Connecting bluetooth accessory to multiple devices
Bought the XGPS150 to work with my wi-fi only iPad2. It would have been a bonus if it could talk to two iPad's/devices at the same time, but it cannot.
Multiple devices can pair with it, but it can only communicate with one iPad/Phone/Touch at a time.
I can understand this with accessories like headphones or keyboards (maybe). But with a GPS device that mainly pushes data instead of receives data it would be nice to send to multiple devices at the same time.
Is this a limitation with the vendor? With the Bluetooth 2.0 specification? Fixed in Bluetooth 3.0 or still a limitation?
Thanks!
Bluetooth uses a master/slave protocol. The iPad is the master. Headphones, XGPS, keyboards are slaves. All communication is between master and slave. A master can have multiple slaves but a slave can have only one master.
Similar Messages
-
How to connect Apple TV to multiple devices
I have a Pioneer HDTV connected to a Sony VAIO computer through HDMI which in turn is connected to a Sony 5.1 digital receiver through a TOSLINK cable. I have recently bought Apple TV and now need to connect it so that the TV, computer and receiver all all to each other. The problem I have is that the TV has only HDMI out and the receiver has only one digital optical out. What is the best way to connect the Apple TV to these devices?
Your Tv is unlikely to have HDMI out.
It may have HDMI in, question is how many inputs.
The only official way to connect AppleTV 2 to your TV is via HDMI.
You can send optical audio to the Sony reciever simultaneously.
AC -
Not able to connect bluetooth accessory
Since I connected my iPhone 4S via Bluetooth with a Fiat 500 Blue&Me, I'm not able to get a bluetoothconnection with my Pebble smartwatch any more.
Any idea to solve this problem?Hello sturmgraz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
iOS: Troubleshooting car stereo connections
http://support.apple.com/kb/TS3581
iOS: Third-party Bluetooth accessories
http://support.apple.com/kb/ht1664
Best of luck,
Mario -
Connect iPad 2 to multiple devices simultaneously
Can I charge my iPad 2 while it is connected to accessories such as an Apple display adapter?
Yes, if you are referring to the Apple Digital AV Adapter.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/fd5cc5b6614eb276e4 28ee33009ae0fd.jpg -
Air Ios BlueTooth(Multiple Device)
Hi guys,
Is there any AIR to IOS application, that connect to multiple IOS device uisng bluetooth(not peer-peer)...a single device must be able to connect multiple device..is there any example or tutorials for this?...can any one help me out..Thanks in advance...Hi Pradeep,
I'd recommend posting on the Flex and Flash Builder forums for this versus Proto.
I'm not sure if Flash Builder would support it, given iOS and flash compatibility restrictions, but you should confirm with other developers
http://forums.adobe.com/community/flash_builder/using_flash_builder
http://forums.adobe.com/community/flex
I also found this which might be helpful for you
http://mobile.tutsplus.com/tutorials/iphone/bluetooth-connectivity-with-gamekit/
-Dave -
I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive. Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives? So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?
You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs. (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.) This will prevent you from ending up with merged data. You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l. -
Our home network has multiple devices connected by iCloud: 2 iMacs, 2 iPhone 4s, 1 MacPro Laptop, and 1 iPad 2. When using Calendar, all the events were
duplicated on my husbands iMac. On his computer, under Calendar accounts, I had included iCloud and also my iCloud ID. I thought that because I had two accounts listed that were connected to iCloud, that might be the cause of the duplication. When I deleted ithe calendars from one of the accounts, it resulted
in deleting all of the events on all of our network devices!
I have since entered some new events into Calendar from my iMac and from my iPhone. These appear correctly on all devices except my husband's iMac where they are again all duplicated.
I have two questions: 1) How can I eliminate the duplicated events on my husband's computer and 2) How do I retrieve the old wiped out Calendar events from
Time Capsule. I don't know how to find Calendar in the Time Capsule. If I find the Calendar information in Time Capsule, how do I transfer it to my current Calendars?
I was obtaining phone help from one of the Apple techs at Apple Support, but our call was disconnected part way through. Didn't know how to reconnect with the tech.
Thanks for any help.The warranty entitles you to complimentary phone support for the first 90 days of ownership.
-
Solved. Travel router WTR54GS sharing one wireless hotspot connection with multiple devices
Hi, Passing on info I've learned.
The manual for the WTR54GS mentions being able to "...use multiple devices on a single hotspot account in a coffee shop or airport lounge...". See my original posting, "How to set up a wireless private bubble at paid hotspot? WTR54GS?", which ended in a dead end. I subsequently had a Linksys live chat session and the representative provided the solution. Perhaps worthy to be included in the Wireless FAQ?
Situation: you have access to a paid hotspot (hotel room, meeting room, etc.) and you want to share the connection with several devices, also wirelessly.
Solution: the WTR54GS can accept an incoming Internet connection wirelessely and re-broadcast that connection to form your own private bubble or network. (Note the WTR54GS can also accept an incoming Internet connection via Ethernet cable).
Linksys Live Chat pointed me to these web pages.
Go to the Linksys Easy Answers page: For a schematic of the concept of "associating the travel router to a hotspot (wirelessly)" search for Easy Answer ID# 4831
URL for above is http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4831&p_created=1167963305&p_sid=GmLnq3Zi&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NjImcF9wcm9kcz0wJnBfY2F0cz0xNzIxLDE3MjMmcF9wdj0mcF9jdj0yLjE3MjMmcF9zY2ZfbGFuZz0xJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9V1RSNTRHUw**&p_li=&p_topview=1
There is a "configuration simulator" that shows the options for selecting a wired or wireless incoming Internet Type.
http://linksys.com/ui/files/WTR54GS/1.0_15/Setup-Wireless.htm
The hotspot has to be "open", that is transmitting an SSID and with no WEP or WPA key. It may have a log-in page accessible via a web browser, this is okay as this will be passed onto the connected device.
My personal application is to be able to connect a PDA that has a 801.2b wifi to a 801.2g wireless network. I haven't tried it but if this works, it will extend the useful life of my PDA in a "g" environment. Will report back once I find a "g" only environment. Comments?
-Tony
Dang, the long URL is making for a really wide message. Is there a fix?
Message Edited by tony_vancouver on 02-28-2008 02:08 PM
Message Edited by tony_vancouver on 02-28-2008 02:12 PMThere are two conditions which must be met in order to use your WTR54GS to "extend" an incoming, wireless internet connection:
The incoming connection must be unsecured. You have already covered this point;
The security settings on your WTR54GS can only be set to "WEP," or to "Disabled." If you choose "WEP," then you can use either a 40/64-bit, or a 128-bit key.
If those two conditions have been met, then it works fine -- says the guy who is sharing one paid internet conneciton in his hotel amongst three devices, and with co-workers in nearby rooms. -
Multiple Devices Keep Losing Wireless Connection t...
We have multiple kids and hence multiple devices, daily, different devices are able to connect and others aren't. The only solution is to reset the homehub and they can all then connect, but it is only a matter of time before connectivity is lost. Happens on all device types, phone, TV, printer etc.
Anyone have similar issues and is there a resolution?What Hub are you using ?
If an HH4 A or an HH5 A it is best to have different SSIDs for 2.4 and 5 GHz signals. -
Multiple devices cannot connect
I can not connect multiple devices (iphone, windows laptop) wirelessly. I have an airport extreme, Imac operating on SnowLeopard. My Ipad and macpro connects fine wirelessly. This is a new problem. Worked fine for 6 months. I have rebooted both the cable modem and the airport express router. For some reason my password is being rejected or saying unable to connect. Again, this is a new problem.
Check to make sure that your Time Capsule is configured as a router....not a bridge....to allow both DHCP and NAT services.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the next box that appears
Click the Network tab at the top of the next window
Make sure that the setting for Router Mode is set to DHCP and NAT
Click Update to save the settings and allow 30 seconds for the Time Capsule to restart
Then....very important....power off all devices on the network in any order you want
Wait a few minutes
Start the modem first, and let it run a full minute by itself
Start the Time Capsule next, the same way
Keep starting devices one at a time until the entire network is back up -
Why can't I connect to samsung or htc device via Bluetooth?
Why can't I connect to samsung or htc device via Bluetooth? or can't copy any picture or song from my laptop to Iphone 5?
Because this has never been a feature of iphone/ipad/ipod touch.
Ipod touch/iphone/ipad support bluetooth for handsfree telephone devices, stereo speakers/headsets, some keyboards, some peer-to-peer apps form the app store, and internet tethering where provided by the carrrier.
Otherwise, they will not connect to another phone/device/computer. -
On my Macbook Pro, whenever I turn Bluetooth on, it immediately connects to a powered-down device. If I click "Disconnect", nothing happens.
When I turn the device back on, I am unable to re-pair with the actual device.
This image shows Bluetooth connecting to the powered-down device (and, again, clicking "Disconnect" does nothing):
This image shows Bluetooth unable to connect after powering the device back on:I'm also seeing the following issues in Console:
-
How can I connect Bluetooth in iPad retina with non apple devices ?
How can I connect Bluetooth in iPad retina with non apple devices ?
What devices?
The iPad can only pair with earphones, speakers and keyboards.
It cannot directly pair with other phones or computers for file transfer or other operations.
Most Bluetooth devices will have a user guide to connect them to other devices. follow that to start the process.
From the iPad side, its just a matter of going inot Settings->BlueTooth turning it on, and searching for the device to pair. -
8130 Bluetooth Connect Option Missing for Some Devices
I cannot connect to some bluetooth devices on my Blackberry 8130. Most devices I pair with have a connect option in the bluetooth menu but some don't, even though they have been successfully paired. I have a specific device, a Holux H-1200 GPS that I used OK in the past with my 8130 but now refuses to connect and I cannot manually conect since there is no Connect Option for this particular device in the list of paired devices. I have deleted and rediscovered the device multipe times. When I pair successfully the properties show the Services SPP slave listed. I have tried to enable and disable Trused and Encryption but nothing helps. The Connect Option is present for all paired devices except 2 or 3 on my BB. My bluetooth options are set at Discoverable yes, allow outgoing calls yes, address book transfer all entries, security level high, and all services are check marked. I am with Verizon and my phone software level is 4.5.0.56.
In my own personal experience I have found that sometimes elements of the page (such as the Get Sample or Buy buttons) don't load in or load in incorrectly. Most of the time I've found that simply going to another page then back to the previous page fixes the issue or, like you have done, browsing from another devices shows the page just fine.
-
I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?
Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.
Maybe you are looking for
-
How to Send Custom Purchase Order Report in PDF format to Supplier through email
Hi, Currently whenever a PO is approved in PO form if Email Option is enabled it is sending the standard report output to the supplier, we need to replace the custom designed report instead of the standard report. How to achieve this, is there any ne
-
I also want to add that I've found the updates to logic pro 9.1.2 thru 9.1.7. and when I download them they tell me they are either not needed or don't seem to actually update anything. Someone was saying that Logic Studio isn't a fan of Lion and I
-
How to display the values in the form based on another form option?
Hi, I have two forms. Based on form 1 option the form 2 should display. Form 2 values are stored in a separate table consists of step_id and step_name For example: In a Procedure there are multiple steps(step1, step2... step n). If procedure 1 is cho
-
The speakers in my car work great over iphone4s for telephone calls but the car doesn't seem to recognize music on the same iphone. What setting should I check?
-
Change the default row maximum in an Analysis report?
I'm using OBIEE 11.1.1.3 (and testing this on 11.1.1.5) and am curious how to change this setting: On all our Analysis reports we can view Rows 1 - 25 in the Results tab for the report. I want to change this so I can see more than 25 rows as my defau