least.. uninformative.
so here is the link in v6 ..
It says.. good.. yeah.. !!
And here is the info in v5 utility. It has a workmen utility feel to it with piles of info.
The link between the two routers is the top of the listing.. and tells me it is linked at 5ghz and is running at 60Mbps at both ends..
By trial and error I have found left to its own devices it will connect on 2.4ghz and will join at 6Mbps when it starts dropping out.. so by taking full manual control I can produce reasonable link speed and reasonable stability.. and in v5 utility I can tell what is going on.. none of this is easy or like it should work out of the box.

How to set up a Time Capsule to extend a non-Apple router and play tunes to an Airport Express?

I have an older Time capsule that I would like to give my sister in order to extend her CenturyLink wifi. I can connect via ethernet but she would like to play music thru an Airport Express at the stereo system.
My question is: would it be better to extend the existing wi-fi network (to the upstairs part of the house) OR set up a new Apple network with the Time Capsule linked to the Airport Express. This is the way I currently have my own network....in a smaller house.

I have an older Time capsule that I would like to give my sister in order to extend her CenturyLink wifi
The Time Capsule is not compatible with a CenturyLink device if you plan to "extend" using wireless only.
You will need to connect the Time Capsule to the CenturyLink modem/router using an Ethernet cable. Then, configure the Time Capsule to "create a wireless network".
The AirPort Express could then be used for AirTunes by receiving the signal from the Time Capsule.
If the AIrPort Express is a newer 802.11n version, then it could also be configured to "extend" the wireless signal of the Time Capsule to provide more wireless coverage, in addition to use for AirTunes.
If you plan to keep the wireless on for the CenturyLink gateway, make sure that the Time Capsule is separated by at least 6-7 feet to help minimize the chances of wireless interference between two routers.

Apple TV Inference with Time Capsule and Airport express?

I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
The TC and AE are configured to join my existing network....and have happy sat there for a few years.
I would really welcome any ideas.
Thanks
R

Welcome to the discussions!
It sounds like you have the basic configuration covered correctly.
You might want to check some settings on the TC:
Wireless Mode would be create a wireless network
"Allow this network to be extended" should be checked
The AX should be set to "extend a wireless network"
The "allow wireless clients" box should be checked
In this configuration, the ethernet port on the AX is active so things should work.
A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
Please post back with your results.

Apple TV 3rd Gen no longer sees Airport Express 1st gen in Airplay after update

Apple TV 3rd gen was connected to AirPort Express 1st gen via WiFi, drove a video device via HDMI
and sent audio to the AirPort using Airplay and selecting the AirPort Express under Speakers.
I could adjust the volume with the AppleTV remote.
Apple TV was stored unused for a while.
After powering on yesterday, I ran the update.
Now Apple TV is connected to the Airport Express via WiFi
but Airport Express doesn't show in AirPlay settings.
I can still use AirPlay from my MacBook running Snow Leopard.
There are no updates available for the AirPort

Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Apple TV sync disrupts AirTunes streaming to airport express

Whenever my Apple TV is syncing with iTunes it disrupts my AirTunes stream to my airport express - the audio just stops playing.
Is there a way to fix this? Perhaps slow down the Apple TV sync so it doesn't suck up all the bandwidth so my airtunes stream keeps playing? Not sure if that's really the problem though.
Thanks for the help.

Yes, they ditched this useful feature with AppleTV2.
Send feedback:
http://www.apple.com/feedback/appletv.html
AC

I want to buy airport express, but i need to know if my sony smart tv can connect with it?, i want to buy airport express, but i need to know if my sony smart tv can connect with it?

i want to buy airport express for my ipad and iphone, but i need to know if my sony smart tv and my sister's phone can connect with it?

It would be difficult to guarentee that all wireless devices can connect to the AirPort Express Base Station (AX), so at best, your Sony Smart TV and your sister's phone SHOULD be able to connect ... as the AX is basically no different than any other manufacturers wireless router.

Streaming just audio, Apple TV or should I get an Airport Express?

I want to put some speakers in the kitchen so I can listen to music when I cook. I thought about getting an Airplay speaker but the more I thought about it the more it seemed like a better solution for someone like me was to get an Airplay-ready device and then pick out my own speakers.
So after doing a bit of research I'm tied between the Airport Express and the Apple TV. The Apple TV has more media functionality that I'd like but I'm not sure if I can get away with just plugging it into a set of speakers and controlling it from my iPad. Is there something about the Apple TV that makes it require a TV be attached, either something in the way you interact with it or a hardware/software requirement?
If not, I think it might be the better direction for me. I don't really need a second router in my apartment (I already have an Extreme) as my place isn't that big. It also means if I want to use the Apple TV for it's more traditional purposes sometime later, I can.

Thanks for the tip. I hadn't heard of people ever running the ATV in an audio-only mode but I did more Googling and it did seem to support that it could be done at certain points but never reliably. As such I think the APE is my best option.
Though, one correction is that the Express does allow for analog-out. From what I can tell it's the same port as on teh back of any Mac. I wonder if it does pass-through on Digital? That would be pretty nice...
Either way, thanks!

Does Apple list available printers that work with AirPort Express?

Just bought an AirPort Express hoping that I could print wirelessly with my HP 1350 All-in-One, and it won't work. Found out after the fact that my printer doesn't support USB wireless printing.
I'm looking for a basic color printer to work with AirPort Express for wireless printing by other family members, and I'll continue to use my HP 1350 with USB for scanning and OCR functions.
Does Apple provide a list of recommended printers that will work with AirPort Express?
Kevin
PowerBook G4 1.5 Ghz Mac OS X (10.4.8) 1 GB DDR SDRAM

No Apple doesn't any more.
I have been maintaining a community created list.
http://tech.ifelix.net/1013.html
This is an unofficial list of USB printers which are are compatible with the AirPort Extreme Base Station and Airport Express. Printers in bold have been added to the original list that Apple provided.
Printers in dark red are in fact the only printers I have personally tested.
Please also note that due to changes in the firmware of both the Airport Extreme base station and the introduction of the Airport Express some printers which are in this list may no longer in fact be compatible.

Can I disable my Verizon Fios Router Wireless radio, connect it to a switch and use my airport express as my wireless access point connected to an in wall ethernet port?

Here's the deal. I have a Verizon Fios MI424WR router. My house has CAT5 throughout the house. The media panel is located in the garage. I want to take the Verizon Fios Router and cannot it in the media panel so I can connect a switch to it, that way, all my CAT5 can fire throughout the house. Verizon being Verizon decided to connect the router directly in the office.
Can I go this route (Router in media panel, switch cross connect to it) and use Airport Express, connected to one of the in-wall CAT5 ports in my house and then set it up as my wireless access point to provide wifi to my portable devices (iPad, iPhone, Macbook)? Is this possible? Will Airport Express comminicate with my verizon router via ethernet in-wall? Do I have to turn off the wireless radio in the Verizon router? Any help would be greatly appreciated!

That is right, by hard wired I was just making clear wired vs wireless attachment. AirPort family of devices will only act in a repeater mode with their own family members, not FiOS routers. they have to be wired to work.
There are some useful docs you can download from Apple, Support, Manuals, Peripherals, AirPort (just follow thos links from the Support button on the top bar):
Apple AirPort Networks
Designing AirPort Networks
AirPort Express Setup Guide
The last has a diagram of what you are trying to do, though without the house wiring, etc., but the basic principle.

MacBook Pro loses wifi connection upon wake since I bought a new AirPort Express

Hi. I've been using Apple devices and computers since february 2008 and had no problems until now. I currently own an early 2011 13" MacBook Pro and a PC running Windows 7 and Ubuntu 12.10. Until early February, I used a 2nd gen AirPort Extreme to connect to wifi upstairs, being connected via Ethernet to my ISP's modem located downstairs which provides a weak wifi signal (of course my ISP says it's impossible since their modem is the best on the market), not even compatible with Apple's wifi systems (all other French ISPs modems are compatible with it), that's why I had to get a 30 ft ethernet cable running down the stairs. My connection was lost everytime I went upstairs/downstairs so I bought a new Airport Express to replace my ISP's modem wifi signal and I'm using my AirPort Extreme to extend the wifi network upstairs. Now all my devices and computers have a strong wifi signal anywhere in my house with only one downside: My MacBook Pro (and only it) loses the wifi connection upon wake after sleep and I have to disconnect/reconnect it manually. I didn't bother installing Windows on it as I removed the Superdrive to setup a DIY Fusion Drive a few months ago so I can no longer boot optical medias and I can't know if it's a hardware or software problem. Again, everything was working all right on it until I changed my Wifi network configuration a month ago when I bought my Airport Express.
Can anyone help me ?
Thanks in advance.

Well this isn't making sence.
What is the model # on your extreme?

Connecting Apple TV, Smart TV (Panasonic) to Apple Airport Express

Similar Messages

Maybe you are looking for