Connecting backup server to brocade switch help
Hi all
We are implementing a new backup server for our SAN, the server currently had one connection to our brocade switch, is it possible to put a second connection to the brocade switch from the server? and will it team them or become a failover connection, I believe the FC card in the server is Q Logic
hope you can help
thanks
Carl
There are no restrictions whatsoever to how many ports you use to connect from your server to the switch. I had a single server that used 16 ports to each switch.
I was wrong with the first post as I got sidetracked talking about how FC does trunking. You can't trunk from the server to the switch. It does from switch to switch though. The server multipathing software manages the traffic to the storage array normally in a round robin approach.
If you just have a backup server <-> switch <-> FC tape drive, the traffic is managed by the backup media agent. Backups are pretty simple as tape drives are just one thing. They are not like storage arrays.
As far as broadcast goes, look up RSCN.
FC networking is different to IP so get a book and read up about it.
Similar Messages
-
My Facebook app stopped working on my iPad. It keeps asking me to put the FB password in settings. When I do it tells me "unable to connect to server". Can anyone help?
This problem affects many (including myself) and seems to be a bug in the integration of the FB app in iOS 7.
You can get around the login problem by turning Settings/Privacy for FB off. However, after you turn that Privacy setting back on after logging in, then iOS 7 will continue to pester you with pop-up messages to enter the password in Settings. This will invariably fail with the error message that you have already experienced, but at least it gives a way of logging in.
The solution will in my view have to come jointly from Apple and FB. -
I'm trying to open my email but I keep getting cannot connect to server! Can someone help me or should I just go to an apple store?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... (But can take Longer..)
Release the Buttons...
More > http://www.apple.com/support/ipad/mail/ -
When sending emails it says connection to server lost can anyone help
I have an iPad which is not sending emails, it says connection to server failed, anyone got a clue please
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.htmlhttp://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.htmlhttp://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
How do I get Safari to connect to server on I-Pad 2?
How do I get Safari to connect to server on I-Pad 2? I get the message "Connection to server has failed",
Please help! Needless to "say". this question is not being sent from my I-Pad.Tthank you for your reply. After much frustration,I shut the I-Pad completely down, pushing both the side button and top button simultaneously until only the apple logo appeared on the screen. Miraculously , the e-mail appeared and everything is now back to normal.
For future reference, what under "general" do you do to get "reset"? I'm not tech-savvy as I'm sure this statement indicates.
I'll appreciate a response and thank you again.
Aixme -
Connect 11g server from client
Hi,
i have 11g daatabase and 11 g client. can u please help me to connect 11g server from client
pls help with steps
thanksChinu wrote:
Hi,
i have 11g daatabase and 11 g client. can u please help me to connect 11g server from client
pls help with steps
thankssqlplus
/ as sysdba
Handle: Chinu
Status Level: Newbie
Registered: Sep 19, 2009
Total Posts: 323
Total Questions: 123 (102 unresolved)
why so MANY unresolved questions? -
Can we connect single server to the multiple switches?
Hello Team,
I want to redesign the Client network in order to provide network availability and fail over. I have designed attached diagram. I have doubt if we can connect a server having multiple NICs to different uplink switches.
let say NIC1-2 is connected to Uplink Switch1 and NIC3-4 is connected to uplink Switch2. I want to do this so that if uplink switch1 dies then still server would be accessible via switch2.
is there would be any problem like mac address flapping? also, I know we can configure NIC teaming but i am not too sure how that would be helpful with my attached setup.
can you guys please look at the attached diagram and provide me your inputs?
Thanks for response.Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
It depends on what the server's multiple interfaces support. -
i was updating my iphone 4 through settings but in the middle my phone switched offf n now what i can see is the apple logo blinking n i cant connect it to itunes can any1 help me?
If you have a backup of your information on your computer, I would suggest putting your phone into recovery mode, by holding down the home key and keeping it held down while you connect it by usb into your computer with itunes running. Keep the home button held down until it indicates recovery mode, and proceed with the restore.
-
Hi there, I am trying to connect to my server at work from home using a vpn connection. It connects fine and the time ticks along, but when i click go - connect to server, it comes up with connection failed. Please help!
... when i click go - connect to server, it comes up with connection failed.
If you're trying to connect to a Bonjour server on the remote network, that won't work over a layer 3 VPN. Use something like Hamachi or one of the SSH-tunnelling Bonjour proxy apps for that. -
Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!
what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN -
I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset. -
Dear Friends,
I am unable to contact my friends on FaceTime last 5-6 days. Although I am connected to the Internet and browsing my mails successfully, when I sign into FaceTime with correct ID and PW a message appears ' cannot connect to server. pl check Internet connection' this is very confusing. Pl help.
thanks
ARabinda GangulyMake sure your time zone and time are correct. Have the iPad get the time automatically.
-
I need help authenticating my outgoing server settings in setting up my work email on my Galaxy S5. It says unable to authenticate or connect to server and I even called helpdesk at my email support and they tried every possible port (80, 25, 3535 or 465 SSL) and none of them work. Please help!
You will need to get the required info to create/access the account with an email client from your school.
Are you currently accessing the account with an email client on your computer - if you have a Mac with the Mail.app, or if you have a PC with Outlook Express, etc.? If so, you can get the required account settings there. -
updated to ios6 on my ipod touch 4g when i try to turn it on it doesn't, it just comes up with the itunes symbol and the usb, so i plugged into laptop opened itunes and it says to restore back to ios5 i pressed restore and it cant connect to server? help?
Maunally restore it. In order to do this:
-Download the iOS 5.1.1 firmware from here http://www.redmondpie.com/download-5.1.1-ios-for-iphone-4s-4-3gs-ipad-ipod-touch -direct-official-links/
1. After downloading the firmware from the given link, open iTunes and click on your device.
2. Now press SHIFT on your keyboard and while pressing it click on "Restore".
3. A dialog box will appear.
4. Select the firmware you downloaded and click ok.
5. Done!!! Your iPhone will now be restored to 5.1.1 and if you had backed up your iPod before, then you can put all its settings afterwards. -
after updating to ios 6.1.2 ipad2 ended up in restore mode, i have restored it and now i need this morning's the backup that's only on icloud
but after i login (succesfully) and acept terms & condition popups an error "Connection Error - server error: apple id couldnt be created" or "impossible to login there has been a problem while connecting with server" when it should start setting up the ipad.
any clues on whats going on? i really need this backup. what can i do? there is any other way to restore using the icloud backup from somewhere else?
thankshttps://discussions.apple.com/message/19556552#19556552
Level 1 (0 points)
brandonfromhenderson
This solved my questionRe: Apple ID couldn't be created because of a server error when i try to restore from a backup 13-sep-2012 9:49 (in response to brandonfromhenderson)
Found the solution! Go To Appleid.apple.com and set your birthday and other questons..
Maybe you are looking for
-
Replace Smart AC Adapter for HP 17-E054CA Notebook
I have a new HP17-EO54CA and it came with a Smart AC Adapter. I keep getting messages that I should purchase a higher output AC adapter as it may be needed for some applications. I don't know how to do this. i have Googled about as many combinations
-
Bluetooth connection with Samsung u740 not working quite right?
I have a new Samsung u740 cell phone and I set it up to sync my contacts b/w the computer and the phone. I also set it up so when someone calls me it pops up on my computer who's calling, but when someone calls it just says "unknown caller". I have s
-
Garbled Viedeo Playback.
Video play back on my new 120GB is garbled. The image is accompanied by red and blue noise that only ocures during video play back. The videos were downloaded through Itunes. How can I fix this.
-
m using PNP selection screen. i want to hide some of these fields. how can i do it.
-
a