Connecting Beige G3 to MacBook Pro???

Hi Gurus:
I packed my old beige G3 desktop (233 MHz; ah, nostalgia...) somewhere around May 2004 and stuffed it in a corner of my attic. Now I would like to access some Really Old Data, and was wondering whether I could somehow hook it up to my MacBook Pro (via ethernet?) to transfer them. And if it were possible, how shoud I set thing up? Many thanks for your help!
Kind regards,
Bas

Yes, Ethernet & File Sharing should work, what OS is on the Beige?
Good ol' Beige likely needs a new PRAM Battery...
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
"Mac OS X 10.4 and later don't support Personal File Sharing (or other AFP) over Appletalk, though by initiating the connection from the opposite direction you could still achieve an IP connection from a Mac OS 8 computer to a sharing Mac OS X computer. The Network preference pane in Mac OS X 10.4 and later still offers the AppleTalk checkbox, but it is for browsing AppleTalk-advertised resources and zones. The subsequent connection must be over TCP/IP."
http://docs.info.apple.com/article.html?artnum=106461

Similar Messages

  • How can I connect my early 2008 MacBook Pro to a tv through HDMI?

    I was wondering if there is a way to connect my early 2008 MacBook Pro to a tv using an HDMI port. My MacBook Pro has a DVI output. In the past I bought a DVI to VGA adapter and connected it to a TV that had a PC input that took VGA and a 3.5mm audio cable. I was wondering if anybody has found an adapter or cable that takes a DVI and 3.5 mm audio cord and has only an HDMI cord at the other end. I have a new TV that only has HDMI inputs and would like to be able to connect my laptop to it.

    Since you have not identified exactly what MBP you have, but mention DVI, I suspect a cable such as this is what you will need.
    http://www.ebay.com/itm/like/380694416929?lpid=82
    Understand that 2009 MBPs and earlier do not support audio via DVI or minidisplay port.  You would have to tap the audio output port  with a cable such as this:
    http://http://www.bhphotovideo.com/bnh/controller/home?O=&sku=691009&Q=&is=REG&A =details
    I am not endorsing these cable specifically, these are just examples that represent what connections that are required.
    Ciao.

  • Help Connect my Mid-2009 Macbook Pro to my new YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual Computer Monitor

    Hi,
    I am trying to connect my Mid-2009 Macbook Pro to my new YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual Computer Monitor.  I am not having a lot of luck. 
    My machine:
    OS: Mac OS X Lion 10.7.4 (11E53)
    Graphics Card: NVIDIA GeForce 9400M 256 MB
    Processor:  2.53 GHz Intel Core 2 Duo
    I am trying to connect it using the:
    Mini DisplayPort to Dual-Link DVI Adapter
    DVD-D HDMI cable
    YAMAKASI CATLEAP Q270 SE 27" LED 2560X1440 WQHD DVI-D Dual
    (http://www.ebay.com/itm/150788045871?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m149 7.l2649#ht_16597wt_877)
    Here is what is happening.
    1. I connect the Mini DisplayPort to Dual-Link DVI Adapter + HDMI Cable to Monitor
    2. Main monitor powers up like it is trying to display
    3. Laptop Monitor displays second part of desktop
    4. I can never get the Yamakasi to display a picture
    Here is what I have tried:
    1. Different HDMI-D cables
    2. ATLONA AT-DP400 Dual Link DVI to Mini Display Port Converter
    3. Zapping the P-Ram
    4. Powering monitor with laptop closed
    5. Forcing the system to see the second monitor
    The nearest I can figure:
    - The laptop does see the catsleap (it displays resolutions I can set it to)
    I am completely stumped, I was hoping someone could advise me.
    Thanks,
    Don

    Hey Kytarx,
    I found the winning combination this weekend. 
    I tried:
    - Apple Mini DisplayPort to Dual-Link DVI Adapter
    - ATLONA AT-DP400 Dual Link DVI to Mini Display Port Converter
    - Monoprice Mini DisplayPort | Thunderbolt® to HDMI®, DVI & DisplayPort Adapter
    My experience:
    - Altona didn't work at all, and their support claimed it would not.
    - Monoprice didn't work to Dual DVI, it did work to HDMI (great price I wish it did)
    - Apple Mini Displayport adapter did work, but would only work with certain USB + Display port combos.
    The thing that was tripping me up was that two of the Dual DVI-D cords were bad.  Once I found the working cord, it was easier to find the working adapter.  The experience I did find to be a frustrating / expensive one. However, the Monitor itself is beautiful.
    Hopefully this helps someone else..
    Don

  • How do I connect my mid-2009 Macbook pro to my HDMI television and get sound?

    How do I connect my mid-2009 Macbook pro to my HDMI television and get sound?

    Use a mini-Displayport-to-HDMI adapter and a standard HDMI cable to connect the computer to the proper HDMI port on your computer — the one that is paired with the separate RCA audio inputs (see the TV's manual for this information). And connect the headphone port on your MBP to those inputs with a cable that has a 1/8' stereo headphone plug on one end and two RCA plugs on the other. You'll also need to select the proper HDMI input in the TV's menu system, and you may have to select the headphone port as the audio output in the Sound pane of System Prefs on the Mac (or it may be selected automatically).

  • Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

    Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

    try xxx - may work
    _may_ work.

  • Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    Does anyone know how to connect an older 20" cinema display with the (ADC) adapter end and connect it to a MacBook Pro 17" 2008 model (DVI) ?????

    I believe you naeed the Apple ADC to DVI adapter.

  • Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
    That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
    Refresh & sesolution are the first things to look at.
    Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
    I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

  • I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work?

    I have the G Drive 1 TB (GEN4 1TB) external drive purchased in 2010. I need to connect to my new MacBook Pro. I'm using the external drive for media storage of my video editing projects. Will a 800fw to thunderbolt adapter cable work? I understand that using a USB port connection is not fast enough for video editing. I read somewhere the G Drives don't connect well to MacBook Pro.
    thanks
    larry

    I doubt this can be relocated or moved so you might want to just repost in the macbook pro area.
      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    Can you afford a new Thunderbolt case and cable? any case with FW800 is going to be slow 72MB/sec and less, and any new 1TB drive is capable of 75MB/s minimum up to 125MB/sec.
    Thunderbolt storage can of course when setup properly reach 100's of MB higher using multiple drives.
    Use what you have for a system backup or for secondary backup storage.
    you might be able to take the drive - most cases allow you to open and swap drives - and use this:
    G-Technology 1TB G-DRIVE mini High-Speed Portable Hard Drive                                   
    or this:
    http://store.apple.com/us/product/HB137VC/A/g-technology-4tb-g-raid-professional -high-performance-dual-drive-hard-drive?fnode=5f

  • HT3413 can I connect my new 15" macbook pro to 2 external video monitors?

    can I connect my new 15" macbook pro to 2 external video monitors?

    Not without an adaptor such as those from Matrox.

  • Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro.

    Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro . If I can how do I do it and what do i need to do it.

    No. There's no video input.

  • I have a 3rd gen Ipod touch and when i connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I connect this older iPod to my iTunes?

    I have a 3rd gen Ipod touch. When I connect it to my Macbook pro to sync it with itunes, it doesn't show up on iTunes. When I connect my iPhone 6 to my computer it syncs, backs up, ect. How do I make this older iPod show up on my iTunes?

    Hi ChristianHelpplz,
    Thanks for visiting Apple Support Communities.
    It seems like your iPod touch is not recognized by iTunes on your Mac, but your iPhone 6 is working normally.
    I recommend starting with these steps to troubleshoot your iPod touch and connection with your Mac:
    Check your USB connections
    Unplug other USB devices from your Mac and try again.
    Try a different USB port.
    Try a different USB cable.
    Restart your device
    Restart your iOS device or reset your iPod.
    Restart your Mac
    Turn your Mac off and back on.
    Update your software
    Check for software updates on your Mac.
    Check for an iTunes update.
    Check your security software
    If you have security software installed, learn how to resolve issues between iTunes and your security software.
    From:
    If you don't see your connected device in iTunes for Mac - Apple Support
    If you've tried these steps and your iPod touch is still not recognized, try placing it into Recovery Mode next:
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Sincerely,
    Jeremy

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • Connecting Mac mini to MacBook Pro retina?

    Hello,
    I just purchased a 13" macbook retina. I was wondering if I were to purchase a Mac mini, can I connect it to the MacBook Pro using that as a display through Target Display mode?
    Thanks.

    TDM is only supported in iMacs.

  • Connecting a 15.4" MacBook Pro to a Vizio HDTV monitor - which adapter?

    Hi, I have one of the new MacBook Pro models, 15.4", 2.4 GHz, 4 GB Ram, 250 GB hard drive, and an NVIDIA GeForce 9600M GT with 256 MB VRAM.
    I have just purchased a 32" Full HD 1080P HDTV/monitor from Vizio (the product's URL is http://www.vizio.com/product.aspx?id=2710&pid=1506) and was wondering if anyone could tell me what the best type of adapter I'd need from Apple to connect this to my MacBook Pro?
    Thanks!
    null

    Suggest that you do a forum search. There are several postings listing items that you need to connect your MBP to a TV. Also, check the manual that came w/your MBP.

  • Hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

    hello. i have a musical keyboard which is yamaha psr e433 and i want to connect it to my macbook pro. please help me give the name of the connector so i can use it for my band. thank you. your help is much appreciated.

Maybe you are looking for

  • Unable to Invoke a BPEL webservice from a java client

    Hi , We have developed (using Jdeveloper 10.1.3.1.0) a BPEL Process which invoke a PL/SQL procedure. This BPEL process is deployed on the Oracle SOA Suite server 10.1.3.1.0. Out third pary vendor is trying to invoke this BPEL webservice from there ne

  • Check the G/L account  in overall limit of  Purchase order - ME22

    Hi I should check the G/L account  in overall limit of  Purchase order ( modify - transaction ME22 ) Someone knows an exit or badi in witch i may check this ? There is an enhancement that i can work on this information? Thank you

  • How to validate for 2 decimal places

    How can I put a check while inserting into a number(5,2) field that user has entered only 2 decimal places. Right now if the user inserts records like 23.5456 it gets inserted as 23.56 . I want these type of records to error out. Is there an easy way

  • Reports in BEx

    Hi all, After we loaded data from R/3-SIS, we can run the S001 reports. However, we cannot generate the reports with time period, such as fiscal year/calendar month. We drag & drop 'fiscal year/calender month to the 'free CHAR' or Row and ran it but

  • Can we integrate third party tool with solution manager

    Can we integrate third party toll with solution manager , If it is possible what API's we have?