Connecting AT200 to TV

Basically I bought a mini HDMI to normal sized for my celcus TV, I'm wondering if I have to do anything special asit won't show on my TV screen, if anyone could help I'd be extremely grateful, even to point me in the right direction if the lead I have if wrong.
I can't find anything about connecting to a TV but my daughter really wanted to watch her Netflix shows on the bigger screen.

Hey,
Have you tried to connect your AT200 to a different TV or computer screen? Just to rule out the TV as the problem.

Similar Messages

AT200 Connection to Windows 7

Hi,
I recently bought AT200 from Germany. It works well except that I don't know how to connect it to PC for file exchanging. I used Acer tablet before and it worked in a wink.
I tried to install all drivers, the MTP USB shows that it fails. My OS is windows 7 (x64).
When I used Acer, a message used to appear to notify me if I want to use it as a mass storage device. Is it because I don't have an SD card? doubting that this is the reason.
I have a MicroUSB to USB cable since the charging cable doesn't work (used to work on ACER too).
All help is appreciated.

Hi
Usually you can use an micro USB port on the tablet to connect your tablet to the computer.
Plug the Micro USB connector of your USB cable to the micro USB port on this tablet.
Plug the other end of the USB cable into the USB port of the computer and the tablet should be recognized as removable MTP (media transfer protocol) device any you should access its content.
As far as I know the tablet support the micro USB port supporting the OTG technology.
So recommend using an *certified USB OTG* (on the go) cable.
http://en.wikipedia.org/wiki/USB_On-The-Go

AT200 : Wifi/Internet speed connection issue after 4.0.3 upgrade

Hi,
Since I have updated my AT200 to 4.0.3, my internet connection speed is incredibly slow.
I have tested on 2 different wifi points where connection with other devices/PC's is great.
AT200 connects easily but the transfer rate is so low that Speedtest.net says it cannot connect to network.
Pages load slowly or not, Google Play gives me a "Connection expired" message.
I would appreciate any help so I can solve this issue. Should I downgrade to HC and if so, does someone knows the procedure.
Thanks

Hi
An similar issue was mentioned in this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=67469
It looks like the app called Wifi Fixer should help you to sort out this issue.
An feedback would be appreciated.

AT300SE - Connect to TV using MHL micro usb to hdmi adapt

Hi,
I recently received the Toshiba Tablet AT300SE. This newer tablet no longer has the HMDI connection port. However it has the micro USB. My question is, can I use this micro USB to connect to my TV using the micro a USB to HDMI adapter?
Has anyone ever done this and made it work?
Thanks,
Nick

Here an interesting info from Toshiba:
+Do the AT100, AT200, AT270, AT300 and AT300SE tablets support Mobile High-Definition Link (MHL)?+
http://aps2.toshiba-tro.de/kb0/FAQ3103FV0000R01.htm
The AT100, AT200, AT270, AT300 and AT300SE tablets *do not* support Mobile High-Definition Link (MHL).

Excite 10LE AT200 - Does proprietary connector allow for file transfers or just charging?

I just purchased an Excite 10LE AT200 and my question concerns connecting it to my Win 7 PC.
I'm able to connect the Excite to my PC via the microUSB connector and transfer files (i.e., the PC recognizes that AT200 as a device). However, when I connect the Excite using the honking big proprietary USB cable that comes with the AT200, the PC doesn't recognize the Excite at all. I see that its charging but I would expect that the proprietary connector would also allow the PC to see the 10LE. Could it be that that the proprietary connector is just used for charging? I'm concerned that if my microUSB port breaks I'll have no way of transferring files to the 10LE.
Any help would be greatly appreciated.

Hi. Not sure if you are aware of a great app called AirDroid? If not, get it! Wireless transfer between your desktop and tablet. You won't do the wire thing anymore. Amazing app and simple to use...
https://play.google.com/store/apps/details?id=com.sand.airdroid&feature=nav_result#?t=W251bGwsMSwyLD...
patrick -

AT200-101 USB OTG strange behaviour with all devices

Hey,
I've got an AT200-101 with an updated ICS 4.0 OS and I can't get the USB-hostmode to work. After a lot of reading about the fine difference between the regualar (type B) USB connector and type A (known as OTG) I finally have got the right adapter (it has a recangular shape and the ID-pin is grounded).
Now each time I plug in a device (usb massstorage device, 3G modem) nothing happens except the AT200 suddenly shows *charging* even though it's not connected to the charger nor is the connected device externaly powered.
I tried these external USB devices with an other ICS tablet (Zenithink) and they work fine.
Andybody any clues?

If you have an active USB-Hub (with an own power supply) at hand, you can try to put that in between the device and the AT200 + USB-OTG Adapter.
The AT200 seems to allow just a very low consumption of bus power.

Re: GPS connection problem AT100

I have a Tablet AT100-100 , which i just bought. I seem to have trouble connecting with through GPS. I have activated GPS as per the manual instructions but still cannot connect with GPS. I have tried to connect on google maps and could connect via wifi but when i deactivate wifi , i cannot connect through GPS only. Is there anything i can do to activate the GPS or is it a hardware problem?

Hi toshibakias,
personally I own a AT200 so I may not be a perfect fit for your question.
I am wondering if you confuse GPRS (General Packet Radio Service) with GPS (Global Positioning System) here. GPRS can be used (roughly like WiFi) on some devices to get a connection for transferring data. GPRS is not a feature of the AT100 (or AT200) but of many phones.
But if you mean a GPS "fix" with the term "connection", then I hope you get it to work with the following steps.
#1
I recommend installing the App "GPS Status" for best transparency. In that app you can see if GPS is basically enabled and a count how many satellites are currently in view (+ reception quality). Additionally you have the possibility to trigger a download of AGPS Data (if a WiFi/Internet connection is in reach) which may speed up the first fix.
#2
Get outside.
GPS (mostly) works only under clear sky. Avoid High Buildings which can shield the reception of GPS Satellites. The number of satellites in view in the App "GPS Status" should increase now.
#3
Be patient.
Getting the position (=fix) can take several minutes. Especially if the GPS receiver is used for the first time ever or the position has substantially changed since the last use a first fix can take up to 20-30 minutes. Usually it should take around 5 minutes if the GPS reception is good and you maintain a roughly steady position.
If you got the GPS "fix" once, future GPS fixes might be faster. Also the GPS position might (!) be still available when entering a building (close to windows at least).

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

Connecting Audiovox TV (FPE3205) using Apple Mini-DVI to Video Adapter

I can't figure out what I'm missing here. All the connections look right, but... well, it's possible that I just don't know what I'm supposed to do now. I restarted both devices, but still, nothing. Any ideas?

You've posted in the iMac G3 CRT area. Are you asking this question about an iMac?
David

How to connect my PB to TV using Mini-DVI to Video Adapter

I went through the posts, so I'm sure this is a stupid question, but:
I have a mini-dvi to video adapter for my powerbook, which I want to connect to my TV. What's the extra cable I need to connect the adapter to the TV?

"I'm hoping that simply connecting the two via a firewire cable will create some sort of mini-network?... but that sounds to easy..."
But it is that easy. Network the iBook and PowerBook via IP over FireWire:
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1845.html
PowerBook G4 (15 FW800); 17 iMac G5; Mac mini 1.42 Mac OS X (10.4.3)

USB Device for IPOD not recognized by Windows, whether ipod connected or no

During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
Any suggestions?

I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
This is driving me up the wall. Is there a glitch with iTunes 7?
Can anyone help me out?? Thanks
Windows XP

Ipod touch can no longer connect to XP following Apple upgrade, HELP !

This is a nightmare. My son has an ipod touch (8gb)purchased a couple of months, and it's been fine until a couple of days ago. I downloaded some music for him, and just about to synch when Apple informed me on itunes of a software upgrade, so naturally I did this. However, it could not complete it saying there was a problem installing the hardware. The ipod then had a permanent picture of a usb cable pointing towards the itunes logo. Itunes no longer recognises this ipod or my own ipod as a device.
I'm not a techhie expert, but I generally know my way around computers, however I could not resolve this.
I called the Apple technical support desk, where I spent 1 hour 45 minutes with 2 different advisors who could not resolve this. We installed and re-installed various components from drivers to itunes to anti virus software, however nothing could change. There was simply no recognition of the ipod at all when connected.It does give a pop up message to restore the ipod, however you can't actually click on the restore button because to have to get rid of the pop up message first, then the screen with the restore facility disappears.
Windows xp is continually popping up a message saying " FOUND NEW HARDWARE WIZARD There was a problem installing this hardware. Apple Mobile USB driver. An error occured during the installation of the device. The system cannot find the file specified."
You then have to click on finish, however the message keeps coming back. We kept going round and round in circles with the technical support people, where it was left that I should start removing programmes on my computer to see if any of those are causing a problem. I have had the same spyware for the last 12 months now and never had a problem before, nor any other programmes.
I booked a genius appointment at my local Apple store today where the assistant reset the ipod to factory settings so it could at least work. I explained the situation, however 15 minutes was never going to be long enough to look into it, and a restore was all they did. Obviously all of my programmes were lost, however when I got home and plugged it back into the computer again, it could not be recognised by itunes and i got the same pop up message. Luckily we have not spent alot on downloads, however my son has lost his music now and it cannot be connected or upgraded. It's under guarantee however a software upgrade by Apple has totally messed my computer up. I really don't know who to turn to now as both the service support and store has not rectified this, something I feel has been caused by Apple.
Any advice is appreciated. Thanks

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Error while creating a new connection in ODSM for OVD

Hi all,
I am getting the following error while creating a new connection in ODSM for OVD.
Error log:
[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:277)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by:
=======
java.lang.NoClassDefFoundError: Could not initialize class
com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub
at com.octetstring.vde.admin.services.client.ServerMgrServiceLocator.getVDEAdminService(ServerMgrServiceLocator.java:58)
at oracle.ldap.odsm.model.ovd.APServerProxy.connect(APServerProxy.java:248)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticateAs(APServerProxy.java:684)
at oracle.ldap.odsm.model.ovd.APServerProxy.authenticate(APServerProxy.java:286)
at oracle.ldap.odsm.model.ovd.APServerProxy.init(APServerProxy.java:216)
at oracle.ldap.odsm.model.ovd.APServerProxy.<init>(APServerProxy.java:198)
at oracle.ldap.odsm.model.ovd.OVDRoot.connectOVD(OVDRoot.java:185)
at oracle.ldap.odsm.ui.common.Connection.connect(Connection.java:120)
at oracle.ldap.odsm.ui.common.Visit.createConnection(Visit.java:663)
at oracle.ldap.odsm.ui.common.Login.saveChanges(Login.java:215)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(Unknown Source)
at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.broadcastEvents(LifecycleImpl.java:812)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:292)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
... 28 more
How to resolve this issue.Pls suggest me.
Regards,
-Deena.

Hi Deena,
This error:
"[2012-07-10T14:50:30.005+05:30] [wls_ods1] [ERROR] [] [oracle.adfinternal.view.faces.config.rich.RegistrationConfigurator] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 0000JXkC9dU3FClqwsJb6G1FyhO000003D,0] [APP: odsm#11.1.1.2.0] Server Exception during PPR, #7[[
javax.servlet.ServletException: Could not initialize class com.octetstring.vde.admin.services.client.VDEAdminServiceSoapBindingStub"
is known issue
Go to metalink, article: Unable To Connect To OVD 11g Webinterface Using ODSM. [ID 1282757.1]
You need to apply that patch.
I hope this helps,
Thiago Leoncio.

Adobe cloud has lost connection with the server

Adobe cloud has lost connection with the server, can't get adobe cloud to work so I can re-install photoshop to fix a corrupted DLL file.

*Adding new items/removing orphans*
Try iTunes Folder Watch or iTunes Library Updater. Folder Watch is much faster on the adding files front, can be set to run in the background and includes a useful exclusion feature, however it’s slow at removing orphans. iTLU is better for this although doing it manually after looking at a list of proposed removals generated by Folder Watch is probably faster still. iTLU can also be set to update iTunes when you've used 3rd party tools to change tag info.
You may need to amend the list of file types these programs look for. My list includes:
.mp3 .mp4 .m4a .m4b .m4p .m4v .mov .wav .aif .mid .ipa .ipg .ite .itlp .m4r .pdf
Note the last 6 types may not be recognised as already being in the library so should either be omitted from the search or you can add (at least for Folder Watch) individual exclusions for files you know are already in your library.
tt2

Connecting AT200 to TV

Similar Messages

Maybe you are looking for