Connecting Audio from DV1000 to TV

Have a DV1000 Pavillion that I want to connect to Toshiba HD LCD TV. Has monitor cable but no HDMI. Connected monitor cable no problem. trying to figure what audio cable I need. TV manual shows a Y PC output to PC audio cable input. Would single male to male stereo audio cable work?
Any suggestions?

The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort. The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports.
The Mini-DVI to HDMI doesn't carry audio. If you connect the MacBook using a Mini-DVI to HDMI adapter you will probably need to use external speakers or a 3.5mm stereo headphone jack to RCA sound plugs connected to a stereo system for audio if your TV doesn't have separate RCA input plugs or a 3.5mm stereo input plug for audio with the HDMI plug.
The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI. Check your TV manual to see if it has audio plugs that work with one of the HDMI ports.
If you have the Late 2008 model 5,1 Aluminum Unibody or Late 2009 model 6,1 White Unibody with the Mini DisplayPort rather than the Mini-DVI there is an adapter that uses the Mini DisplayPort and a USB port to combine video and audio to HDMI. It's only 2 channel stereo not 5.1 Dolby Surround.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

Similar Messages

Removing easy connect audio from output sources

I'm not sure where it came from, but I have an option for "easy connect audio" in my sound output settings. For some reason, the computer continuously reverts to this, and even though I've deleted the audio pref. files, it won't seem to go away. Any ideas on how to remove this pesky, non-exsistant speaker?

You probably got easy connect audio from easy connect, a remote desktop application.
The problem is that it's a kernel extension, so you won't just be able to delete it, at least i couldn't locate it.
If you want to delete it, do the following.
1) get the easy connect install package(search for the easy connect application)
2) begin the install process, until the part where you have accepted the license agreement
3) choose custom install
4) uncheck easy connect
5) choose a different location for AnteceaAudioDriver, i recommend an empty folder on the desktop.
6) under the custom install window, the action should now say upgrade under the "Action" header, hit install
7) On your desktop in the folder you specified for install, you will now find a file called AnteceaAudioDrv.kxt or something similar, DELETE it and your troubles are over!

How to connect audio from ASUS TV FM Card to SB Audigy 4 Ca

I haven't installed the ASUS TV FM Card?yet but I see in the manual that it has an onboard connector for audio which can either go to the motherboard or a sound card (2 plugs on leads, one small, white and the other larger and black). In my case it would have to be the sound card as my onboard audio is disabled. I've been trying to find a detailed spec diagram of my audio card so that I can get the installation details into my brain before messing around inside my PC case. Is there a "Line-in JP Audio-input" on this card?Or do I have to connect the ASUS card to the motherboard - question there is will the sound work?Do I need to connect the audio at all with a PCI slotThis is all above my head and I would appreciate any help.Anyone any hints on this please?Message Edited by Ex-Brit on 0-27-200609:00 AM

The Best solution is to connect the sound directly to the sound card (eventually it gets there anyway ... even if you connect it to the cards audio input)
depending on what type of connector you have on the TV (SCART/RCA) you`ll need some adapters.
the one you`ll most probably need is an RCA Audio -> 3.5 Stereo jack adapter.

I hooked my laptop to my hdtv using vga cable only have video how to connect audio to tv

how to connect audio from computer to hdtv using vga cable for video.

Hi:
You'll have to run a cable from your headphone out jack into your audio in jack on your TV.
Paul

I have HDMI connection to the receiver and on to the TV - but no audio from my new Apple TV. I have checked all connections and the video is xlnt. Have also toggled thru every possible Dolby/Audio combination in settings. Help! Any suggestions?

I have an HDMI connection to the receiver and on to the TV - but there is non audio from my Apple TV. Not for movies, music, YouTube etc.   I have checked all of the connections and the video is xlnt. Have also toggled thru all possible Dolby/Audio combinations in settings. Help! Any suggestions?

Hello again Parker -
The basic setup is Digital Cable Box, DVD Player, Denon Receiver/Amp and TV Monitor. To that I added the Apple TV. The Receiver only has two HDMI IN slots (one for cable and one for the DVD) and one out to the Monitor.
[I bought a switcher to toggle the DVD and the AppleTV back and forth but just disconnected the DVD to simplify when I ran in to trouble.]
So now I have:
     HDMI from the Cable Box to the Receiver
     HDMI from the Apple TV to the Receiver (in the old DVD slot which always worked well)
     HDMI from the Receiver to the Monitor
     RCA's from the Receiver to the Subwoofer and the other speakers
In addition I have some backup connections:
     S-Video, Optical Audio and L/R RCA's from the Cable Box to the Receiver
     S-Video from the Receiver to the Monitor
Wait - JUST FOUND IT!
By going thru the excercise to track all of the connections per your suggestion, I found an anomaly when I switched Receiver sockets for the HDMI links. The video moved but the audio didn't. Turns out the monitor was using the optical audio feed from the receiver. So I disconnected the optical audio and the monitor automatically switched to the HDMI audio feed!   Looked promising...
So I first connected an optical audio feed from the ATV to the receiver - Audio! Then I pulled it, but the audio didn't switch to the HDMI feed. It stopped. Would be OK if all I was going to use is the ATV, but I need the DVD player too and I can't use a switcher to toggle between them if I have to unplug the optical audio each time.
This is becoming a career! Any suggestions?
Will

I recently purchased an Onkyo stereo receiver with a wireless USB adapter, UWF-1, and want to stream audio from my MacBook Pro through my stereo system. The receiver tells me it is connected to my wireless LAN, but I cannot get music to play?

New to the community here, thanks for your patience. I recently purchased an Onkyo TX-8050 Network Stereo Receiver with the UWF-1 USB adapter with the intent to stream audio from my MacBook Pro to the stereo. I have gone through the setup instructions for the adapter and the receiver gives me a message saying that it is connected to the password protected network, but that is as far as I can get.
I have gone into iTunes and clicked on the "Open Stream" option, but I just get a pop up box labeled "URL" that is empty. I have Home Sharing turned on and File Sharing turned on, but I am not seeing the receiver in my Finder window or as a iTunes device.
I would appreciate any and all advice and assistance.
Thanks so much.
Dan

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

Re: Not getting audio from TV when connecting MacBook Pro with all correct cables.

How do I get audio from the TV when connecting MacBook Pro with all the correct cables?

Hi Lynn,
If you're positive you have the correct cables, and positive they work, they must be plugged into an input on the TV made for that purpose, then that input must be selected on the TV's menu.

Using audio from a WebSite in a connect session.

I am using VoIP to present Websites that have voice recordings (and other audio) embedded in them. Is there a way to enable Connect 7 to present VoIP and the audio in Web sites? In my attempts participants can hear me but not the audio in Web sites. Help would be appreciated. Thanks ...

Adding to this: could it be that because the audio-from-a-clip comes from a different location (in fact an external disk where the movie project is) while the rest of the voice-over music tracks come from my iTunes?

Where did the "record audio from speakerphone" option go in Connect 8??

When I went to start a recording today in Connect 8, I noticed that the "record audio from speakerphone" option is missing on the pop-up where you enter your recording name and description. Where did this option go? This is how we record all of our meetings where we do not have integrated audio (usually due to using an operator assisted line.) I did double-check my flash settings and made sure the meeting had access to the microphone.

Connect 8 records all audio from the Phone if that was used, or VOIP or via Universal Voice. It picks up all audio in the meeting.
If you have associated a universal voice audio profile with the meeting, choose Audio > Join Audio Conference.
Choose Meeting > Record Meeting.
In the Record Meeting dialog box, enter a name and summary for the meeting recording.
A recording icon (red circle) appears in the menu bar to indicate that the meeting is being recorded.

NO audio from laptop speaker when phone connected to Bluetooth with media audio checked

Hey guys, when I connect my Verizon Samsung Galaxy SIII (SGS3) phone through my Toshiba Qosmio x875-Q7280 Windows 7 X64 Bluetooth with media audio checked on my SGS3; for what ever reason there is no audio playing through the speaker when I try to listen to my music and for what ever reason I notice in the recoding tab under Sound my SGS3 profile mic audio bar was moving up and down. When I went in to configure it, I click a check box which played the music that I was playing through the laptop speaker but it sounded all muffled. If anyone can help would very much appreciate it.
Solved!
Go to Solution.

Just wanted to update just incase someone else is have this same problem also, so I manage to solve this on my own my installing a bluetooth driver from Intel. I'm not sure if link posting is allow, so I'll just direct you there. If you google Intel and navigate to their download center, search for Intel® PROSet/Wireless Bluetooth Software for Windows 7* it should have two choice 32 bit and 64 bit. After it finish installing there should be another bluetooth icon in your bottom right tray. Next right click the bluetooth icon and add a new device as you would any other and enable media audio from your connected device (in this case it would be my Samsung Galaxy S 3) and you should be good to go with music or what ever sound coming out through the laptop speaker.

I cannot hear the audio from my Apple TV when the speakers connected to an airport express is selected from AirPlay

I cannot hear the audio from my Apple TV when the speakers connected to an airport express is selected from AirPlay

me-p wrote:
Is it true?
for the time being, yes.
however, Airfoil can do what you want.

My connected audio only clips moved from below to above the timeline. What happened? How do I get them below the timeline again?

My connected audio only clips moved from below to above the timeline. What happened? And how do I get them below the timeline again?

Repeatedly crashes. What I ended up doing was using a backup Final Cut Projects file and jettisoning this one with the glitch. Luckily, nada much lost. I've had a couple of these weird glitches happen in the Timeline, esp. when dealing with compound audio-only clips & some fx's and rather than spending mega time trying to fix the problem, I bail and start again, and try to be more methodical in my approach.

Recorded Meeting plays audio from connect url but offline does not

Hello,
I recorded my meeting using audio from telephone conference (which is a nice new feature for 7.5 if not using one of the supported phone conferencing systems). When I play the recording from the adobe connect site URL (or choose edit) the audio plays. When I do a "make offline" it creates the presentation only with no audio. Is this a limitation that I did not read about or am I doing something wrong?
thank you

use this code "Component control = player.getVisualComponent(); "
instead of this code " Component control = player.getControlPanelComponent();"
But if you want show both of them, modify as following
Component control1 = player.getControlPanelComponent();
Component control2 = player.getVisualComponent();
then add the two control (control1 & control2 ) to your JFrame panel

No audio from HDMI connection??

I have wonderful video but no audio from G70-460US. It has been upgraded to Win7 with the HP disk. Any help would be greatly appreciated and thanks in advance!

Hi,
I've replied on your original post on the link below.
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/No-HDMI-audio-with-Windows-7-Ultimate/m-p/6...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Video/Audio from new macbook to HD TV?

So, I'm wondering how i can connect the new MacBook to my HD TV which supports HDMI. Can i connect a mini DisplayPort/HDMI adapter and get both video and audio into my TV?
I haven't seen any adapters of that kind in Apple Store.
Is there perhaps another way to archive this?

Barring some other adapter being released, either by Apple or a third party, you'd get the Mini Display Port to DVI adapter and then use a DVI to HDMI adapter/cable. You'll also need to connect the audio to the TV separately, so check to make sure your TV will allow audio from a different input when using the HDMI input for video; not all do.

Connecting Audio from DV1000 to TV

Similar Messages

Maybe you are looking for