Connecting audio speakers via external Bluetooth module

I have an USB bluetooth module (manufactured by Broadcom) to connect to a bluetooth-enabled stereo, but it won't work. I think it must be a software problem. Can anyone help with this?
The device is set up properly, and paired with the stereo.
But in System Preferences > Bluetooth > Devices, it says "Connected: No".
I've updated the Bluetooth software (from Apple).
I've rebooted with the device plugged into the USB port.
I've confirmed (in System Profiler) that the port is recognized.
And I've managed to play music on the same stereo using a different laptop with a built-in bluetooth device.
Can anyone help me resolve this? I'd be really grateful.

yea i have the same problem...no idea how to get the device to say connected: yes

Similar Messages

Can't connect to speakers via bluetooth since updating to Windows 8

Hello all. I have an HP Pavilion dm4 3050 laptop. I have spent a lot of time trying to fix my bluetooth problems since updating to 8, and now I need some help!
I go into add a device in a the CP and the machine finds the bluetooth speakers and I add them. I then right click them-> sound settings, then see my speakers below the default device speakers. They are listed as disconnected so I right click them and try to connect but they won't connect. I have updated the Intel bluetooth drivers but the speakers still won't connect. What can I do? Thank you.

BTW it would be nice if the driver update scanner actually worked on the HP website.

Connecting 2 comps via MSI bluetooth

I cant do it!
tried lots of different ways...
all i get is:-
The Network Access connection failed; Could not connect to the remote device.
Error in pairing with device admin
or enter a pin code. managed to get rid of that.
Anyone know anything about this at all? I have done what the manual says. tried playing with all the bluetooth settings, tried assigning specific IP addresses to the bluetooth network, making dure the IP address differs from the main company network IP address. i.e 102.168.0. = company 192.168.2. = bluetooth.
tried taking out authentification. tried it on different computers too.
They find each other but wont connect.
Some help would be cool!

Have you contacted Q-Interactive Assess support?

TS3048 My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

My early 2009 Mac Pro does not connect via bluetooth to my sound bar or bluetooth mini speakers. Both my wireless keyboard and mouse have no problems connecting. What do I need to do to connect to external bluetooth devices?

I would always have a wired keyboard and mouse on hand (need not be expensive ... any cheap wired devices will work). "Emergency recovery" procedures can activate features in random order, so the opportunity to select a recovery partition may pass before the wireless devices are recognized.
That will let you select the "turn on Bluetooth" icon.

X100 e connecting to Samsung audio dock via bluetooth Windows 7

Hallo,
I want to connect my x100e via Bluetooth to my Samsung audio dock.
- Bluetooth is working
- laptop found audio device via Bluetooth
- the device is working according to the control panel hardware and devices
So far so good. But when I try to use the audio device the sounds still comes via the laptop speakers.
Control panel - Hardware and Sound - manage audio devices doesn't show the Samsung dock but only the speakers
Is there anybody who can help me to fix this problem?

Hi,
As Rick said, this would be caused by hardware and software compatibility, you should check this following articles, try to update
the device driver for a test:
Error: "Bluetooth peripheral device driver not found" when you try to connect a bluetooth device
http://support.microsoft.com/kb/2654568/en-us
Update a driver for hardware that isn't working properly
http://windows.microsoft.com/en-us/windows/update-driver-hardware-isnt-working-properly#update-driver-hardware-isnt-working-properly=windows-vista
Alex Zhao
TechNet Community Support

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

I have an Airport Express connected via optical toslink to a dac/amp in turn connected to speakers. When using iTunes I get message "no speakers connected to Airport Express" and audio sound has drop outs.

Ok, if you are connecting the AirPort Express Base Station (AX) to the existing wireless network, then the DSL in the next room is most likely a combination DSL modem and wireless router. Thanks for clarifying that for me.
Although they may only be separated by a single wall, the building material used in that wall may be enough to prevent the AX from receving a "good" signal from the DSL router.
Since I don't know what computing equipment you have available, please check out this AirPort User Tip: AirPort - Optimal Base Station Placement to see if you can get some SNR measurements at the location of your AX. To do this properly, you will want to power-off the AX and only get these measurements for the DSL router.

I find there is a slight delay between my macbook speakers and external speakers connected via Airport Express. Is there a way to rectify this? Thanks!

Music plays out of sync between my computer speakers and externally connected throught Airport Express speakers.

Unfortunately, I don't have either a Slingbox or iHome speakers so I won't be able to reproduce any of the issues you are having. With the fact that you live in large apartment complex would still lead me to believe that Wi-Fi interference may be the reason that you are having streaming issues.
I suggest you perform a simple site survey, using utilities like iStumbler, or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible.

How do I connect Apple TV to external speakers and my TV?

I just bought an Apple TV for my studio apartment and have it connected to my TV via HDMI, and use AirPlay to stream my music and videos. Video works great, but the my TV's internal speakers are low quality. So, I would like to have my audio come from external speakers (which I have not bought yet), for the following 2 scenarios:
Listening to music via AirPlay, preferably without having to turn my TV on.
Watching videos on my TV, with the audio coming through my external speakers rather than the TV speakers
I see my Apple TV has an Optical Audio (Toslink) port, but the salesperson at the nearby electronics store said none of their speakers have Toslink cables, only 3.5 mm (or USB). The only solution I found is an AV receiver box that has optical input but costs hundreds of dollars. I am looking for something cheaper and am willing to settle for "pretty good" sound quality.
Is there another way to get this to work?
This article recommends using a digital audio converter (DAC) to connect the Apple TV to a stereo amplifier. This seems like it would satisfy scenarios (1) and (2) above.
Also, I found this "Toslink to 3.5 mm adapter" for a few bucks; could I just plug that into my Apple TV and then connect it to any speakers (like computer speakers) with 3.5mm input?
Any ideas would be appreciated.

Rex,
Since the toslink is optical, the 3.5mm adapter will not work for you as it is only ment as a conversion to a mini-toslink cable. Your first option of using the DAC, is in my opinion the best and perhaps only way to get audio out without going to a fancy amp or tuner first.
One option that I'm considering is the Bose Solo TV sound system. It might set you back about 4-Grant's, but I generally enjoy the sound of bose for most music/tv/movie purposes; and it has a direct optical audio input that you can run either from your tv or your ATV. Whatever audio you're sending to your TV via the HDMI, should go to these speakers through your HDTV's toslink output with equal digital clarity.
I've read a few other posts on the apple discussion forum which lead me to believe that the optical output of the ATV might not work so well after the 5.2 update... so whatever I do, it won't be JUST for use with the ATV.

Audio coming from both TV Speakers and external soundbar - how do I suppress the TV audio output?

Just after my warranty expired, my Toshiba 55TL515U started to play sounds through both the TV's speakers as well as outputting audio to my external Polk Audio soundbar, which is connected to the TV via the Digital Audio Output line. The TV never did this after I connected the external soundbar until a few days ago.
I don't want any sound to come out of the TV speakers, I only want sound to come out of the soundbar. There's a horrible echo effect that occurs when both sound systems are active.
I don't see a setting on any of the TV menus to control this. I would assume that if the TV senses an external audio device, it would no longer output any sound to the TV's speakers.
Is there a setting on the TV I'm missing, or is this something broken within my TV?
I called Polk Audio tech support, and they claim it's not a problem with the soundbar, but with the TV.
If anyone can comment on this, I'd be very thankful.

I have the same problem. When I mute the TV, I get sound only from Soundbar which is fine. But, everytime I turn on my tv, I had to mute my tv. And if I accidently press the volume button on TV, then both TV and Soundbar plays sound and that sucks.

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)
the s10 works perfectly on my ipod touch 4g.

this is
ERROR HAS OCCURRED Bluetooth audio.
It failed to establish connection with their
audio device. make sure it is on and
in the range. you may need to restart the
audio section of the program you were using
STOP USING THE HEADSET WITH MICROPHONE.
ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac

Connect an ipod to external speakers and amplifer

how can i connect an ipod to external speakers and amplifer

Rex,
Since the toslink is optical, the 3.5mm adapter will not work for you as it is only ment as a conversion to a mini-toslink cable. Your first option of using the DAC, is in my opinion the best and perhaps only way to get audio out without going to a fancy amp or tuner first.
One option that I'm considering is the Bose Solo TV sound system. It might set you back about 4-Grant's, but I generally enjoy the sound of bose for most music/tv/movie purposes; and it has a direct optical audio input that you can run either from your tv or your ATV. Whatever audio you're sending to your TV via the HDMI, should go to these speakers through your HDTV's toslink output with equal digital clarity.
I've read a few other posts on the apple discussion forum which lead me to believe that the optical output of the ATV might not work so well after the 5.2 update... so whatever I do, it won't be JUST for use with the ATV.

No sound through tv speakers after connecting dv7-1247cl via hdmi

no sound on laptop after hdmi for external screen is plugged.if unplugged sound on laptop is ok

Hello guanaco1,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how there is no sound coming to the TV from your DV7-1247cl notebook over an HDMI connection, and I would be happy to assist you in this matter!
To further diagnose the issue, I recommend following this document on Troubleshooting Audio Problems with External Speakers, Headphones, and HDMI Sound Devices. This should help with the sound transfer from your notebook to the TV.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Have a great weekend!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

You can output audio thru HDMI, with appropriate adapter.
You can use additional cheap external usb audio for monitoring.

Feature Request: Support for External Synths/Modules (via MIDI)

Hi,
I just posted a feature request (via the Apple Feature Request form) but also wanted to post here. I use a combination of hardware instruments (sound modules) and software instruments.
*My Setup*
- Keyboard #1: M-Audio Axiom 25 (also includes a USB MIDI interface)
- Keyboard #2: Roland A-33 Controller Keyboard (via my Axiom-25's MIDI In)
- Edirol USB MIDI Interface (sound modules plugged into MIDI Outs)
- Sound Module #1: Roland JV-1080
- Sound Module #2: Yamaha TX802
MainStage currently takes care of all my software instrument needs, however, what is missing is the ability to add external physical MIDI devices as either patches or as channel strips. I would like to use a combination of software and hardware instruments in the same song, and control this via Mainstage.
Example:
- Patch 1 could potentially contain 2 software instruments, each seperately controlled by a physical keyboard (this is currently possible)
- Patch 2 could contain 1 software instrument and 1 external sound module each controlled by a physical keyboard (this is currently impossible)
- Patch 3 could contain 2 external sound modules, mapped to different ports and/or channels, and therefore independantly controlled by my 2 keyboads (this is also currently impossible)
Would I be correct in assuming that this is a fairly common limitation of MainStage?
Message was edited by: olafwagner

I have achieved MIDI out from Mainstage, thank to the information found on this forum..
what I actually do is send Prg Change from every preset I select to control a hardware vocal harmony pedal. this way i don't have to remember which setting i use on every song or even, section of a song.
*Step 1:*
Library>application support>Logic> create a folder named precisely MAINSTAGE CALLBACKS
inside of it, create an applescript with this code
on action(parameter)
set myprogramchange to programchangenumber of parameter
tell application "MidiPipe"
MIDISend toPort "MidiPipe AppleScript Input" withData {192, myprogramchange}
end tell
end action
*step 2*
download MIDIPIPE from http://homepage.mac.com/nicowald/SubtleSoft/
and install it in your apps folder
*step 3*
start midipipe, and define the following modules
MIDI IN-> use applescript input from menu
MIDI OUT-> route to your midi interface desired output
save this to a Midipipe file you can easily access
Now, when I go to a gig I FIRST (this is important) load midipipe and my preset, and just hide it and let it work in the background
Start mainstage, and set the program change of every PATCH to what I want to be sent over MIDI OUT when I enter the preset (-1 if needed or modify the previous applescript).
Ok, this just gives you Prg change... if you want something like CC or others, you can look at some of the example files on midipipe, and write your own applescripts to be used from a control within mainstage (you know, select a screen control, and assign it to an applescript located in library>application suport>logic>Mainstage scripts. you have to tell the applescript to receive incoming data from mainstage and send it (with even some filtering or transforming) to midipipe to go to the outside world.
One last idea: i used a free plug-in called MIDIIO that, although the plugin analysis on mainstage might say does not pass, you can use it anyway, and lets you insert it as if it was a plugin instrument...then you just route your screen controller to a MIDI parameter on that track, and there you go...but in the past it was not as solid as the midipipe solution.
I am still investigating...I am pursuing having my hardware controller knobs to follow screen settings everytime I just change a patch, but lack some info on how to get parameter values when entering the patch ¿anyone knows, blueberry, zuelito...? I promise to share the results!
best

My laptop's internal speakers have stopped working since i connected my wireless beats through bluetooth

My laptop's internal speakers have stopped working since i connected my wireless beats through bluetooth. It's as if it no longer recognises any other audio output, even when i have disconnected the headphones

System Prefernces > Sound > Output
Internal Speakers selected?
"Mute" enabled? Disable it
Reset PRAM. http://support.apple.com/kb/PH4405
If this does not help, try resetting SMC.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Connecting audio speakers via external Bluetooth module

Similar Messages

Maybe you are looking for