Connecting cProjects 4.5 to SAP R/3 4.7 possible ?

Hi Guru's,
we have the challange in an customer project to connect a cProjects 4.5 to a SAP R/3 4.7 system. The installation guide said that the component ECC 5.0 is mandatory for the connection from cProjects 4.x. So this component is not part of R/3 4.7 of course. The question is: is there a official possibility to connect a cProjects 4.5 system to SAP R/3 4.7?
Thx a lot for your support ...
Jochen

Hi Jochen,
there is no standard solution for this. However we have done this on customer-specific basis and could offer a consulting solution. I do not have the details at hand, but you can drop me an eMail with your business details as short reminder and I will try to get the information for you.
Better - of course :o) - would be to consider an upgrade of the R/3 system or to wait for this upgrade, if it is planned for the near future anyway to avoid efforts for you.
Best regards
Thorsten

Similar Messages

Bw publish and connections not based on the sap bw mdx query driver

Dear experts,
we are currently facing a problem with transporting reports that are based on multiple database connections and joined using the cross database join feature of crystal reports. One connection is based on the SAP BW MDX driver, the other is based on a SAP functionmodule.
Now when transporting the reports with STMS and publishing them via /crystal/rptadmin and bwpublish only the bex mdx query connection gets updated. The other connection is still pointing to the original location.
e.g.
transporting
DEV -> PROD
function module still pointing on dev server.
As we need to use the sap default transport system in order to get all features (no SP4 yet) and we can not change the reports manually in the PROD system before publishnig and don't want to mix in the LCM we have no idea how get a work around for this problem.
Changing the database connection via CMC on the PROD system has no effect either.
Please help.
Thank you very much!
Thorsten

Hello Thorsten,
What you observe is "By Design" of the product. The dynamic update is supported only for reports using the BW MDX driver (or historically for those using the deprecated BW query driver). Other SAP drivers such as the OpenSQL driver which you use to connect to the function module do not leverage the same features when using the SAP Transport process.
You may report directly against your target system when connecting to Function Modules.
thanks,
Akin

Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?

hello,
I went to the PAM in the SAP Marketplace to see if SAP GRC AC 5.3 could connect to SAP R/3 4.7 Enterprise but I can't see all the "Add-On Product Version for...", it's cut off.
Can SAP GRC AC 5.3 connect without any problem with SAP R/3 4.7 Enterprise?
If I can't is there any proof about it? I have to show it to a client.
Best Regards,
Pablo Mortera,

Pablo,
GRC AC 5.3 works perfectly fine with SAP's R/3 4.6c, mySAP ERP 4.7 and ECC systems. In fact we have two 4.7 Enterprise systems connected to GRC AC 5.3 system.
You can get the details of supported SAP ERP systems under prerequisite section of Info page of GRC AC 5.3 , it can be accessed on marketplace at -
Downloads-->Installations and Upgrades - Entry by Application Group > SAP Solutions for Governance, Risk, and Compliance>SAP GRC Access Control>SAP GRC ACCESS CONTROL>SAP GRC ACCESS CONTROL 5.3
Just ensure to have proper BASIS and ABAP support pack level as mentioned in prerequisites.
Regards,
Amol

Need to connect to GreenPlum Database in SAP BI 4.0

Hi ,
We Need to connect to GreenPlum Database in SAP BI 4.0,
i dont see any specific driver to set up a system dsn for this data source.
So can any one share your experience if you built a universe based on green plum db(UNX using IDT in 4.0)
or even in earlier versions of BO how to create a system dsn for greenplum db,
which driver we need to use.

Hi,
Infact, GreenPlum 4 is not 'officially supported' with BI 4.0 until Feature Pack 03 next year.
This is OK currently:
Greenplum     3.2     JDBC     PostgreSQL 8.4 JDBC
Greenplum     3.2     ODBC     PostgreSQL 8.4 ODBC
This will come with 4.0.FP03 :
Greenplum     4     JDBC     PostgreSQL JDBC 8.4-701
Greenplum     4     ODBC     PostgreSQL ODBC 9.00.03.00
Regards,
H

Connection between Crystal Report and SAP ECC

Hi. can you help me please.
I'm testing the connection between Crystal Report and SAP ECC. I tried using the tables,
but by making the links between foreign keys does not bring data. The other way I tried was using an ABAP function module,
but using this way, Crystal will only works like a Presentation Layer because all the work was did it in ABAP;
besides that shows the limitation that I can not pass as input a table.
what is the best practice for reporting on SAP ECC using Crystal Report?
Thanks.

Hi,
Crystal Reports is able to leverage tables, ABAP functions, SAP query and InfoSets.
what is the issue when using the tables ?
ingo

How ADBC connection is benefits by using SAP HANA as secondary database ?

Hi,
I have one more important question.
How ADBC connection is benefits by using SAP HANA as secondary database in terms of performance wise for the access of data from HANA database as a secondary database.
I have 2 options and which is better for the good performance for accessing the data-
1 . In ABAP Reports in the SELECT statements by using CONNECTION (“HDB”) will this improve the
     performance.
      e.g : select * from BSEG into TABLE IT_TAB CONNECTION (“HDB”).
2. Will Create the Stored procedure in HANA studio and Call
   from ABAP as below by using NATIVE SQL–
     EXEC SQL
      SET CONNECTION (‘HDB’).
     ENDEXEC.
    EXEC SQL.
      EXECUTE PROCEDURE proc (IN    p_in1
                             OUT   p_out1   OUT   p_out2 )
   ENDEXEC.
Regards,
Pravin
Message was edited by: Jens Weiler
Branched from http://scn.sap.com/thread/3498161

Hi Pravin,
Option 1: In this case ADBC might even worsen the performance due to the overhead in the ADBC framework. OpenSQL is the method to go here, as OpenSQL - from the ABAP point of view - features the optimal communication with the database while ADBC has overhead like constructor-calls for the statement, parameter binding, etc.
Option 2: In this case ADBC is comparable with EXEC SQL but features more options, e.g. clean concept of multiple connection (connection objects via CL_SQL_CONNECTION), exception handling, etc. So I strongly propose to favour ADBC over EXEC SQL, but not simply for performance reasons. You might have a look at the ABAP Language Help in your system on more information on ADBC and the advantages over Exec SQL.
Cheers,
Jasmin

Webinar- Connect Third Party Systems with SAP B1 – DI API, DI Server, B1WS

Webinar happened on 21st August.
Get the Presentation, Video recording and answers of all the questions asked in the webinar through the below link.
Webinar- Connect Third Party Systems with SAP B1 - DI API, DI Server, B1WS

Hi Oleksiy,
I don't see anything strange in your code. You should receive an error message but it shoudn't loop without end ;o(
The only thing I can propose you is to create a message for support, they will have a deepest look into your problem.
Regards
Trinidad.

Any Program to connect JAVA for DB from SAP

Any Program to connect JAVA for DB from SAP,
Rather than JCO Is there any other option,
Please tell that option ,
and how to do that,
thank you,
Regards.
Jagrut BharatKumar Shukla

Hello Al Mamun,
SM59 is for RFC (remote function call).
If you are looking for ODBC-like connection, would you consider Tcode DBCO, then use native ABAP code to connect to the remote SQL server?
Best regards,
Victor

How to connect MS-sql server with SAP BW

hi all,
i want the connection procedure to how to connect MS-sql server with SAP BW.so that i can extract the data from ms sql server and can create cubes using that data.please help me in this issue.

Hi Vamshi,
Go through this DOC it explains u how to connect to other data bases like SQL...
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/58f4db47-0501-0010-a2bf-ff01b150fdff]
this is a thread related to connect the SQL server..
[DB Connect MS SQL Server;
Regards,
NR
Assign points if helpful...

Type Of Connection For Crystal Report in SAP B1 2007 A

Dear All,
            I want to make Crystal Report for a module?What connection must be used? I made User DSN and File DSN both but when I called that particular .rpt file from SAP B1 2007 A it shows the error "
                    Crystal Report Windows Forms Viewer
                    Failed to open the connection.
                                                                                Failed to open the connection.
                    TestFileDSN_OITM {A3103093-3D56-4F37-95B4-AD9739E212A2}.rpt
If possible please tell me the details how to used appropriat connection on both client and server (if possible step by step).
Thanks in advance
Ghazanfar

is your report running inside SAP b1 or directly from crystal report in system where you developed it
In Client you need to install .net framework 3.5 and Crystal Run time to run reports.
in the client make sure the shared directory is accessible from run without any password
and in the add on go to report properties and set the path to the shared folder .rpt files and apply changes
use OLE DB connection
CRYSTAL REPORTS 2008 V1 FOR B1
(click on Installation)
https://websmp208.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=N&EVENT=TREE&TMPL=01200314690900002156&V=INST
Crystal Reports Integration for SAP Business One
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/707f51b3-0b20-2b10-8daa-d8ee72ace309 [original link is broken]
in case you have any problem installation go through the demo and make sure you have installed correctly
https://websmp201.sap-ag.de/~sapidp/011000358700000727712008E.htm
Thanks
Krish

Problem connectivity of Web Dympro with SAP Netweaver

Hi guys,
I've a problem connectivity of Web Dympro with SAP Netweaver
I installed Sap NW in a machine on the local network with IP 192.168.x.y, and I can connect to it without problems; I can use the portal and implement jobs in Visual Composer.
After installing Sap Developer Studio, I connected it successfully to the NW through the menu "Preferences->SAP j2EE engine" selecting the option "SAP J2EE is installed on remote hosts" and inserting IP address of the machine with NW (192.168.x.y) and port 3900.
Using these parameters the logon works, in fact I can see the tab "J2EE engine".
The problem is that when I try to make the deploy, Web Dynpro asks me the SDM password (that I'm sure I've inserted correctly) but it returns the following error to me:
Deployment aborted
Settings
SDM host : SVR-NW
SDM port : 50118
URL to deploy : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
Result
=> deployment aborted : file:/C:/DOCUME1/Michele/IMPOST1/Temp/temp59548Welcome.ear
Aborted: development component 'Welcome'/'local'/'LOKAL'/'0.2010.09.01.07.31.29':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [svr-nw] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot authenticate the user.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
I want to add that I use Win XP Prof, and I set the same credentials (user "Administrator" and the correct password) I used on the machine where SAP NW is installed.

Hi Michele,
There were 2 cases I explained, and the second was the one in case your SDM was blocked. Did you try the first one?
Anyways, here is something more that you can try to get it working. In case the SDM password is valid, did you log into the portal as the Administrator? If yes, then you must have been asked to change the password. If you did change the password there, login to the remoteGUI using the Master password (abcd1234) and change the password there also to the same password you use for Administrator on the Portal. Now try again.
In case the above doesnt work, start the configtool.bat from \usr\sap\J2E\JC01\j2ee\configtool and go to secure store. Here define the J2E passwords again (the same new password you gave for the Administrator in the portal), save and restart the server. I think it would work then
Hope that helps you out!
Bye,
Sameer
P.S - the main thing is that the error you got was Authentication failure using the Administrator username. Thats why you have to make sure that the password for the SDM is the same as what you gave for the Administrator login in the portal. So after you login into the remoteGUI, CHANGE the password to what you have for the Administrator(just like the one in the portal).
Message was edited by: Sameer Jagirdar

About connecting Bio-Metric devices To Sap B1

Hi Every One,
Can we able to connect Bio-Metric devices To Sap B1,
if yes , Please Tell me Detailes
regards
srinivas

Managing Bio-Metric devices is more of a Operating System function then SAP Business One.
Could I ask the specific area where you are thinking of applying this in connection with SAP
Suda

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

I am having trouble connecting MacBook Pro (10.6.7) to Novell server. I get incorrect username and password message. I can connect worksations running 10.5 without any problem. Any possible solution? Thanks, Ned

Having the exact same problem with connecting ML and Snow Leopard machines to a Windows 8.1 machine. Oddly enough, connecting and copying to/from works perfectly from a Mavericks machine, despite the problems reported about Mavericks regarding the exact opposite. An old thread, but did you find a solution?

We recived ipads today in school to use as a tool and they said if i sync it to my itunes my itunes will be erased and all the ipad stuff currently on there would be erased the second i connect to the school i was wondering if this was possible?

we recived ipads today in school to use as a tool and they said if i sync it to my itunes my itunes will be erased and all the ipad stuff currently on there would be erased the second i connect to the school i was wondering if this was possible? i already pointed a couple things that they said was true but were false like useing that find my ipad thing were it just zooms in on your location they also said it would beep and they can track it anywhere witout a 3g network which we use the wi fi. teachers can connect to itunes i belive becasue they don't have the same rescrtictions as use students but early in the year they said one teacher tried and failed with the results that said would happen to use. besides ristrictions like loseing the app store and not being aloud to open any app wemb adresses we are to add music via the itunes that i already on the ipad. i was just wondering if there full of it right now because i think they are.

If I were a teacher setting up iPads to be used at school/work, I wouldn't link it to my personal iTunes, rather I'd create/use a different one. If for no other reason than to keep the kidlets and your fellow teachers from possibly accessing your account.

Can I connect window device like modem, mobile in oracle forms,if possible then how?

Can I connect window device like modem, mobile in oracle forms,if possible then how?

Hi Tony,
So explain where you would see your notification?I just mention, Leave module, there are many other module. For example In Purchase Purchase Requigition , Production Module Production Complite , Delivery Module Delivery Ready.
For this it will better to show at respective Menu.
In the Window title?Another good Idea !
You could have a timer trigger that runs every 5 minutes and checks a notification table, if there is an unacknowledged notifcation, then you could change the Window title of the formas app to show a (1) at then end of it.Timer has a bad this.. For example, if i make a timer and run every 5 min. then if user works on a form, timer will hide the form and show the timer window.
Isn't it ?
Would that do, or do you need more?Yea.. More..It will be like facebook. If any notified work is done by any person, light will go off.
Thanks for your interest and suggestion...
Ask2Learn
Edited by: Asked to Learn on Jan 23, 2013 12:36 AM

Connecting cProjects 4.5 to SAP R/3 4.7 possible ?

Similar Messages

Maybe you are looking for