Connecting Audigy 2ZS to Front Pa
I have audigy2zs and just bought a front panel for it. however it didnt come with any cable so im wondering what kind of cable i need. i was thinking ide cable but it doesnt seem right. i appreciate all the replies.
Spetznaz24,
If this was a new retail purchase, then I would recommend contacting Customer Service to have the proper cable sent to you. If not, then the cable is basically just a non-keyed IDE cable.
Daniel
Similar Messages
-
Want to connect Audigy 2zs gamer with digital so
Ok I have the audigy 2zs gamer, and the gigaworks 750 7. surround sound.
I also have hdtv cable box with digital out, and optical digital out.
I have ps3 (obviously with blu-ray) and xbox 360, both of which have a optical digital out.
I want to be able to connect to these, but I guess the only inputs ( on pod, and on card) are analog only.
My question is. Is there any way to do this. I see a digital i/o box, but I don't think it's compatible. It says it is with the value model, but not the regular 2zs gamer one?
So do I have to buy a newer sound card, or can I use this one as is, or with the digital i/o box to make it work.
I don't care about having multiple connections, I can make do with having only connected at a time.
Thank YouI guess what can solve one of the problems is.
If I use a digital out (4 pin minipole connecter) from my cable box to the line in of the 2zs board, will it accept it...or is the line in for the 2zs analog only? -
Connecting Soundblaster Audigy 2zs to Home Theater Amplif
Can I connect my Soundblaster Audigy 2zs directly to an amplifier and still get 5.,6.,or7. speaker setup? I feel it's kind of redundant to use a reciever when the Audigy has all the capabilities of a Home Theater Reciever. And it outputs sound at 92khz, which currently is only available on more expensi've recievers.
My goal is to use my pc as a souce and connect it directly to amps and speakers. I would like to put money I save on recievers into a high end speaker system
I have read in the previous posts that it may be possible to do 5. by getting an mini jack to RCA adapter for each channel. But no details on 6. or 7..I am in the same situation as you. As the CL told me
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=5343 --
You can either use the audigy to decode the sound or your reciever to decode the sound with the SPDIF passthrough. Just whichever has the better specs.
From my situation I would recommend having speakers with analog hookups to the front/rear/center sub rather then the digital output. The only way to take advantage of the digital output is with a DVD and in that case you can just watch a DVD on your TV rather then your computer. For games the analog 5. hooks is better as well because with games it decodes it and with your reciever it would only have 2. sound. -
Connecting vcr to external SB Audigy 2zs Platinum Pro
I've just joined, so apologies if I "mess up". I have some precious things on vhs tape, and want to transfer them to cd/dvd. I run Windows XP. I have to use rca connections, don't think there's another option on the vcr. I see the red and white rca connections on the back of the external 2zs, but where does the yellow (video) connection go? Would be very grateful for help. TIA.
Sybil
Message Edited by Drummond on 04--2009 05:32 [email protected]Re: connecting vcr to external SB Audigy 2zs Platinum Pro~ Hi Katman - many thanks for the reply. There is no video connection on the SBA2zs that I can find either. I did send mail to Creative, but they haven't had the courtesy to respond. If I use the 2zs for the audio connection, can I then attach the video connection from the vcr to a separate video capture card? Will this bring everything together and in synch? Sorry, I'm still very much on L plates with all this. Once I get things on to the computer, I can then edit out what I don't want, and burn the rest to cd/dvd; or that's what I'm hoping!! It's getting the data from the vcr tape that's the stumbling block. I know there are?expensi've machines that you can put the vhs tape in and it will copy direct to dvd, my friend has one, but she doesn't know whether you can pause the recording (disk) and let the tape continue running till she gets to the next bit she wants to copy, then start the disk again. TIA of further help.
Sybil
Message Edited by Drummond on 04-3-2009 04:05 AM -
Just would like a confirmation on this...
If you connect the Audigy 2ZS digital out to a standard stereo reciever (sony) digital coax in it will not damage the reciever?
Sounds silly but I know the digital out is meant for connection to propietary creative lab speakers, and I have read that connecting it to other devices can damage them.
Also I should use a regular small "headphone" jack to connect to the digital out on the audigy 2ZS? This should be a mono cable also?
Please help.. thanks!!!
If you can link to the cable/adaptor I would need that would be great!Message Edited by asharabi98 on 05-29-2006 :23 AMAny stereo cable with jack on one end and RCA conenctors at the other is fine. It will not damage the receiver. Something like this (use one of the RCA only - I think is the white one for front speakers):
<IMG src="http://us.st.yimg.com/us.st.yimg.com/I/trianglecables-site_900_56428">
Read the FAQ about digital connection and be prepared to have only stereo sound in games because Creative soundcards cannot send surround sound from games over digital connection.
Message Edited by SoNic2367 on <SPAN class=date_text>05-29-2006 <SPAN class=time_text>04:33 PM
Message Edited by SoNic2367 on 05-29-2006 04:34 PM -
Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5
what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
I have copied the advice I received/didnt recieve from creative.
Best of luck
Dear Martin
Thanks for your reply
I am sorry for the problem you are facing.
To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe:
Original Message Follows:
Hi
I understand you must be busy, so no problem.
No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
Half life two: front left-right and centre. NO rears
Fear: Front, left, right, & centre. No rears
Farcry Front left, right & centre. No Rears
When I run your speaker test HISSSSS, No Rears, no front left or right
Beats me?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 24 January 2006 5:44
To: Martin
Dear Martin
I apologize for the delay on the answer.
If you select Dolby Prologic mode on the decoder, are you able to listen
the game audio, with EAX, in all of the speakers?
Regarding to the optional bay dri've, you can purchase it from ou
Best Regards
(Mod Note: Name Removed)
Original Message Follows:
Hello
Your email was helpful, unfortunately, not for my unit, you see I would
have
connected the Jack leads in by now if the inspire had Jack lead inputs
as
you describe
Please don't think I am being sarcastic, but from reading the
correspondence
below it would seem as if your department is having difficulty
understanding
my problem.
Also it would seem your department doesn't have the necessary technical
information on your very own product, so to help with your dilemma I
have
taken photos of the input/outputs on the Inspire unit.
You will clearly see the inspire has no inputs other than Coaxial and
Optic.
This leaves me back to my last post. I think the solution would be for
me to
purchase the correct processor, which would have come with the original
sound card had I not been a little tight on the money front.
I have attached a photo of the sound card with the processor, I would
love
to buy this processor but find myself unable to locate this product on
your
web site. Would you possibly be able to send me the correct link to this
item so I can buy this Processor Please?
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 8 January 2006 0:3
To: Martin
Subject: RE: CLE -
Dear Martin
Thanks for your reply
Your soundcard is Audigy 2 ZS
Your speaker is Creative Inspire 5. Digital 5500
You will need to have a 3:3 cable(with the color green, black, orange)
to connect your soundcard to your speaker, to achieve the 5. effects
with games.
Below is the connection:
- Connect line out jack of Audigy 2 ZS
to 'Front' of Creative Inspire 5. Digital 5500 using the green color
connection
- Connect line out 2 jack of Audigy 2 ZS
to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
connection
- Connect line out 3 jack of Audigy 2 ZS
to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
orange color connection
Once you have done the correct connection, play the game DOOM3.
Ensure you have selected either the EAX or surround option in the game
settings.
Does it work?
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
You have lost me. Your sound card clearly states that I can have EAX
surround decoding from the sound card I have purchased.
All of the games on your web site claim to give me an environmental
effect
that will blow my mind, hence EAX.
All I have done wrong is NOT buying your decoder that comes with the
sound
card. My mistake.
All I want to do is re-address this issue and buy the correct
decoder/processor.
Can you point me to the correct link on your web site so I can buy the
correct decoder/processor?
As for the PCM out of the above cables, this foxes me as my other
equipment
only use Optical cabling on my Lexicon processor and from that I have DD
7., DTS 7. and meridian 5. lossless.
My issue is more to do with NO EAX from the rear and centre channels
while
in-game.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 09:3
To: Martin
Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
Dear Martin
Thanks for your reply
All commercial digital connection eg. optical or coaxial cable will only
carry PCM stereo signal. If you want to output the signal to a surround
5. with extra EAX environment effects, it will not be possible at all
since it is only restricted to stereo channel signal.
As per current industry limitations, we are bound to follow the standard
one-signal output for all our SPDIF and Optical output jacks. This is
something that is currently shared by all vendors for all products.
Please note that all games are not dolby digital, even they are , it
will require certain motherboard to encode it to dolby digital signal,
which our soundcard does not support.
You can only use analog connections to gain true 5. surround for
gaming..
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Creative Labs Europe
Original Message Follows:
Hi Joong
I don't fully understand your email, but I do get the gist of what
you're
saying and understand I need to connect the analogue cable to fully
appreciate the sound in EAX.
Would you be able to tell me what product I could buy from your
catalogue
which would marry up with the sound card I have, as I understand now
that
the Inspire 5. will not do the job.
Kind regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 6 January 2006 04:00
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
Dear Martin
Thank you for the reply.
Computer games written with support for 3D audio do not require a Dolby
Digital Interacti've Content Encoder (DICE) to output multichannel sound,
with no exceptions. Sound devices that support the real time encoder
technology from Dolby will simply receive the multichannel wave file
output and encode it in real time to a somewhat modified Dolby Digital
bitstream. Creative does not support the Dolby Digital Interacti've
Content Encoder on any of its sound cards.
The only difference between a Sound Blaster card and an audio card that
has a real time encoder, is that you can make a one-wire, digital
connection from your audio card to your home theater receiver and enjoy
discrete multichannel sound from the game. However there will be a
continuous, slight delay, known as "latency", as the encoder is creating
and transmitting the bitstream, and of course the compression scheme
being used is "lossy" (i.e. not bit-accurate).
If you want to enjoy 3D audio in 3D enabled PC games in multichannel
surround sound with a Sound Blaster card, it is recommended that you
connect the analog outputs of the sound card directly to the analog
inputs of the receiver. This will require 3 cables for 5. surround
sound, one for front right and left, one for rear left and right, and
another one for front center and subwoofer. Though it requires more
cables than a real time encoder system, it will not have any latency
issues. When connecting PC audio to a home theater receiver, Creative's
latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
are likely to provide higher quality audio than any Dolby Digital real
time encode system available for the PC today.
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Services
Please do not use this link to submit technical queries
Original Message Follows:
Hi
One particular game which has "in-game" DD is Farcry; I used this as my
benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
it
on friend's machines and they get the full surround effect so I Know
this
version is ok. I also have ALL of the game patches & updates.
I would like to point out that while playing Doom 3, Half Life 2,Fear,
Colin
McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
ops, All these games have EAX HD, which is enabled within the options
menu
"in-game", But I do not get ANY use out of the rear's and I might as
well
listen in stereo.
No, inspire 5500 does not automatically switch while "in-game" when DD
is present as you would expect, but does if it was a Movie, which makes
me
think the DD stream isn't getting to the processor.
I originally thought I could put all this to rest if I could buy the
control
panel that would have come with the Sound card if I had not tried to
save
money, but every time I search your accessories site I get completely
lost,
it really isn't user friendly, the sub-menus are very time consuming and
point you in the wrong direction because they are not categorised as Joe
public would understand
I downloaded your TEST Movies and creative demo player utility, ran it
but
still no EAX HD or DD if that were present.
I want to put this card and Processor into my boys computer (which is
the
same Spec as mine and I will update to the FX series, but I am unwilling
if
I cannot find a logical reason why this set-up cannot work first.
Would it have anything to do with the pins on the Digital out on the
sound
card plug, the one I bought and was attached to the last email? Only
sending
certain channels down to the processor?
Regards
Martin
-----Original Message-----
From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
Sent: 5 January 2006 08:09
To: Martin
Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
Dear Martin
Thanks for your reply
Your speakers are fine as you mentioned that there is sound from all the
speakers when you are playing movie.
May i know what game are you playing when there are no sound from the
rear speakers?
Have you done the appropriate settings in the game to achieve the 5.
sound?
Is there any game patches that you will need to update?
Does the Dolby Digital LED light up when you are playing the game?
Please retain all the previous correspondence when replying to this
email.
Best Regards
(Mod Note: Name Removed)
Creative Customer Support Servic
Original Message Follows:
Hi
I am sorry; I should have said the Inspire 5. was model number digital
5500
S/N SW330030026.
The inspire has these connection on the back of the processor
>From top/back of unit
Audio Outputs
Front
Rear
Centre/subwoofer
Audio inputs
Audio line in
Coaxial
Optical
DIN
The Din to a remotely located Subwoofer which has the speaker leads
inputting into it. Plus power.
Attached is the creative view of the controls menu and I have attached
the
invoice I was sent, it shows the lead I was told to fit.
As I said, I can now hear DD5. while within a movie from ALL speakers
BUT
no sound from rears during IN GAME DD5.
I do not use this PC for films only games.
Regards
Martin
If you are having a digital connection, it is normal for only get only
front left/right is you use the speaker test option.
http://us.creative.com/support/kb/article.asp?l=3&sid=4858
Speaker test only outputs from two front speakers?
You mentioned that that you are unable to get any sound from the rear
speakers when playing game right? May i know are you using a digital
connection? May i know what speaker settings have been made under
Creative Speaker settings?
Do get back to me on the above.
Thanks
Original Message Follows:
Operating System: Windows XP Professional x64 Edition
Creative Model Number: SBO 350
Computer Brand/Model: home made
Processor/CPU: AMD 64
Memory: Gig DDR 4
BIOS Type/Revision: 5. 39
System Board/Chipset: ASUS A8N-SLI Deluxe
Detailed Problem Description:
I have the above Sound card.
I also own Inspire 5. amp/processor
I Wanted to save money by connecting above sound
card to amp/processor
Connections on sound card made life very difficult
I contacted Creative for help. you told me to buy
an RCA to mini jack cord which also has other connections, from your
web site, (I tried to find
the product number for you, but your sub-menu
system is so poor I couldn't locate the RCA/mini
3.5 /to phono link for you) this cord connects
directly into the digital in, on the sound card (3.5 Mini jack) to the
coaxial input on the
inspire 5. amp/processor.
I have enabled ALL sp-diff settings and digital in
setting on every program/utility/kitchen sink and all.
I have an SP-Diff wire from DVD burner to creative
sound card, and yes its enabled and digital only
is selected.
I can play a DVD and see the inspire 5.
automatically change from Pro-logic to Dolby
digital when it See's an AC-3 stream.
when I try and play ANY game you say has EAX
,2,3,4 I cannot get any sound from my rear
speakers (see above in Dolby Digital ALL speakers
work correctly)
when I enter the set-up menu within the creative
software you supply with the sound card and select
5. speaker, digital only, test the speakers via
the white noise function, all i hear is left and
right noise. no centre, no rears.
I phoned you tech support line, the boy on the
phone didn't have much of a clue about your
product and I had to tell him what connections sit
on the inspire 5. series amp/processor.
I want to build another PC for my son, I want to
add the FX series sound card and amp, but i am not
willing to buy anything until i feel you have
helped me to solve this problem first.
please can you help, I am at the end of my tether
with this sound card.
kind regards
Martin Waite
Message Edited by Daniel-CL on 0-28-2006 :36 PM -
I use my Audigy 2zs with a Zalman ZMRSA 5. Headphone amplifier and ZM-RS6F 6. Headphones. Up until this morning the setup has worked flawlessly. However, upon powering up my PC I found that I was hearing sound in only one ear..... now either I am going deaf, or more likely there is a problem. Have checked leads, windows settings etc, nothing has changed. At the moment I am trying to eliminate my soundcard from the list of possible faults..... however.....
I currently have my PC Rigged up to my hi-fi (2 speakers)and note that when I connect to line-out, I only get sound from one of my speakers, whereas outs two and three give me stereo output. I have tested all cables and wiring, and have gone as far as to reseat the card in my PC. I dont understanbd why it worked fine last night, but now I lose stereo output from out- (supposedly connecting to front/rear, as per Zalman and/or Creative install instructions for 5. speakers.)
System is Windows XP Service pack 2.
Anybody got any ideas or is my card/the connector on it goosed?
Cheers
Andrew<IMG src="http://img73.imageshack.us/img73/8080/audioproblem7uo.jpg">Sorry to be such a nag but I want to make 00% sure its not my card thats screwd and just a software/driver problem. This image is what happens after trying to install this driver either from cd or from the latest drivers. It just wont copy one file into the system32 folder.
-
Is Creative Audigy 2ZS Platinum Sound Cardcompatible with Yamaha Keyboards? (XG sound
Hi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
VijjeeHi,
I have an Yamaha PSR -550 keyboard that can generate Yamaha XG sound forms in addition to General Midi. Now I want to buy a sound card that is 00% compatible with this key board so that I can connect it to computer.
Are Creative Audigy 2ZS Platinum/ Platinum pro sound cards compatible with Yamaha keyboards (especially when it comes to reproducing XG sounds)?
Thanks for your time
Vijjee -
SB Audigy 2ZS Plarinum Pro: setting source for recording
Hello!
I am having problems setting the source for recording. I want to set the recording source from 'Wave' (default) to 'Line-In /Mic'. After doing so with the mixer or the MediaSource Player it resets to 'Wave' after some time. Why? Can I force the software to make 'Line-In /Mic' the default setting? It really dri'ves me nuts to see that the source has changed without me being notified. I want to have the source changed only by myself and not by some cozmic radiation, God's will, voodoo magic and whatnot.
Greetings
ClustalW<Re: SB Audigy 2ZS Plarinum Pro: setting source for recording? Okay ClustalW, I understand the "Default" problem you are having. So can you go to control panel, and sound and there look at your recording devices and tell me what do you see? If your desired device is there, you can choose it as the default and then throughout the rest of windows, this will be THE global default recording device or the first choice, when you are in other programs to record from. Also, make sure your device is plugged in when making this change. On my system with that board, a few years ago, I could make the choice, but it would always pick something else when the source was unplugged. For example, if I were using the front bay inputs as recording, when I would unplug them and reboot, my system picked the next thing as default.
Next go into to your Creative Control panel and do the same thing there. Theoretically your choices should be linked, but this is not always the result. I can choose mine in Vista and windows 7, but lastly I always go to the Creative mixer applet and do it there and that works best. For me, my default is my front panel Mic or Microphone FP but as soon as I unplug it, it wants to make my back mic jack the default. -
I am trying to get information on connecting S/PDIF digital IN's and OUT's to an Audigy 2ZS card.
I have been reading quite a bit about this, but I see either incomplete information or none at all. What I've read has left me quite confused.
For instance, I read something about a 4 pole mini jack, as well as a 5 pole mini jack for the DIGITAL OUT connector. I also read somewhere that certain /8" to RCA "breakout" cables will NOT work for the digital I/O's because the ground(s) are in a different location.
Can someone provide COMPLETE pinout information for the connectors on this board, or, at the very least, ANY/ALL S/PDIF-relatd connectors?
I have made custom cables before, so if I just had the pinout(s), I'm sure I could come up with something.
Thanks.Gerben wrote:
Thanks for your quick answer. In fact you confirmed my findings so far...
Hence I did find a last straw halm, Why not change all data to AC3 format and allways have 5. digital output? ... I found a AC3 filter programm but not yet the programm to do the translation. Your advice is much appreciated. If it cannot be done please also advice... Thanks very much for your effort.
There are soundcards from other manufaturers that encode the multichannel wave into AC3 form, the feature is called Dolby Digital Li've. There have been many posts complaining about the fact that this feature doesn't appear on the new X-Fi, considering the price and that the feature has appeared on much cheaper hardware. There are several problems with Dolby Digital Li've. First of all, it is not the same as the regular Dolby Digital. DD and DD Li've are lossey compression formats, DD is bad enough, but owing to the fact that DD Li've is a "real time" compression format, the quality is much worse. Another problem is latency. There may be a considerable delay between the action on screen and the sound you hear, a serious problem for games. Creative make a DTS encoder, which is supposed to be considerably better than DD Li've, but I don't think it's available in Europe yet. I don't think you'll find any software encoders.
Is there any reason why you want to use a digital connection? -
I have just purchased and installed a Hyundai BlueH HM9W 9in Wide MFM LCD-TV. Although it is primarily a PC Monitor,it also has a built in TV tuner and speakers. The sound quality is very poor.
My PC has a Nvidia Geoforce 6200 Graphics Card and an Audigy 2zs sound card connected to a Cambridge 4: speaker system with a remote volume control. I am having a difficulty in trying to find out how I can connect the audigy and speakers to the new monitor.
I can play music etc from the PC through the main speakers with no problems, but I cannot route the TV audio through my speakers. If I disconnect the sound card and speakers, I cannot play any sound through the monitor speakers.
On the back of the monitor there is an audio input for VGA and DVI (support HDCP or PC)
My Audigy card has jack connectors on No.s 3&4 as shown on the diagram in the Audigy Usres Guide which are connected to the speakers and remote volume control..
I have tried to connect from the monitor to connections 5,6 &7 with the PC audio cable supplied with the monitor with no luck.
If any one can tell me what I am doing wrong and perhaps suggest a cure I will be very grateful. If I need to supply further information i will try to do so.
Brian CarverHmm... Audigy is not very good in this but,- set winamp to output through kernel streaming or ASIO output plugin and control the source through Wave port in Audigy Mixer by enabling/disabling the Wave port (ASIO and KS does nor go through this port) ... better would be to use sucha software that lets you route signal through Rear L/R for this connection (Foobar, BeatPort SYNC as for an example)- if you prefer to connect through S/PDIF (coaxial) then you can control audio by switching between Digital and Analog in Audigy Control Panel (use Winamp through S/PDIF and others through analog) ... I suppose you need to mute Wave port and use ASIO / KS in Winamp for this setup too so you don't get PC system sounds etc. mixed into the stream... in both cases, you also need to switch between speaker settings (2/2. vs 4/4.) which change can be automated through scripts (IIRC, scripts are already here forums somewhere)jutapa
Another method is to use onboard sound for PC audio and Audigy for home theater (or vice versa depending on connectivity).Message Edited by jutapa on 02-03-200802:05 PM -
Humm when connecting Audigy 2 ZS to home ster
I'm connecting an Audigy 2 ZS to a home stereo. I'm using a /8 stereo-to-RCA in jack to hook up to the L and R on my home stereo receiver.
While I *am* getting sound, there is a serious humm, and the sound isn't as loud as I would have expected.
The receiver is a Pioneer Elite VSX-45TX, and I've got the SB hooked up to the CD in connection (the dvd/cd player is hooked up elsewhere).
Why am I getting such horrible humm? I don't get this when I use the PC in my office using the Yamaha powered speakers.
- .dave.DaveNH wrote:
I'm connecting an Audigy 2 ZS to a home stereo. I'm using a /8 stereo-to-RCA in jack to hook up to the L and R on my home stereo receiver.
While I *am* getting sound, there is a serious humm, and the sound isn't as loud as I would have expected.
The receiver is a Pioneer Elite VSX-45TX, and I've got the SB hooked up to the CD in connection (the dvd/cd player is hooked up elsewhere).
Why am I getting such horrible humm? I don't get this when I use the PC in my office using the Yamaha powered speakers.
- .dave.
Are you trying to connect Analog (2 way stereo) OutPut signal (from Audigy) to Digital-InPut (CD/DVD input) channel (on Pioneer)? Try to connect those R/L (RCA) to AV Input (stereo).
From VSX-45TX site - Connectivity:
* RS-232
* USB - Rear
* Multi-Channel Input- All
* Multi-Channel Outputs - All
* Digital Input - 5 (2 coaxial, 3 optical w/front)
* Digital Output - 2 optical
* 6 Audio / 5 A/V Inputs (including Tuner) !!! ANALOG INPUTS
* 2 Audio / 2 A/V / Video Output
* Phono Input
* S-Video - 5 In / 2 Out
* Component Video In/Out
* Front A/V Inputs
* Banana Speaker Terminals
* AC Outlet
You can connect Audigy to Pioneer using digital or analog? Digital would be the best choice. RTFM (for both devices) to find out how these connections are done (which output on audigy and input on pioneer should be choosed with analog/digital. Shouldn't be hard reading.)
.jtp -
Frustrated with Audigy 2zs drivers
"Frustrated with Audigy 2zs drivers\ Hi,
I really need some help with drivers for my Aud 2 ZS Plant card as i am very frustrated. A couple of months ago I reformatted my HD and subsequently re-installed all my drivers. When I was ready to install my soundcard drivers\software I could not find my installization disc as I moved to a new place 6 months ago and I guess they got lost in the unpacking. Since then I have tried to find drivers for my card and in the process have?used 3rd party drivers ie. KX, PAX, and daniel_k but could not get them working or they (KX) were hard to understand. Anyway, I am to the point now that I just want to have sound with functioning software where I can get back to doing some hobbyist home recording as I did before with orginal drivers. In saying that, can anyone please point me in the direction to find the most up to date drivers for my card? Iam running WIN XP Pro sp3. I am to the point now that I want to take the card and front dri've bay out of my system, chuck it, and go and buy a $20.00 generic card.
Help would be much appreciated.
TappyIf you want the latest drivers I'd use Dan K's if I were. None of the old software works with the latest drivers so you're kinda stuffed. Dan K's are based on the 2.8.000 drivers which are the second to latest drivers available. Don't use the 2.8.00 drivers - they cause more problems than they solve.
Before installing any more drivers/software it might be an idea to make sure there's nothing left of any previous drivers you've tried to install. Could be what's causing the problems.
This is how I remove my drivers. May seam a little convoluted but in your case it may prove useful to be as thorough as possible.
You'll need Driver Sweeper, and CCleaner, 7Zip and Dan K's Audigy Support Pack 2.0 (if you don't already have them).
Download these and install; Driver Sweeper, CCleaner and 7Zip.
Now you need to extract all the files out of Dan K's support pack, which should be an *.exe file. You need what's inside that *.exe file. After installing 7Zip, you should see a new 7Zip options menu when you right click on files or folders?
Click on it and then select Extract files to Audigy Support Pack... or something similar. Don't just select Extract files.
Inside the new folder that should have appeared after 7Zip extracted everything, you'll see another folder named Drivers.
Copy this folder to your desktop.
Now reboot and start Windows in safe mode.
Click Start then Run and type cmd.exe to open a command prompt, then type (minus quotes):
" takeown /f C:\Windows\*.cdf " and hit enter, then:
" cacls C:\Windows\*.cdf /G *insert your logon name*:F " and select Y and hit enter again.
You can now close down that command prompt window.
Go in to the Drivers folder you copied to your desktop and run Setup.exe and this should appear:
<img border="0" src="http://theliability.googlepages.com/creative_uninstaller.png">
Select the same options as above and click OK and let it do it's thing - when it says reboot your PC click No or Cancel.
Now run Driver Sweeper and do a scan for all Creative drivers then click Clean.
Don't worry if it says things like file doesn't exist or some other error msg. It'll still get a few things.
No load up Add or Remove Programs (personally I prefer Revo Uninstaller) and remove anything related to Creative.
Finally load CCleaner and scan/clean your registery.
Reboot back in to normal Windows.
And that's it. A tedious process I know, but it's the only way I've found of properly stripping CLs drivers out.
You'll know if it's worked because when you now go and install Dan K's pack the installer should just run straight through. When there's still driver remnants the installer always says it's found previous drivers and need to uninstall them and reboot.
tbh I recommend running through this process regardless of wether or not your choose to stick with the old drivers or go with the newer ones.
Creative's drivers are infamous i'm afraid and at least after this your PC should be relati'vely clear or remnants.
Message Edited by Meocene on 07-23-2009 07:08 [email protected] -
Medusa Headphones+Audigy 2zs Strange Outp
I have bought these today SpeedLink Medusa SL-8793 5. ProGamer Edition (SP-026-SL) , everything seems to be fine and good quality, but the only thing is that i have an Audigy 2zs, and the vibration will work only if i plug the subwoofer cable into either where the rear or the front cables should be, but this then causes the speakers to response wrong to the surround sound system, like the rear doesnt sound where the rear should be, howerver if i plug in the subwoofer into the subwoofer and the rest normal, i get perfect surround sound system, please help i would like to have the vibration and the surround sound
I also recieved a reply from medusa help and they said change the output channel in the software, any experts on creative audigy 2zs? clueless how t ochange output channels >,<
falty batch or anyone can shine some light?
thanks in advance
RogerBump
-
Audigy 2Zs No System Sound, No Audio Card So
About a month ago I ugraded to the latest drivers for audigy 2ZS and everything ran smoothly until now. I can't understand all of a suden have no sound at all. Checked everything is connected properly. My os is windows vista. Please help. I tried google to find and answer but not luck.
Well to upgrade to beta driver is never a good thing to do . If you have system restore go back in time to before the new drivers were installed . If that does not work uninstall the new drivers and install the old drivers again .Good Luck :smileyvery-happy:
Maybe you are looking for
-
JAVA Add-in For Central ABAP Instance installation failure
Hi! I'm attempting to install a java add-in to an ABAP central instance in our sandbox for NW04 SR1. After sapinst is started, the process runs for approximately 2 minutes then fails. I've not been successful in determining exactly why. I have env
-
Nokia N97, Phone from hell (CHINA), built for the ...
Well the subject spells it out, No need to address all the issues. My biggest dissappointment besides a $600 phone not functioning after only 5 weeks of use is; I paid premium price for a premium mobile phone. For the price of a N97 I could have boug
-
You'vetried it.. is it worth upgrading form 08 to 09 ?
The main things I felt were very weak in 08: - very limited resolution when exporting - very limited audio functionality (really have to export to GarageBand for any audio support)
-
Different characterlistic of material in Inventory
Hi all Is there a way to distinguish different type characterlistic of a material when GR. IE Good Receipt of product A from production. However out of the 100 piece, 30 of them are packed with english manual, 40 of them are packed with chinese manua
-
17" MacBook Pro lion 10.7.4 showing no display
I've just updated my 2007 17" MacBook Pro to the latest 10.7.4 and it now detects no displays and shows a blank screen. I can log in fine using a remote screen connection and the machine seems to be functioning perfectly (other than having no display