Connecting by cable to AEBS

On my return from holiday I fired up the AEBS and then my PB which eventually connected wirelessly. However, my wife's iMac, which is connected via cable to the AEBS (v 5.7), can no longer connect to the internet. Nor, upon expirementation, can my PB. So, I can connect wirelessly, but not via cable. Running the diagnostics with the ethernet cable connected gives an amber on network settings and it does not seem to pick up the assigned IP address that it does with Airport switched on. Manually assigning an IP address gives a green light but then I get a message saying "Network settings changed by another application" and I get an odd IP address assigned. I have done a hard reset of the the AEBS and ractory settings load, all to no avail. I have also tried different ethernet cables. Is the ethernet connection on the AEBS faulty?
Any help appreciated, thanks

I don't have any answers but I have the exact same question, only for a DSL Modem. We just got a DSL modem and it works on my mom's Sony PC but not on my Mac.
However- I HAVE used this Mac with a number of different high-speed ethernet connections in net cafes and so on using the same port, so I am 100% certain that the ethernet connection works.
I've tried everything you have except for factory settings load... I wanted to check here first.
The ISP told me to call Mac, but since I already know that the ethernet connection works, I cannot imagine what the problem is. Continually restarting both machines is not doing any good.
If I find a solution I'll be sure to post here.

Similar Messages

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

My Samsung TV has a USB port. I connect the cable from the iPad to the TV to view a video on the TV. The video shows on the iPad but on the TV I can only get the pictures and music available on the iPad. Why is this and can I show videos from the IPad on

My Samsung TV has a USB port. When I connect the cable from the iPad to the TV I can only show Pictures and Music. Why does the videos not appear and how can I show videos on the TV.

This article should help you with that:
http://www.ehow.com/how_7211806_display-iphone-tv.html
Take care

Cannot connect via cable on Windows XP home SP2

Good Afternoon,
Maybe you can assist me here.
I cannot connect via cable my N91 (4 gb hdd) to Windows XP Home SP2. I can however connect via cable to my work computer which has the OS Windows XP Pro sp2.
In both cases both OS's are up to date, I have updated the phone OS to v2.10.013 RM-43. I am using the most up to date drivers that is available on nokia.com as well as the current ed of PC Suite (6.82.22.0)
The following is the steps I followed in both cases starting with XP Pro
1. Installed Drivers
2. Installed PC Suite
3. When prompted by PC Suite connected Phone via cable to Computer, further install steps were required. No reboot required. PC Suite then picked up phone
XP Home
Followed steps 1 + 2 in the same order
3. Connected N91 to XP Home computer, after driver install activity rebooted computer as requested. Disconnected N91 On reboot to desktop, in PC Suite I clicked on Get connected. Select Cable connection when prompted attached cable to computer and then to phone, on the phone select PC Suite. .
At this point I get the hour glass and nothing happens, Next is ghosted. It has been like this for 20 mins.
I have uninstalled both the drivers and the software. For some reason the updater can connect to the phone.
Can you advise on what I can do.

Hi
Sounds lik ethe PC is having issues seeing it. Try this
/discussions/board/message?board.id=pcsuite&message.id=11480
Try this first:
1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
3. Select "PC Connectivity Solution", click "Change" and then "Repair".
4. After Repair, restart PC
music

My Iphone 4s is not being recognized by itunes at all. There is no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

My Ihone 4s is not being recognized by Itunes.There seems to be no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

Kernel Panic when I connect USB cable to use Rane Serato SL3

Connect USB cable to use Rane Serato SL3 causes the following kernel panic. Used cable is an 5 meter USB-2 cable. This is 100% reproducable.
Yes yes I know Rane does not officially support Mavericks yet however if I use another (shorter) USB-2 cable with the Rane Serato SL3 it's no problem. I also have an older Rane Serato SL1 and this device works (USB-1) perfect with the same 5 meter USB-2 cable and the same short USB-2 cable.
I've taken the liberty to ask Rane what's going on and no succes there. They just don't seem to know.
So you smart people over here, what's going on?
Here is the Kernel Panic:
Anonymous UUID:       944C81E9-22DD-96FF-FD1A-553E9CAD6B34
Sat Nov 2 20:34:06 2013
panic(cpu 4 caller 0xffffff800b8dc19e): Kernel trap at 0xffffff7f8debe166, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000000e538000, CR4: 0x00000000000606e0
RAX: 0x00000000e0000200, RBX: 0xffffff8025405000, RCX: 0xffffff800bf024b0, RDX: 0xffffff802d0add08
RSP: 0xffffff80fcbc3d80, RBP: 0xffffff80fcbc3da0, RSI: 0x00000000000a0014, RDI: 0x0000000000000000
R8: 0x0000000000000051, R9: 0xffffff800be01910, R10: 0x00000000000003ff, R11: 0xffffffffffffffff
R12: 0xffffff801ecc1800, R13: 0xffffff802d0add00, R14: 0xffffff8025405000, R15: 0xffffff7f8debe200
RFL: 0x0000000000010246, RIP: 0xffffff7f8debe166, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x4
Backtrace (CPU 4), Frame : Return Address
0xffffff80fcbc3a10 : 0xffffff800b822f69
0xffffff80fcbc3a90 : 0xffffff800b8dc19e
0xffffff80fcbc3c60 : 0xffffff800b8f3606
0xffffff80fcbc3c80 : 0xffffff7f8debe166
0xffffff80fcbc3da0 : 0xffffff7f8debee0f
0xffffff80fcbc3dc0 : 0xffffff7f8c13aadc
0xffffff80fcbc3df0 : 0xffffff7f8debe2a9
0xffffff80fcbc3e00 : 0xffffff7f8c13aa20
0xffffff80fcbc3e30 : 0xffffff7f8c139634
0xffffff80fcbc3e60 : 0xffffff7f8debbaf4
0xffffff80fcbc3ea0 : 0xffffff800bcae4b3
0xffffff80fcbc3f00 : 0xffffff7f8debaa62
0xffffff80fcbc3f20 : 0xffffff800b84a15a
0xffffff80fcbc3fb0 : 0xffffff800b8d6aa7
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(1.9.4f11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@0 xffffff7f8c135000->0xffffff7f8c163fff
            dependency: com.apple.kext.OSvKernDSPLib(1.14)[744516ED-C05D-340F-9867-F5E89B2E8BE5]@0xffff ff7f8c124000
         com.rane.driver.sl3.10.6(1.3.3f1)[46AEB5AC-AD52-3F5C-9927-59ABE444B435]@0xfffff f7f8deba000->0xffffff7f8dec5fff
            dependency: com.apple.iokit.IOAudioFamily(1.9.4fc11)[5077FB4F-0903-3D79-8280-5B2341E93BF3]@ 0xffffff7f8c135000
            dependency: com.apple.iokit.IOUSBFamily(650.4.4)[972D3024-AF9C-3E09-A9EC-D9AB2A559B38]@0xff ffff7f8c19a000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x000000000b600000
Kernel text base: 0xffffff800b800000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 431507508429846
last loaded kext at 426057833798866: com.sophos.kext.sav          8.0.14 (addr 0xffffff7f8dec6000, size 24576)
last unloaded kext at 426034845418472: com.sophos.kext.sav          8.0.14 (addr 0xffffff7f8dec6000, size 20480)
loaded kexts:
com.sophos.kext.sav          8.0.14
com.rane.driver.sl3.10.6          1.3.3f1
com.regularrateandrhythm.driver.RowmoteIREmu          1.0
com.eltima.ElmediaPlayer.kext          1.58
com.Cycling74.driver.Soundflower          1.6.6
com.serato.usb.kext          2.3.0
net.osculator.driver.OSCulatorIOKit          2.1
com.squirrels.airparrot.framebuffer          3
com.squirrels.driver.AirParrotSpeakers          1.7
at.obdev.nke.LittleSnitch          4050
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AGPM          100.14.11
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.kext.AMDFramebuffer          1.1.4
com.apple.driver.AppleHDA          2.5.2fc2
com.apple.driver.AppleMikeyDriver          2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.driver.AppleHWAccess          1
com.apple.AMDRadeonX3000          1.1.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleMuxControl          3.4.12
com.apple.driver.AppleIntelHD3000Graphics          8.1.8
com.apple.driver.AppleIntelSNBGraphicsFB          8.1.8
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.kext.AMD6000Controller          1.1.4
com.apple.driver.AppleLPC          1.7.0
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.driver.AppleThunderboltIP          1.0.10
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleIRController          325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.iokit.SCSITaskUserClient          3.6.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleSDXC          1.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.kext.triggers          1.0
com.apple.iokit.IOSurface          91
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.DspFuncLib          2.5.2fc2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAcceleratorFamily          98.7.1
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleGraphicsControl          3.4.12
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleHDAController          2.5.2fc2
com.apple.iokit.IOHDAFamily          2.5.2fc2
com.apple.driver.AppleSMC          3.1.6d1
com.apple.kext.AMDSupport          1.1.4
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.6.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.driver.AppleThunderboltNHI          1.9.2
com.apple.iokit.IOThunderboltFamily          2.8.5
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOEthernetAVBController          1.0.3b3
com.apple.driver.mDNSOffloadUserClient          1.0.1b4
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
com.apple.kec.pthread          1

Most likely, one of these is the culprit.
com.sophos.kext.sav          8.0.14
com.rane.driver.sl3.10.6          1.3.3f1
com.regularrateandrhythm.driver.RowmoteIREmu          1.0
com.eltima.ElmediaPlayer.kext          1.58
com.Cycling74.driver.Soundflower          1.6.6
com.serato.usb.kext          2.3.0
net.osculator.driver.OSCulatorIOKit          2.1
com.squirrels.airparrot.framebuffer          3
com.squirrels.driver.AirParrotSpeakers          1.7
at.obdev.nke.LittleSnitch          4050
Boot into safe mode (restart holding down SHIFT key). If no KP, then disable these, reenable one at time to determine which. If KP, then most likely hardware related. Run the Apple Hardware Test suite, extended tests at least twice, followed by Rember. See
OS X About kernel panics,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics,
How to troubleshoot a kernel panic, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Can't connect via cable, but wireless works.

iMac, Leopard, iTunes, all current. AppleTV only shows up when I disconnect my ethernet cable. At that point my Airport base station (older version) makes the connection. If I turn Airport off in the OS, still no go. I've tried multiple cables too. I've also tried my Macbook pro.
I obviously want the wired connection for greater speed and since the ATV is in the room right next to the computer it's no big deal to run a cable. I swear I had this all running correctly under Tiger, but now I'm starting to wonder if it had been wireless all along and I never realized it.
Help!

Hi,
I had the same problem and this worked for me -
Go to System Preferences/Sharing and enable "Internet Sharing" where it says "Share your connection from" choose Airport and where it says "To computers using" select the ethernet port that you've connected the cable from the ATV to on your computer.
Go to System Preferences/Security/Firewall and if you've selected the last option "Set access for specific services and applications" add iTunes to the list by clicking the + and navigating to it.
Regards

I have connected my ipad to my computer and logged into iTunes website. To restore my Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to resto

I have connected my ipad to my computer and logged into iTunes website. On my iPad to restore my my data Ipad I have chosen language, country then it asks you to connect with cable and log into iTunes, I have done that, but cannot find this other information I need to restore from the website. Can you help me please? the 2 replies, I thank you, but this has not helped with my problem.

Your post is somewhat confusing. To restore your iPad you use the iTunes application on your computer and connect your iPad. Select your iPad in the left column of iTunes on your computer and select General in the right column. You should find the restore choice there.

How to connect ethernet cable to rMBP?

Recently I've thought of getting a new router w/ ethernet cable, but the problem is that my retina MBP doesn't have a slot for the cable. Is there anything I can use to connect the cable to my computer?

Yes: http://store.apple.com/us/product/MD463ZM/A/thunderbolt-to-gigabit-ethernet-adap ter
Works great.

How to connect hdmi cable on hp g60 to sony bravia lcd?

how to connect hdmi cable on hp g60 to sony bravia lcd?

Hello sohagshahin,
It appears that your HDMI port is not working on the notebook. I will try to assist with this.
Have you verified that the port indeed does not work by trying other tv's or monitors? (try one of each if possible).
Have you tried other HDMI cables?
This document may also help you: Resolving HDMI Display and Sound Issues (Windows 7 and Vista).
Let me know how things go.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Connect fios cable to pc.

How do i connect fios cable to my pc and use the signal with Windows Media center. I have connected the fios cable directly to the back of my pc. (RF in) When I try to set up tv in Windows Media center it cannot find the tv signal. Is there another piece of hardware I need to use? I am also using an hp (external) tuner. Channels will change but no picture, just static screen.
Solved!
Go to Solution.

thisjustin wrote:
How do i connect fios cable to my pc and use the signal with Windows Media center. I have connected the fios cable directly to the back of my pc. (RF in) When I try to set up tv in Windows Media center it cannot find the tv signal. Is there another piece of hardware I need to use? I am also using an hp (external) tuner. Channels will change but no picture, just static screen.
the only way for you to plug a coax cable directly in is if you have a tv tuner card that has QAM 256 support.
a lot of cable cards don't, you may need to plug a STB in the middle of it for it to work
so wall coax to stb, stb coax to your PC.

Can I connect my cable box to my 2011 iMac

Can I connect my cable box to my 2011 iMac

If you are setting up to use Wi Fi connect the Ethernet cable to the cable box then to the router.
Some companies like Comcast have online manuals available online for instructions. Check your cable company's web site. The manuals should be available in PDF format.
Message was edited by Carolyn

TS1538 i cant connect my iphone to laptop. its nither charging nor connecting :( usb cable is okay .... can any one help ??

i cant connect my iphone to laptop. its nither charging nor connecting usb cable is okay .... can any one help ?? pls...

BOB we need you urgently
Perhaps Bob will see this thread, he is the professor in these cases.
You do not use a WEP password but wpa/wpa2 on router and equipment.
All equipment connects to WiFi, but for your iPad.
Even with all other equipment WiFi off, you cannot connect your iPad.
Your iPad connects to other WiFi nets correctly.
All resets etc done on iPad and Router.
Still I am not sure it is your router for sure, frustrating...
I want to test 2 other things:
1. in your iPad, set everything OFF in Settings/Cellular, turn off/then/on your WiFi, and see whether it will still not connect...
2. If that does not do it: disconnect the router as well as the modem from the power, for 15 seconds, then reconnect the modem, let it fully start, then reconnect the routet let it fully start, turn of your WiFi in iPad, then on, and see whether it will connect.

Port is down down if I connect the cable and its limited connectivity

Dear All,
I have 4506 with WS-X4648-RJ45V+E. If I connect the cable on one port it is showing down down and on PC it is limited connectivity.
Please suggest.
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSALK9-M), Version 03.02.00.XO RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 22-Sep-11 20:42 by prod_rel_team
Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
Image text-base: 0x100A12B4, data-base: 0x13F29B60
ROM: 15.0(1r)SG3
Jawa Revision 7, Winter Revision 0x0.0x3
DLD-03-4506 uptime is 10 weeks, 2 days, 2 hours, 47 minutes
System returned to ROM by power-on
Running default software
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
License Information for 'WS-X45-SUP7L-E'
License Level: lanbase Type: Permanent
Next reboot license Level: lanbase
cisco WS-C4506-E (MPC8572) processor (revision 4) with 2097152K/20480K bytes of memory.
Processor board ID SPE1625010J
MPC8572 CPU at 1.5GHz, Supervisor 7L-E
Last reset from PowerUp
2 Virtual Ethernet interfaces
244 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Thank You,
Abhisar.

Dear Leo,
TAC has suggested to upgrade IOS because of BUG.
https://tools.cisco.com/bugsearch/bug/CSCsv15915/?reffering_site=dumpcr
Thank You,
Abhisar.

Nokia N8 - Connect USB cable to device

My new nokia N8 is constantly coming up with the message "connect usb cable to device".
I'll click ok and 2 minutes later it will reappear.
When i connect it to a usb, it disappears but will then reappear when i unplug. I've tried updating software but none is available, and there is no programs running on the phone.
When i turn off and on i still get the same problem.
Anyone know of a solution before i throw it against the wall?

vvaino wrote:
Ok,
Have you tried the trick you can find from the phone's
manual; long press the on/off button (for 8-10 sec) until the
phone vibrates three times? With this, you don't lose any
of your information.
-vvaino
That's barely a trick
it just kills the power to the phone and is esentialy the same as using the on off switch
anyway as to the OP don't know
you could try resseting the device type *#7370# into the dialer,
this will restore the phone to an out of box stateand you will loose all of your settings
see if that helps

Connecting by cable to AEBS

Similar Messages

Maybe you are looking for