Connecting Computer to Panasonic 1080 46" TV

I bought a DVI to HDMI cable to use my Panasonic 1080 46" Plasma TV as monitor so that I could watch DVDs after my Xbox 360 went out. I tried all 3 HDMI inputs and no picture nor sound. Does anyone have any suggestions?

Are you connecting your computer to your regular computer monitor plus your tv at the same time? Kind of a dual display?
If so, then you would need to go into your display settings and extend the desktop to the TV.
**If you like my answer then click the little Star under my username.
**If my response answered your question then click the Solved button. Thanks

Similar Messages

  • Connect Imac to Panasonic TV

    HELP!! I'm completely computer illiterate and I don't know what to do! I have a Mini DisplayPort to HDMI Adapter plugged into my IMAC (version 10.5.8). I have this connected to my Panasonic TV via an HDMI to HDMI cable. I thought this would automatically display the computer screen on the TV, but it doesn't. I have the TV set on the HDMI channel. Is there something I need to do to the TV or the computer? When in look in system preferences => displays, I can't see anything that would relate to the TV. Could it be that my cable is faulty, or is it just me that is faulty!!! Any help would be much appreciated!

    My TV had its HD size set to 1, which turns overscan on, resulting in the loss of the edge. I changed HD size to 2 and now there is no loss.

  • Can not connect computer to Cisco Connect -EA3500

    Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.

    Reading the manual it says the username is blank, password 'admin'.

  • HP PSC1610 won't print from internet. Error message says connect computer.

    When trying to print from the internet my printer start to accept the paper, but then spits it out with nothing on it.   I looked at the help menu and an ERROR message said  "no connection; connect computer or install device software.  This has never happened in the past until I installed new ink cartridges.   I unplugged and disconnected the printer then reconnected, etc.  Same problem.  Then I uninstalled and reinstalled the printer.  Installation successful, showed connection to computer, but failed to print document.  The error message is the same.    Help!   Thanks Xara
    I

    Actually this is an addendum to the above.  the computer used to send the command to the printer uses Windows XP.  When the command is sent the printer goes into warm up mode for 2-3 seconds and I hear the parts moving before it spits the blank paper out and aborts. The printer queue is empty on my XP as if the job was finished.  Thanks  Xara

  • How could I get the setup files to install Adobe Media Encoder in a non connected computer?

    HI,
    I'd like to try Adobe Media Encoder in a non connected computer.
    But I don't find the way to get the trial setup files.
    Thanks in adavance for your time.
    Mike

    AME is tied to other apps. There is no separate installer.
    Mylenium

  • Having trouble connecting computer to TV with sound

    I have a 2010 macbook pro and a samsung LN40B550 LCD HDTV - having trouble connecting computer to TV with sound - I'm not sure which connectors I need and have purchased a few that aren't working (HDMI: DVI cable & Mini - DP to DVI adaptor).  Any help would be greatly appreciated. Thanks

    Sorry to tell you that DVI does not support sound.  You either have to use a HDMI cable (with the appropriate adapter) or tap your audio output port with a 'Y' type cable configuration for sound.
    Ciao.

  • Connecting computer to tv for viewing EPIX,ETC.. but not through router?????

    I need to start connecting computer to tv for viewing EPIX,ETC.. but not through router?????  I have a workroom with a TV but without cable connection, so I thought I would connect my computer to my TV.  I have an Acer Aspire laptop. and a 27" tv.  Please can anyone tell me how to get this to work.  I need something to watch while I am working.

    I'm a little confused here as to what you're looking for. Are you simply trying to get Internet Connectivity to the computer using the best method possible or are you looking to try and send a signal to the TV without a cable connection going to it? The computer's Internet portion is easy if that is the case. If we can just get some additional information on that, we'll figure out how to approach it.
    1: Does this Workroom have any Coaxial cabling going to it that can be connected back to the cabling the FiOS equipment is using?
    2: Is Ethernet cabling available and running to the location of the router, or nearby?
    3: Would Wireless work for you (as much as it is not ideal)?
    4: Are you looking for a Physical connection to the network?
    Now if what you're trying to accomplish is the actual connection between the Computer and the TV, check to see what inputs the TV supports (HDMI, VGA, DVI, Component, Composite) and see what the laptop supports (DisplayPort, VGA, HDMI, DVI). More than likely the Laptop would have a VGA connection along with the TV. Your best bet would be to honestly just connect a VGA Cable between the two machines, and then for audio, just use a 3.5" to Composite connection for the TV (Unless the TV has a 3.5" Input jack for the PC Input). If HDMI is available on both devices, by all means use that. Same with DVI as both give better picture quality over a VGA Cable.
    If you can give us exact model numbers, that would help.
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • When I try to scan a document on my MF8050cn, I get a "Connect Computer" error.

    When I try to scan a document on my MF8050cn, I get a "Connect Computer" error.  I am running Windows 8.  My device is directly connected to the computer.  I can print from the computer to the printer without issue.  I get this error when using the controls on the device. 
    If I try to use the MF Toolbox - Scan Function controls, I get the following error message: "This action cannot be completed because the other program is busy.  Choose 'Switch To' to activate the busy program and correct the problem."  When I click "Switch To", it brings me to the Windows 8 tiles screen but does not resolve the issue.
    Please help!

    Hi h_rankin.
    I recommend uninstalling and reinstalling the drivers and software.  Please follow the steps below to perform the operation:
    1.  Unplug the USB cable from the printer.
     2.  Press the Windows key and 'x'.
     3.  Select 'Control Panel'.
     4.  Select Devices and Printers.  The Devices and Printers window opens.
     5.  In the Devices and Printers window, right click on the MF8000 Series and select 'Remove' to delete the printer.  Delete all of the icons for the MF8050Cn.
     6.  Close the Devices and Printers window then press the Windows key and 'x'.
     7.  Select 'Control Panel'.
     8.  Select 'Programs and Features'.
     9.  Double click on driver to uninstall.  Follow the on screen prompts.  Repeat to uninstall the MF Tool box.
    10.  Restart you computer.
    Once your computer restarts, please follow these steps to download and install the drivers and the MF Toolbox from Canon's web site:
     1.  Visit our web site at: http://www.usa.canon.com.
     2.  After clicking SUPPORT & DRIVERS in the top right corner, select your model in the following manner:
         a.  From the first menu, select CONSUMER & HOME OFFICE.
         b.  From the second menu, select PRINTERS & MULTIFUNCTION.
         c.  From the third menu, select your series, IMAGECLASS SERIES.
         d.  From the fourth menu, click DRIVERS & SOFTWARE under imageCLASS MF8050Cn.
     3.  Click the drop-down arrow and change the operating system to Windows 8 (x64).
     4.  Click on 'DRIVERS', then click on [Windows 64bit] imageCLASS MF8050Cn MF Drivers file. 
     5.  Click on I Agree - Begin Download on the next page.
     6.  When the Save As box comes up, choose Desktop and click Save. 
     7.  Once the download is complete, click on 'I Decline- Go Back' and you will return to the previous page.
     8.  Click on 'SOFTWARE', then click on the [Windows 32bit & 64bit] Tool Box Ver.4.9.1 file.
     9.  Click on I Agree - Begin Download on the next page.
    10.  When the Save As box comes up, choose Desktop and click Save. 
    11.  Once the download is complete, close all windows.
    12.  Double click the [ToolBox_4911mf16_Win_EN.exe ] file on the Desktop.  Follow the prompts to install the MF Toolbox.
    13.  Double click the [MF8050Cn_MFDrivers_W64_us_EN_2.exe] files to decompress them.  A new folder will be created on the Desktop.  The new folder has the same name as the decompressed file.  Double-click the decompressed Setup.exe file to start installation.
    14.  Once that window goes away, connect the USB cable from the MF8050Cn to the computer.  Installation will complete.
    Wait a few minutes then scan a document using the MF Toolbox.
    If you still experience any errors, or need any further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666). 
    Have a good day.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • N73 connect computer hardly!

    N73 connect computer hardly.
    After updating to V4.0727.2.2.1, my phone doesn’t ask me using what kind of mode to connect .when I use capable to connect computer.

    Hi
    I want to connect my phone to computer without PC Suite.
    Are there any software to doing this? I want Windows XP usb driver software for N73.

  • HT1212 i changed my ipad password and have forgotten what I changed it to. How do I unlock ? I have access to a computer and cable to connect computer to ipad.

    i changed my ipad password and have forgotten what I changed it to. How do I unlock ? I have access to a computer and cable to connect computer to ipad.

    Forgotten passcode
    http://support.apple.com/kb/HT1212

  • TS1702 Why quickoffice pro quits once I write its URL in the browser to connect computer to iphone 4 with iOS 6.0.1?

    Why quickoffice pro quits once I write its URL in the browser to connect computer to iphone 4 with iOS 6.0.1 ?
    this happened only after upgrade from iOS 5 to 6.1

    that's what i thought after researching. thanks!

  • Apple TV 3 slow to download from iCloud and connected computer.

    Apple TV 3 slow to download from iCloud and connected computer. Wired via ethernet with very fast upload and download speeds. Can anyone help please? Accessing YouTube is even incredibly slow. Have reset, no joy. Have changed DNS to Google DNS, no joy.

    Resolved!  Disabled BT Home Hub as wireless. Removed Devolo wireless plugs from house. Removed TP link powerline adapters (Apple TV was connected to ethernet). Set Time Capsule as the only wireless point in the house. Interestingly, if you have more than 1 access point in the house, BT Home Hub can get a little confused - so removing its wireless capability via the admin function via advanced settings basically set Time Capsule as only access point in the house). Changed DNS on Windows 7 machine to Open DNS.....(FYI, outside of US & Canada, Google DNS is pretty much useless and won't speed up your download speeds on Apple TV).  Restored Apple TV to factory settings and started again. Downloads from iCloud almost instant; downloads from shared computer almost instant; streaming from YouTube and Netflix almost instant. Happy days....

  • How to resolve ip address of  all connected computer in network

    Hi,
    I want to resolve IP address of all connected computer in intranet.
    I want to broadcast the message in network.
    Which api I have to use for it?

    I want to resolve IP address of all connected
    computer in intranet.You won't get hold of that information if the network is configured correctly.
    Kaj

  • Problem HDMI connection to new Panasonic TC-60ps34 plasma; tv says no signal but computer detects tv; worked fine on 4 yr old phillips plasma; 2011 macbook pro running os10.6.8.

    New 60" Panasonic plasma says no signal won't display picture/sound from 2011 macbook pro running os10.6.8 connected via HDMI with moshi MDP to HDMI Adapter. Same setup on former 4-yr-old Phillips Plasma worked fine (but the tv died!)

    dohdoh1985 wrote:
    - I tried every Snow Leopard Release from 10.5.8 to 10.6.4
    Assuming this means the TV was not detected in any of these versions, this would not be a Snow Leopard installation or setup issue. I think that is what sig is trying to tell you.
    If this is true, you might want to post in the MacBook forums to see if anyone has a similar issue. It would be a good idea to post the model number of your Toshiba if you do so, as this might be relevant. Otherwise, it sounds like the problem is in the TV, since the MacBook works with other displays.
    Tip: to avoid unexpected formatting oddities that might make your posts hard to read, you can use the "Preview" tab before you post to see how your post will be formatted.
    Message was edited by: R C-R

  • Sound drops off when using hdmi outport to connect computer to an AV reciever

    Satellite M640,I5 2410 processor, windows 7HP. After about three minutes the sound drops off when connected to the av reciever through the hdmi outport. If I touch the trackpad the computer reconnects for another three minutes and  then disconnects. If I touch the the trackpad about every two minutes the computer stays connected indefinetly. This problem does not occur if I use the computer to play an audio CD. Any fix suggestions.

    Hi peter,
    try to repair your permission by open application folder > utilities > disk utility > repair permission.
    It should fixed the unexpectedly quit for several applications.
    And try to get latest info from Griffin sites, maybe this one will help too:
    http://www.griffintechnology.com/support/article.php?artnum=314
    ps: why not try macbook built in microphone?
    Good Luck.

Maybe you are looking for