Connecting ASA from inside of the network

The LAN has 10.10.10.0/24 ip pool and ASA has 10.10.11.0/24 pool. When i connect to the ASA from the inside of the network , i can't get to any node in the network but i can when i am outside of the network. I need to connect to all nodes even when I am inside of the network connecting to ASA. please advise.

John,
Understand now, Hmmm.. indeed strange, this is what we could do to try isolating the problem and try confirming some local connectivity.
since 10.10.10.0/24 is routed through the ASA firewall 10.10.10.254 as all hosts default gateway load your asdm real time log and note traffic while trying to ping from user labtop to any other hosts on the same 10.10.10.0/24 segment, I am sure you have probably checked but from the users labtop have you verify machine is getting proper 10.10.10.x address with correct mask and DG given from ASA DHCP, if ASA is your inside DHCP server go to ASA command lline and issue.
asa#show dhcpd binding - to confirm hosts IP assigement is there for
try pinging from the ASA itself towards that particular users 10.10.10.X address to confirm local connectivity from asa to labtop.
Also from the labtop take note of complete output of ipconfig : and note all its current adapter bindings .
c:\ipconfig /all
It seems this could be more of a settings issues on the machines but confirm above.
Also what ASA code version ? show ver
and what version os VPN client ?
Rgds
Jorge

Similar Messages

  • Hi i want to buy an ipad from america with cellular and i want to connect it in jordan does the network work in my country JORDAN , because i dont see unlock ipad??

    hi i want to buy an ipad from america with cellular and i want to connect it in jordan does the network work in my country JORDAN , because i dont see unlock ipad in apple store??
    in apple store no ipad unlock for cellular if i bring it with cellular from america does it work in JORDAN ??
    THNANK ALOT

    US iPads are not locked to a carrier. Don't buy a Verizon or Sprint model, though.
    Regards.

  • My apple extreme wireless network is working fine with the macs but ios devices (iPhone & iPad) will not connect. I can see the network though. Everything was working until the ISP went down. Any suggestions?

    My apple extreme wireless network is working fine with two Macs but ios devices (iPhone & iPad) will not connect. I can see the network and it's telling me I'm connected but Safari says I'm not connected to the internet. Everything was working until the ISP went down. Any suggestions?

    Thank you, I've tried the support tips (resetting the network, checking security settings, etc.) and rebooting the network devices several times to no avail. I've actually been working on this for several days (when I can afford to have the network down).
    What I have to determine is what has changed in the setup...from when it WAS working just fine with all devices.

  • How do I add a printer connected to another iMac on the network to my printer list?

    How do I add an Epson printer connected to an iMac on the network to the printer list on my MacBook Pro? I cannot get it to show up in the list for printers to add.

    That only works if the printer is itself a network printer. You can't do it if it is directly connected to another computer on the network unless it is configured to be a Shared Printer on the other computer.

  • We have a PC with iTunes that needs the hard drive reformatted. Right now, it can't connect to other computers on the network. Can I save my music to a thumb drive, then re-load when the computer is reformatted?

    We have a Windows XP desktop with iTunes for windows. The hard drive needs to be reformatted. Right now, the computer will not connect to other computers on the network. Can I save my iTunes songs to a thumbdrive, then re-load after reformatting?  How do I do it?

    Copy the entire iTunes folder out to the drive. If it is too big to go as one copy stuff over to another computer in batches. It is important to have not only the media but the library file in order to properly restore your library.
    See also this User Tip. Assuming the machine won't connect to the internet you could download the SyncToy installer on another machine and then transfer it with the thumb drive. If it will connect to the net don't forget to deauthorize the machine before reformatting the hard drive.
    tt2

  • Connecting to other computers on the network

    I just replaced an older Belkin wireless router with the new Airport extreme. I like it very much but I cannot now figure out how to connect to other computers on the network. With the old router I just clicked on network in the finder window and all the other computers on the network showed up an dI could click on one to connect. Now I see notheng. Any ideas????

    I'm getting the same problem. I used to have the snow AEBS, but about 2 weeks ago I got the new one. Never had a problem connecting to my other macs in the house through network in the finder... now, no other machines show up.
    Because there's no communication or recognition of devices through AEBS, wireless printing goes out the door too. My printer is plugged in by ethernet to my house network. If I am connected by ethernet to my network, I can print, but if it's wireless, nope.
    Today, I got the apple tv. I was super excited unboxing it, hooking it up... and then when I go to sync up through itunes... oh wait, it doesn't show up in the devices list because of my AEBS problem.
    Anyone have any ideas? I would love to play around with apple tv so please help... thanks.

  • HT1768 itunes could not connect to itunes store.  The network connection timed out.  Make sure your network settings are correct and your network connection is active, then try again.

    I keep getting this error message when I try to log into Itunes, has anyone else seen this error?  If so how did you fix it?
    Itunes could not connect to itunes store.  The network connection timed out.  Make sure your network settings are correct and your network connection is active, and try again. 

    Have you disabled any firewall and security/antivirus programs?  This seems to have helped the vast majority of people who have posted the same problem in this forum.

  • Cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy.

    cannot connect to Net, have done for last 12 months no problem, I have other apple products that are connecting to the same hub happily. The hub is seen and the signal is strong, it just doesn't connect. I have reset the network settings with no joy. Any help much appreciated?

    Try restarting your WiFi router by removing power to it for 30 seconds.

  • Can not connect to other macs on the network.

    Hi,
    I am having an issue with a G5 Tower running 10.5.8 failing to connect to other macs on the network. I try to connect to our xserver and any other mac I get an error message that reads ‘EMSG_CONNECTION_FAILED’.
    Anyone have any ideas?
    Many thanks in advance,
    pvteyes99 

    Turns out the 'node' on the hub had failed completely, ethernet cable was OK.

  • HT200160 recently spent money on downloading 8.2 and now i have no connectivity to three MacBooks in the network only Time Machine

    recently spent money on downloading 8.2 and now i have no connectivity to three MacBooks in the network only Time Machine

    recently spent money on downloading 8.2 and now i have no connectivity to three MacBooks in the network only Time Machine

  • I have purchased my i phone 5 one month back, unfortunately I have got some hardware problem like some part has been broken from inside, but the phone works without any issue, Did anybody face this issue?

    I have purchased my i phone 5 one month back, unfortunately I have got some hardware problem like some part has been broken from inside, but the phone works without any issue, Did anybody face this issue?

    If you believe there is a hardware problem, call AppleCare or make an appointment at an Apple Store if there is one nearby.

  • Itunes could not connect to Itunes store. The network timed out.

    Hi
    when i'm try to go on to the itunes store, i get this message
    "Itunes could not connect to Itunes store. The network timed out."
    I can surf the web fine.
    I've problems for two days now. I phone apple care they said "sorry I can't help" and hanged up on me, so that was helpful
    Hope someone can help
    thank you!

    I had the same problem !
    I eventually contacted my ISP which is Orange and to my surprise they were aware of the problem ad said it would be sorted soon.
    6 hrs later I was able to open iTunes.

  • Access to Time Capsule in Bridge Mode from outside of the network

    I have a Time Capsule with an external hard drive set up in bridge mode on my home network. The main router and DHCP server is an Actiontec MI424, and is specific to my ISP (Verizon, required for TV Guide info from Fios) so the Time Capsule's AirPort can't be used as the primary. I need to access the external hard drive from outside my network (I.E. the internet), but I'm having trouble figuring out which ports are required for Sharepoint to work.
    So far I've forwarded 548, but I get an error "-36" when I try to connect from the outside. It works fine on the inside. Any suggestions?
    Thanks, JSD

    The Express units can extend wireless on the TC or each other.. but they cannot extend wireless on the Asus anyway..
    So the setup is Asus--TC (that has to be ethernet) The TC in bridge mode.
    Then TC -- express can be done by ethernet in roaming mode as bob listed above or extend wireless.
    I am guessing.. what model are the express units.. they are older Gen1 N model ??
    IMHO the TC is simply no longer viable.. replace it with one express as the AP and extend it with the other Express.. see if that works better.
    But I would be trying to use the wireless just from the AC66U.
    I would also force the Asus back to 20mhz on the 2.4ghz band.. so you can provide adequate channel separation.. 40mhz wireless on 2.4ghz works poorly anyway because you have too much wifi .. there is very limited number of non-overlapping channels.. ie 3. 11, 6 and 1.

  • Connection lost from inside VLANs

    Hi everyone.
    The SA520 loss connection to inside VLANS placed behind a layer 3 switch in a daily basis. As a result the PCs can´t connect to Internet. If I try to ping the LAN IP of the SA from de switch it doesn´t respond. I get rid of the problem pinging from the SA520 to the gateway toward the inside (the layer 3 switch IP) as if the SA had lost the capacity to forward traffic to the inside networks. Rebooting the appliance works also.
    Curiosly I have another completely flat VLAN connected to the SA in a dedicated different LAN port which never face the problem, so I suspect the SA becomes unable to route more than one hop internal VLANs.
    My customer SA520 has 2.1.51 firmware. It's setup with ISP redundancy in rollover.
    Any help will be appreciated and possibly save my neck.
    Thanks,
    Dario Agudelo

    Hi Dario,
    As per the details mentioned we are unable to conclude the issue.
    We would like to request the following:
    1. Dbglogs from SA520
    2. Network Topology (So that we can findout whether any route is required or not to forward the traffic).
    3. Layer 3 switch information and configuration details (if the switch is manageable).
    To get dbglogs, login to SA520 web UI and in the URL type  https://IP_address_of_SA500/scgi-bin/dbglog.cgi
    Please note that the dbglogs logs will contain passwords, so please change or remove them. If you are not comfortable posting it on the community forum, please send it through the private message.
    Thanks,
    Nitin

  • Report builder connect to datasource outside of the network

    Hi,
    Locally, we installed report server on Machine (A) and the sql Server on Machine (B).
    My machine is also in the same network and via Report builder i can connect to report server and create shared dataset.
    but outside of network, when i use report builder i can connect to report server but i cannot create shared dataset : there is window appears titled "Enter data source credentials" demanding to enter login/password.
    I entered the same login/password defined in datasource created in report server but i obtained this message:
    "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
    (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
    how i can resolve it ?

    Disabling the windows firewall doesn't mean that there isn't a network firewall.  Try using a port scanning utility from outside your network to see if the port is being filtered (behind a firewall), listening, or being blocked.
    http://www.microsoft.com/en-us/download/details.aspx?id=24009
    You'll need to scan the port have configured for your report server URL, found through reporting server configuration manager in the advanced settings. Typically this is going to be port 80 or 443, but it could have been adjusted to something else, like
    8080.

Maybe you are looking for