Connecting Dual Cinema Displays to a 2011 MBP

I have a late 2011 Macbook Pro that I currently have connected to a 24" Dell monitor via the Mini-DVI/Thunderbolt port, and two other Dell 24's via Diamond USB adapters. I work in software development and always have a lot of windows open. I would like to switch to two 30" monitors instead and am looking at Apple 30" Cinema displays but I am not sure how to connect two of them to my Macbook. Can I?
My MBP has a Thunderbolt port, Firewire and two USB ports...
The USB adapters I have work great but only go up to 2048 x 1152 resolution so those won't work, unless there's a newer version with support for 2560 x 1600.
Is there any way to run two of these off of a MBP?

anyone?

Similar Messages

Unable to use any Apple Cinema Displays with unplugged 2011 MBP

My older MBPs have worked with Apple Cinema Displays (I currently have a few year old one and a 2011 27" ACD) while unplugged. My new 15" MBP however needs to remain plugged in to allow waking (or prevent sleeping) when hooked up to the display in clamshell mode (computer is closed). Is this a bug, a problem with my configuration, or just the way it is?
Thanks for any replies.
Jeff

Jeff,
if you want your settings to be the same plugged in while not plugged in, you'll need to do so in energy saver preferences in system preferences.
once there, you can tell your computer how to act when on battery power or when plugged in. This means telling it to not sleep even when not plugged in, or visa versa.
if you're talking about using your MBP closed while using the ACD, all you need to do is close it, and move your mouse around. it'll wake up but your ACD will become the main display with your dock and toolbar.

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

How do I connect my Cinema Display to my MacBook Pro??? I have the dvi to vga display port thing and nothing works.

What model (year) MacBook Pro? Depending on the model, it may have DVI, mini DisplayPort, Thunderbolt, or HDMI video connectors.
What model (yeasr) and size (17", 20". 22" ...) display. Depending on the model, it may have ADC, singlre-link DVI, dual-link DVI, or Mini DisplayPort connectors.

Share Cinema Display and peripherals with MBP and PC

Share Cinema Display and peripherals with MBP and PC
I am about to be forced to use a business network connected PC in my office, but I will continue to bring my personal MacBook Pro to work for my personal e-mail, calendar, internet, etc. (it will be connected to a seperate open DSL network). I am thinking about getting an Apple Cinema display and trying to use this one display for both computers. I would like a way to "switch back and forth" between the two systems, all the while using the same mouse, keyboard, printer and Cinema display.
Does anyone have any experience setting up what I am wanting to do?
Also, how does connecting an external display effect a MBP? Can you close the screen on the MBP, turning off the MBP's display but keeping the computer running? I'd like to be able to tuck the MBP out of the way to save deskspace but still be using it via the Cinema display and peripherals...
Thanks so much!

You can use synergy (link: http://synergy2.sourceforge.net/) to link the mouse and keyboard across the two platforms.
If you want to use only one display, you'll need a KVM switch.
You can run the MBP either with it's own screen open, or shut it and use only the external screen.
Hopefully this helps a little...

Connecting DVI Cinema Display and VGA Projector from Minidisplay Port

Hi Everyone!
I'm trying to get my mid 2011 Mac Mini to send a signal from my MiniDisplay Port to a vga splitter which works fine. My biggest thing is that when I connect my inFocus IN112 VGA Projector the screen shows up from my mac but to connect my Cinema Display it takes VGA so I had to go from the VGA Splitter on one side and use a vga to dvi adapter and my cinema display shows blank? Help Me Please!!
Thanks,
Andrew

I already have a converter on the end of the VGA Splitter to go to the Cinema. The reason I don't use the hdmi to dvi is because with the minidisplay port using vga to the projector and the hdmi going to dvi to the Cinema it makes the projector screen very rough and pixely

How to connect a Cinema Display to alternative input?

I want to upgrade my Mac Pro (2009) to a reasonably priced graphics card but there are very few that have a Mini Displayport input.
How do I connect a Cinema display with only a Mini DP to an HDMI, Displayport or DVI input? (and still use the sound)
I've looked for Mini DP(female) adapters and can't find any.

I'm unsure of the issue, the Mini has both mDP and HDMI outputs, right? If so, the mDP for the Cinema Display an a HDMI to VGA adapter for the 2nd monitor.

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate... disconnect display, open lid laptop display will not activate... used to work fine.

I have a MacBook Pro 15" 2.53GHz Mid2009.. updated to Lion which is now 10.7.3 build 11D50b... when I close lid and connect to Cinema Display, display will not activate when keyboard/mouse used... disconnect display, open lid and laptop display will not activate... only way out is hold power button. Worked fine before Lion update. Any Advice?

Thanks very much Coander15... I've printed the doc you pointed me towards and I'll run through it.. hoping it helps!
Before I installed Lion I simply hit any key on the keyboard or clicked the mouse...
The keyboard is USB (usually connected to monitor which is connected to laptop... have tried direct connect to laptop as well with no luck) and mouse is USB wireless to one of those tiny plug in's... have tried direct connect USb mouse as well with no luck.
I could plug the closed/sleeping laptop into the monitor and unplug from the monitor without incident all day/night... always worked fine.
Had heard something about this happening w/ Lion but went ahead anyway.
Oh well...
Hoping your pointer helps... will let you know how it turns out. Thanks very much for responding!!!

Want to connect 2 cinema display

hi i want to connect 2 cinema display to an iMac what do i have to do? is it compatible? what do i have to bue?
thanks
peter

If you don't need high speed for one display, you could use a USB to DVI adapter
<http://www.gefen.com/kvm/dproduct.jsp?prod_id=4517>

HT1825 Can I connect post cinema displays to my G4 and how?

Can I connect post cinema displays to my G4 and how?

You can use newer monitors but there are different ways to connect.
It all depends on the video card installed in your computer. Different model cards had different ports. My G4 MDD has the ATI Radeon 9000 with one ADC port (abandoned technology) and one DVI port (useful technology). So we need to either see the description of your graphics card from System Profiler >Graphics/displays, a photo of the ports on your card, or both.
As long as you find a monitor that shares the kind of ports on your Mac, you will be fine. I have a 2008-vintage LCD monitor on that circa 2003 MDD of mine. The MDD shipped with an Apple DVI-to-VGA adaptor so I can connect any monitor with DVI or VGA ports.
There is an inconsistency in your equipment profile: No PowerMac can run OS 10.6. Please do "About this Mac" and verify your processor type and Mac OS version. Then you can edit your profile to avoid future confusion.

MBP running hot when connected to Cinema Display

I have a 2.33 MBP that I use for work and at home. I also have a 23 inch Cinema display on my desk at home. I have noticed that when I have my MBP connect to the Cinema and the screen on the MBP closed it runs hot and the fans never seem to stop running. I was wondering if anyone has seen the same thing and if so what they have done to resolve the issues. I have had looked at the laptop coolers that go under the laptop and that powers the fans off an USB port, but I really like my desk clean and don't want to add something else to it. Any ideas or suggestions would be great.
Thanks
Matt

Try running with the lid open and see it temps drop.

MacBook Pro 2011 Connected to Cinema Display Issues

Started out as occasionally and now more often! When the laptop is plugged into the cinema display it occassionally will turn off or freeze completely. The only solution seems to be restarting the the laptop its self. Any ideas? We've already brough the display in and nothing could be recreated (of course)
Anyone had these issues?

{quote}Any way I can just connect it to the monitor then power it on?{quote}
Yes. If you want clamshell mode connect the display, hit the power button, and close the lid. For both displays leave the lid open.

How to connect my Cinema Display as a second monitor

I just purchased a new 27-inch iMac, and I explained to the Apple folks that I had a 17-inch cinema display (silver clad model) that I wanted to connect, for a dual monitor set up. They told me just to get the Mini DisplayPort to DVI Adapter, but I was surprised to realize that's not going to work.
Can anyone tell me how to do this, and what connector is actually needed? I have the big old white power brick that I bought to daisy chain my old 17 and 23 inch displays with my old configuration (Mac Pro).
Or can you not have a second monitor with an iMac?
Thanks in advance.

Hi Cathy,
What connector is on that Cinema? ADC, VGA, or DVI?
Video Card:
GeForce GTX 675MX
VRAM Type:
GDDR5
Details:
This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
Standard VRAM:
1 GB
Maximum VRAM:
1 GB*
Built-in Display:
27" 16:9 Widescreen
Native Resolution:
2560x1440
Details:
This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html

How to connect old Cinema Display (plastic frame) to new imac 2012 27"?, How to connect old Cinema Display (plastic frame) to new imac 2012 27"?

I just got an imac 27 late 2012, and like to connect and old Cinema Display 20" with plastic border( looks like an easel) what adapter do I need?, if this. Is possible at all..., thank you

Hi Cathy,
What connector is on that Cinema? ADC, VGA, or DVI?
Video Card:
GeForce GTX 675MX
VRAM Type:
GDDR5
Details:
This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
Standard VRAM:
1 GB
Maximum VRAM:
1 GB*
Built-in Display:
27" 16:9 Widescreen
Native Resolution:
2560x1440
Details:
This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html

Using Cinema Display with mid-2010 MBP, post-Yosemite: corrupted MBP screen

For a couple years I've been using a 27" Cinema Display attached to my mid-2010 MacBook Pro 15". The dual-display setup works great for my home setup.
However, since upgrading to Yosemite, the MBP display often completely corrupts and reverts to complete gibberish, with fragments of the UI and desktop littered all about the screen. Dragging a window over to that screen usually "redraws" it sufficiently enough to keep working, but soon the problem re-appears. The screen of the CInema Display (my main working area) never corrupts, only the MBP screen.
My setup worked great in Mavericks, but something in Yosemite isn't driving both displays properly. Can anything be done, aside from downgrading to Mavericks?
Andy

I am having this exact same problem. 2010 iMac with NVIDIA GeForce 9400 256MB. I have it hooked to a 30" display through a DisplayPort to DVI-D adapter. The 30" is fine, but I have graphical corruption constantly on the main iMac screen.
This all started as soon as I updated to Yosemite a couple days ago.

Original ADC 22" Cinema Display Works w/new MBP, doesn't with older one

I have two MacBook Pros. One is from late 2007. Core 2 Duo, max 3 gigs of RAM, non-unibody. The second is from late 2009. Unibody, max 8 gigs RAM, etc.
I also have two Apple Cinema Displays. One is 22", ADC. The other is 23", also ADC. I have ADC->DVI adaptors for both.
When I plug either of the two MBPs into my 23" display, it works perfectly. Auto-detects, screen flashes and resizes and wiggles a bit and everything just works exactly as expected.
When I plug the newer (2009) MacBook Pro into the 22" display, it also works perfectly.
When I plug the older (2007) MacBook Pro into the 22" display, nothing happens. No flicker, no screen shift, no work. No lines written to the system.log file, no indication that the laptop even notices that it's plugged in.
Here is a list of troubleshooting steps I have tried. (Please don't ask me to try any of these.)
* As noted above, I tried the 22" display with the newer laptop. Works fine.
* As noted above, I tried the 23" display with the older laptop. Works fine.
* Tried plugging the display into the laptop while the laptop was off, then turning it on.
* Tried plugging the display into the laptop while laptop was asleep, then waking it.
* Tried plugging the display into the laptop while laptop was awake.
* Tried pushing the display power button while it was plugged into the laptop.
* Tried the 'detect displays' button in the System Preferences.
* Tried zapping the PRAM
* Tried resetting the power management unit.
* Tried unplugging/replugging display power while connected to the laptop.
* Tried swapping the two power (ADC->DVI) adaptors.
(The problem follows the LCD, not the adaptor.) Also, just to add to the mix, I have tried plugging ANOTHER vintage 2007 MacBook Pro into this 22" display, and it also displayed the same symptoms: absolutely did not recognize the display, no matter what I did.
I find this really baffling. Why (HOW?) would the original Apple Cinema Display be incompatible with the 2007 MacBook Pro? Or what defect would make the Cinema Display not work with the 2007 MacBook Pro, but work fine with the 2009 MacBook Pro? The only difference I know of aside from a different video chip is the fact that the newer MBP requires an extra adaptor to get from DVI to the mini display port thingie.

I wonder whether you've solved this problem. I have the same issue with my MBP. The 20" Apple Cinema Display is connected through an ADC/DVI converter to a DVI KVM switchbox. It works fine with my G5 tower, but ever since I installed Leopard, it doesn't work on the MBP (in fact, if I plug it in the computer crashes). It worked fine before. I brought the MBP to the Genius Bar, and it worked fine there connected to a regular DVI monitor.

Connecting Dual Cinema Displays to a 2011 MBP

Similar Messages

Maybe you are looking for