Connecting aqos 32 inch tv

I have conneted both a 19-inch monitor and 32 inch tv. I find when I siwtch the reolution of one, it affects that of the other. Turn the 19 inch monitor to a small resolution gives me more possibilities for the Aqous TV.
Assume that the G5 drives up to a total combined resolution...Ok.
When i find one I like, I turn the 19 inch display off and leave the TV on. fine.
Even can get rid of the monitor and just leave the TV connected. BUT, if I hit detect displays with the 19inch disconnected, the Aquos no longer can accept that screen resolution and goes dark....Unlike the 19inch display, whicxh seems smart. It gives an error message about the signal dimensions being incompatible UNTIL I have the TWO displays on and can adjust until noth are again displayable. I assume there are a fixed number of resolutions but without the display on, the Aquos screen does not let me see the settings. Do i leave the 19 inch display on (or at least avoid telling the mac to look again for the display ). I get the feeling that without the 19inch on, I can get more resolutions on the Aqous, but cannot see the Aquos settings without both on to start with.
Related question--when Macbook is connected, a different sort of probelm. Have both displays working (built in 15 inch) and TV, but if I close the MAC BOOK, I thought the TV would stay on while the MB stayed asleep.
Hmmmm
Simple solutions?
Thanks?
Paul

No matter what settings I have, when the computer is attached to two monitors and I try to set PC, if the main monitor is switched off, the TV (Sharp) forgets and tries to set to 85 herze, which does not work with the Mac. And so I have to re-connected to the other monitor, set to a lower resolution or frequency, and all is fine (until the same thing happens). My accidental solution--->
Set to DIGITAL AV, and the settingas are retained so I can disconnect the now uneeded monitor.
Still, why is it this way (I have to choose ZOOM) to get the best view?) Sharp USA gives me a standard answer to casll an 800 number.
I am in Japan, and Sharp Japan is not helpful. Just tell you to read the manual, but the manual mentions nothing about it.
Oi!

Similar Messages

What firewire will connect 27 inch IMac with Cannon GL2 digital camcorder

What firewire will connect 27 inch IMac with Cannon GL2 digital camcorder?

According to the Canon spec's a > 4 to 9 pin firewire cables is what you will need, provided that you have a slightly older 27" iMac that still has a FireWire 800 port.

Leads to Connect 24-inch Apple LED Display to my PowerPC

I have a Mac Desktop Dual 2 GHz PowerPC G5 Serial CK626*V5V with version 10.5.8. What lead will connect my just purchased 24-inch Apple LED Display to my PowerPC?
<Edited by Host>

What lead will connect my just purchased 24-inch Apple LED Display to my PowerPC?
Click here for one. The link is to a PDF. Aside from a converter such as this, a graphics card with a Mini DisplayPort is needed.
(50828)

Max resolution of '30 inch Apple Cinema Display'...?

When I connected 30 inch Apple Cinema Display, model M9179ZM/A, to an ATI Radeon X850 XT graphic card, I have failed to get higher resolution than 2048 x 1538 althought this graphic card is listed in the Technical Specification at www.apple.com/displays/specs.html as an appropriate card for driving this monitor.
Plese could anybody tell me where a mistake is?
Thanks.
PC Windows XP

Being compatible with the 24-inch Cinema Display and being able to use it at resolutions higher than 1280 by 800 doesn't necessarily mean that it can drive the 30-inch Cinema Display at its full resolution. You need to use a dual-link DVI connection as stated above.
(62751)

Error when rendering my file...

an output module failed. the file may be damaged or corrupted.(-1610153464), how can i fix

I'm having the same issue. None of the usual recommendations have helped. specs are below.
Thanks!
What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number. USING AE CC 2014.1.1
Have you installed the recent updates? (If not, you should. They fix a lot of problems.) YES, UPDATED NVIDIA K5000 DRIVER AND AE
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac". PC WINDOWS 8.1
If you are getting error message(s), what is the full text of the error message(s)? AFTER EFFECTS ERROR: RENDERING ERROR WHILE WRITING TO FILE "FILE PATH" AN OUTPUT MODULE FAILED. THE FILE IMAY BE DAMAGED OR CORRUPTED. (-1610153464)
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking? NEW COMP NO 3RD PARTY PLUGINS, SIMPLE SOLID IN 1920X1080 COMP, COMP ADDED TO RENDER QUE AS QUICKTIME H.264 100%.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time? NEVER WORKED
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected. INTEL ZEON CPU E-52690 V2 @3.00 GHZ 2 PROCESSORS, 56GB RAM, 64-BIT OS X64 BASED PROCESSOR, TWO CONNECTED 27 INCH MONITORS, NO EXTERAL DRIVES CONNECTED, STANDARD RAID DRIVE IN PC.
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)? CUDA K5000 CARD, RECENTLY UPDATED TO VERSION 340.84 (11.1)
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)? INVIDIA GRAPHICS CARD ONLY
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime"., NO SOURCE FOOTAGE, STRAIGHT SOLID ONLY IN COMP
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2".
What other software are you running?QUICKTIME 7.7.5
Do you have any third-party effects or codecs installed? NO
Are you using OpenGL features in After Effects? YES, TRIED WITH IT OFF ALSO
Does the problem only happen with your final output, RAM preview, or both? ONLY FINAL OUTPUT WITH QUICKTIME FORMATS
Are you using Render Multiple Frames Simultaneously multiprocessing? TRIED BOTH WITH AND WITHOUT
Are you using the ray-traced 3D renderer? NO
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help. 1920X1080 23.98 SQUARE PIXELS QUICKTIME H.264 100% 30 SECONDS LONG. EXPORT GETS 34 FRAMES IN ( NUMBER OF PROCESSORS BEING USED) BEFORE ERROR MESSAGE POPS UP. ALSO TRIED WITH ONLY TWO PROCESSORS RUNNING AND IT CRASHED AT FRAME 2

IMac 24 & firewire ?

One thing i noticed on the iMac spec page was the power to the fw bus on the 24". Was wondering what the implication might be ... anyone smart enough to clue me in ?
http://www.apple.com/imac/specs.html
"Peripheral connections
17-inch and 20-inch models
Two FireWire 400 ports; 8 watts shared
24-inch model
One FireWire 400 and one FireWire 800 port; 15 watts shared"
I've never seen Apple make that distinction before - aleays been just the types of ports and # of them. Never the power before.

Nothing implied. Apple has provided that information on most recent models, although it may have only been in the Tech Specs.
The bus power has been the same ever since FW was included on Macs. Each port can provide 7.5 watts or one port 15 watts if nothing is connected to the other port. There are similar limitations on the USB ports.

How can I connect my Early 2011" Macbook Pro 13" inch, with a generic Mini Display Port to HDMI connector, to a LG 32LD340 LCD TV, using Mountain Lion 10.8.2?

I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.

If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

How can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port

I have ask this question in the local shop but they could not answer me - how can i connect apple hd cinema display 30-inch DVI to my new notebook with HDMI port

I wasn't sure how the whole thing would have work but it seems thunderbolt also acts like mini display port. Thats sweet. I can now haply continue using my 30 inch apple display.
Thanks.

What adapater do I need to connect my mid 2007-2008 imac to a 20 inch apple cinema ?

Hello-
I have a Imac Mid Aug 2007 and just got a used 20 inch apple cinema screen and want to use it as my 2nd screen ? I have tried looking for the adapter but apple only has a mini port-dvi and I have 30 prongs on the cable on the end of the 20 inch apple display ? Best buy said it's to old and they don't have any adapters there. So i have to try apple, I know there are many people out there that have the apple cinema's but i just need to know what I can buy and where I can buy the connecter or adapter to plug them together so i have a 2nd screen .
Thank you very much

Hello, depends on which 20in Cinema, but likely...
Apple Mini-DVI to DVI Adapter
http://support.apple.com/kb/HT3235

Connecting MacBook Pro 13 inch to external LCD Display

I just got a new MacBook Pro 13 inch without retina display. I noticed the retina display comes with an HDMI port, but the one I got does not. It has the newest update to OS X Mountain Lion. The best external connector I could find was the Thunderbolt connector, but the TV I have is HDMI. So I went to Amazon and bought an HDMI Cable and a. HDMI-to-Thunderbolt Connector. I can now connect my MacBook to the TV, everything show up, but it's a little touchy with sizing. Does anyone know how to fix the sizing of the external screen, so that when i go full screen on the TV, the edges of the window are past the edges of the actual display? Right now, I can't seem to figure it out. Maybe I should try a different hookup?

Update: turn out, i figured out the sizing issues, it seems to be filling the screen perfectly now. But when i go full screen on one display, the other screen goes fullscreen on a gray screen. I can swipe between fullscreen apps, just like in a single display situation, but when i do, both screens switch. Is there a way top display one full screen app on the moniter and have the regular home screen display on my actual laptop?

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

2009 24-inch iMac 3.06GHz (EMC no. 2267). I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade? I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

What is the problem with 15-inch Macbook Pro model 2011 after connecting to TV with HDMI chord?

Today we connected a 15-inch Macbook Pro model 2011 with HDMI chord to an Insigna Television. We plugged and unplugged couple of times. But recently the macbook pro is having technical issues. The following symptoms are:
1. Macbook pro turns on and off
2. The screen stays blue and keeps loading but does not load to the desktop so you can't access to anywhere
3. The screen sometimes becomes fuzzy and the apple logo that shows before it loads to the desktop is fuzzy
4. Sometimes fuzzy lines appear on the screen like you see on television when there's a bad signal
5. The screen stays blue
6. Sometimes little specks appear on the screen
Only thing we did was turn it off and restart but it still leads to the same symptoms above.
Does anyone have any clue what caused this problem? I am guessing it is due to the connection to the HDMI chord, since we didn't turn the macbook on and off when we plugged it, rather we just unplugged and plugged the chord while the macbook is running.
Another theory might be watching movies from an online source but the first theory seems to make more sense.
We scheduled a meeting with the genius bar tomorrow but does anyone might have any clue? And also any ideas how to fix this? This is an emergency because there are important files on the macbook we didn't back up and we hope the files are safe and we need to use the macbook ASAP. Let us know anything that might have caused this and/or any solutions or help. That would be appreciated and thank you.

Hey there! Welcome to the Discrete GPU issue clube ... post your relate here >>> 2011 MacBook Pro and Discrete Graphics Card
And for GOD SAKE! Call Apple to tell them that you're another user with such problem ... that action can improve a future recall. BTW the fix price for your problem is around U$ 1000,00 ... that's the meaning of the recall attempt

What cable do I need to connect my 27 inch iMac to my Cinema Display

What cable do I need to connect my 27 inch iMac to my Cinema Display to have two displays?

It depends on what type(s) of video input you have on your TV. If you've an open HDMI port on your TV, you can use a Thunderbolt (Mini DisplayPort) to HDMI adapter and it will carry the sound also. See -> here.
Good luck,
Clinton

HT201938 connecting MacBook Pro (15-inch, Mid 2009) to Hisense TV with audio?!?!!?

hello everyone.
if anyone is familar with successfully getting the older macbook pros that dont support audio out to stream and preform digital audio on a TV or has any helpful information that will get me familiar with trying to successfully stream audio and visual. and can PLEASE HELP ME in any way to understand what they know and teach me how to solve my problem id really appreciate it.
i want to connect my MacBook Pro (15-inch, Mid 2009) to my Hisense LED LCD TV, ModelNumber:40H3E and getting digital audio sound from my TV as well as video, but have no clue on how or where to even start to successfully pairing the two and getting sound.
I own a MacBook Pro (15-inch, Mid 2009) this MacBook model doesnt support an HDMI port. My MacBooks model has the Mini Displayport which supports video out but does not support audio out. Can someone help me by telling me exactly which Mini DisplayPort to HDMI adapter with audio will support my model MacBook Pro (15-inch, Mid 2009) and exactly what HDMI wire do i need to buy that will successfully preform digital audio and sadisfying quality visual through TV?
i have NO expierence with the proccess have NO knowledge about any of this or these Mini DisplayPort to HDMI adapters with audio. i have no idea what kind of adapter and HDMI cord to buy that will give me sound from my tv for my type of macbook. '
im not familar AT ALL with any of this so i hope me giving you my MacBook Pros make and model and my TV's model number will be enough information for someone to help me.
just please give me anything you can on this topic
thank you so much,

These are user to user forums, your describing a serious hardware issue that needs to be serviced by Apple.
Good luck and I hope your issue gets resolved.

Connecting aqos 32 inch tv

Similar Messages

Maybe you are looking for