Connecting Ellipsis Jetpack to Canon Printer

Can anyone tell me how to get my canon pixma mg3200 printer, to connect to the ellipsis jetpack?

Contact Cannon technical support and have them walk you through the printers wireless connection process.  Cannon will be able to look up user guides for you that will explain what needs to be entered and how to enter it in the printer.
The Jetpack is going to be like any other wireless hotspot from the printers perspective.  There should be no need to configure anything on the Jetpack to allow your printer to connect.  If for some reason you need to look up the networking information of your Jetpack then let us know.  We would need to know which specific Jetpack model you have so we can dig up the correct user guide and provide you with the steps.

Similar Messages

  • I am trying to connect my blue tooth canon printer with my ipad air?

    i am trying to connect my blue tooth canon printer with my ipad air?

    The iPad does not support Bluetooth Printers.    Headsets, Speakers, Keyboards, Hands Free Devices, In car Madia centers but not Printers.
    To use a printer it must be AirPrint Compatible and be on the same Wifi network as the iPad.

  • HT3500 i have a mac pro and have connected to my wireless canon printer. I was able to print but now the printer comes up with the paper in the tray is the wrong size. but the paper is A4. does any one know what is wrong.

    I have connected to my wireless canon printer but it wont let me print from my mac pro. printer comes up with the message that the paper size doesnt match the printer settings. I have tried to change the settings on the printer but that didnt work. can anyone help

    Well... no help was found here.. so I abandoned the wireless- ness of my printer.  I bought a
    small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
    and any kind of printer.   I also bought a long USB cable.  I now print--wired since this can be done
    as an alternative to wireless with this printer.   Because I don't want a cable "hanging around"
    when the printer is not in use, I simple disconnect it and reconnect when I want to print.
    It's a temporary solution others may find helpful as well. Apparently there's been a lot of
    confusion and problems getting this printer set up wirelessly with our MacBooks.
    Shame on HP for not helping us out!

  • Connecting wirelessly to my Canon printer

    I have two homes, one in St. Petersburg, Florida and one in Chicago. When I drove up to Chicago over the weekend, I brought my 24-inch iMac with me. It has worked flawlessly in Florida for several years with my Airport wireless system, and works just fine in Chicago with the Airport router here -- except it won't print wirelessly. I keep getting "printer busy" Error 113 messages. Yet my MacBookPro has no problem talking to the printer, which is a Canon MP980. Any thoughts?
    Just as a side note, if I can't make the printer and Mac talk to one another wirelessly, I don't mind hardwiring them, but I need a longer cord than came with the printer. Are they available?
    j

    If you haven't tried this already I would delete the current print queue on the iMac to the wireless MP830 and then add the queue again. When you add and select the Default view, the MP830 should appear quickly as a scanner and then sometime later as the printer (showing canonijnetwork in the Kind column). With this printer queue selected the Print Using menu should automatically change to Canon MP830 series. When it does click Add and then see if you can print from the iMac.

  • Canon printer won't connect since upgrade to Lion

    Ever since I upgraded to Lion I can't connect up with my Canon printer anymore.  How do I fix this?

    Install driver:
    http://support.apple.com/kb/DL899?viewlocale=en_US&locale=en_US

  • Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb.  Any suggestions?  Thanks. LL

    My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB.  Have had no previous issues with printing, scanning or faxing.  When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the  on my MAC which shows the same problem.  All of the color and black cartridges are new.
    The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
    Any suggestions?  Could this simply be a compatibility problem?  I'd sure like to keep my Canon printer.
    Thanks,  LL

    Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
    Also an FYI - this is the Mavericks forum. The Yosemite forum is here

  • When I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

    when I press ALL in print options, my canon printer will only print the first page.  It is connected to wifi

  • Connect a Canon Printer to macbook

    I am struggling to connect a Canon Selphy C780 to my macbook pro. Any ideas?

    Hello SpiderRon,
    If you are having issues connecting your Canon printer to your MacBook Pro, you may find the information and troubleshooting steps outlined in the following articles helpful:
    OS X Yosemite: Add or remove a printer
    OS X Yosemite: Printing troubleshooting
    Sincerely,
    - Brenden

  • Connected wirelessly to Canon printer MX340. Duplex printing option is grayed out for me but not on my daughter's non-Mac laptop or husband's PC which is connected to the printer. Mine has two-sided option available at the Apple store. Any ideas?

    We use a Canon MX340 series printer/fax/scanner. My husband has his PC hooked to it and my daughter prints wirelessly from it with no problem with her non-Mac laptop. I have trouble printing. Often it does not print and I have to delete the job from the queue. Other times it will print OK but two-sided printing is always grayed out in my printing options. When I took it to the Apple store and printed on their network (selecting their printer) the two-sided option was available. Makes me think the printer is set up wrong, but I am not certain. A fw times at home when trying to print I got an error message about incompatible fonts, but it printed anyway after deleting the job and starting over. Does anyone have any ideas? Thanks

    OK, just an update.
    Two years into this, I still find I can only do full duplex printing by using Windows XP running inside of VMWare. I've had occasional, ephemeral luck with duplex printing, but nothing long lasting.
    I've tried this in Tiger and Leopard (now at 10.5.6), and I've had this issue with Canon printers MP780 iP4300 and MP610, direct connected to my Core2Duo 17" MBP. I also have this issue when printing over a network, but that's a much harder problem to solve.
    Currently, this is my #1 most pressing issue for my Mac, because not being able to print from a computer when you print a lot is a really big drag, and using VMWare all the time is also a really big drag. Other people posting seem to be able to print in Duplex using the very same printers. What could be wrong with my MBP? I see the duplex box option, but most of the time it's grayed out as if my printer doesn't support duplex.
    I've tried direct selecting printer drivers from the system preferences, but nothing seems to have an effect. And this is off of a clean Leopard install.
    My wife now has similar problems with her new MBP - the Canon print drivers (CUSP & non CUSP) aren't allowing the Duplex box to be checked.
    I am willing to pay good money to anyone who thinks they can fix this problem.
    Thank you,
    - Jeff

  • Ellipsis Jetpack won't connect and now won't even turn on

    I have been having a problem with my Toshiba running Vista , connecting to my Ellipsis jetpack. I called customer service and while the rep was very courteous and helpful, she stated the problem was a security issue with my laptop. I took several measures to disable the security features but to no avail.  Finally, I took the laptop and jetpack in to Verizon yesterday to get some answers. Two different service reps attempted to solve my problem. The second rep finally told me that this is a known problem with Vista/Ellipsis compatibility. He kindly offered the solution of upgrading to a newer version of Windows. After returningbhome and doing some research, i find that my Toshiba doesn't meet the requirements to upgrade. Does this mean I have to buy a new computer to connect to my jetpack???? On top of that, the jetpack shut down this morning while I was actually connected and working online, and now it won't turn back on, even after a hard reset. Frustrated and dissatisfied. Can anyone help???

    I too have an Ellipsis jetpack. Unfortunately the Verizon CSR(s) you spoke to gave out a lot of misinformation.
    Since you've been able to connect to the Ellipsis in the past it should not be an encryption issue (security). However you could log into the Ellipsis and change the security from WPA2 to WPA to see if that resolves your problem. Do you have the ability to connect a different wireless device to see if it can connect and remain connected?
    There are no "compatibility issues" with systems running Vista and connecting to the Ellipsis.
    If your laptop runs Vista then it will handle Windows 7 or 8. Most drivers should be installed automatically, but you may have to find some on your own.
    Regarding the power issue:
    Pull the power cord & battery out of the Ellipsis for 10 min, then reconnect and hold the power switch to power it on.
    I would also recommend that you see if there is a driver update for your wireless adapter. Don't just rely on Windows Update or Toshiba's website either. Get the model # of the adapter and go to the mfg's site for the latest driver - especially if it's Realtek, Intel, or Atheros since they are often updated.

  • Hello, I currently have a MacBook snow leapord and i'm trying to connect it with my Canon MP560 printer, i put in the CD and installed everything properly but now when i add a printer it says a Queue already exists, i click continue and nothing happens???

    Hello,
    I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
    I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
    So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
    Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
    When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
    had happend. PLEASE HELP
    sincerely,
    Laura.

    I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
    If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
    But, before doing this, download the last good driver, CDs usually contain outdated drivers.

  • I'm having trouble with my Ellipsis Jetpack connecting to a Windows 8.1 computer

    Has anyone had any problems connecting the jetpack (Ellipsis) to the internet with a computer that is running Windows 8,1?  I was able to remove my password and it connected, but I'm leary about connecting without the password.  It connected beautifully with my laptop using Windows 7 and my android phone (as well as the Verizon salesman's phone) who hooked me up.  Any help would greatly be appreciated!  I spent 2-1/2 hours on the phone with HP and Verizon support at the same time and neither tech had an answer.

    Thank you for your answer, but my Ellipsis is a jet pack.  There is a tablet called Ellipsis, however, mine is a wireless jet pack.  I believe it is relatively new (since around Dec. 2013) give or take a few months. 
    I am trying to connect to the internet from my desktop computer running Windows 8.1 using my Ellipsis Jet Pack device.  My Ellipsis jet pack connected every device in the house except for the desktop.  Once I erased my password and tried getting on the internet via the jet pack and no password, my desktop computer accepted it and I was online.
    I've been reading about connectivity issues that 8.1 is having right now.  I have a feeling that it is the Windows 8.1 issue more so than the jet pack. 
    Thank you!

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • Can't connect to ellipsis jetpack on vista

    can not connect to my laptop vista using my ellipsis jetpack. can it be done or do i have to switch mifi's?

        Pholcombe,
    This should be something you can do and we'll be happy to help figure out why it isn't connecting. Does your laptop see the Jetpack connection at all? If it does and you try to connect do you get an error message or something? What about other devices? Can they connect to the Jetpack ok?
    SarahO_VZW
    Follow us on Twitter @VZWSupport

  • HT1338 unable to connect Canon Printer imageCLASS MF5950dw to my Mac

    unable to connect Canon Printer imageCLASS MF5950dw to my Mac

    Instead of using Bonjour to connect to the network printer I suggest you use the LPD protocol. To do so, open Print & Scan and click the plus button to add. With the Default Add printer view showing, click the IP icon in the toolbar. You can then enter the IP address of the MF5980dw, ensure LPD is selected for the protocol and leave the queue name blank. You can also change the name from the IP address to something more meaningful, like Canon Printer, leave the Location blank and in the Use menu, change to "Select printer software" and then browse for the MF5900 Series. When found and selected, click OK and then Add to complete the printer queue creation. Now see if this will print to the Canon.

Maybe you are looking for

  • Automatically open excel spreadsheets with numbers

    can anyone tell me is it possible to set numbers as the default application to ALWAYS open excel spreadsheets? each time i try to open an excel spreadsheet the computer starts up the trial office software. I then have to cancel and choose "open with"

  • HT204053 How do i merge two iTunes accounts?

    My Dad and i are having trouble with his iTunes accounts. notice they were plural. yes, my dad has two different apple IDs with two different passwords. this was do to a problem we had with iTunes. He has arround 50 dollars in apps on one account (du

  • Is there anyway to program a device to receive IR signals from a wireless

    device and program it to activate certain application.kindly tell me.

  • PO workflow maintenance

    Hi all, I have currently changing the workflow settings for "Position" using transaction PPOME. Under "Position" folder, there are many defined positions, each with users assigned. Need advises to perform the followings as i am new to workflow mainte

  • How to sync iPad2 with MBPro.

    I want specifically to sync my Calendar on my MBPro to my iPad2. Thanks for your help. Vernon