Connecting Creative zen microphoto to my

Do I need to buy anything special to connect the device to my car to play music. If so what do I need to buy?Message Edited by Spiral_out on 08-27-2006 0:08 PM

If you car stereo has an aux input then all you need is a cable. If not, then if your car stereo has a tape player you need a cassette adapter. If there is no tape player then you need an fm transmitter that will broadcast a signal from the player so that you car radio can receive it.

Similar Messages

  • Creative Zen MicroPhoto has cras

    My Creative Zen MicroPhoto fell foot onto the floor.
    When i restarted- it compiled library for a 0 seconds and then continues to open as normal.
    All my music and recordings do not appear in the menu system anymore. When i do a system check my stuff still takes up 3gb of storage but no files appear.
    I have tried rebooting and clean up etc but still no joy.
    I have tried the Recovery tool - but my laptop does recognize the device when i connect using USB.
    Some of the recording of lectures and conferences are important to me.
    Is there anyway of retrieving these?
    thanks,
    GaryMessage Edited by garymcginty on 02-08-200805: PM
    Message Edited by garymcginty on 02-2-200807:55 PM

    How are you transferring the music? Can you describe exactly what you do? For instance what software you use, what steps you follow to transfer the music...
    Cat

  • Need help with Creative Zen MicroPhoto 8g

    my friend gave me this mp3 player.. the creative zen microphoto 8gb.. umm i have no cd for it n he didnt have it when he gave me it, i am wondering how to put stuff on it.. i deleted all the stuff that was previously on it, it says theres over 7gb of total space but only 2.4gb of free space? whats with that? anyways.. i went to the downloads in the support section and i downloaded and installed the drivers needed and everything but the program shown in the How-To put files onto the mp3 player will not install.. it says the device is not detected when installshield comes up and everything.. i tried a few diff variations of the program.. please help ... i want to put songs on it

    i installed windows media player like a hour ago before i saw ur post.. now when i connect the mp3 player to my laptop it doesnt install or anything.. is there a way to install windows media player 0 again, when i try it says that my version of windows does not support it

  • Creative Zen Microphoto 8GB hangs

    Hello,
    I have seen a lot of posts on the same subject here, but have not seen any resolution yet.
    I am sure the story sounds familiar... hangs at "Creative" logo, I go into recovery mode, and run scan disk or format etc... They don't work. I have even left the player on "formatting" overnight until the battery drains and it never finishes, same goes for "Scanning".
    I am on my 4th player now and am having the same issue again. This time the player is now out of warranty so I can't return it, and I am not paying money out of my own pocket to get this thing fixed. Please don't tell me this product is defecti've... I don't buy that excuse. And it isn't a corrupt file, because a reformat would fix that.
    Once it hangs, my computer won't recognize it, so I can't even try to update the firmware or anything.
    Any new updates or information on this issue? It is obviously a well documented problem...just google "Creative zen freezes" and see how any hits you get!
    I am pretty disappointed with this player. I should have followed my gut instinct in the first place, and just bought an iPod. I spent a lot of money on this paper weight. Any help,advice,prayers,or donation$ (for a new iPod) would ge greatly appreciated!

    LooKeng wrote:
    Hello,I got a Creative Zen MicroPhoto 8GB - It's a Mp3 Player as u probably know and it got reseted or somthing i think and i've lost my driver CD incase that should solve the problemToday at the morning I tried to hear some music on my MP3 player and suddenly a weird menu that i've never seen before with some 4 options and a title like This:Recovery ModeCreative Zen MicroPhotoV0.0.65(Then the options) Clean Up2 Format All3 Reload Firmware4 Reboot?What Should I do now ?Thanke You In Advance..Message Edited by LooKeng on 0-2-20080:07 AM
    Right you will need to download the latest firmware from this site.
    Here is a hyperlink to where you can download the firmware:
    http://uk.europe.creative.com/suppor...lect=4&x=9&y=2
    You might have to put some details in.
    Once you have downloaded the latest firmware just start the program up.
    Plug in your Zen into the PC and then press the "Reload Firmware" button on your Zen.
    You should see your computer screen pick it up.
    Then you click on your PC to install firmware.
    That should be it.
    I hope this hel
    ps.
    Got any questions you have just post on this space.
    I do apologise if this does not make much sence my grammer is not that brilliant.

  • Creative zen microphoto booting probl

    My creative zen microphoto wont load. It's just a black screen with the creative logo. I have tried to format it from the recovery mode but that freezes too. Can anyone tell me any possible solutions to this problem?

    same problem here, creative logo stays until all the juice is drained

  • Creative Zen Microphoto is messing

    i have a creative zen microphoto firmware version .20.0_0.00.65 and it is giving me some problems. i can get it to turn on and play but it will only play the song i had it on yesterday when it was working fine. now it is like none of the buttons will work on it. i cant get it to go to other music or even pause the song it is on. i cant even turn it off without taking the battery off. please someone help me with my problem. thanks much, alex

    yep I knew it.... I have the eq on accoustic,the bass is on the backlight timer is for like 20seconds. I navigate thru the menu alot... But still I should get at least some mored days than just one..One day I will need to get a new battery..

  • Computer can't connect to Zen MicroPhoto. Strange sou

    When I connect my Zen MicroPhoto to my computer's USB port and turn on the Zen Micro Media Explorer, it'ssaid my device is not connected (although it had). And usually?when you connect a USB device, there's a high-pitched beep followed by a low one, but with my Zen it is 3 low beeps consecuti'vely. I've already tried other USB device (my thumbdri've) and it works and sounds normally. Any suggestions?

    Run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Creative Zen Microphoto Not Detec

    Hello all,
    I bought a Creative Zen Microphoto yesterday and when I try and plug it in to my USB port nothing happens. I've tried holding the on/off button, I've tried it when it's on. I've tried all of my USB Ports. I've tried it on two different computers.
    My computers are running Windows XP with Service Pack 2. I've disabled Norton while trying all of the above. Before plugging my mp3 player in I installed all the software that come on the CD.
    Just to clarify this:
    The Microphoto won't charge, be detected, etc while in the USB port. It runs fine off my PC ( plays the pre-installed songs, etc ) but as I cannot plug it in to my PC to charge it, add, songs, etc I cannot add my own songs.
    Windows doesn't even pop up saying new hardware has been detected, or a USB device has been detected. It just remains how it was before I plugged the device in to my PC.
    My computer doesn't show it in removalable devices, nor in Windows Media Player 0.
    Anyone have any ideas?
    Thanks.Message Edited by Kemik on 07-3-2006 05:3 AM

    Try this, go into the Control Panel and click Add/Remove Hardware. Just click next and see if it detects newly added hardware.
    Can your computer detect any old flash dri've?

  • Creative Zen MicroPhoto/animated GI

    [color="#6633ff">Hey, you guys, I was wondering if Creative Zen MicroPhotos[size="3" color="#6633ff"> are compatible with animated GIFs. They classify as a really short video for me. They're still pictures, but it's like a small scene that replays over and over. I found one of Napoleon Dynamite dancing, and I would love to have it as my player's background!
    Thx.
    <3 ya!
    Message Edited by bluezmplover on 03-28-200605:3 PM

    Nope, don't think so.

  • Creative Zen Microphoto half-instal

    Hi, I have a zen microphoto and I was installing the software + drivers + stuff onto my computer and there was a power cut halfway through installing, now there is a creative folder in Program Files (presumably only half full) but no listing on the Add/Remove software tool and when I try to reinstall, it doesn't launch the installer and instead just says Creative Zen MicroPhoto was successfully installed, even though it wasn't.

    same problem here, creative logo stays until all the juice is drained

  • Creative Zen Microphoto: Operating Syst

    Guys,
    Am I right in saying that I cannot use windows 2000 operating system on the Creative Zen Microphoto?
    Is there any way around this? I now have a Zen Microphoto sitting in a box, useless to me because I only have Windows 2000!!!!
    Marc Smith,
    Dublin.

    MarcSmith, I am not sure if you got it in your box. But I know it came in my box (I bought it at bestbuy, if it matters).
    If you can return it even if it is open, then I say go ahead and open the box and look for a CD called Easy Start (it is microsoft). Instail that and you should be able to use it under media player 9. I also tried Media Monkey and it worked, so I think you can use any software that supports the player, after you instal the easy start cd.
    You can now also charge the player using your computer.

  • Creative Zen Microphoto froz

    Hi!
    I have a Zen Microphoto (8 GB) and was very happy with it until last week. I connected it to my laptop like I did several times before, but it behaved strange: it went on automatically and showed the screen you see when a song is playing, but it did't play. The player was frozen and didn't carge also. I then noticed that my computer didn't recognize it at all, likewise the Creative Explorer. The only possibillitiy to switch it off was to remove the battery.
    When I reconected the player, it said "rebuilding libary", but afterwards it fell into the same state again. I left it hooked up to the computer for several hours, but it didn't charge or anything else. I tried all my Usb-ports, I have XP SP 2, the drivers are installed, it worked perfectly fine before and I did not change a single thing on my system.
    Do you have any ideas?
    Thanks a lot,
    Johannes

    http://sg.creative.com/support/downl...type=4&x=2&y=4

  • Connecting Creative Zen Touch to Stereo (Bose Lifestyle Syst

    Hi Folks,?A bit of a naf question, I want to connect my Creative Zen Touch to a Bose Life Style System, To provide the best quality Audio connection can you advise what is the best cable for me to use. On a seperate note has anyone any comments on the Cambridge SoundWorks Dock Station, I would like something to connect the Zen Touch to for the kitchen, the cambridge sounddock id a bit of an ugly beast. Is there anything a little easier on the eye but with the same excellent audio quality. Thanks in advance for any help?Earlsie

    scorpian007 wrote:
    If you have RCA inputs on your stereo, just buy a 3.5mm to 2 RCA cable and connect it that way. If not, buy an FM transmitter, connect it to the headphone jack on your Zen Touch, set it to a channel and then tune into that channel on the stereo's radio.
    Hope that hel
    ps.
    Here's a pic & link too:
    http://www.radioshack.com/images/ProductCatalog/ProductImage/42/42-2483.jpg">
    You can buy it at any RadioShack (in America) and in Canada I would assume FutureShop would have it as well as any local electronics store.

  • My PC doesn't 'react' when I connect my Zen Microphoto

    Hello,
    I'm Michel van Gelder and I have a problem with my Zen Microphoto. I am going to try to explain my problem in proper english, but english isn't my main language, so please forgive me if i make terrible mistakes or something.
    My problem is:
    If I connect my Zen to my PC it says something like, what do you like to do, but when i click on an option it says: Media Device isn't connected. And also when I connect it, a symbol appears in the right corner, next to all the others, but when I try to do something with it's(with right mouse button or something) it disappears. The result is that, with everything i try, the PC says that my mp3 isn't connected. While 've installed all the software properly etc.
    I have this MP3 for 2 years now, and I've never had this problem. Until 2 weeks ago, when we had to reinstall our computer. So my question actually was: Is there something wrong with my Zen or with my PC. And, what can I do about it's
    I hope someone knows the answers to my questions. Thank you very much
    Michel van Gelder

    Hello Huevo Chico,
    The article linked below details some useful steps that can help get your iPhone and your Mac to work together.
    iOS: Device not recognized in iTunes for OS X
    http://support.apple.com/kb/TS1591
    Cheers,
    Allen

  • Creative Zen Microphoto - "Firmware upgrade failed&qu

    Hi,
    two days ago my Zen Microphoto started in "Recovery Mode".
    I had no means of getting out. I first selected "Clean Up" and rebooted, still "Recovery Mode".
    Then I downloaded the latest firmware version for it:
    ZENMicroPhoto_PCFW_L6__3_0.exe
    Then I selected "Upgrade Firmware", acknowledged with "Yes", the firmware was deleted, but the windows firmware application said "no player connected" after connecting the player.
    Okay, after googling a bit, I found out that I needed to downgrade from WMP to WMP 0.
    I (painfully) did this and after installing an additional Registry Key via fixup.cmd the
    ZENMicroPhoto_PCFW_L6__3_0.exe
    detected the player (hurray!). It showed "Current Player Firmware Version .20.0 " and "Upgrade File Version .3.0".
    When clicking on "Upgrade" at the windows application, the blue progress bar appeared and the player showed "Recovery Mode" and a blinking USB logo.
    What it did NOT show afterwards was a gear symbol with "Upgrading firmware" (which I found on a screenshot in the internet).
    When the blue progress bar of the windows firmware upgrade application reached about 85% it halted and after minute the windows firmware application showed "Firmware upgrade failed!" while the player only showed a black screen with "Recovery Mode" and the green battery symbol at the top.
    I also tried the same procedure with
    ZenMicroPhotoP4S_PCFW_LB__20_0.exe with the same result: "Firmware upgrade failed!"
    Any ideas how to "repair" the player
    Toddl
    Message Edited by Toddl on 04-2-2008 09:40 AM

    I have this same problem except with the Zen Vision: M. Any help would be appreciated.

Maybe you are looking for

  • BAD SERVICE AND RUBBISH PRODUCT

    Firstly i have managed to stop 2 different family members from changing their service to BT, they would thank me if only they knew. I have only been a customer for 6 months, for the past 2 months i have had vision and broadband issues and am now chas

  • Does Aironet AP1121G support multicast?

    Hello everybody.Can the two wireless client under the same AP1121G support the multicast forwarding?What do I config on the AP1121G? Thanks a lots.

  • Cann't preview , publish , test debug Flash Movie.

    Now, I am using Adobe Flash CS3 and press CTRL + Enter to preview the movie , but now I Cann't do it , the movie isn't display anything ( but I can preview only one scene by press CTRL + ALT + Enter). I try to publish the movie, the error message is

  • Using the Air Browser inside an Air Desktop App - how to activate webgl?

    Hello, I´m using Adobe Air/Flex to build a Desktop App. Inside the App the user should be able to access an Internet Browser. This part is actually working so far. BUT:   THE ADOBE AIR BROWSER IS NOT SUPPORTING WEBGL. Is there any method to activate

  • Extending a network and the new guest access feature

    Hi- Currently, I have 3 of the 802.11n Airport Extremes-One creating the network, and two extending the network. I would like to get the new feature that allows you to setup guest access--- My question: Will I be able to purchase ONE of the new Airpo