Connecting BI to Portal

Dear all,
I am configuring the connection between Portal and BI.
My system is all in one, means BI and Portal is in the same SID.
(NW 7.0, BI -Java included).
I follow the step in the documentation of report RSPOR_SETUP
I have following doubts
1. Why when I run this RSPOR_SETUP report, the system display the message "No vendor specified", what does this mean?>
2. In step 8 of the documentation, it says
Execute the following steps to configure user management in the portal.
1. Log on to the portal.
2. Start the iView System Administration -> System Configuration -> Configuration for User Management.
3. Choose tab page Security Settings.
4. Under SAP Reference System, enter the system alias of the BW system (see Creating BI Systems in the Portal ). The default system alias of the BI system has to be entered.
Only one system can be specified as the SAP reference system. The SAP reference system cannot be the BI system. However, as it is not the BI system, the technical user name of the BI system has to be identical to the technical user name of the SAP reference system.
5. Save your entries.
However, I could not find the "Configuration for User Management" menu step in System configuration.
Please help.
Giang

Yes, I refer exactly to this document and I got stuck at step 8.
I couldn't find the menu:
Configuration for User Management.
3.Choose tab page Security Settings.
4.Under SAP Reference System, enter the system alias of the BW system (see Creating BI Systems in the Portal). The default system alias of the BI system has to be entered.
5.
Only one system can be specified as the SAP reference system. The SAP reference system cannot be the BI system. However, as it is not the BI system, the technical user name of the BI system has to be identical to the technical user name of the SAP reference system.
6.
Save your entries.
Giang

Similar Messages

Connection Pooling in Portal Environment..

Hi...currently we are using Portal R2 9.0.2.0.1..
but the portal is slow...
My question is..
How can we implement Connection Pooling in Portal..
Because the Login Port (7777) and the Portal Home is different (7778)...so, how can we get the Login and Logout....
Can anybody help?

Hi there
If you choosen webcache while installation then it will in installed for you.
You can varify it via 9iAS Oracle Enterprise Manager.
If not install it and configure it.
Samir.

Cannot connect to new portal installation. PLEASE HELP!!!

EP6 on MS SQL with J2EE 6.2
When I connect with my browser to http://<fqn>:50000/irj, I receive the following:
Service Unavailable 503!
javax.servlet.UnavailableException: Initialization of Dispatcher failed
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:370)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.initDispatcher(Dispatcher.java:212)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.access$400(Dispatcher.java:40)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:447)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
     at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:833)
     at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:672)
     at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:314)
     at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
     at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1288)
     at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
     at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
     at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
J2EE has been patched up to 4/11/05. It is the cluster installation, but installed on a single Win2003 server only, which also hosts SQL Server. SAP Support has verified the portal installation, but has yet to find the problem.
http://<fqn>:50000 displays the J2EE documentation and all the example apps work. I can telnet to <fqn> 50008 successfully. I can open the J2EE Administrator at 50004 with Administrator user blank password.
Not sure where to go from here. Any and all help is greatly appreciated.

MS Windows Server 2003, Version 5.2, Build 3790
MS SQL Server, Version 8.00.760
Java version 1.3.1_12
SAP J2EE Engine 6.2, PL 31
SAP EP 6.0, SP 1, Patch 2
This is a new installion. We have yet to connect to the portal. The
error is encountered when trying to do so at the address
http://<FQN>:50000/irj.
Here is the latest console log 2005_4_13_at_16_54_55_output.log
[OS: Windows XP] [VM vendor: Sun Microsystems Inc.] [VM version:
1.3.1_12-b03] [VM type:Java HotSpot(TM) Client VM]
SAP J2EE Engine Version 6.20 PatchLevel 92173.20 is starting...
Loading: LogManager ...
Loading: R3StartupManager ...
Loading: ThreadManager ...
Loading: TimeoutManager ...
Loading: MemoryManager ...
Loading: PoolManager ...
Loading: PolicyManager ...
Loading: ConnectionsManipulator ...
Loading: IpVerificationManager ...
Loading: ClusterManager ...
Loading: ClassLoaderManager ...
Loading: PortsManager ...
Loading: LockManager ...
Loading: ServiceManager ...
Loading core services:
Starting core service security ... done. (62 ms)
Starting core service p4 ... done. (
218 ms)
Starting core service monitor ... done. (188 ms)
Starting core service admin ... done. (250 ms)
Starting core service log ... done. (406 ms)
Core services loaded successfully.
Loading additionalservices:
Starting service httptunneling ... done. (31 ms)
Starting service jms ... done. (15 ms)
Starting service telnet ... done. (16 ms)
Starting service shell ... done. (78 ms)
Starting service http ... done.
(63 ms)
Additional services loaded successfully.
SAP J2EE Engine Version 6.20 PatchLevel 92173.20 is running!
PatchLevel 92173.20 April 11, 2005 14:43 GMT
Login :Element 1459975381 joined.    Wed Apr 13 16:55:33 PDT 2005

J2EE_Admin Unable to Add iView Permissions (Connecting BEx and Portal)

Hi guys,
I'm trying to set up a connection between BEx Web and Portal in a Netweaver 2004s environment.
Following notes 917950, I have made the configuration using Template Installer and RSPOR_SETUP.
Perhaps unsurprisingly, there are some issues.
Diagnostics & Support Desktop Tool (note 937697) shows 6 red lights:
1. BI iView Permissions
2. BI Mastersystem
3. BI Portal System Permissions
4. URLs Prefixes Customized on Both J2EE and ABAP Side
5. User Mapping of User DDIC
6. WebAS ABAP Certificate and Login Modules Configuration
Here, let's just look at
1. BI iView permissions.
<b>Error: </b>
The BI Report-Report Interface iView does not have the necessary permissions for being called directly.
My question is
Why can't the J2EE_Admin user do the following fix (Note 983683)?
1) In the portal, follow the path
"Content Administration -> Portal Content"
"Portal Content -> Content Provided by SAP -> Platform Add Ons ->
"Business Intelligence -> iViews -> BEx Launcher (transactions for RRI)"
(pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.rritransaction).
2) From the context menu for this entry, choose "Open" -> "Permissions".
3) "Search" for the "User Group" (Caution: not the "role") "Everyone" and add this to the list of assigned authorizations.
Set the value "None" in the selection field of the "Administrator" column and set the indicator "User". Save your changes.
The "ADD" button is not clickable!! Is it because the J2EE_ADMIN user is not authorized to add permissions?
I hope the experts here can provide some light into the situation. Points will be awarded for helpful answers. Thank you!!
Regards,
SJ

2. BI Mastersystem
it depends on the type of error, see the hint given by the disgnostics tool, if it is sothing to do with BW system alias, so you have to connect to your portal and in system configuration->systemlandscape-> right click on SAP_BW then choose system alias and add the one proposed earlier in the diagnostics tool
3. BI Portal System Permissions
add group everyone on you SAP_BW system on systemlandscape
4. URLs Prefixes Customized on Both J2EE and ABAP Side
the one declared in the portal should be the same as the one in RSPOR_T_PORTAL table. you can modify this table to include the domain name of your URL
5. User Mapping of User DDIC
open your java admin consol (http://server....:5sid00 and then click on user administration, choose ddic the in the mapping tabulation click on modify the enter j2ee_admin as a user for the mapping, it should solve this point, don't forget to save.
6. WebAS ABAP Certificate and Login Modules Configuration
for this one you have to give the error text so i can help.
if it helps give points.
Regards.
Lakhdar Mourad

Open Service Connection to Enterprise Portal system from Solution Manager

Hi All,
We are getting below error, when we tried to Enable/Open Service Connection ( DSWP -> Solution Landscape ->Service Connection) to Enterprise Portal system.
Here we selected the row Connection -> R/3 support and Connection tab -> open/change connection and clicked on SUBMIT. The we got below short dump.
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_WD_CONTEXT
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_WD_CONTEXT' was raised, but it was not caught anywhere along the call hierarchy.
    Since exceptions represent error situations and this error was not adequately responded to, the running ABAP program
     'CL_WDR_CONTEXT_NODE===========CP' has to be
    terminated.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis:
    An exception occurred which is explained in detail below.
    The exception, which is assigned to class 'CX_WD_CONTEXT', was not caught and
    therefore caused a runtime error.
    The reason for the exception is:
    The node does not contain any elements. COMPONENTCONTROLLER.1.SYSTEMS.1.CLIENTS
How to correct the error:
    If the error occures in a non-modified SAP program, you may be able to find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following keywords:
    "UNCAUGHT_EXCEPTION" "CX_WD_CONTEXT"
    "CL_WDR_CONTEXT_NODE===========CP" or "CL_WDR_CONTEXT_NODE===========CM00R"
    "_RAISE_ELEMENT_NOT_FOUND"
SMSY configuration ( logical component assignmnet) is alredy done. Is it required to do any other settings. SMD ( Solution Manager Diagnostics ) settings are not done. Is this required?
We are able to enable/open Service Connection open to ABAP system . Only for Java system we are getting error.
Please help me on this.
Thanks..
Preethish

Hi,
note 1081895 should solve this. Otherwise please create a ticket.
Regards
Andreas

How to connect R3 to Portal

Hi all,
Can any one tell me how to connect R3 to Portal step by step ?
Please... I am new to Portal environment..
Regards,
Murugan Arumugam.

Connecting To R/3 From Portal
Configuring EP for connecting to SAP R/3
Connecting SAP systems to Enterprise portal with SSO.
Regards
Krishna.

Delete connection information from portal

i have successfully imported the portal pages and portlets.now i am not able to edit the connection information as it is disabled in the connection information for my old connection.
how can i delete or edit connection information from portal
thanks
mish

Check out this thread. Something similar would do for a KM Repository as well.
<a href="https://forums.sdn.sap.com/click.jspa?searchID=2812737&messageID=608126">https://forums.sdn.sap.com/click.jspa?searchID=2812737&messageID=608126</a>

Could not connect to my portal application on the server

Hi,
I really need someone help me on the following problem.
I have developed a portal application on my test server (Window 2000 server) using Oracle 817 EE and Oracle 9iAs 10221. It had wroked fine for months until yesterday. Yesterday, I treid to conect to my portal application like before using url(e.g.http://myserver/pls/portal30), but I could not connect to my portal application. The error message that I got from the browser(IE5) is:
The page cannot be displayed
Cannot find server or DNS Error
Internet Explorer
But, I think that I can connect to the OracleiSuiteHttpServer by using the following url:
http://myserver/
becasue I can open the httpserver page by using the above url.
Your help would be higly appreciated!
Jeffrey

Version: 11gR1
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
PL/SQL Release 11.1.0.7.0 - Production
CORE 11.1.0.7.0 Production
TNS for Linux: Version 11.1.0.7.0 - Production
NLSRTL Version 11.1.0.7.0 - Production
There is not problem in the tnsnames configuration. Because if I login as oracle then I can connect to the db using connectring. Developers are not able to connect from the server(Developer have unix account because they are loading data from sql*loader).

Problem in connecting bw to portal

Hi,
I am connecting bw to portal with SSO thru logon ticket.I have created system in portal SLD . I want to ask..Is there any rfc connection I have to make in bw server for getting BW data in portal?
regards
Amit

Hi Amit,
You can see full fledged demo on this at
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=120
Hope that will help.
Regards,
Piyush
ps: please mark all useful answers.

Partner connect to customer portal via saprouters

Hi,
I'm looking for a similar way to connect to a portal via URL as the SAPGUI has to connect to an ABAP system, much in the same way SAP does to customers.
I have control on the entries in saprouttab (I think , but don't know how to handle the URL. Can I use a saprout string in a URL? Any other way? How is this technically solved at SAP ("on the inside")? Is it possible to do the same between partner/customer saprouters?
Both saprouters are connected to SAP, both use SNC.
Regards,
Gørril Vollen

As far as i know is not possible... you'll need a VPN connection or similar.
Regards
Juan

Enable https connection to the portal

Dear all,
i tried to implement an https connection to my portal environment but i received this error:
"IisProxy.dll: 500 Internal Server Error
ProxyWorker(): IOException: SapSSLStart() failed: -30 (SSSLERR_SERVER_CERT_MISMATCH)
at SapConnection.cpp:719".
The connection is not made direct to the portal application enviroment on the port 50001 but through a reverse proxy.
Is there someone that can help to undesrtstand this error message ot could indicate how to find a guide to implement the https?
Regards

First, did you apply note 715303 for IIS 6.0?
Second, docs for IISProxy and J2EE are not the best in the world. I have docs from 6.20 that I still use today. I just scanned them and have them as jpg's in a 6 meg zip file. Go to my business card and e-mail me your e-mail address and I will send the docs.

Connect the current portal session to another user

We have to do application management for portal users. Often it's necessary to have the same view as the customer. So administrators need a portlet for specifying the user credentials and connecting the current portal session to this user. It's not possible to ask every user for his password.Has anybody created such a portlet?Is it possible to do this? Can I use the EDK or do I need the plumtreeserver - DLL? Which class do I need? Thanks for any help

Thank you - It works! Now I have an IPTSession-Object for the given user. But how can I set this to the current portal instance? I get only new sessions but I didn't find any way to change the current session.

Connect EJB in portal

Hi All,
       I am trying to connect EJB in portal,when i try to connect the application i got the following error,
       java.lang.Exception: Error instantiating EJBjava.lang.ClassCastException:
       <package>.<EJBNAME>.<EJB NAME>Home0#
Your ideas regarding this topic is expected.
Thanks & Regards,
Vinoth

Hi Vinoth
Have you used
<property name="PrivateSharingReference" value="SAPJ2EE::sap.com/EARProjectName"/>
in your portalapp.xml.
Also try to print Obj.getClass().getName() for InitialContext context = new InitialContext();
Object Obj = context.lookup("MY_JNDI");
Thanks & Regards
Shilpa

How can I connect to the portal homepage on a 9i Database

I successfully installed Oracle 9iAS on a MS Windows NT machine
and configured the Portal Server on an Oracle 9i Database on
another machine (Windows 2000).
But when I try to call the portal homepage (portal30.home), I
get the following error: "The preference path does not exist:
Oracle.Portal.Page (WWC-51000)".
I can successfully call the .../admin_/gateway.htm page and
connect over there to the database.
The shared_pool_size parameter is large enough (92274688).
I installed the portal server manually, without the GUI, because
the connection to the database during the installation was only
enabled as SYSDBA or SYSOPER.
How can I also get connected to portal homepage?
Thanks,
Reinaldo

can i connect my roku box to the 2nd AE's ethernet port?
Yes
will it make any difference? (as opposed to the roku box, used for netflix, picking up it's signal wirelessly).
Probably not, since the AirPort Express is picking up its signal via wireless.
The same signal just appears at the Ethernet port. If anything, the signal at the Ethernet port will have a bit less bandwidth than the wireless signal since the Express must convert from wireless to Ethernet...and you always lose something in the conversion process.
Normally, you would use the Ethernet port if a device did not have wireless capability.

Connection with html portal to r/3 4.6c

HI experts
I am new to SAP.
I have a problem. Can any one help me how to call FM in ESS portal. We use htmls through ITS server to connect to Sap R/3 4.6c.
Can you help me how to pass data from portal screen to r/3.
How to call function module from portal? in ESS, if an employee hits on submit button then we have to call Function module with necessary data passing from html to function module.
what coding do we write for pop up window when some press submit button.
I am in need of it urgently.

Hi Klaus,
sorry that the answer is so late!
You are right, different ports make life much easier, but i solved the problem over the ITS Path:
"/scripts/wgate/../../<instance>"
Now the connect over the ITS to the R/3 System works
Thanks for your help
Best regards,
Mario

Creating a RFC application(SAP R/3) that connects to web portal.

Hello Everyone,
I need to create a rfc application that should connect to portal& fetch some data in some table according to some input parameters provided at runtime & display the data in TABLEVIEW control.
Anyone can guide me on this i:e- how to go about it. What things i should know or should be aware of before creating this application. Any PDF documents , any help material, any guidance about the same will be of great help.
Thanks,
Prasad
[email protected]

Hi Prasad
I guess you are trying to develop an application which will run in ABAP stack and will connect to JAVA stack and retrieve some data from there(i.e from java)-correct me if I am wrong. if this is exactly what you want to do then I must say sorry since establishing this route of communicaton is not known to me. But i can suggest you a workaround where you create your application in java so that in runs Java stack picks up data from portal(i.e. WAS database) make call to some RFC from ABAP to persist that data in some ABAP table.
Let me know if it makes sense to you.
Cheers
Sudip

Connecting BI to Portal

Similar Messages

Maybe you are looking for