Connecting EP 7.0 to Solman

Hi All,
We are in process of connecting our systems to Solman we have connected the Web as Abap systems thru RFC but when we try to connect the EP which is Web as Java i am not able to find the way to connect the system.
Is there any way to connect the Web as java system.
Please suggest...
Thanks,
Subhash.G

Dear Subhash,
Could you kindly refer to the SAP note :
644783 - EP 6.0 Monitoring via CCMS / SolMan
You can also find further documentation on :
URL: http://help.sap.com
-> Documentation
-> SAP Solution Manager
-> SAP Solution Manager 3.2 SP06 ( or your release )
Please find here information on Setup System Monitoring
Hope this information helps.
Regards
Amit

Similar Messages

Sapxpg - connection to partner broken (SLD - SolMan)

Hello,
I've problem wtih my RFC-Connection SAPXPG_DBDEST_<host>.
To collect data for dba-cockpit, we need a RFC-Connection between SolMan and SLD:
RFC Destination     SAPXPG_DBDEST_HBMESA5A
Connection Type T TCP/IP Connection                 Description
Description 1       sapxpg
Program               sapxpg
Target Host          hbmesa5a......
Save as               10.0.61.86
                                 20     Defined Value in Seconds
Gateway Host        hbmesa5a......
Gateway service:   sapgw00
Gatway is running correct.
Connection Test gives result:
Logon     Cancel
Error Details     connection to partner '127.0.0.1:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t
Error Details     ERROR: connection to partner '127.0.0.1:0' broken
Error Details     LOCATION: SAP-Gateway on host hbmesa5a / sapgw00
Error Details     DETAIL: NiIRead: 127.0.0.1:0
Error Details     CALL: recv
Error Details     COMPONENT: NI (network interface)
Error Details     COUNTER: 9655
Error Details     MODULE: nixxi.cpp
Error Details     LINE: 4702
Error Details     RETURN CODE: -6
Error Details     SUBRC: 0
Error Details     RELEASE: 711
Error Details     TIME: Fri Feb 4 17:28:20 2011
Error Details     VERSION: 39
rfc-connection from our solution manager to the target host.
Could anyone give us advice? Thanks in advance
Best Regards
Gerry Vanek
Edited by: Gerry Vanek on Feb 4, 2011 5:34 PM

Hello,
we fixed the problem. Really simple when you know ...;()
We deleted the existing RFC-Connection and created a new one with the same parameters.
After that the connection works fine. The RFC had the problem, probably a corrupted entry in the table.
Best regards
Gerry Vanek
Edited by: Gerry Vanek on Feb 25, 2011 3:37 PM

Does anyone provide connection to SAP sys. thru SolMan other than for SAP?

I have had staff ask IF there are issues with having 'off shore' consultants log into our landscape thru SolMan?
My preference would be NOT to, as we have we would be generating long distance charges as well as the connections tend to time out during a period that they are not in use.
I believe this connection was meant to only have SAP log in to our systems for the purpose of trouble shooting issues for messages
Anyone? please advise
Thanks& Regards,
Maria

I think it depends on what you want your offshore consultants to do in your systems.
If they have all access on the remote systems and on your SolMan, it doesn't really matter how they logon, wether it is using a gui or using the remote connections in SolMan.
They have the same authorities.
So, a best practice...... It's all up to your own wishes.
All I know is SAP suggests that you administrate all your systems from Solution Manager.
1 Access point to all systems. And when setup properly, you only need to logon once.
From a technical point of view, I'd recommend setting it up.
As far as the workcenters are concerned, these are webdynpro pages.
They do exactly the same as the "normal" ABAP transactions. It only looks a bit more user-friendly.
Plus the oversight is better. The content of the tabbed areas is logically grouped.
Read the following document, might be helpfull
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80f23fae-d7e2-2a10-34b5-f049d65d34d6
Regards,
David

Solman connection with DEV + prodcution server

Dear friends,
Pls give the link for
1. SOLMAN configuration .... connection with DEVELOPMENT server and PRODUCTION server
2. Then .. if any document or pdf is uploaded in Development .. It is also display in SOLMAN.
thanks
Lee

Dear Lee,
Here are the steps to connect an Satellite System to Solman applicable to both Dev and Prd Systems :
1. Create the Server / Database / System Component in transaction SMSY (
Landscape Components ) to define the system to Solman. In the System component ensure that you have generated RFC's to the relevant clients of the satellite system using the Generate RFC function.
2. Then in transaction SMSY itself , Create an Logical Component for the product amd product version of the system and assign the system to the logical component as per the logical role of the system like DEV / QAS / PRD.
3. Then Create an Solution in transaction DSWP and add the Logical component to the Solution in the Solution Settings.
Bingo. Here you are set to either setup system monitoring for the satellite system or to generate EWA's for the satellite system or to configure Service desk and all other related scenarios.
I hope these steps help you configure Solman.
Regards
Amit

Step by step guide to connect Satellite systems to SOLMAN....

Hi all,
Can you provide a Step by step guide to connect <b>Satellite systems like (SAP CRM, SAP ECC 5.0 Etc..) to SOLMAN</b> and also what are the major config steps involved in connecting a satellite systems to Solman.
The connection is basically to monitor key performance issues of the satellite systems through Solman....
Need ur inputs on this...
Thanks and Best regards,
Subba

Hi,
In a system landscape you can only add logical components. Please double click on the name of the logical components. You will arrive in the maintenance area for logical components. There you can add systems to your logical components.
Check the following links also.
satellite system
Solution Manager - How to connect to satellite system ( refer this)
Re: Service desk RFC destination in the Satellite system
Re: Satellite Logon
Regards,
Note: Points always encourage me to reply !!

How to Create Support Message with no SolMan User

Hi all,
I would like to test if it is possible to create a support message from ECC system, if the same user do not have a SolMan user.
Now, in few other threads, like
Creation of support message in SolMan without having user id in SolMan
Re: Do End User Require Login in Solman to raise Support Messages !!
show to the user there support message list
e.t.c.
it is clearly stated: it is possible.
I have done the next steps:
In ECC:
- created a test user
- assighned him a "sap_all" profile (and "Z_SAP_SV_FDB_NOTIF_BC_CREATE" role) + user comparasion
- assighned him a "Z_SAP_S_RFCACL" role + user comparasion
In Solman:
- No user created
- In TX DNO_CUST04 the Field Name "NO_USER_CHECK" is maintained with the value "X".
- In tx BP business partner is created as a general BP, with valid external SYS ID no (other users with both ECC and SM user are OK), and changed to "employee" with ECC username defined.
Now, the problem is when I try to create a support message as a test user in ECC, I get an error:
"Error in Local Message System: No authorization to logon as trusted system (Trust Message was Not Created"
All I could find is the tread:
solution maanger issue
and this one is basicly different:
the mentioned user has both ECC and SM user.
And one of the answers was the user must have S_RFCACL roles in BOTH ECC ans SM systems...
In ST22 (in solman) I get error description:
" An RFC call (Remote Function Call) was sent with the invalid user ID
"TEST_T01230 "
. Or the calling system is not registered as trusted system in the
target system."
Now, the calling system IS regged as a trusted sys (as I mantioned - other users with both ECC and SM users can send supp. msgs)
So - the only answer is "invalid user ID".
The short message is
" No authorization to logon as trusted system (Trusted RC=0)"
and the trusted return codes ( 0 ) have the following meaning: Invalid logon data (user ID and client) for the trusting system.
So. how can I perform trusted Logon with no user in SM?
Thank you in advance,
cheers
Nenad

Hi again,
thank you for your help.
At first I thought you meant *_back dest. directly in SM, and now I see you ment to use SMSY to go to ECC sys, and maintain the RFC conns on ECC diredtly from SMSY, "clean-up RFC Destinations". Yes, can do
So:
The problem is solved.
I deleted the *_back user from ECC to SM, and re-generated the connection with default system pre-defined user SMB_T01. (it is interesting that SU01 reports - user SMB_T01 does not exist)
I even deleted a SRFCACL role from the test user in ECC, and the user was still able to create the support message (certanly he was, as he uses a *:back rfc with SMB_T01to log on to SM)
So, resume:
To be able to create / send a support message from another system, with no user in SolMan, it is needed:
- a user in other system with roles needed for everyday work, + "Z_SAP_SV_FDB_NOTIF_BC_CREATE" role;
- a not trusted SM_<SID>CLNT<CLNT_NB>_BACK rfc connection from satelite system to SolMan, with defined logon user (with apropriate authorisations) - generated by the system.
- the BCOS_CUST table in ECC system should be onfigured like: OSS_MSG W SM_<SID>CLNT<CLNT_NB>_BACK CUST 620 1.0
- a Business Partner for user in SM with identification number for system from where the massege will be sent from. (the user can send the note with out this condition, but the "created by" field in message will be empty in that case)
Once again thank you,
cheers,
Nenad
Case closed.
Edited by: Nenad nikolic on Mar 23, 2010 10:54 AM
Edited by: Nenad nikolic on Mar 23, 2010 10:57 AM

Solman_setup: connect managed system

Hi,
I try to connect a system to the solman via TA: solman_setup.
After running the first "managed system configuration" "connect managed system" I got the error message:
The selected templates do not contain any authorization data
What templates are missing and how can I correct this error?
Thanks for your help,
Tim

Hi,
Would you please check whether the role 'SAP_SOLMAN_ADMIN' exists in your system or not?
If it exists, what you have to do first is copying the role 'SAP_SOLMAN_ADMIN' to 'ZSAP_SOLMAN_ADMIN' in the transaction PFCG.
If the role 'SAP_SOLMAN_ADMIN' doesn't exist, then please refer to the note 1305622 to manually create a role. In some scenarios, the system role creation ZSAP_SOLMAN_ADMIN can be failed. Then, it needs to be created
by manually. In that case, please refer to the note 1305622.
Also
implement the note 1236420 on the affected managed systems. This will solve the error "The selected templates do not contain any authorization data".
I think this should solve your problem.
Regards,
Shyam

How to LMDB configuration Java system to Solman

Dear Gurus,
We have already installed a java instance system. We want to define and connect to it to our solman (LMDB). We have already defined many ABAP systems in the solman, but we dont know how to do it for JAVA instance system. Which guide should we follow for it ? Could you please help us ?
Regards

Hi Kemal,
Please check below SAP notes to register Java system to SLD based upon the Java system version :
For As Java NW 7.1X and higher
1786493 - Setting Up the SLD Data Supplier for AS Java Based Systems (NW 7.1X and higher)
Setting Up the SLD Data Supplier for AS Java Based Systems lower than NW 7.1X:
SAP Note 673144 (J2EE Engine registration in the System Landscape Directory).
Kindly check that the SLD and LMDB sync job is running correctly;
So that the system will be automatically added in LMDB after it has been registered in Solution Manager SLD.
Hope this helps.
Thanks & Regards,
Nisha

Solman with sattelite system(what with AISUSER)

Hello,
I need urgently your help. We have connected our Solution manager to SAP OSS. Sendind and receiving of messages which were created in our Solman is OK. Afterwards we connected sattelite customer system R3. Sending of messages from that R3 to Solman is lso OK. Now we have problems with fowarding of these messages to OSS(messages which came from R3). There is a table with OSS users called AISUSER. There we have our OSS users without "S". In OSS we have all the necessary authorizations for our Solman Instalation number. But when came a message to our Solman from customer R3(another instalation number) and we want to forward it to OSS we got a message "Instalation number not known in the SAP customer notification system".
Summary: Our Solman, Our OSS user with authorizations for our solman, customer R3 connected to our Solman. I do not know, how to handle it...For the first time, when I wanted to send message from OUR Solman CREATED in OUR Solman I got "Instalation number not known in the SAP customer notification system" I added our Solman instalation number in OSS and it was OK afterwards. But with sattelite customer system i cannot do it, because of another OSS user and instalation number(The customer R3 instalation we can't add in OSS)
Thans Miloslav Pudil

Have you performed all the IMG activities for the same.
Goto SPRO and check for the activities connect to SAP.
SAP solman->Basic settings->standard conf of basic settings->connect to SAP
Mainly it is the REFRESH_ADMIN_SUPPORT job but there are lot of other jobs too..check the same.
and your prb will be def resolved.
There are schedule background jobs which are needed to update the SAP and ur solman server for the same.
Pls assign pts.

NWBC and Solman

Hi ,
I am looking to use NWBC for Solman. I tried to connect with path /sap/bc/solman/nwbc/solmanwork. Is that right?
When I test thi service I have an error:No administration role defined for cockpit "solmanwork". It looks like it searchs for role "SAP_DAL_ADMIN_solmanwork" or "Z_DAL_ADMIN_solmanwork".
Do I need to create them? Where should I assign them?
Edit: I created a role Z_DAL_ADMIN_SOLMANWORK, copy of SAP_SMWORK_CHANGE_MAN and assigned it to the cockpit solmanwork via NWBC_SET_ADDITIONAL_ROLE_ATTR.
Now I have an error of connexion (401):
ERROR <NWBC::CConnectionManager> | Failed to load content from connection Solution Manager! (error Non autoris.. (401), error code 1)
Thanks a lot,
Julien

Hi,
Same problem here. We want to integrate NWBC with the SolMan workcenters to give an "easy" acess to SolMan to our managers.
Is there any documentation, guideline etc. about how to make this configuration?
Thanks in advance,
Jon

Error while scheduling data collector: Error adding routine 'SAPTOOLS.DBH_FWK_CLEANUP' to task scheduler

Error Detail
Exception CX_DBA_ADBC in program RAGS_SISE_ACTIVITY_JOB line 0
Kernel Error ID:
WP ID: 23
WP PID: 28977
SYSID: CR5
SY-SUBRC: 0
SQL statement:
Database: CR5
caused by
Exception CX_SQL_EXCEPTION in class CL_SQL_STATEMENT
Kernel Error ID:
DB Error: Yes
SQL Code: 444-
SQL Message: SQL0444N Routine "*TASK_ADD" (specific name "SQL140704080729140") is implemented with code in library or path "...ib/function/SYSPROC.ADMIN_TASK_ADD", function "*" which cannot be accessed. Reason code: "4". SQLSTATE=42724 row=1
DB Object Exists: No
Duplicated Key: No
Internal Error: 1
Invalid Cursor: No
Unknown Connection: No
Connection Closed: No
System Detail:
Solman 7.1
ST    710    0010    SAPKITL710    SAP Solution Manager Tool
SAP_BASIS    702    0013    SAPKB70213    SAP Basis Component
Managed system:
SAP CRM ABAP 7.0
SAP_BASIS    701    0005    SAPKB70105    SAP Basis Component
SAP_ABA    701    0005    SAPKA70105    Cross-Application Component
PI_BASIS    701    0005    SAPK-70105INPIBASIS    Basis Plug-In
ST-PI    2008_1_700    0008    SAPKITLRD8    SAP Solution Tools Plug-In
CRMLOY    700    0005    SAPK-70005INCRMLOY    CRM Loyalty Management 700
SAP_BS_FND    701    0005    SAPK-70105INSAPBSFND    SAP Business Suite Foundation
SAP_BW    701    0005    SAPKW70105    SAP Business Warehouse
LCAPPS    2005_700    0007    SAPKIBHD07    LC Applications (LCAPPS) 2005_700
Database DB2
db2level
DB21085I Instance "db2cr5" uses "64" bits and DB2 code release "SQL09016" with
level identifier "01070107".
Informational tokens are "DB2 v9.1.0.6", "s081007", "U817474", and Fix Pack
"6".
Activity detail:
We are performing managed system configuration for CRM into Solman by using solman_setup transaction. While performing the Database Extractor Setup in step 8 we have observed above error.
Action take at our end:
1. Clean the LMDB and restart the configuration. - no luck
2. Upgrade the hostagent at CRM - No luck
3. Update the SLD for CRM entry - no luck
4. implemented SAP notes:
875986    Note Assistant: Important notes for SAP_BASIS up to 702
1246964    Note Assistant: Master language of notes incorrect
1262653    SPAU: New object is deleted after note is reset
1309424    DB6: DBA Cockpit Correction Collection SAP Basis 7.01 / 7.11
1335017    DB6:"Remove Redundant Restrictions" can return wrong results
1349277    Note Assistant: Method cannot be implemented
1365677    Note Assistant: Runtime error MOVE_CAST_ERROR during implmtn
1372652    DB6: Short dump when viewing diaglog due to NULL bytes
1373957    DB6: CX_SY_CONVERSION_OVERFLOW in new EXPLAIN
1376543    DB6: OPTIONS parameters for backup jobs in DB13
1378499    DB6: CLI error CLI0112E with "REORGCK_ALL" job
1379260    DB6: Add BW query name as comment to SQL statements
1379346    DB6: Scheduling of data collectors fails
1381179    DB6: Incorrect values for 'number of objects in tablespace'
1382634    DB6: Unable to create view 'SAPTOOLS.DBH_TABCLASS'
1382996    DB6: Update of DPW Back-End in Monitored DBs does not work
1384238    DB6: Defect scheduler on DB2 9.1 FP7/FP8 for LUW on Linux
1387022    DBA Cockpit: Month displayed incorrectly in DB13C
1387297    DB6: SQL-Fehler 901 during RUNSTATS and REORGCHK
1397709    Ignore Dynpro element fields AGLT and ADEZ in SNOTE/CWB
1398258    DB6: Job REORGCK_ALL places load on package cache
1400843    DB6: Incorrect display of key fields in EXPLAIN
1412719    SNOTE: error when implementing enhancement implementations
1413008    DB6: SQL0206N in function module DB6_PM_LOCKSNAP
1414624    DB6: Performance views if database monitors are deactivated
1414626    DB6: Incorrect display of file system sizes of containers
1415680    Note Assistant: Incorrect status in subsequent systems
1421157    DB6: SQL error 204 when accessing table DBSTATC
1425487    SE24: Error regarding READ-ONLY for complex attributes
1426092    DB6: Incorrect DROPPED TABLE clause for tablespaces
1426480    DB2: Incorrect display of registry values for DPF systems
1427030    DB6: Container specifications for tablespaces not changeable
1429082    DB6: No REORG after deactivating compression
1429687    DB6: SQL cache performance
1438168    DB6: REORGCHK recommendations for indexes are missing
1444373    DB6: Loading the package cache with monitor functions
1449482    DB6: Error message 'Command LIST_DB2DUMP failed'
1451958    DBA Cockpit: Incorrect start time for jobs
1452197    DB6: SQL error 100 in job REORGCK_ALL
1452502    DBA Cockpit: Jobs are missing in central planning calendar
1455897    DB6: Display of data classes is not updated
1456379    DB6: No display of indexes in data classes
1460895    DB6: SQL0104N during creation of WLM threshold
1462415    DB6: SQL -444 error messages in system log
1462855    DB6: Incorrect database name in HA environment
1464800    DB6: SQL Commands executes automatically on system change
1464858    DB6: COMPUTE_BCD_OVERFLOW during EXPLAIN Test Execute
1469515    DB6: Runtime error GETWA_NOT_ASSIGNED_RANGE in SAPLSDB6MON
1485313    DBA Cockpit: Incomplete system entries after SLD import
1486972    DB6: Parameters for DB/DBM configuration cannot be changed
1489968    DBA: DBA Cockpit WebDynpro does not care about HTTPURLLOC
1496515    DB6: SQL error 1428N when starting the DBA Cockpit
1501130    DB6: SQL error 802 in DB6_DIAG_COUNT_TABLE_ENTRIES
1508074    RZ20: 'Connection' attribute does not report alerts
1509121    DBA Cockpit: Endless loop occurs when starting DBA Cockpit
1511803    DB6: DB_TABLE_DATA_READ does not return data
1521525    DB6: Table display is not sorted
1522617    DB6: Availability of BW-specific functions in DBA Cockpit
1532114    DB6: Too many locks when collecting table history
1536787    DBA Cockpit: WebDynpro Explain - LOADDATA requires a model
1542311    DB6: Runtime error BCD_OVERFLOW in auto maintenance display
1546866    DB6: Runstats_DBSTATC interprets runtime param. incorrectly
1551729    DB6: Incorrect number of key fields in EXPLAIN
1552812    DB6: Use of db2sap functions
1559699    DB6: Missing data in SQL cache display
1559967    DB6: SQL error 206 when collecting the table history
1563327    DB6: SQL error SQL0551N when accessing SYSSTAT.TABLES
1568800    DB6: Error when deleting alert messages
1569592    DB6: SQL error SQL0433N in EXPLAIN
1569669    DB6: Incomplete history for performance data
1571365    DB6: SQL error SQL0443N in alert monitoring of DPF system
1576094    DB6: Database error SQL1751N in partitioning wizard
1597281    DB6: Incorrect compression displays for tables
1599764    DB6: SQL error 1428 when calling transaction SM50
1602403    DB6: No VOLATILE attribute after RUNSTATS or REORG job
1613270    DB6: Runtime error DYNPRO_FIELD_CONVERSION in DBA cockpit
1615698    DBA Cockpit: Incorrect date selection in DB13C
1619084    DBA Cockpit: Runtime err MESSAGE_TYPE_X when alert displayed
1619636    DBA Cockpit: Daily scheduling is not deleted
1624436    DBA Cockpit: Errors when accessing SHM area CL_DBA_SHM_AREA
1639631    DBA Cockpit: Failed schedulings in DB13
1720495    Invalid deimplementation of obsolete notes by Snote tool
Kindly suggest the correct solution to fix the issue.

Dear Deepak
Thanks for quick response.
Note 1462415 - DB6: SQL -444 error messages in system log ( SAP_BW 701 SP7 suggested)
This is already implemented and updated in my 1st message.
Note 978319 - DB6: Incorrectly cataloged table functions
This note can not be implemented due to version issue.
Kindly suggest some more hints on top of what I already did.
Regards
Bipin

Free license and isolation groups

Hello,
We have just installed CPS in our Solution Manager 7.1. The CPS release is Build: M28.17-35130.
The license keys - free - are:
CPS-Basic ProcessServerService.SAP.ApplicationsAPI true
CPS-Basic ProcessServerService.SAP.SolutionManager true
CPS-Basic ProcessServerService.SAP.XBPExternal true
CPS-Basic ProcessServerService.SAP.limit 0
CPS-Basic System.NamedUsers.limit 10
CPS-Basic System.Production true
CPS-Basic company.contract CPS-Basic
CPS-Basic company.name xxxxxxxxxxxxxxx
CPS-Basic product.name SAP Central Process Scheduling by Redwood
CPS-Basic signature 3
CPS-Basic system.id SAP:SOL_00
I have read in the Administratio guide and in other posts that in the free license i cannot define more that one sap system client per isolation group, but I have the doubt of how can I monitor more than one sap system or even more that one client in the same sap system?
Thanks and best regards,
Ana.

Hello Ana,
you can monitor SAP CPS jobs across Isolation Groups from your SAP Solution Manager. That's a special feature of the SAP CPS integration into SAP Solution Manager.
Just import your (Solution Manager) user into all relevant isolation groups (same user name in SolMan and SAP CPS) and then run job filters or custom queries from the Job Management Work Center.
See the second part of my blog /people/martin.lauer/blog/2009/05/28/monitoring-job-chains-with-sap-cps-by-redwood-and-sap-solution-manager for more information how to call CPS filter and customer queries from the Job Management Work Center.
As a prerequisite you will have to setup the connectivity between SAP CPS and SolMan. See the following notes: 1122497, 1054005, 1129030, 1037903.
If you have any issues in setting up this scenario, please do not hesitate to contact me.
Kind regards,
Martin

ST-PI 2008_1_700 upgrade fails on Lower Level SP

Hello all,
We are trying to upgrade our ST-PI component for an ECC 6.0 EhP4 SPS 06
system for end result of connecting/ being managed by our SolMan EhP1 SP25 SLM
system
Current: ST-PI 2005_1_700 SP06
Target: ST-PI 2008_1_700 SP03
The error we receive is: Request/task SAPKA70001 does not exist
We are currently on:
SAP_ABA 701 0006 SAPKA70106
SAP_BASIS 701 0006 SAPKB70106
We are on EhP4 SPStack 06 on most components in the managed system, our Solution Manager is EhP1 SP25
I have tried using KITLRDA (install), KITLRDG (supplement upgrade) and
the main one KITLRDB (upgrade) and all fail or KITLRDG is not
recognized at all.
All with KITLRD1, KITLRD2, KITLRD3
Steps taken:
Tcode SAINT
Load packages KITLRDB, KITLRD1, KITLRD2, KITLRD3 in SAINT OCS queue
Select target KITLRD3 003 > KITLRDB 000
Continue-->
Error: Request/task SAPKA70001 does not exist
During phase ADDON_CONFLICTS_?
Have already entered a SAP message, and there is no information on this error anywhere I can find. Any help resolving this and moving forward with my add-on upgrade would be appreciated.
Thank you

Hi
since you already have add on ST-PI 2005_1_700, please proceed with the delta upgrade cd for ST-PI 2008_1, and apply the latest patch for the same
Please refer SAP Note 1228898 - Installation/delta upgrade of ST-PI 2008_1.
as per that you could use SAPKITLRDB KITLRDB.CAR please check
Jansi

Technical systems in SLD not replicating in LMDB

Hello ,
I am installing new quality solution manger system (QSM) and trying to connect sandbox erp system to QSM .
Already configured SLD and sandbox is visible in it by RZ70 and configured synchronization connection between SLD and LMDb in solman_setup .
Currently on the QSM is available in the LMDB , what should I Do ?
Also for connecting diagnostic agent , In step select SLD it is configured but showing with 0 agents so in connecting diagnostic agents step , when trying to get agents nothing is found .

Hi,
I did not understand what is happening in the LMDB, you say that QSM is there...? What you should do in this case is to perform/finish the system preparation and basic configuration. Once these are finished, do the managed system configuration for the sand box. But before that, review its definition in the LMDB according to this wiki: Maintenance of Product in the System Landscape - SAP Solution Manager Setup - SCN Wiki.
In relation to the SMD agent not being available in the SLD, it's not necessary, it only matters that the agent is connected to the Solution Manager. Connecting it to SLD will enable it to connect it to the Solution Manager, but you can connect it directly to the Solman, skipping the SLD. The steps are described in KBA 1907909.
I recommend using the Java message server port to connect it, you can check the dev_ms file to ensure that the correct port is being used.
Best regards,
Daniel.

SAP Router internal error

Hello
I have installed solution manager 7.0 and then sap router is also configured on the same box.
1. To generate a certificate request,
sapgenpse get_pse -v -r D:\usr\sap\saprouter\certreq -p D:\usr\sap\saprouter\local.pse "CN=sbsapmgrapp01, OU=0000809350, OU=SAProuter, O=SAP, C=DE"
2. Then you have to request the certificate from
http://service.sap.com/tcs -> Download Area -> SAProuter Certificate
3. Create a file D:\usr\sap\saprouter\srcert and copy the requested
certificate into this file. :
sapgenpse import_own_cert -c D:\usr\sap\saprouter\srcert -p
D:\usr\sap\saprouter\local.pse
4. To generate credentials for the user that's running the SAProuter
service:
sapgenpse seclogin -p D:\usr\sap\saprouter\local.pse -O sapadmin
(this will create the file "cred_v2")
5. Check the configuration:
sapgenpse get_my_name -v -n Issuer
(Result: "CN=SAProuter CA, OU=SAProuter,
O=SAP, C=DE")
6. Create SAProuter service on Windows :
ntscmgr install SAProuter -b D:\usr\sap\saprouter\saprouter.exe -p
"service -r -R D:\usr\sap\saprouter\saprouttab -W 60000 -K "CN=sbsapmgrapp01, OU=0000809350, OU=SAProuter, O=SAP, C=DE"
7. Edit the Windows Registry key :
MyComputer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SAProuter\ImagePath
8. Start the SAProuter service -- success
9. Enter the parameters in OSS1 -> Technical Settings -->
hostname : sbsapmgrapp01
IP: 10.1.0.112
instance : 00
SAP host name : sapserv2
IP: 194.39.131.34
instance:99
10. saprouttab
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.0.112 3200
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P 10.1.0.112 194.39.131.34 3299
deny all other connections
D * * *
when I check the sap-oss connection i am getting internal error. Any help would be appreciate..
Thanks
seshu

Hi Rahu
Thanks for your response. Here is my saprouttab entry's
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local Solman System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 10.1.0.112 3200
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P     10.1.0.112     194.39.131.34     3299
P     10...*     194.39.131.34     *
Here is my dev_rout file..
trc file: "dev_rout", trc level: 1, release: "700"
Thu Oct 16 02:08:22 2008
SAP Network Interface Router, Version 38.10
command line arg 0:     D:\usr\sap\saprouter\saprouter.exe
command line arg 1:     -r
command line arg 2:     -R
command line arg 3:     D:\usr\sap\saprouter\saprouttab
command line arg 4:     -W
command line arg 5:     60000
command line arg 6:     -K
command line arg 7:     p:CN=sbsapmgrapp01, OU=0000809350, OU=SAProuter, O=SAP, C=DE
SncInit(): Initializing Secure Network Communication (SNC)
      PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/64/64)
SncInit(): Trying environment variable SNC_LIB as a
      gssapi library name: "D:\usr\sap\saprouter\sapcrypto.dll".
File "D:\usr\sap\saprouter\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.0) to SECUDE 5/GSS-API v2
main: pid = 1684, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
reading routtab: 'D:\usr\sap\saprouter\saprouttab'
Thu Oct 16 09:14:17 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 256
    (SI_ECONN_REFUSE/10061; I4; ST; 194.39.131.34:3299) [nixxi.cpp    2823]
Thu Oct 16 09:14:20 2008
***LOG Q0I=> NiPConnect2: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 2823]
ERROR => NiPConnect2: SiPeekPendConn failed for hdl 2 / sock 256
    (SI_ECONN_REFUSE/10061; I4; ST; 194.39.131.34:3299) [nixxi.cpp    2823]
Kindly suggest the changes in my saprottab file..
Thanks
seshu
Issue resloved..
Edited by: Seshagiri Rao Myneni on Oct 16, 2008 7:31 PM

Connecting EP 7.0 to Solman

Similar Messages

Maybe you are looking for