Connecting E71 to macbook via blutooth

Folks,
while on move, i want to connect E71 GPRS to my macbook to browse the internet. can any one help me on this?
I tried not able to connect the internet...But i can exchange the files using bluetooth.
Do i need to install anything on MacBook?

Hi fundoo
Does this link help at all?
http://www.2nrds.com/using-the-nokia-e71-as-a-modem-on-a-mac
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

I cannot get my iMac to connect to my macbook via Thunderbolt to use my laptop as an extended desktop

I am trying to connect my iMac 21.5" desktop to my macbook pro via Thunderbolt cable so that I can use my laptop as an extended desktop. I have tried using detect displays to get it to show up and nothing happens. I've tried doing command + F2 to make it a targeted display, but the only thing I can get to happen is my iMac will mirror my Macbook and that's not what I want. No matter what I have tried it hasn't worked. I have tried turning both computers off and I have a brand new thunderbolt cable. I've updated all the software. Is there anything else I'm missing??
I'm running OSX Yosemite 10.10.1
Thank you !

We've already done all of that. And we used the same thunderbolt cable to connect two iMac's and that worked totally fine doing the Command+ F2. I don't understand why we can't get the macbook to do the same.

My iPhone 5 does not connect to my Macbook via Bluetooth (this is so frustrating!!)

Ok so i bought my iPhone 5 a couple days ago. So i installed and applications from app store ( on my mac ) which enables me to control my iphone through my mac (via bluetooth). It's very cool when my iphone is docked so i don't need to reach to it every single time. AND. guess what. my iphone refuses to connect to macbook and vice versa.
This is sooo frustrating i'm gonna die.
When i go to the general settings and bluetooth menu, it doesn't even find my macbook. I need to go to the bluetooth menu on mac, set up bluetooth device and then select my iphone. Then, it does pair. BUT it doesn't connect it says:
Connection Unsuccessful
"Macbook Pro" is not supported.
And gives me only on option: "Forget Device"
Any help?

you mentioned you purchased from the mac app store, the only thing I could find is Type2Phone, and that app has some ts'ing steps in its description that match almost exactly what you described /

Connecting surface to macbook via bluetooth

I am attempting to connect my surface pro, running windows 8.1, to a macbook, running osx 10.6.8, via Bluetooth. I would like to be able to share file between the two computers and if possible extend the display of my surface to the macbook.
I have discovered and added the laptop as a device, but I am unable to send any files in either direction.
When I go to display settings the laptop does not show as an option to display to.
I don't know if either of these applications are readily supported but if they are I would really like to know how to both. They would make things run much more smoothly in my classroom.

Just mark the question as 'solved,' please - that will keep others from clicking the question to see if we can help you.
Thanks, and glad you got it working!
Clinton

I cant get iphone 4 to connect with my macbook via bluetooth. IS there a way?

I can connect and pair my ipad to the iphone. I can pair it to the macbook pro - but when i try to connect the 2 the Iphone tells me it is not supported. Is there a way - or is this coming in Lion

No, and not coming in Lion. iPhones don't have the BT profiles for data transfer. The only BT connection possible between the iPhone and a computer is for tethering/hotspot internet connection.
WiFi data connection is far more reliable and faster.

Connecting MDD to Macbook via fire wire

I thought it would be as simple as connecting the two...But it's not.
I tried different ports on the MDD and still nothing. How do I do it?
I just want to transfer some files from one to the other.

There's 2 ways...
IP over FW and booting the MDD into FW Target Mode…
http://docs.info.apple.com/article.html?artnum=58583
In which case the MDD's Main Drive & Optical should show up on the MBP as Drives.

How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable. The TV says "no signal. I do not see TV as an option in the display tab of system prefer

how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable. The TV says "no signal. I do not see TV as an option in the display tab of system preferences. what else do I need to do?

First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
Matt

Sound won't work when my MacBook is connected to my TV via HDMI

I have my MacBook connected to my HDTV via mini DVI to HDMI and the picture is perfect, but I cannot make the sound work. I've tried going to sound under system preferences but my tv is not listed as a device. Do you know how I can make the sound work?

You need an audio cable to connect your Mac's audio out port to your TV's audio in port. The minidisplayport does not send sound.

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router

My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?

Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Macbook Pro suddenly will not connect to the internet via ethernet cable.

I know this is a long shot... but I figured I would give it a try.
My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue. Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

Can I create a wi-fi network on my macbook and still connect to the internet via an actual wifi point?

Hi,
I got TrakProDJ from the app store and installed it.
It allows me to control a DJing software with my iPad by setting up a network via Wifi Symbol in Toolbar>Create Network...
The problem with this is the network I create isn't based in the internet--it's just a wifi link between my laptop and iPad.
I'm sure I'll get asked to play songs I'll have to look up on youtube, so how is it possible that I can maintain my wifi network connection on my macbook and create an access point for my iPad to use to communicate with my laptop (to control the DJing software)?
I'll really appreciate any help I can get!
Thank you!

You cannot use both an ad-hoc network and a normal ap based one with any wireless device. Your only solution is to use a wired Internet connection to do so on the laptop, that way you use that for Internet access and your wifi for the ad-hoc network the app requires. You might want to contact the developer of that app and find out why they limit the setup to just an ad-hoc wifi setup. Seems that if all it requires is just a network connection to the laptop, they could simply use any existing network connection as long as both devices can see each other on it. Either that or also give the user the option to use Bluetooth for it if they have the higher version of hardware to support the necessary data exchange.

My Macbook Pro will no longer connect to my tv via HDMI

Well basically it is in the title, my Macbook Pro will no longer connect to my tv via HDMI.
I have been using this cable for a long time and works perfectly.
earlier today i used it to connect my mac up to my parents 4k tv, it worked fine, did what i wanted to do.
but now when I've come to connect it up to my tv it recognises there is something connected but it won't display anything
it just says no signal on my tv
im not sure whether my mac has changed some settings on its own to run on 4k but now to high to run on my 1080p tv
pretty annoying so any ideas id be very grateful.
I've already tried
restarting my mac
turning tv on and off
different hdmi ports
thank you

Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Try another cable

On my MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks.

On my new MacBook Pro when I am connected to the internet via an Ethernet cable, Facebook pictures do not load. They show up as white boxes with blue question marks. This also happens on a website editor. But, when I am connected to the internet via Wifi, everything load properly. This is my work computer, so I have to be able to connect through the Ethernet cable to access everything. Please help me!

I mostly use Safari. But I also tried it on Firefox, Mozilla, and Camino. Mac OS X. It's my work computer, so I've only tried it at the office. I have to be connected through the Ethernet cable to access my files and email on the server.

Connecting kurzweil sp88 to GB I want to connect my Kurzweil sp88 to GB. The Kurzweil has a baffling array of buttons and possible MIDI channels. It also has the old style MIDI plug ins. I've got the MIDI out connected to my MacBook Pro via USB adapter.

I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I should use? Also, should I leave the MIDI In cable out of the Kurzweil? Thanks for as detailed an answer as possible. If you like you can respond directly to me at [email protected]

First of all I do not own this keyboard. But a quick look at the manual (found on the internet) says that when first powered up the SP88 is in Internal Sounds mode. Meaning you hear the sounds selected when playing the keyboard. It also stated that the default Midi Transmit Channel is Midi Channel #1.
Looks like you would need to go to the SP88 Keyboard's MIDI SETUP and simply select LOCAL OFF. Now the keyboard should be ready to transmit Midi Out only and no internal sounds should be heard.
Next you may or may not need to do this but you might need to go into the Utilities Folder found in your Applications Folder on your Mac and double click AUDIO MIDI SETUP the keyboard Icon. Figure #1 below.
Next you need to make a physical connection from the Midi Out of the SP88 to the Midi In on your Midi Interface. Figure #3 below. You may need to Click on Add Device first. Figure #2 below.
In the examples shown below I have a Yamaha Electronic Drum Kit that is Midi Out only... not USB out. I had to plug a Midi cable from the Midi Out Port on the back of my Drum Module to the Midi In Port on the back of my Motu 828 Audio Inferface which is connected to my Mac. Next I created the Audio Interface and Drum Module "Devices" as mentioned above.
I then double clicked on the Drum Module and made my Midi Out Selections. Figure #4 Below. And once it was setup and the icons closed I used my mouse to draw a virtual cable connection from the Drum Module Out to the Audio Interface In. Figure #3 below. This is how I got my Midi Devices to talk to one another.
Once you have made your setup as I have outlined create a MIDI Instrument Track in Garageband, select an instrument for example a Piano then Record Enable that track in Garageband and see if you now hear what you are playing. In this example the SP88 is a Midi Controller only and you will only hear sounds selected in Garageband which is what you want.
Keep in midi your setup may be different than mine. You can keep your SP88 Keyboard on the default Midi Channel #1. That would be a good place to start. Garageband receives Midi on all channels.

What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

Hello Alex,
It sounds like you are getting excessive CPU usage when connecting an external display via HDMI to your computer. I would try the troubleshooting steps outlined in the article named:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
When using an external display be sure to check the following:
If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
Monitor and Display Adapter Table
About Mini DisplayPort to HDMI adapters
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
Thunderbolt ports and displays: Frequently asked questions (FAQ)
Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
Try unplugging the video adapter or cable and then plug it back in.
If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
Reset the systemYou can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Connecting E71 to macbook via blutooth

Similar Messages

Maybe you are looking for