Connecting directly from ECC 6.0 to a 3rd party system with out XI ?

Hi Guys,
we have developed soap-soap scenarios in XI and we are sending the data from ECC 6.0 -> XI ->3rd party webbased system.
Due to some security reasons we are looking for options of doing the same with out XI ie directly from ECC 6.0 to 3rd party system.
can somebody explain or provide the links for doing the direct connection and also suggest the advantages and disadvantages of eliminating XI completly from the design
any hep would be really appreciated
Thanks,
Srini

HI,
Yes, using standard Enterprise services from SAP you can communicate with 3rd party systems also,
Even you can configure the HTTPS communication with R/3 to 3rd Party system. For this you need to install the client Certificates and have to use valid User ID and Passwords.
http://help.sap.com/saphelp_nw04s/helpdata/en/3a/7cddde33ff05cae10000000a128c20/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e8/1f1041a0f6f16fe10000000a1550b0/frameset.htm
Disadvantage of communication without XI
1. XI provides the re-usability concept. i.e. if you have just R/3 to 3rd party and tomorrow you may need to add another 3rd party or sap system to communicate, then you just re-use the existing scenario.
But in case of direct communication is leads to point-to-point connection.
2. R/3 can't directly support to the open Standards, either you have to use ABAP proxies or RFCs to convert it to XML format. But XI is an Centralized Integration Platform with Open Standard. In current world, Openness is important.
3. XI has the Ability to communicate with other messaging systems/products may be JMS or any other 3rd party systems also which has the limitations with direct communication
4. Complex processes for communication possible instead of only sending and receiving (business process management) (connect e.g. asynchronous and synchronous steps, define complex communication scenarios)
Mapping etc possible to accomplish in Java. Platform independent Java components.
5. XI has Java & .Net support. which is not possible with directly R/3
Thanks
Swarup

Similar Messages

Do thumbnails show in Bridge CS5 if connected directly from a DSLR (via USB cable)?

I have a D90 and none of my thumbnails for my files show in Bridge CS5 when connected directly from the camera. This includes ALL types of files (JPEG, NEF, etc). It shows the thumbnails when I use a card reader though. Is this common with DSLRs?

If you have—misguidedly and unfortunately—done that already, first back up the image files on your computer, then immediately format the card in the camera, which will erase everything in the card and format it to a fresh, pristine state.
What ever possessed you to do a thing like that?
Had you done that to the card containing the raw files you can't open?
Do not be fooled by what the camera shows you anyway. The preview you see in the back of the camera when chimping* is not a preview of your raw file at all, but of the embedded JPEG that the camera creates right after you shoot and records inside your raw file. The histogram it shows you in the camera is not based on the raw data at all either, but on said embedded JPEG.
The same is true when you review or playback the images later on the LCD display in the back of the camera.
*Chimping is a colloquial term used in digital photography to describe the habit of checking every photo on the camera display (LCD) immediately after capture.
The phrase is most likely derived from comparison between the sounds and actions some make while reviewing images and those of an excited primate (Oooh! Oooh! Aaah!), or when a photographer is completely absorbed in the act of analyzing, admiring or proudly displaying a shot to others.
From: http://en.wikipedia.org/wiki/Chimping
Oy!

Connecting directly from my modem to XBOX 360 Live Please Help me.

Please help me I keep getting the message on my Xbox live that I can connect but that I have moderate nat. You see I play Final Fantasy online using Xbox live and I keep getting disconnected in the game..every 10 minutes..exactly. It's really annoying. The problem has to be the NAT.
I connect directly from my modem to the Xbox 360. I have no router. My modem is a Westell 6100G that's what it says on the front. On the bottom of the modem it says: Model: G90-610015-20. My connection speed is 1 MB.
Please someone help me if I need to reconfigure the modem. I do know how to get into the modem reconfiguration web page but don't know what to do in there. Please help.
Solved!
Go to Solution.

jdomi78 wrote:
OMG thank you so much! that worked.
What worked? I did not tell you to anything else, other than look at FAQ and answer my question. Huh?
jdomi78 wrote:
The first poster...and what happened to his post? was it deleted?
Huh?
When replying, use the View discussion in a popup feature.
For example, as you can see in the screen shot my last post in this thread seems to disapper when replying.
http://i34.tinypic.com/123vzno.jpg
But it did not really disapper.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Problem connecting wirelessly from iMac to NETGEAR router, get invalid password message with WPA and WPA-2 encryption in place but if I remove them, so no security, can connect without a problem. Help!!

Thank you for your suggestion but I have already had a couple of phone sessions with NETGEAR support and they don't see any problems with the router settings etc. They referred me to Apple support, who helped me discover that it is possible to communicate with the router but only if I turn off the encryption/security software, which I don't want to do. The frustrating thing is that I can connect wirelessly from a laptop running Windows 7 and two Anroid smart phones, with WPA-2 in place, without a problem. Do you have any other ideas?

Extraction of data from ECC to 3rd Party systems

Hi All,
I want to know all the options available for extracting data from ECC to a 3rd party system (custom datawarehouse like Teradata, hyperion etc). Also, I want know if there is a best practice documentation available for extraction of data from ECC to any 3rd party system?
Thanks,
SB.

Hi SB,
Check the following link
http://expertisesapbi.blogspot.com/2010/06/how-to-transfer-data-from-sap-system-to.html
Ranganath.

I would like to know if I can have FCP maker names be the same as what appears in field, master comment 1. I am importing these makers from a 3rd party system

Hello, I am importing logs from from a 3rd party system. They come in as markers into FCP. The log comments come in under master comment 1. Is there a way to re-map this so master comment 1 appears where the maker type is shown.

That's like the 00-th post that asks for the same thing: digital connection of the Creative soundcard to a receiver.
Yes, you can connect the card via a jack situated on the back of the card - you just need a cable with stereo minijack and RCA. All the older Creative cards (since Li've!) have that SPDIF output on the back, on the form of a mini-jack. It is labeled as "digital".
The ONLY problem is that you will be able to send surround sound via SPDIF only if it is encoded DD or DTS on a DVD-ROM. The card itself will not encode surround sound CREATED in the PC. So, games, mp3's, CD's all will be stereo PCM. I guess that your old MoBo SPDIF was in the same situation (except for a SoundStorm integrated from nVidia that does DD 5. encoding on the fly). If you don't care about gaming performance, Turtle Beach make a card that does DolbyDigital encoding on-the-fly - they are calling this Dolby Digital Li've.
About mikes: one mike input is existing on the back of the card, and another one on the expansion bay (if you have platinum version). both of them will take only a el-cheapo (electret/condenser mike), not a proffesional one.
Message Edited by SoNic2367 on 04-24-2006 2:47 PM

Distribute different versions of data to 3rd party systems from SAP ERP2004

Dear fellow SDN users
I am working in a large retail company where we are about to implement a new store system. The new system should be implemented in phases, where each phase covers one or multiple countries. Until the implementation is complete, our old store system should still be supported.
My problem is that we also need to support multiple versions of the systems, which is something we have never done before. Do any of you guys have any experience in how to differentiate versions of the data being sent from SAP to 3rd party systems? The scenario today is:
SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1
And the scenario we would like in the future:
SAP ECC 6.0 -> SAP PI 7.0 -> STORE SYSTEM1/STORE SYSTEM2
(Where it is possible to send several versions of data: e.g. ARTMAS ver. 1 to SYSTEM1 and ARTMAS ver. 2 to SYSTEM1 and ARTMAS ver. 1 to SYSTEM2)
The first thing that came to my mind was to differentiate on IDOC extension and then program different routines per extension when sending the idocs, but I guess there should be an easier way.
Any idea is greatly appreciated.
Best regards,
Chris

Hi Chris
I guess it depends on how the information you want to send to various partner systems differs, but have you considered using reduction?
I am at a client currently where we need to send similar information to a number of systems - for example Customer information using the DEBMAS message type, is going to three seperate systems.
To do this we defined 3 reduced messages - Tcode BD53. This not only reduces the load placed on PI/whatever middleware system is used by eliminating unnecessary data from each message variant, but allows the message to be treated differently by PI, using different data mappings, distribution models etc.
Hope this helps

Webinar- Connect Third Party Systems with SAP B1 – DI API, DI Server, B1WS

Webinar happened on 21st August.
Get the Presentation, Video recording and answers of all the questions asked in the webinar through the below link.
Webinar- Connect Third Party Systems with SAP B1 - DI API, DI Server, B1WS

Hi Oleksiy,
I don't see anything strange in your code. You should receive an error message but it shoudn't loop without end ;o(
The only thing I can propose you is to create a message for support, they will have a deepest look into your problem.
Regards
Trinidad.

Recipe data migration from 3rd party system to SAP Recipe Management

Dear All,
Can anybody give the steps to be followed to upload Recipe data from a 3rd party system into the
SAP Recipe Management (RM). I am looking for the logical process to populate the RM tables.
Thanksa lot in advance,
Regards,
Achyuta

As I known , there is a interface tool named as IDOC.For more information , please ask your abap team.

1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Can I Test the Test Package Created in SolMan Directly from ECC?

Hi,
the test plan and test packages are created in Solution Manager. The Test Packages are comprised of transactions (on ECC).
(The business scenarios and processes are defined in Solar01, ECC is defined as logical component and assigned to every tx, the test case description is uploaded in Solar02,...)
The needed Trusted RFC (to enable the tester to start the tx from within SolMan) is running late, but I can see that STWB_WORK tx is also available in ECC.
Of course - when I open it in ECC (logged on as a test user - defined in test package in SolMan) the test package is empty in ECC.
What kind of connection is there within STWB_WORK in ECC and SolMan?
Can one somehow "transfer" the packages from SM to ECC, so the tester can start to test the transactions from ECC directly?
Is it possible to see the results and status overview in SolMan during and after testing?
Thank you in advance,
cheers,
Nenad

Hi
You getting confused between old ECC test workbench and Solution Manager Test workbench.
Test workbench is present there from r/3 version onwards.
When you are performing testing via solman then you have to use the test packages assign to you in STWB_WORK which has the relevant transaction and doc for you to test
here you upload the test result and update status .Later any PM can generate report for overall testing including entire landscape and not one system.
But remember it has got no connection to ur r/3 workbench
The diff between 2 is...solman test workbench is for entire landscape including BI R/3 ECC any other system ...but in r/3 etc the workbench is alone and obsolete now is used for standalone testing.
Hope it carifies ur doubt completely
Regards
Prakhar

Navigating directly from ECC(ABAP) to CRM UI Work Center/Link

Hi gurus,
I tried searching and couldn't find a relevant answer so I hope someone can help. We'd like to go directly from an ECC custom transaction we use to view our inventory and navigate directly to a specific work center/logical link within the WebUI that will display some custom development we've done to streamline the quote entry process. Parameters are passed from the inventory transaction and then pre-populated into a custom screen we developed.
I've seen tons of documentation on launching R/3 transactions from within WebUI and I know how to go directly to a specific object using a formatted URL but I can't find any info on going directly to a specific work center menu entry and/or a direct logical link from within ABAP.
Can anyone shed some light on this? Thanks in advance.

Hi James,
I am working on some navigation issue myself and posted [this|Direct URL access to a component usage; in the forums today. It might just help you:
SAP has at least some documentation on this one. It is freely available form the [Service Market Place|https://websmp203.sap-ag.de/crm-inst]. [DirectLink|https://websmp203.sap-ag.de/~sapdownload/011000358700001715762008E/Cookbook_Ex_Comp_CRM2007.pdf]
In the document mentioned above is a way to create a URL to the WebClient directly opening a specifc UI Component in the UI Frame.
You could even open this one in an HTML control inside your transaction.
cheers Carsten

Error Connecting Gateway from ECC

Hi All,
We are trying to configure connection from ECC to Gateway but getting following error. I have having SAP ALL access:
No authorization to log via a trusted system (L-RC =0 T-RC=2).
Please advice on this..
Regards
Rajesh

Hi Rajesh,
Yes, As suggested Derek in the target system must have Auth S_RFCACL.
Thanks,
Syam

Can i connect directly from my cable internet connection, or do I require a cable modem?

I would like to se up a home network using my cable internet without having to rent a cable modem from my service provider. Can I use a Time Capsule to connect directly to the cable internet, or do I need the modem to establish the connection before using the time capsule to create my network?

The Time Capsule does not have a modem onboard. You will need a modem if you want to be able to connect to the Internet.

File as an attachment from ECC to PI then to third party

Hi Experts,
We are having resume parsing functionality in SAP e-Recruitment. The users are uploading their resumes on SAP Enterprise Portal. We want to transfer resume files in .pdf or .doc format from ECC to Parser server (third party) through PI. This file will be sent as an attachment to the receiver Webservice or HTTP User link.
So what configurations should be done in ECC and PI both? What adapters should be used at sender and receiver both ends. Kindly help.
Regards,
Nikhil Save

Hi Nikhil,
First of all you need to decide how you would be sending the File from ECC to PI.
You can send it via
SFTP/FTP(basically using File Adapter) or
you can use a Proxy and send the File as Attachment
You can go with Option 1 if you have no other data that needs to be transmitted along with the file. Please read the following:
Sending Text file without mapping using SOAP
File(PDF as attachment)-->XI-->WebService(SOAP with attachment)
For the Option 2 you can read the following Options:
attachments via ABAP Proxy
Does Proxy is capable of sending Attachments in .CSV files ZIP format?
Proxy with Attachments.
Please let me know if you need any other help.
Thanks & Regards,
Tejas Bisen

Connecting directly from ECC 6.0 to a 3rd party system with out XI ?

Similar Messages

Maybe you are looking for