Connecting Equium A100 to a TV

I have an Equium A100-147 and a TV (Type is KV28FX).
I wanted to connect the A100 to the lap tpo to view some pictures.
I have tried connecting with a S to S lead, and a S to scart lead, neither of which work. Can anyone suggest an answer?

ensure that both ends are connected (one from your laptop to your tv). once thats done, right click on your
desktop and from the drop-down menu go to Graphic Options, then to Output To from which select Intel Dual Display Clone. Finally click on one of the options from that menu and you should get your output on both screens.
good luck!!

Similar Messages

  • How to connect Equium A100 and second computer via LAN

    hi,
    i was wondering if someone could help me.
    My partner and me are having some difficulties with creating a LAN between his computer and my laptop.
    Basically the gist of it is that his computer can see my laptop, but it's not recipricating.
    My laptop is the Equium A100 (XP media centre) and all we really know about his computer is that its dual pentium 4, windows XP home edition and that is is a complete pain in the rear end!

    Hello
    Check this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170
    There is described how you can connect two PCs using crossover cable.

  • How to connect my Equium A100 to the TV?

    HELP.....
    I am not very good with all this tech stuff.............my age I think!!...........I am trying to connect my Panasonic TV to my PC with a VGA cable but get a 'No Signal' message on my TV..........I have been told to try a 'S' video cable but why then do I have a VGA port?
    All I want to do is watch stuff on my TV from my PC..............Any help out there please would be most welcome.,,,,,,.My Laptop is an Equium A100....

    I also think you should use S-Video cable for connection. I used it with my old Tecra M3 to connect to old Samsung TV. Everything worked fine.
    As Keany already wrote, when you connect notebook to the TV be sure right port is enabled. Maybe you can do this using AV button on the TV remote controller.
    After enabling right port on TV use FN+F5 key combination to switch from LCD to TV.

  • Want to connect Motorola Razr to Equium A100

    Can anyone help?, I want to connect my Toshiba Equium A100 to the internevia bluetooth and my Motorola Razr but cannot find any drivers etc, where can I get these?

    Hello Robert
    First of all you must be sure if your notebook has BT or not. Every notebook with BT has a BT label at the bottom site. Check it at first. Later we can continue discussion how to connect your mobile phone with Equium A100.
    http://aps.toshiba-tro.de/bluetooth/pages/faq/bluetoothnotworking.html

  • Equium A100-063 PSAAQE: WLan signal interrupts

    Hi
    i'm italian so excuse me for my english.
    The 23rd of March Ive bought the Notebook EQUIUM A100-063 PSAAQE.
    Unfortunately I have found a problem that I can't resolve although numerous test I've tried.
    After some minute the connection wireless to my Router DLINK DSL-G624T falls and I must repeat the procedure of connection to Internet although the radio signal is always excellent, but after some minutes the line falls again.
    I approach without proplems with pocketpc and another notebook to the same router.
    Currently I have configured WEP key but I have tried also with WAP key, and also without key, moreover I have tried various names of SSID and to set up the IP in static mode and also in dynamic mode.
    I've verified that the version of the card Wireless driver is the last one.
    Can you help me in some way, please?

    Thanks for your answer. I've verified that the probable source of my problem is due to interference on the channel radio setting. When I've changed the channel from 6 to 11 the connection is remained stable for an hour until the problem has been repeated.
    In the same time the problem has been repeat, another Access Point has been activated on the radio channel 11 like my router, therefore I've configured my router in channel 9 and I don't have more problems.

  • Equium A100 (PSAAQ) LAN Card issue

    Dear All
    I am using *Equium A100 (PSAAQ)* laptop for past 3 years. Suddenly it developed a typical kind problem. I am using Vista. The LAN is installed and I was able to access network through it till copule od days back. Now even though LAN card is installed, *loop back test also passes* with good speed but even though the cable is incerted it says *Cable Unplugged*. The same cable is working on other system. I tried to connect another working cable but result is same *"Cable Unplugged"*. If anyone can help me solve this problem.
    Thanks
    Manish

    Dear Jeffrey
    Thanks for your reply. I had update of Vista till the 6th of April and after that the LAN card gave this problem. I am connected to network through a 10/100 switch provided by the Internet service provider. The same switch and same port is working for other laptop/desktop in the network. Till last use, network card was working fine. suddenly one fine morning that is 7th April it showed "Cable not connected" warning. I tried all possible ways that is : reconnect, re crimp, change the cable, re install the LAN Card etc, except for reinstalling the OS. One more thing, Initially the cable provided by our network provider was not six core, instead he provided 4 core wire (You know cost cutting for them). The problem came with 4 core wire and now they have provided six core wire even then the problem persist.
    Thanks once again
    Manish

  • Equium A100 black screen on startup

    Toshiba Equium A100 laptop
    Completely black screen on startup so please don't say go into safe mode etc, because I can't.
    I can't see a thing.
    Like once in every 100 goes it will come on and I can F12 to boot from the format disk but it eventually freezes before completion.
    Video showing what's happening - BTW the buttons you see me pressing are Fn+F5 I've heard that that sometimes works, but yeah, it didn't.
    http://www.youtube.com/watch?v=Sb7KcROckVI
    Thanks.

    Hi
    Look not good dude I think its an serious hardware issue
    I checked the movie and cannot hear a beep when the notebook passes the POST (power on self-test). So for me it looks like something wrong with the hardware
    But did you try to connect an external monitor in order to check if something would be visible on second screen? Check this
    You could also try this:
    Disconnect AC adaptor, remove the battery, wait some time (3-5 hours), then connect both parts and try to power up the notebook. If this fails, well in such case have no many other ideas. Ohhh wait maybe you could check the RAM modules. Try to power up the notebook using one module in each slot

  • 3G Dongle on Equium A100-337

    3 network dongle on Tosh Q .
    3connect, (3's connection software) shows that dongle is connecting to 3's network. BUT will not connect on this laptop, The dongle works fine on my other laptop.
    So dongle is ok.
    Laptop says, cannot connect. etc etc do you want to try again? try again. Same.
    uninstalled reinstalled etc etc etc. Tried other usb ports etc.
    initially tosh sees device as mass storage, ok uit has software on it, so it is. then sees it as modem, tried updating drivers etc from the dongle. does not work. AM I missing something??
    Dongle is a ZTE MF112
    Any help.

    Further details of Tosh
    Model is Equium A100 337
    Did not have all details last night as it is wifes laptop

  • After stand by screen is frozen - Equium A100

    I have just bought an Equium A100-306 and this is my first laptop (have always had desktops) so not sure if it is me that is doing something wrong..... After being left unused for a while, my laptop goes into standby mode. If the laptop is open the power on button flashes orange, I press this to come back out of standby but when it wakes up the screen is frozen.... there is also a note that comes up at the bottom saying network cables are not connected (even though I haven't touched anything).
    The only way I have found to get out of this is by pressing and holding the power button and then starting the computer up again, it works perfectly again when its back on?
    Would be grateful of any help?
    Rach

    Hi Rachel
    Such issues are always strange and I think we can only suggest what could be wrong or what could help.
    Hmm you said there is a messages saying the network cables are not connected.
    I think you should firstly disable the power saving in the device manger -> LAN properties and disable the Link Down power saving in the advanced tab.
    I have also checked the driver page and it seems there is a new BIOS released. You could try to update the BIOS to the newest version and check if you use the newest LAN driver version.
    Good luck

  • Black screen on Equium A100-306 after watching movie on external projector

    Hi!
    I've got Equium A100-306 Laptop and it was working fine. Yesterday I plugged in a projector and watched the movie.
    Once i finished the movie i switch it off and disconnected the projector.
    After few hours later i tried to switch my laptop and found that the inital screen loads up after that there's nothing in the screen.
    I could go in the BIOS but couldn't go the Safe mode. I still remember i did use Fn and F5 key but nothing comes up so any help could be much appreciated.
    As the initial screen loads up i don't think there's a problem on screen neither on graphic card as the toshiba logo shows up at the starting.
    Can anyone help to figure out if tht's a hard disk problem may be.

    Hmm for me it looks like the display was set ONLY to an external display device (projector, external monitor, etc) and therefore you are not able to see anything on the notebooks internal screen.
    I think you should connect the projector or an second external monitor to this notebook and should try to set the display back to the default settings (notebook screen only)
    The FN+F5 combination should help you.
    As far as I know the notebook changes the screen output in this order:
    *Internal screen* *(CRT) external screen + internal screen* *(CRT) external screen only* *TV (s-video out) + internal screen* *TV only (s-video out)*
    So possibly you have chosen the last device (s-video out only)

  • Re: LAN not working on Equium A100-02K PSAAQE

    I have an Equium A100 - 02K, Model PSAAQE - 00N00LAV, S/N 57015844Q running Vista Home Premium.
    Recently the LAN connection via cable failed although the wireless connection to the internet still works. There is no light displayed on the LAN socket when connected and the router does not show a connection. Running task manager shows that there is a problem with the LAN driver. I have reloaded the driver but still task manager shows a driver problem.
    Is this a hardware problem or are there further steps I can take such as checking in the BIOS?

    Hi
    I think its a only a software issue.
    Please access the device manger and uninstall the LAN driver (you can mark the LAN card and could remove it too)
    Then reboot the notebook!
    By the way; what error code appears in device manger near the LAN card?

  • Re: EQuium A100-147, wont start, \windows\system32\config\system -missing-

    This laptop Equium A100-147started not connecting to internet normally, but would in safe mode.
    So after trying virus scans-nothing.
    System restore-nothing. I decided to put in the recovery disc and reinstall windows media.
    I changed boot sequence to install it, changed boot sequence back to original.
    It has reinstalled but will not go by the Windows Screen, A message has come up \windows\system32\config\system -missing or corrupt.
    I cannot even see a way of doing a repair with this recovery disc??
    Any help would be appreciated
    thank you in advance.

    That error means the Registry is corrupted.
    The registry is made up from the following files:
    c:\windows\system32\config\system
    c:\windows\system32\config\software
    c:\windows\system32\config\sam
    c:\windows\system32\config\security
    c:\windows\system32\config\default
    You can restore these Registry files from the hidden System Restore folder on C: Drive.
    Here are the instructions:
    http://support.microsoft.com/kb/307545

  • Does my Equium A100-147 have an internal microphone?

    Hi,
    I can hear others during a voice chat but no-one can hear me. I have tried using an external micrphone but nothing changed. I have gone through Control Panel and tested my microphone. A sound seems to play but I can't hear anything else.
    Please respond.
    Thanks
    Sashinath

    Hi sashinath
    Happy New Year
    It seems the Equium A100-147 does not support the internal mic and therefore you have to connect the external microphone if you want to speak to everyone in the vice chat.
    You could use any microphone.
    I use a skype for communicating and I have connected a headset. Its a headphone with the microphone.
    After connecting of the external mic you should check the sound and audio options in the control panel and check if the mic was enabled.

  • Equium A100-147 doesn't boot up - no display on screen

    Hi,
    I have a Toshiba Equium A100-147. When I switch it on, I can see the LED's light up but there is no display on the screen.
    I read on a previous thread on a similar model that this was fixed by resetting the computer.
    I understand there is a possibilty that this is an issue with the motherboard, however I remain hopeful that a manual reset might work.
    Can someone please tell me how this can be done??

    You could try this short and simple procedure;
    - remove the battery from the notebook
    - disconnect all external 3rd party devices and the AC adaptor
    - leave the notebook for about 20-30min
    - then connect battery and AC adaptor again
    If the notebook will not power up after this procedure then your have a serious hardware issue and only the ASP could help you.
    I dont want to make any statement about the possible faults because its always difficult to say whats wrong exactly but it looks a little bit like a mobo issue.
    Bye

  • Question about memory upgrade in a Equium A100-027

    Hi there,
    I have an Equium A100-027 notebook with 2 x 512 MB RAM installed. I'd like to add extra memory.
    I have used Crucial's (www.crucial.com) website to scan my system and recommend memory modules. According to Crucial the A100-027 will support 2 x 2 GB modules giving 4 GB in total.
    However a quick search using Google suggest I can only install 2 x 1 GB (2 GB in total) modules.
    Can anyone clarify please.
    Thanks in advance,
    Stephen

    No, guys. The machine can be upgraded up to 4GB since the chipset is able to handle 4 Gigs of RAM.
    That means you will have to place 2 x 2GB in the slots of the machine and you will have your upgaded system. :)
    One of my machines is a A100 (European - but it doesnt matter which country, chipset is worldwide the same) and Ive upgraded it to 4 Gig with kingston RAM.
    Hope I could help...
    Cheers

Maybe you are looking for