CONNECTING CME 8.6 WITH NORTAL DIGITAL PBX

hi,
How to integrate CME 8.6 with Nortal Digital PBX. What are the requirement to connect Nortal PBX to CME.

Hi Shaik,
In addition to the great tips from Adrian (+5 "A")
I thought the CME Inter-op guides might be helpful as well;
http://www.cisco.com/en/US/solutions/ns340/ns414/ns728/networking_solutions_products_genericcontent0900aecd805bd0ac.html
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

Similar Messages

What firewire will connect 27 inch IMac with Cannon GL2 digital camcorder

What firewire will connect 27 inch IMac with Cannon GL2 digital camcorder?

According to the Canon spec's a > 4 to 9 pin firewire cables is what you will need, provided that you have a slightly older 27" iMac that still has a FireWire 800 port.

Want to connect Audigy 2zs gamer with digital so

Ok I have the audigy 2zs gamer, and the gigaworks 750 7. surround sound.
I also have hdtv cable box with digital out, and optical digital out.
I have ps3 (obviously with blu-ray) and xbox 360, both of which have a optical digital out.
I want to be able to connect to these, but I guess the only inputs ( on pod, and on card) are analog only.
My question is. Is there any way to do this. I see a digital i/o box, but I don't think it's compatible. It says it is with the value model, but not the regular 2zs gamer one?
So do I have to buy a newer sound card, or can I use this one as is, or with the digital i/o box to make it work.
I don't care about having multiple connections, I can make do with having only connected at a time.
Thank You

I guess what can solve one of the problems is.
If I use a digital out (4 pin minipole connecter) from my cable box to the line in of the 2zs board, will it accept it...or is the line in for the 2zs analog only?

How to connect a USB-6008 with lookout6.0?

hi >>>
I am a student in electrical and computer department, i want to ask about
How to connect a USB-6008 with lookout6.0 if thats possible?Could you
provide some help?
Regards
Manal

Hi Manal there is a way to do this, DAQ or DAQmx drivers have an OPC server, you can find the detailed information in the next link
http://digital.ni.com/public.nsf/websearch/13BBC10CCC1FECBA8625720B00823140?OpenDocument
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD

5.1 sound in games with Creative Digital-Speakers and Audigy 2

Hi!
I know that you can't have real 5. sound (only upmix) in games with Creative Digital-Speakers. Is it possible to connect, without the decoder box, the soundcard with the subwoofer (Line-Out -3)? I want to make the cable for LIN_OUT 3 by myself, but which of the 4 pins are for the subwoofer, center front or center rear (ground is clear)?

Go to Knowledge Base article SID3069 then expand the "7. Soundblaster Cards".
It is possible to have 5. digital sound in games if your Creative speaker system has a digital DIN connection.

Analog conference phone on digital PBX?

It won't work on a DIGITAL line, but most Digital PBX had options for analog ports, and you can swap into that port just like you were hanging a fax line.

pretty much what it says up top, we've got a nortel norstar modular PBX that is (I think) digital, and I've got 2 polycom soundstation 2W conference phones that have apparently been collecting dust for 3 years. I could get one line peeled off and sent to our conference room just for the phones, but it looks like there are adapters that would allow at least SOME of our phone functions to work, but I'm having a bear of a time figuring out what I need. Can I get this phone working with this system, or should I stop fighting and just give it it's own line?
The phone line does come in via RJ11 to each office
Nortel Norstar/Meridian PBX system, and I'm hooking a Polycom Soundstation 2W phone up to it. Thanks for your time spiceheads!
This topic first appeared in the Spiceworks Community

Connect by Problems related with ancestors

Hello,
I have a problem with that.
I have a tree saved in a oracle table. Relationships are mantained with ID and PARENT_ID fields. I save information about Product, Subproduct, BasicSubproduct, (... there could be other levels), Part. This is the hierarchy.
For example, a Product is composed by Subproducts, each Subproduct is composed by BasicSubproducts, and so on.
In other hand, I have a table with data of Parts (for example costs of each one).
What I want is to show information of, for example "Car" Product, grouped by Subproduct (this is the immediately lower level of Product). For example for knowing which are the right parts I did that:
select * from
(select * from NODES
connect by parent_id=PRIOR id
start with id=244) t, -- Node of 'Car' Product
datos b
where
b.id=t.id
But what I don't know it's the ancestor related with the part (in this case it should be the id of the Subproduct). What would it be the right manner to achive that?
I'd appreciate your help.
Thanks.

Hi
You can join a hierarchical query as you suggest; you can also use SYS_CONNECT_BY_PATH() to identify the subproduct. Here's the kind of query you need - I've used the HR sample data, but you should be able to transform this into products, subproducts etc
select subproduct.first_name, subproduct.last_name, part.job_id, sum(part.salary), count(distinct part.employee_id)
from employees subproduct
left join (
select level lev
     , sys_connect_by_path(last_name,'/') reportsto
     , sys_connect_by_path(to_char(employee_id,'fm0000'),'/') ancestors
     , substr(sys_connect_by_path(to_char(employee_id,'fm0000'),'/'),7,4) subprodid
     , emp.*
from employees emp
start with employee_id = 100 -- like identifying the product
connect by prior employee_id = manager_id
) part
on part.subprodid = to_char(subproduct.employee_id,'fm0000')
where subproduct.manager_id=100
group by subproduct.first_name, subproduct.last_name, part.job_idYou'll see I've used a fixed format connect_by_path (with 4 digits per level) which makes it easy to pull out the second level.
HTH
Regards Nigel

BF3 poor audio quality with Dolby Digital Live anabled.

Hello, i have a X-Fi Fatality card connected to audio receiver with the Toslink cable with the Dolby Digital Live enabled, and in BF3 i hear that bullets sounds more like popcorn crack very low quality, with BF2 the audio was awesome. Anyone else having the same problem?

There are several Fatality cards - which one do you have? OS is Win7 i guess? So which driver are you using? Did you try Danial_Ks Support Pack? [url=http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-series-Support-Pack-2-5-10-25-2011/td-p/587995">http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-series-Support-Pack-2-5-10-25-2011/td-p/587995[/url] . You also installed newest patch for BF3?

Problems with my Digital Vault account

I have been having problems with my Digital Vault account lately. For about a week I was told that there was no connection with the server and then I started to receive messages that there was insufficient space left in my account to enable backups of my usual documents. I knew this was incorrect because my saved documents usually only take up around 50% of the available space.
In order to correct the problem I decided to delete all my saved copies and then re-upload them. They have all been removed but my 'My Vault' page still shows that something like 2.95 GB of the available 5 GB has been used.
I cannot understand this as my vault should be empty at the moment . Has anyone experienced similar problems ? What can I do to empty my vault so that I can reload my valued documents ?

Hi badsworth,
If you can fill in the contact us form in the "about me" section of my profile, we can take a look into this for you.
Cheers,
Chris
BT Moderator Team.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

My daughters iPod is lock with 4 digits and she can remember the numbers; what can I do?

My daughters iPod is lock with 4 digits and she can remember the numbers; what can I do?

Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iOS device will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

Adobe Digital Editions. I'm connected to the Internet but Adobe Digital Editions can't access to the "serveur d'autorisation" (I'm french). What can I do ?

Hello
I'm in trouble with Adobe Digital Editions
I bought a ebook and i need ADE to access to it. I have downloaded ADE 4.0.3 and install it. It ask me a autorisation for the computer to admit multiple access to the ebook. I sign in but ADE told me it can't access to the "serveur d'autorisation" as if i wasn't connected to the Internet. But I'am.
what can I do ?
Thanks for helping me

No one even has an idea? I'm lost.

HT1535 I got family guy: its a trap! with a digital copy to put on my ipod 4th gen, I tryed to move it from my library to my ipod and when it finally looks like it is going to work it says that it cant be moved to my ipod because it will not play on my ip

I got family guy: its a trap! with a digital copy to put on my ipod 4th gen, I tryed to move it from my library to my ipod and when it finally looks like it is going to work it says that it cant be moved to my ipod because it will not play on my ipod. Help please !!!!!!!

If you go to Settings do you see an entry for the Nike app? There is no way to delete or hide that app?
Have you tired using the Spotlight search? Maybe you just can't find it.
Next would be to restore a gain. First from backup then next to factory settings/new iPod.
The Nike app you can download/install
Nike+ Running for iPhone 3GS, iPhone 4, iPhone 4S, iPhone 5, iPod touch (3rd generation), iPod touch (4th generation), iPod touch (5th generation) and iPad on the iTunes App Store
Does work on the iPOd. You just do not get all the information that GPS/cellular connection can get. You will still be able to get distance/footstrikes like the installed app an you do not need the shoe sensor.. It uses the built-in sensors on the iPod

Can DAQ 6025E Interface with a digital multimeter?

Hi,
Can DAQ 6025E Interface with a digital multimeter? I have an ordinary digital multimeter without RS232, GPIB etc. Is it possible to read any instrument with a digital display with a DAQ 6025E card?

NO! You have no physical connection between the dmm and the pc. The digital display on the dmm cannot just be magically transmitted between the two. The 6025 can measure voltage. It is not a camera that can read the dmm's front panel. The 6025 sits inside the pc. There is a communication bus between the 6025 and the pc. NI-DAQ/LabVIEW software allows you to control the daq board and measure voltages physically present at the input pins of the daq board. Use the daq board and throw away the dmm or throw away the daq board and buy a dmm with a serial or gpib interface.

Connecting Cisco 2811 E1 with Siemens HiPath 4000 using DIUN2 interface.

I'm looking for a cable schema or data sheet or any info about connect a Cisco E1 voice gateway interface with a Siemens PBX with DIUN2 (DB15) interface.
Thanks.
Andrea.

This URL should help you:
http://www.cisco.com/application/pdf/en/us/guest/products/ps5820/c1072/ccmigration_09186a00804b546d.pdf

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more.

My macbook pro no longer connects to my TV with the mini dvi to hdmi adapter. A while ago the computer fell down and hit the cable. How can I tell if the computer is working ok. Doesn't show mirroring any more. Was working while watching a movie but when I pulled it out from the computer and put it back in the system would no longer mirrorr the screen on the TV.

The best option is an appointment at an Apple store genius bar. The evaluation will be for FREE!
Ciao.

CONNECTING CME 8.6 WITH NORTAL DIGITAL PBX

Similar Messages

Maybe you are looking for