Connecting CRM to PI 7.0 by means of SPROXY

Hi,
Now I have CRM connected to XI 3.0 by means of SPROXY. The scenario is the following:
CRM <-> SPROXY <-> XI 3.0
Could I make this scenario using PI 7.0 rather than XI 3.0? I need to connect CRM to both XI systems at the same time so:
CRM <-> SPROXY <-> XI 3.0
CRM <-> SPROXY <-> PI 7.0
Is there some reference, some document which refers to this?
Thanks in advance,
Samantha.
Message was edited by:
Samantha Núñez

Samantha,
From the Same CRM system you want to send to XI 3.0, & PI 7.0 is not possible because, while sending proxy can send to either one but not both because while configuring the XI adapter(which you use for Proxy) you can specify only one.
--Archana

Similar Messages

Not able to connect CRM Online to PowerBI

Not able to connect CRM Online to PowerBI, Please let me know if you have an idea to resolve this issue.
oops, something went wrong
Failed to update model parameters
Activity Id59a2a854-8e34-6636-0679-3d2e245d2241
Request Id9b7fa606-324e-4ec8-495f-13f91d03bc54
Error Code400
TimeWed Mar 18 2015 21:24:18 GMT-0400 (Eastern Daylight Time)
Version11.0.9165.945
Cluster URIhttps://wabi-south-east-asia-redirect.analysis.windows.net

Hi Kiran
Please chcek the Note 1359600-MDM stopped communicating after upgrading to 7.1.03 from SAP NOTES.
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1359600
SAP Note Description:
Summary
Symptom
MDM components stopped communicating after upgrading to 7.1.03
Other terms
TCP ports, Firewall, connection, network, SP03, SP3, 7.1
Reason and Prerequisites
Starting from version 7.1.03 the MDM suite is using different TCP ports for its operations. The change was in order to be compliant with the Internet Authority for Numbering Assignment. Port numbers changed as follows:
Application Old Port # New Port #
MDS 20005 59950
MDLS 20008 59650
MDIS 20009 59750
MDSS 20010 59850
If firewalls were configured to allow MDM's communication throughout the landscape, they actually might prevent (depending on their rules table) the communication after an upgrade to MDM suite starting at version 7.1.03 and higher.
Solution
Revise the firewall rules such that they will allow the communication according to the changes described above.
In order to check that the ports are allowed to pass trough the firewall a telnet test could be done like so:
1) Open a terminal window (on UNIX) or a command window (on Windows) on the same machine which hosts the application which tries to connect, and issue the following command:
telnet <MDM server host name or IP address> <TCP port to test>
2) If no error response is received than it means that the TCP port is allowed to go trough.
3) Repeat steps 1,2 for all the other ports need by the application.
Thanks
Sowseel
Edited by: sowseel pasumarthi on Jan 18, 2011 6:36 AM

Icloud encountered an error while trying to connect to the server' what does that mean?

icloud encountered an error while trying to connect to the server' what does that mean?
I am trying to get my contacts back by following a step by step guide online, but the falling at the first hurdle! trying to get into my icloud account on my pc?
Can anyone help?

never mind the problem is gone this morning.

My nano says connected eject before disconnecting what does that mean

I plugged my new iPod nano in a couple hours ago and it says "connected eject before disconnecting" what does that mean?

Hi Yogibear2,
Thanks for visiting Apple Support Communities.
This article has some information on the topic:
Safely disconnect iPod
http://support.apple.com/kb/ht1853
When iPod is connected to a computer there are times when it should not be disconnected by simply unplugging the USB cable. In these cases, iPod must first be ejected before it can be safely disconnected. Read the information in this article to determine when an iPod can be safely disconnected.
Best,
Jeremy

Cofig guide for connecting CRM and R3 system

Can anyone provide full cofiguration guide for connecting CRM and R3 system from end to end.
also complete information about bdocs settings in Adminstration console.
regards,
Sunil

Hi
Please follow the link
http://help.sap.com/saap/sap_bp/CRM_701_XX/Html/index.htm
then go to the following hyperlinks
B01: CRM Generation
B09: CRM Customizing Replication
C03: CRM Master Data Replication
Meticulous follow these three documents then you will be able to connect CRM AND ECC systems and will be able to perdorm initial load of customers, materials etc
please let me know if you have any issues
thanks
Ananda kumar karri

How to pass MS CRM credentials from a config file to connect CRM from SSIS?

Hi All,
Can anyone please help me with the below requirement?
I need to connect to Microsoft CRM from SSIS which is handled by a CRM proxy. However, configured the credentials in the code (hardcoded in script component) with respective MS CRM details.
Question: How can I pass my CRM credentials from a config file to my script component in SSIS to connect CRM?
Thanks & Regards,
Sri

I used variables to pass the user and password details to my
crm Script Component Destination and those variables can be filled by a regular config file or table.
public override void PreExecute()
base.PreExecute();
// Fill .NET variables with values from project/package parameters/variables
CrmUrl = this.Variables.CrmWebservice.ToString();
CrmDomainName = this.Variables.CrmDomain.ToString();
CrmUserName = this.Variables.CrmUser.ToString();
CrmPassWord = this.Variables.CrmPassword.ToString();
// Connect to webservice with credentials
ClientCredentials credentials = new ClientCredentials();
credentials.UserName.UserName = string.Format("{0}\\{1}", CrmDomainName, CrmUserName);
credentials.UserName.Password = CrmPassWord;
organizationservice = new OrganizationServiceProxy(new Uri(CrmUrl), null, credentials, null);
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter

HT1498 when i got to rent a move it tells me that unable to sign in . cannot connect to server. what does that mean

Can someone help me. I have gone to rent a movie as usual andit tells me that I am unable to sign in. Cannot connect to server. try again later. what does that mean
does anyone have an answer please

if other internet services such as youtube also don't work then it mean that your appletv don't have connection to the Internet
it could also mean that apples server er busy or receiving service and will be up again later

HT201263 i need help getting my iphone unlcocked. i jsut got it from a friend but when i turn it on. it says iphone is disabled connect to itunes. What does that mean and what do i need to do??? HELP PLEASE!!!!!

I need help unlocking my iphone 4s. i jsut got it from a friend today and to unlock it i need help. when i turn the phone on it says iphone disables connect to itunes. What does this mean and what do i need to do to get my phone on??? HELP PLEASE!!!!

sriggins wrote:
What does this mean and what do i need to do to get my phone on??? HELP PLEASE!!!!
Pretty self-explanatory, don't you think?
It means just what it says...connect your phone to your computer and launch iTunes

ITunes network connection has been reset: Anyone know the meaning?

Within the past 2 days I have started receiving a "Network connection has been reset" error message when trying to purchase new apps or updating already purchased apps. Does anyone have better insight than I into its meaning and purpose? Thanks!

+I have dial up so i don’t know if this might be causing the problem, is there anyway to fix this?+
Sounds like the dial=up connection is dropping. My advice is to get it from a friend's house that has high speed internet. Put the iTunes Setup.exe file on a USB memory stick, take it to your PC and drag it to the desktop. Then run the install.

Step-by-Step Guide for connecting CRM with SAP R/3 system Server

Hi Experts,
For my ongoing project , I am in the need of connecting the CRM server with
SD server.
Can u share any Step- By Step guide for doing that.
I know that the RFC connection has to be established between the system.
Logical system must be create and all such stuffs.
It is definitly helpful, If u can help me out.
I would to thank, appreciate and reward for your help
Best Regards,
Maniprabu

Hi Mani,
Follow the following steps :
1. Create RFC destination for both the systems on CRM and R/3 in SM59.
2. Create the logical systems and assign clients to logical system in SALE transaction both on CRM and R/3.
3. Create a user in the R/3 table CRMCONSUM with the name CRM.
4. Maintain the Middlware Parameter tables on CRM : Table SMOFPARSFA:
   Create an entry for following parameter entry:
   Key - R3A_COMMON
   Para name - CRM_DEFAULT_DESTINATION
   Value - R/3 logical system
5. Maintain the parameter tables on R/3 system : CRMRFCPAR, CRMPAROLTP
    CRMRFCPAR :
    Create new entry with following data:
    User - CRM
    Object name - *
    RFC Destination - RFC destination for CRM
    Load types - All Load Types
    In Queue flag - X
    Send XML No XML
    CRMPAROLTP :
    Create the following parameter entry:
    Para name - CRM_DEFAULT_DESTINATION
    User - CRM
    Value - Name of the CRM logical system
6. Create Sites and attach subscriptions in Admin Console : Tcode SMOEAC
    Create a Site as CRM and another as R/3. Attach the required subscriptions to the R/3 site.
7. Register the queues in SMQR and SMQS transactions.
PS : For detailed steps refer the Middlware Base Customizings(CR500 and CR100)
<b>Reward points if it helps.</b>

Problem in connecting CRM to SAP R/3 plz help

Hi friends,
I am ravi. I am facing problem making connection between CRM to SAP R/3.
In my pc i installed ECC 5.0 version and CRM 4.0 in Windows 2003 OS.
He installed CRM server in Virtual Mechine of OS, and ECC 5.0 in normal mode.
I am starting two servers simultaniously while starting VM and i am working with both
but i am not able to maintain connection I tried but failed. he installed login pad in
normal OS. What have to maintain to make connection between these.
Please help me.
Thank u,
with regards,
Ravi

Hi,
I used the following Steps to do the process..
1. Created a logical system in R/3 and CRm Server.
2. Created a RFC destination in both server.
3. Assigned an RFC user.
What is the next step I need to proceed. I struk up with the following steps.
1. Transaction EWFC0( Configure Action Box)..Created the transaction group (J1f), Created the transaction J1FM.J1F is the namespace for my ADD-ON in R/3.Selected BOR.Given logical system.It asks for the object type and method.
My doubt is,
What object type to be selected or Do we need to create the object type for customer specific transaction...if so where?
After assignening what are the steps I have to do.
Please help me.
Thanks
Mani

Problem Create System Object in the Portal for connecting CRM abap

Hi, i creating system in the portal (JCX) for connecting system ABAP CRM (CRX), after create system try run test connection and show messages error:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
In the logs the portal (NWA) show messages:
Failed in creating the JCO Connection.
The logs operation system (log Security_audit.log)
Error> occured >Thu Jun 23 11:34:41,278<RfcException: message: 'mshost' missing Return code: RFC_INVALID_PARAMETER(19 Return code: RFC_INVALID_PARAMETER(19)    error group: 101 key: FC_ERROR_PROGRAM
     at com.sap.mw.rfc.api.RfcOptions.checkParameters(RfcOptions.java:438)
     at com.sap.mw.rfc.api.RfcApi.RfcOpen(RfcApi.java:688)
     at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1079)
     at com.sap.mw.jco.JCO$Client.connect(JCO.java:3256)
Plase help, any idea?

message: 'mshost' missing Return
During the System Object Creating in System Landscape, there is any entry as Message Server Host: CRM MS HOST
and Message Server Port : sapmsSID and add this entry in etc/services --> bottom samsSID 36NN/tcp where NN is instance number.
Try this and let me know.
Thanks
SM

How to connect CRM 7 to Java Backend? Test?

Hi All:
How do I connect the CRM ABAP stack to an installed standalone (as per install guide) stack? I have followed the install manual but I still do not see how the connection is made!
How do I test this connection to know whether it is working or not? (ABAP CRM calling something in Java CRM component)
Also how do I attach my installed TREX?
Thanks
Tony.
PS: I have already followed the respective install guides as well as post install section of the guides.

Hello ,
Please check the guide from the link http://service.sap.com/instguides
Installation Guide
SAP CRM 7.0 Java on Windows: Oracle
Based on SAP NetWeaver 7.0 including Enhancement Package 1
PUBLIC Document version: 1.1 ‒ 02/05/2009
Section: Page 98
5.20 Checking the Availability of Back-End Systems for CRM Java Components
After the installation, you have to check the availability of back-end systems as follows:
1. To test the connection to the ABAP back-end system, you create a back-end user [page 99].
2. Depending on various business processes, you check the following back-end systems:
ABAP system [page 100]
TREX Server [page 102]
http access to eBay (selling via eBay processes only) [page 102].

What is the Best way to connect CRM Case Management with EP-KM?

Hi Gurus,
We will implement a Case Management in CRM 7.0 EHP2 and EP 7.31 with KM.
The Client needs Clasifications and Search of the documents in Case Management, the number of documents could be 1,000, 000 aprox...
I thing are 2 options :
1) The documents are stored in CRM Repositories, and KM access him, (I know this is posible using WebDAV repositories), but I do not know if this could affects in some way the process in Case Management. And if CRM repositories can store the huge volume of documents.
2) The documents are stored in KM Repositories, and CRM access him.
     -¿Is this posible?.
     -¿CRM can access the documents without problem?
     -How can store the documents to KM on line from CRM Case Management?
What is the best solution?.
Please Help.
Best regards.

Hello quinstar,
It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
HT4356 Can I use personal hotspot as wifi to connect printer?
https://discussions.apple.com/thread/4007254
Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
Thank you for using Apple Support Communities.
Take care,
Sterling

Connect CRM multiple clients to ECC

Hi SAP Gurus,
I have one Question regarding CRM->ECC connectivity.
Will it be possible to connect multiple clients of CRM to ECC ? Like more than one client can talk to ECC ?
Because in BW we can not connect multiple clients to source system ! does this true with CRM also or not ?
Thank you

1) As datasources are client independent so do we need to activate the datasources (like 2lis*) in all clients one by one? or just activating in one client will make it ?
You need to activate the datasources individually for all the client. If you will activate in one client, it will be specific to that only
) If we replicate the datasources for new clients in BW side and then want to reload the data from New clients (set-up tables filling and INIT)?would it have an affect on existing deltas (for datasources 2lis*)for existing Source client 100? What shud be the precautions? How we can proceed?Please let us know your opinons plz
If you will replicate in one client system, it wont affect delta and init from other client.
One thing you can do, to identify data from different source systems, you can use source system compounding in your infoobjects. Make sure you are not loading data from both the client at the same time. it may lock the DSO and master data.

Connecting CRM to PI 7.0 by means of SPROXY

Similar Messages

Maybe you are looking for