Connecting audio in to audio out

I have a G4 with audio input and audio output jacks. How do you get the input to link to the output so you can listen to your input source through your output speakers? I have tried CD SpinDoctor and it does a software link between input and output, so a vinyl record being played on the input is audible on the output, but without this software, there is no link. Is there a system link or setting that does this??
Rick

You will still need a software "link" to your system's output. I do not believe there is a direct connection between the two.
Regards,

Similar Messages

  • When Viewing Adobe Connect Training, why are Audio/Video out of synch

    I am a new Captivate 5.5 user and I have been using the Adobe Connect Training material to come up to speed on the product. However, I have noticed that when viewing presentations in Connect, over time, the audio and video eventually are completely out of synch. What is being discussed (in the audio) has nothing to do with what is being shown on the screen. This happens on all Connect Training videos.  I have a high-speed Internet connection and I never have problems with streaming content from other sources such as YouTube, etc.  What am I doing wrong?

    Dang, though it was worth a shot.
    Now, one user here, Jim Simon, uses similar, and has worked out a percentage that he adjusts the remote mic's material to fit with his camera. Cannot recall exactly now, but it seems that he alters the Audio by a factor of about 104%. My memory is cloudy on the exact figure, and Jim seems to be on extended holiday. Not sure now, if he uses the Rate Stretch, or runs his mic's audio through Audition. Sorry that the memory is so fuzzy now.
    Good luck, and maybe Jim will show up with his exact figures, to give you a starting point.
    Hunt

  • I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

    Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
    Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
    Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

  • Digital Audio In to Line Out Not working.

    How do you route digital Audio in to Line out?  I have a 2010 Mac Pro, running digital in and have validated it's a good signal.  No sound through the line out.
    In the interim, i've used Audio Hijack to route it through the line out with no issue.  I'm confused as to why i must use this 3rd party product to route the audio. Any ideas, this can't possibly be a new problem.
    Thanks!

    I've had problems connecting my computer to my cable box as well. Comcast apparently disables some of the functions on its boxes. Call your cable company. It's most likely a problem with your box, not your computer.
    Good luck and if you find the problem let me know.

  • StreamigHow to get audio component of Video out of AirPort/stereo using MBA

    Ok will some one help me with this please:
    I was experimenting with streaming video. I was watching Leo Laporte's TWiT Live show
    http://twit.tv/roz13
    where he was talking to Roz Savage the woman who is rowing across the Pacific alone ! This was live feed (including rower's audio from the middle of the ocean); very cool ! Laugh but she is half way to Hawaii and she has already rowed the Atlantic (no sail). The show is called Roz Rows. Leo checks in with her several times a week. Past shows are on iTunes.
    Ok I got off track but she is truly awesome in a time when that word is used to describe somebody's socks.
    My happy MacBook Air experience to get off the track again: On battery I was watching the live video stream and my iStat showed heat ~55 C and fan 2800 rpm very cool !
    I was getting down to 25% battery so I plugged in the charger cable. The temp climbed slowly but predictably to the high heat side of the scale (68 C 6200 rpm) and stabilized. Once again hot but I am happy.
    Interesting how cool it was before hooking up charging lead. I am so happy about that !
    Now we get to the question ta da !
    I want to know how to get the audio for the streaming video to come out of the audio system connected to my Airport Express. Listening to music on iTunes it works fine. Watching an iTunes purchased TV episode on iTunes it _does not_ (the sound comes out of the computer speaker) no matter the setting on the low right hand corner of the window. Perhaps I should be in the iTunes or AirPort discussions but wanted to post positive experience here with streaming video using MacBook Air.

    it might be possible using airfoil or similar utility...
    http://www.rogueamoeba.com/airfoil/mac/
    ...but you will probably find that audio/video are badly out of sync due to the latency on the streamed audio
    if the video is playing in something like vlc you can compensate by adjusting the audio/video sync (although it is fiddly and drifts because the latency varies) but in itunes you can't

  • IChat won't send written messages...but will connect to do an audio chat...

    I'm not sure what happened, but my iChat just stopped sending text-based messages. I can log on, click on a person, and type a message, but it won't send. I can, however, connect and do an audio chat. Has anyone had this happen before??

    Hi,
    Next Bit.
    In iChat > Preferences > Accounts then the Server Settings tab, what is the Login port currently in use ?
    For AIM Logins this is normally 5190 by default. We post about changing it to 443
    Is SSL an Option for you and is it Selected ?
    Try it deselected if you have it (iChat 5) - you need to be logged out to make changes.
    iChat logs in on port 5190 on the TCP Protocol with any Buddy list that accesses the AIM Service.
    It also uses this same port but on the UDP Protocol for File Sending, Direct IMs (Those with Pica and Files sent in them) and group chats. Some Buddy list Feedback is also on UDP.
    Changing the Login port separates the dual use.
    If the AIM SSL server goes down iChat needs a manual reset to get it to work again.
    If changing either of those does not produce any changes then try Deleting the Account/Screen Name from iChat then Re-adding it again.
    You will not lose your Buddy List as it is held at the server end.
    7:11 PM Thursday; March 3, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • Can I connect my PA to my external audio card M-Audio Fast track Ultra?

    Hello
    I wonder if it's able to connect my PA to my external audio card, _M-Audio fast track ultra so that I can use every input from my PA and use them in logic._
    Any Ideas?
    Best regards Frankensten

    So I should connect 2 guitar wires from the main outs, left and right to some of my audio card inputs and then Logic should recognize the sounds we are playing on the pa?
    That should work.
    Logic wont get any signal from the pa instrument if i don't press the front rear button on the audio card
    That's normal. Those buttons control which jacks are active.
    the sound is very low
    Connect headphones to the headphones jack on the PA and make sure you're hearing a nice loud signal. You could also connect the headphones to the headphones jack on the Ultra, to check for a signal there.
    There are level controls on the front of the Ultra. Try cranking them up. Also, make sure they are pushed in. When you pull them out, you engage a 20dB pad.
    Also, look at the LEDs on the front of the Ultra. Are they glowing green? This means they are getting a signal.
    In my PA there's two Monitors that I would like to use for logic, how would I do that?
    You would connect outputs from your audio interface to inputs on the PA. You could use the channel inputs, or you could use the tape inputs.

  • Audio concern with optical out (headphone jack)

    According to Apple, unless I am blind, Macbook pros from 2008 cant support 5.1 via toslink in the headphone jack:
    (Copied from Apples Tech spec page)
    Connect external speakers, headphones, or optical digital audio equipment. The headphone / line output jack accommodates optical digital audio output, analog audio output with a 24-bit, 44.1-192 kHz D/A converter, *digital audio output up to 24-bit stereo and 44.1-192 kHz sampling rate* and supporting encoded digital audio output (AC3 and DTS). For analog headphone / line output a standard audio cable with 3.5mm metal plug should be used. For digital audio, a standard toslink cable with a toslink mini-plug adapter can be used.
    Yet I read how people say they get 5.1 working. I don't get it. Apple says only up to 24 bit stereo.

    Look in the Audio MIDI Setup utility when connected to the receiver and see if you can select it there. IIRC you must have a DVD encoded in surround sound in order to have the Mac put out the surround audio.

  • Having audio object use multiple outs

    is it possible to have my autoload setup to where my audio tracks and instrument tracks use multiple outs?
    example.
    setup audio track 1 to use out 1-2 and out 2-3.
    reason.
    i have my mackie hr824's on out 1-2, but i have another set of monitors that i would like to use for an a/b setup. i don't have the money to purchase a mackie big knob, or a presonus device. per other discussions i have my env setup with a layer to control the outputs of my RME. what i would like to do is to connect the other monitors to outs 3-4. keep them muted until i need to use them. i just need to know i you can setup audio objects to use multiple outs.
    ciao

    what do you have you PDC set to in the preferences?
    I use all three settings, at times. I'll turn PDC off if I need to use software monitoring with high-latency plug-ins on other tracks, but really, the best solution is not to track with too many plug-ins on anything. PDC is designed for playback/mixing, not tracking, and in 7.2.3, I've found it works well (although not exactly the way I'd like it to). For tracking with plug-ins, you'd likely want different behavior, to compensate for the fact that you're playing along with tracks that are already delayed due to plug-in latency--it's different from playback.
    At any rate, my best advice at this point (with any DAW, as far as I know) is that you shouldn't track with high-latency plug-ins on any tracks or busses that are time/rhythm references, regardless of PDC settings. For mixing, the "All" PDC setting should be fine.
    And the PDC setting doesn't affect the mix bus routing at all (no latency at any setting), unless you have plug-ins on that mix bus when tracking, which again, isn't a good idea re: performance timing.
    James
    [email protected]

  • K8NGM2-FID - connecting of front panel audio (AC'97)

    Hello,
    I have a K8NGM2-FID based pc running XP Prof. I have a Chieftec LCX-01B-B-SL case with front panel audio. This panel is compatible with AC'97 standard. PIN Assigment of the internal Frontpanel connectors for Audio is below described:
    I red in manual of my mobo:
    "The JAUD1 front panel audio connector allows you to connect to the front panel audio and is compliant with Intel® Front Panel I/O Connectivity Design Guide."
    I red Front Panel I/O Connectivity Design Guide (downloaded from intel site) and:
    "2.3.3 Audio Design Considerations
    Front panel audio design in conjunction with motherboard audio header design is dependant upon the type of audio CODEC being used on the motherboard. In the past, AC97 Integrated Audio CODECs were prevalent. With the introduction of Intel High Definition Audio, many new motherboard designs are switching over to High Definition (HD) audio CODECs. Designersshould note that AC’97 and Intel High Definition Audio front panel motherboards and I/O cardsimplementations are different and may not be directly compatible or interchangeable
    CAUTION
    It is strongly recommended that motherboard designers only use Intel® HD Audio analog front panel dongles with the Intel® HD Audio analog front panel header to insure that the jack detection and dynamic re-tasking capability is preserved. Passive AC’97 analog front panel dongles (ones which leave the 5V Analog pin-7 line unconnected on the dongle) may be used with the Intel® HD Audio analog front panel header. But note that the front panel jack detection and re-tasking functionality will be lost as the AC’97 jacks cannot support connection to the SENSE line. In addition, software must be aware that an AC’97 dongle is being used with an Intel® HD Audio analog header since the software might need to dedicate codec ports that are connected to the header to meet the product’s intended functionality.
    2.3.4.4 AC’97 Header Pin Jumpers
    The rear panel audio output jacks are disabled when headphones are plugged in. If the front panel interface board is not connected to the front panel audio header, jumpers should be installed across header pin pairs 1-2, 3-4, 5-6, and 9-10. If these jumpers are not installed, the rear panel line out connector will be inoperative and microphone input pins 1 and 3 will be left floating, which could lead to elevated back panel microphone noise and cross talk.
    NOTE
    Motherboards that have the foot print for a front panel header, but depopulate the front panel audio header must have 0 ohm resistors as options to connect the FP_OUT and FP_RETURN signals. These resistors must be installed when the header is depopulated to insure audio is routed
    to the back panel."
    Can I connect this front panel audio to front Panel Audio Connector (JAUD1) of K8NGM2-FID (Realtek High Definition Audio)? Will it be work correctly?

    No I don't think it will, I had the same problem with my Coolermaster Centurion case, the pin out configs are different. I just left it disconnected, and didn't worry about it

  • Audio in and audio out is not working in imac after i install lion 10.7

    i have a imac i update my mac to lion 10.7
    after that i open grageband and it sayes no adieo in and out are found
    and i also loke in the grageband preference  and i loke in Audio /MIDI
    and audio output say no drive found and in is same thing
    but on MIDI Status it sayes 1 midi input found
    enebody know what will be the problem

    Hi gusto,
    I checked the above mentioned KB and the fix that worked for you is in the KB: https://help-internal.adobe.com/content/help/en/creative-suite/kb/acrobat-failed-launch-30 -days.html
    Try running the patch again and see if that helps.
    Regards,
    Rave

  • I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

    I have a band video that I want to edit. In iMove 09, I could clip to crop or add a transition or both without altering the audio. In iMovie 11, the audio lower or drops out when I clip for and use a transtion. Is there a setting to preven this?

    Thanks for that info! Even in my time answering questions on iMovie Discussion Group, I never had a good understanding of when and how Optimize Movie came into play. I always would import as Optimized and Large Size and figured that was good enough. But knowing you got much, much more flexibility doing it the way you describe gives me a much better understanding of the different routes you can take into the Event Library.

  • Looking for a way to get built in audio to be heard out of AirTunes

    Looking for a way to get built in audio to be heard out of AirTunes, not just iTunes.

    thanks for the post, i downloaded that app but like i read, its really a worthless piece of junk, the 2 second delay yet alone i did not succeed to send my iChat audio to my airTunes speakers.

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    System Preferences>Displays
    There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen

Maybe you are looking for