Connecting deleted video to audio track in timeline

I have made a narrative using audio, and I deleted the video sections. I want to re-connect the corresponding video to the audio, but cannot find a way to do this.
Help would be most appreciated!
Thanks

If I understand you correctly this audio finds its origin in a clip holding both audio and video. And now you are looking for the corresponding video?
If so, select the audio in the timeline. Navigate the pointer over it and press "f". This matches back to the original clip in the viewer. The viewer will open with the Audio Tab selected ("Stereo or Mono", but in the top of the viewer you can select the Video Tab. From there you can edit the video into the timline...
Rienk

Similar Messages

  • When I drag a synchonised clip to timeline, can I turn off the video's audio track only without breaking apart clips?

    I have preparred many clips by synchonising them with audio recorded on H4N - and have these in keywords.
    When I drag them to the timeline, do I have to break apart each clip item to turn off the video's audio track or is there a shortcut to doing this?

    For each clip you can go to the audio portion of inspector and uncheck/disable the tracks you don't desire. That would take longer than Tom's method, but I think the audio won't show up as a blank later on.

  • Video/Stereo Audio tracks won't edit together

    My video and audio tracks no longer edit as a (linked) unit.
    For example, when I select a clip in the timeline and apply the razor tool it only affects the video track....then I must also select the audio file and apply the razor tool again.
    I notice this is now a condition with any FCP project I open...so I am guessing it is a Preference issue. Somewhere along the path, I must have changed something...but haven't found the way back and I am sure there is a simple solution.
    I am using FCP 4.5
    Any suggestions will be appreciated.
    ron

    Your clips are coming into the Timeline unlinked. Click the link toggle button near the upper right corner of the Timeline window and then bring your clips in.
    -DH

  • Video and Audio Track Destination in FC Pro

    Sometimes my Source Bar (In the Timeline) doesn't allow me to execute it. That is in the video and audio tracks.
    g-5   Mac OS X (10.4.6)  

    Hi there,
    I just came across this problem. I had a clip in the viewer with video and audio and a sequence in the timeline. But somehow FCP wouldn't let me edit the video into the timeline, I couldn't patch the video.
    So I opened up another sequence. Same thing.
    Third sequence, and the video track selector miraculously appears.
    Any ideas? After I quit and restarted FCP, it all worked normally.
    Tales from the not-so-far-side, I guess.....
    Cheers,
    Colin
    PowerMac G5 2.5GHz DP and PowerMac G4 500MHz DP    

  • Can I link and lock video and audio tracks - layers - as in Photoshop?

    I'd like to link and lock entire clips of video and audio tracks, as I might in Photoshop, so that I can insert some material ahead of this group without having to move each separate tack in my timeline. I have a group of clips which works well together now, and it would be so nice to be able to link them, lock them together as on unit, and just insert the new material into the timeline ahead of this piece. Any ideas?

    alann
    What version of Premiere Elements and on what computer operating system?
    For now, a generalized Premiere Elements Windows answer.....
    You would select all the clips (all at one time) that you want to move together, then Clip Menu/Group.
    Or right click anywhere in the selection to bring up the pop up menu including the Group option.
    Have you been there and done that yet?
    Please supply more information so that we can fine tune the information that you seek.
    Thank you.
    ATR

  • Independant video and audio tracks separate

    I am using Premiere Elements 12 on a PC. I am working on a multimedia project combining video, stills and audio. Independant video and audio tracks separate when I insert a still image on another track. The tracks are not grouped or linked together. I do not know how to prevent this happening. The manual suggests pressing the Alt button when inserting but this does not work.

    skinnymurray
    Holding down the Alt key of the computer main keyboard does work and works well under most ordinary conditions. Please practice and refine your Alt technique with care patience. But....
    Have you tried keeping certain parts of your established track content together by using the Group command after selecting a
    bunch of clips all at one time?
    Please review the following free online video tutorial which I post for informational and non promotional purposes
    https://www.youtube.com/watch?v=IqRT8OzdxVc
    I am having a lot of trouble with Internet connection today due to local storms. The above link was snowy when I viewed
    it but it should be OK if your Internet connection is OK. I will monitor this situation. The information given in that video tutorial relates to your question.
    We will be watching for your results.
    Thank you.
    ATR

  • Hello All... Back after a brief absence, things look a little bit different. I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I'v

    Hello All...
    Back after a brief absence, things look a little bit different.
    I'm trying to take a 16 minute mini dv video and compress it for use on the web. I'm interested in any suggestions you may have on settings for the video and audio tracks. I've tried using Sorenson 3 (15 frames, key frames set to automatic, 320 x 240) for video and IMA 4:1 (mono) for audio. The resulting video looked great but the file size came in at about 255 Mb.
    Thanks!
    PowerMac G5 1.8 Dual   Mac OS X (10.4.3)  
    Message was edited by: Dan Foley

    Thank you for the replies.  Everyone was correct about the jack, interface, and phasing problems.  I have been unplugging my motu audio interface and then using headphones at work.  I have not changed any detailed audio output settings in logic.  When I read that the jack might be a problem I tried switching headphones.  This actually helped.  I am using dre-beats headphones and they seem to be having issues with the mac/jack-(the phasing/panning problems.  I can use these headphones with other devices but not the mac.  I have to use ipod ear buds and the phasing seems fixed.  Hopefully this information is helpful to someone else. 
    If anyone knows how to correct this issue please let me know its difficult to know what my final mixes are going to sound like and I have had to keep bouncing everything into i-tunes- sync to ipod and then listen in my car radio. 

  • Can't play Video and audio tracks.

    What software components are necessary to play the video and
    audio tracks on OTN.
    I'm using Windows 2000.

    Most of the iDevelop 2001 videos and audios require a Real
    Networks player.

  • How many video and audio tracks now?

    If there is one single bad thing in iMovie is the lack of tracks. Most "consumer editors" would like at least 3 sets of stereo audio tracks and the titles would be nicer on a separate track. But in the iMovie site there is no mention to those things. Strange, every video app site has some specs about video and audio tracks, even the free ones.

    Hi John,
    Unfortunately the iMovie '06 has the exact same arrangement as '05: One video track and two audio tracks. I was so badly hoping for at least a second video track in the new version because that makes things so much better, but for some reason they didn't add one. They probably know that less people would shell out $300 for Final Cut Express if they added a second video track to iMovie. sigh
    A big disappointment.
    ~'kito

  • Combining Separate Video and Audio tracks

    Hi, what's the best way to combine a video and audio tracks into a single file? We will be given the video and audio from 13 volleyball games, and each game will be coming as a file.mpg (mpeg2) video and an mp3 file.
    We're looking for a way to either manually bring it in, or bulk automate a way of combining the two tracks for each game to have one file that is in a format that doesn't need to be rendered in FCP.
    Thanks!

    Seems like there should be some way to combine clips somewhere though? < </div>
    Not if they're form separate devices or in different codecs. the MPEG2 files are the big problem, next time, have your people shoot conventional DV and use the audio interface to bring in a feed from your announce booth or radio station or whatever so it's in sync.
    bogiesan

  • Video and audio tracks not synchronized after importing

    When I try to watch a video in quicktime or itunes video and audio tracks not synchronized. If I wach on another player they are synced. Anyone help?

    John:
    Thanks for your reply.  Excuse my referring to you as "Kevin".  I'm new to the Adobe Community.  I have also referenced another article which is seemingly a bit easier to fix for such a non-technical woman like myself.  I'm going to try both solutions.  Whichever works I'll be sure to reply to the thread with my findings.  I found this article which provides the following solution:  http://blog.flickharrison.com/2012/04/problem-solving-in-adobe-premiere-audio-glitches-and -sync/

  • Video and Audio Track Selection

    Is there any quick way to do this? Nothing in the keyboard shortcuts menu that seems close to "Sleect Video Track 1", "Select Audio Track 1", etc. Is it only achieveable with a mouse? Thanks all.

    I have made custom keyboard shortcuts for video and audio tracks using Toggle Track.
    I use numbers 1 to 7 for Video and Shift 1-7 for Audio.
    In conjunction with Mouse clicking and shift mouse clicking on tracks..does all that I need.

  • Is it possible to group video and audio tracks separately in the timeline?

    Currectly tracks are ordered like this:
    video
    audio
    video
    audio
    video
    audio
    Can I arrange them to look more like:
    video
    video
    video
    audio
    audio
    audio
    Since I get to use both Premiere Pro and Final Cut Pro frequently at work, I would find it more natural if audio and video were grouped separately.

    You are welcome.
    I find it interesting, as about 10% of the users of PrE would like to arrange the Audio & Video Tracks in the form of PrPro, however, about 10% of the users of PrPro would like to arrange them like PrE!
    Personally, I find the PrPro arrangement (as you were requesting) to be the most logical for my workflow. I do my Video first, and like all Tracks grouped atop the divider line, and when done there, move down to my Audio. I still get lost and confused in PrE, because of the grouping there.
    Now one little tip, that might help you a bit: one can Add, or Delete Tracks pretty easily. I have a Sequence (think multiple Timelines in PrE) Preset that gives me 4 Video Tracks, 1 mono Audio Track, 4 stereo Audio Tracks, and a DD 5.1 SS Master Track. This is the "average" of the normal Timelines that I work with. When doing an edit, where the extra Tracks are not needed, I choose Sequence>Delete Unused Tracks to "clean" things up a bit. Then, I am only looking at Tracks (Video and Audio) that are in use.
    Good luck,
    Hunt

  • Invisible audio tracks in timeline

    I've been working on a music video, so I've got multiple video clips in my timeline, but I've unlinked them from their original audio files and subsequently deleted the audio tracks they were assigned to. The only audio track I've kept is the original mp3 I am using. This was inserted on the audio track named "Soundtrack". For some reason, this track is no longer visible on my timeline. My Video tracks 1-7 are visible, but no audio tracks whatsoever. I can hear it fine and adjust it in the audio mixer, but I can't see it. Any idea how to get it back?
    NB: When I create a new sequence or project, the audio tracks are visible as usual. Just not in the sequence I'm working on. Also, if I add a new video clip with audio attached, I can preview the video and hear the audio, but again- the audio track isn't visible on the timeline. Please help! This is highly annoying...

    Are you using PrElements? PrPro does not have a "Soundtrack," but PrE does.
    My guess is that you need to scroll up/down in your Timeline, and you will find the phantom Audio Clip(s).
    Also, here is the Premiere Elements Forum. Maybe the MODs will move this post to that forum, if you ARE on PrE.
    Last, some users of PrE have had problems with both Soundtrack and Narration, the two fixed Audio Tracks. When this happens, I recommend that those Clips get moved to a free, regular Audio Track.
    Well, one more: I always convert any MP3 files to PCM/WAV 48KHz 16-bit, before Import. Many MP3 files can cause issues. I use Adobe Audition, but the great, free utility, Audacity, can do this too.
    Good luck,
    Hunt
    [Edit] The word "Sequence" indicates PrPro, and NOT PrE, so I was wrong about the program. In either program, look for the scroll bars to the far right of the Timeline Panel, and just scroll.
    To control the placement of Audio Assets, one thing to think about is that your source footage will determine which Audio Tracks will be available. The channel-count MUST match. A 1-channel source can ONLY go onto a 1-channel Audio Track. If you have Audio, that you do not want disturbed, just Lock that Track (note: ONLY in PrPro, as PrE does not have Track Locks).
    Message was edited by: Bill Hunt - Added Edit

  • Splitting video and audio tracks

    Hi folks!
    I'm a newbie to the whole world of mac and this is my first time using imovie. What I am trying to do is to split the video track and keep the audio from it and run that over another video track, then come back to the original video track... so basically putting in a cut-away... is this possible with imovie?
    Thanks for any help you can give!
    Kate xxx

    Hi - I was getting help from someone else on this aduio issue - and saw this post, so hope you don't mind my asking you too -
    I extracted the sound out of a video clip. The track of sound got put doen below the clip, like it should. And it zerod out the original clip audio as it should.
    The 3rd audio track is a separate song, that plays over the video track. When I play the timeline back, all is fine. But when I record the dvd [and I have tried over 20 times in various ways this week], even though the preview [I am using Toast 6] shows the movie playing right, when the recorde dvd comes out, the audio that I extracted and deleted, still plays. [and the song plays right, but is suppose]. I have clicked on the video clip, and it shows 0% ...
    ANy thoughts? i movie 5, G4 [ps - I've made movies before and haven't had trouble]

Maybe you are looking for

  • How do you use a main applet to call other child applets?

    Hello Everyone! I have created three separate applets that animate different colored walkers that walk across the web page with each applet doing what I need them to do. I need to create a main applet that displays a component that allows the user to

  • Many Songs No Longer Sync From iTunes to my iPhone

    I look in the folders in iTunes Media/Music and they're still there, but they are no longer on my iPhone or iPad and I can no longer sync them to these devices. Some of these songs I've had on my devices for years. This started when I tried to update

  • Domestic Sales Order with reference to Export Inquiry

    Hi All, I have a different type of requirement. Document Types: IN10-Export Inquiry IN20-Domestic inquiry OR10-Export Order OR20-Domestic Order The Inquiry(IN10) is created for Export Customer, Later they have some problems with export Customer then

  • SONG WONT PLAY ON ITUNES

    on march 24th i believe or recently i purchased the new KIP MOORE CD. and it is amazing. and been listening to it non stop ever since. well just last night when i was listening to the cd on my ipod i realized the first song kept getting skipped. so w

  • ChaRM: Two Virtual Systems?

    Hi Experts, It is possible to have two virtual systems in a ChaRM three tier landscape? DEV -> Virtual System 1 -> Virtual System 2? This is because only DEV is available now with QAS and PRD following in the future. Thanks! Best Regards, Karl