Connecting everything

I am replacing a Sony Wega 32"  with a flat panel. I have basic Time Warner cable (no box), a 12 year old Sony A/V  surroundsound reciever,  a JVC combo VHS/DVD player, a second DVD player ( these both use the red, white, yellow rca cables, and an old Nintendo64 game system which also connects with the 3 plug rca cable. I have no plans to upgrade my cable service. I do have a digital antenna converter box but no antenna. I want to buy a flat panel set of equal or slightly larger screen than the Wega. What can you recommend?

Well a 37 is almost kind of the new 32. In either size or the 32 and 37 or even 40 inch tvs, you will be looking at LCD HD TV. Sadly, if you do not upgrade your cable service you will not be able to see the HD picture so it will be wise in your case to look ta 720P tvs just because 1080P is not something you should purchase since will not be upgrading to HD cable service. However 1080P would be a wise investment so you are set for the future andyou won't be outdated in a 2 years time or less. Plus if you plan on getting a Blu Ray player, a Xbox 360 or a Playstation 3, then a 1080P tv would also be a good idea. If you plan and just sticking with what you got, then a 720P tv is more then enough although your picture will not look as clear due to your digital units being used on a HD tv, they tend to mix like oil and water. You can purchase an antenna and you will be able to get your local channels in HD, but it will only be about 4 or 5 stations. Your converter box will never be used again so get rid of it. Samsung, Sony and LG are all great brands to look at, but even Best Buy's brand Insingnia gets good reviews on Consumer Report and is a good investment if you are on a budget.
Please note that whatever I state in these forums is not a direct response from Best Buy or Geek Squad. My posts are just my own personal insights.

Similar Messages

  • Bought Apple TV off a friends friend. Connected everything. Won't accept my ID or password ?

    I bought Apple TV from a friends friend and have tried putting in my Apple ID and password and it keeps saying they are not recognised! I have connected everything correctly how do I fix this?

    This is the iPad forum for Apple Tv issues post in the Apple TV forum here:
    https://discussions.apple.com/community/appletv/appletv
    I have requested the hosts move the post there anyway.

  • I formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated  why  and how can i fix this i bought it for my daughter for x m

    i formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated  why  and how can i fix this i bought it for my daughter for x mas and that is tomorrow

    AdaS_VZW,
    I'm not sure if the area has been surveyed; it's a large group of apartment buildings about a within a couple miles of Dulles International Airport in Northern Virginia, so I would imagine that it probably has, but I'm not sure. How would I find out?
    I understand that the Network Extender does not support LTE connections (I know there are two models, the 1x-only and 3g, both made by Samsung - I have the 3g model, SCS-2U01). I know that it can support a 3G data connection, but that should be irrelevant - I'm always connected to my wifi network in my apartment.
    What's particularly vexing, however, is that both a Galaxy S4 and Galaxy Nexus in my apartment (the other lines on my account) do not seem to have this issue. While I haven't done so with the S4, the Nexus exhibits this problem when my SIM is in it - and again, this is a fresh SIM from just a few weeks ago.
    I'm currently trying to disable Mobile Data when in the apartment to see if that will make it more stable. I'll post in a day or two with results from that.
    Shawn

  • How will I connect everything to Thunderbolt?

    I'm considering upgrading to a new MBP and am curious about Thunderbolt.  Currently, I hook my current MBP to a 27" Cinema Display.  The ACD plugs into my MBP with two connectors - USB and DisplayPort.  This leads me to a few questions ...
    1)  If I upgrade to a new MBP with Thunderbolt, and plug the ACD into the one Thunderbolt port, I wouldn't be able to connect any other Thunderbolt peripherals in, yes? 
    2)  If I used the USB or Firewire ports on the back of the ACD with a Thunderbolt adaptor, that wouldn't give me Thunderbolt speed, would it?
    3) So my main question is what do I plug into the MBP's Thunderbolt port so that I can use the ACD and other peripherals? 
    ... and 4) Is there some sort of Hub for Thunderbolt?
    Thanks in advance ...

    Thanks for the quick reply.
    It's sort of a drag, as it means I'd have to keep things plugged in full-time (to keep the monitor connected) that I now plug in only occasionally.  Oh well ...

  • Connected everything on my new (previous gen...not the new tower, mind you) TC, but can't get beyond flashing yellow.  Had to reconnect my old router to send out the "HELP!" request.  Can anyone advise, please?

    Please advise.  I just tried connecting my newly purchased (previous generation...not the newest "Tower" model) Time Capsule, but cannot get beyond the "blinking yelow light".  I had to connect up my old router (the one I'm trying to replace with this new TC) just to send this help request.  Can anyone please advise an old dude?

    If you pulled out an existing router.. then you have a modem.. what modem is that? Explicit details help loads.. and loads.. and even more loads.. we cannot guess solutions without knowing the setup.
    But you can simply configure the TC in bridge mode.. do it directly connected to the TC with ethernet wire.. LAN TC to computer and configure it in bridge.
    Then setup wireless any way you want..
    You can turn it off and still use the wireless on the old router.
    You can setup a new wireless network.. and connect to that.
    Or you can setup roaming network, ie use the same wireless name and same security settings and password as the existing router.. assuming it also has wireless.
    Do nothing at all and it will still work..

  • Just set up the time capsule, connected everything per the set up  instructions, can't get the amber light to stop blinking.

    I have tried to re-start my modem and the time capsule, both to no avail.The amber light keeps blinking, and the software cannot find it wirelessly.

    Reset it to factory and redo the setup.. this happens a lot now if you have moved on the Mavericks..
    Make sure ipv6 is set to link-local for your wireless.
    Otherwise use an iOS device with the latest firmware and use the airport utility for iOS.. it is much more reliable than the computer version.

  • My Mini-DVI to HDMI to TV connection stopped working - tried everything

    I have been using a generic mini-dvi to hdmi dongle plus a HDMI cable to connect my white intel imac to my television. It has worked great and flawlessly until very recently. Now the TV says "no signal". Screen still flashes blue when dongle is plugged in/out. Flashes blue when TV turned on/off. Nothing was changed in my setup. I have tested the mini-dvi port with the Apple Mini-DVI to S-video/video dongle (worked), tried a new minidvi-hdmi dongle (fail), tested the HDMI cable (good), and tested other ports on the TV, as well as resetting the TV to defaults. Still not working.
    At this point, I was assuming it was a software problem, even though starting from a restore disk or in safe mode did not solve this. Could this be a software issue? Is my video card only doing analog signals? My TV is less than 6 months old, so I doubt its that. Any advice would be greatly appreciated. I usually can solve these things myself, but this time it's vexing me. Thanks.

    Hi kp
    Disconnect everything and reset the SMC > http://support.apple.com/kb/HT3964
    +1. Shut down the computer.+
    +2. Unplug the computer's power cord.+
    +3. Press and hold the power button for 5 seconds.+
    +4. Release the power button.+
    +5. Attach the computers power cable.+
    +6. Press the power button to turn on the computer.+
    and restart with a PRAM reset > http://support.apple.com/kb/HT1379
    +1. --Shut down the computer.-- +
    +2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.+
    +3. Turn on the computer.+
    +4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.+
    +5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.+
    +6. Release the keys.+
    Shutdown the iMac +(personally I do not like hot-pluging)+ and re-connect everything in the following order.
    Cable to TV > Adapter to Cable > Adapter into the iMac (last) > turn on TV > startup the iMac > Open the Display Preference and select your personal settings.
    Dennis

  • My itunes said I needed an update, I unplugged the ipod touch and reset everything. When "connect to itunes" showed on the screen, I plugged it back in and Itunes no longer recognizes it.  I tried 4 usb cables, 4 different computers, all new itunes

    I've gone through all the troubleshooting of restarting computers & itunes and updating itunes.  Trying to put in to DFU mode.  I've tried everything.   iTunes just doesnt recognize this ipod.   I have multiple ipods/iphones, and everything else works.   I am eliminating the people who are saying it's a broken pin, that cannot be it, because immediately before that moment, it was connected, everything on my ipod was listed in iTunes.  It just promted me to update to 6.0.1 (or whatever the most recent is)  I also seen a lot of issues posted on the web of people who had jailbroken phones.  This ipod touch is standard, there were no jailbreaks or anything used ever.  
    There was a program called Wondershare Dr.Fone, which is said to be a photo recovery tool for ipods, to retrieve recently deleted photos.  (Guess I shouldn't have been trying to do that)  I downloaded this trial and when it opened it stated that Itunes and this could not run at the same time.  It shut down iTunes automatically.  At that point, I didn't do anything more with the Wondershare Dr. Fone, I didn't try to run the program or anything.  iTunes prompted me that the device needed to be upgraded to 6.0.1.  I had an option to download or download and install the updated 6.0.1 from Itunes.  I clicked on download only.  So iTunes was downloading the new version from my iPod Touch.  I shut it down the Wondershare Dr. Fone, unplugged the iphone from itunes/computer, went in to settings and did a master reset.  I plugged the device back in to the computer when the iTunes logo and usb came on the screen, and the computer/iTunes doesn't recognize it anymore.  I've tried 4 different usb cables and four different comuters all with up to date iTunes software.  I did not break the port either, nothing is inside the port, or blocking it in anyway.  All 4 computers and usb cables connected fine to other ipods and iphones.  
    So the questions are:
    How can I get my ipod out of restore mode (iTunes logo and usb cord sybol) without iTunes recognizing it?
    What could I have possibly done to this ipod? 
    Why doesn't anyone have the answer anywhere on the internet?
    (Note:  Even if the Ipod is placed in DFU mode, iTunes does not recognize it) 
    Please help!
    Yours Truly,
    Me & My UnRestorable IPOD TOUCH

    Hello Philly,
    I believe that when you reset your ipod(command given from the computer, right?)  touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
    I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
    ~Remember, I am just giving an educated guess on limited information

  • SCVMM losing connection to cluster nodes

    Hey guys'n girls, I hope this is the right forum for this question. I already opened a ticket at MS support as well because it's impacting our production environment indirectly, but even after a week there's been no contact. Losing faith in MS support there
    The problem we're having is that scvmm is that a host enters the 'needs attention' state, with a winrm error 0x80338126. I guess it has something to do with the network or with Kerberos, and I've found some info on it, but I still haven't been able to solve
    it. Do you guys have any ideas?
    Problem summary:
    We are seeing an issue on our new hyper-v platform. The platform should have been in production last week, but this issue is delaying our project as we can't seem to get it stable.
    The problem we are experiencing is that SCVMM loses the connection to some of the Hyper-V nodes. Not one
     specific node. Last week it happened to two nodes, and today it happened to another node. I see issues with WinRM, and I expect something to do with kerberos. See the bottom of this post for background details and software versions.
    The host gets the status 'needs attention', and if you look at the status of the machine, WinRM gives an error. The error is:
    Error (2916)
    VMM is unable to complete the request. The connection to the agent cc1-hyp-10.domaincloud1.local was lost.
    WinRM: URL: [http://cc1-hyp-10.domaincloud1.local:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_Service], Filter: [select * from Win32_Service where Name="WinRM"]
    Unknown error (0x80338126)
    Recommended Action
    Ensure that the Windows Remote Management (WinRM) service and the VMM agent are installed and running and that a firewall is not blocking HTTP/HTTPS traffic. Ensure that VMM server is able to communicate with cc1-hyp-10.domaincloud1.local over WinRM by successfully
    running the following command:
     winrm id –r:cc1-hyp-10.domaincloud1.local
    This
     problem can also be caused by a Windows Management Instrumentation (WMI) service crash. If the server is running Windows Server 2008 R2, ensure that KB 982293 (http://support.microsoft.com/kb/982293)
    is installed on it.
    If the error persists, restart cc1-hyp-10.domaincloud1.local and then try the operation again. /nRefer to
    http://support.microsoft.com/kb/2742275 for more details.
    Doing a simple test from the VMM server to the problematic cluster node shows this error:
    PS C:\> hostname
    CC1-VMM-01
    PS C:\> winrm id -r:cc1-hyp-10.domaincloud1.local
    WSManFault
        Message = WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this
    computer. By default, the WinRM firewall exception for public profiles limits access to remote computers within the same local subnet.
    Error number:  -2144108250 0x80338126
    WinRM cannot complete the operation. Verify that the specified computer name is valid, that the computer is accessible over the network, and that a firewall exception for the WinRM service is enabled and allows access from this computer. By default, the WinRM
    firewall exception for public profiles limits access to remote computers within the same local subnet.
    I CAN connect from other hosts to this problematic cluster node:
    PS C:\> hostname
    CC1-HYP-16
    PS C:\> winrm id -r:cc1-hyp-10.domaincloud1.local
    IdentifyResponse
        ProtocolVersion =
    http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd
        ProductVendor = Microsoft Corporation
        ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0
        SecurityProfiles
            SecurityProfileName =
    http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos
    And I can connect from the vmm server to all other cluster nodes:
    PS C:\> hostname
    CC1-VMM-01
    PS C:\> winrm id -r:cc1-hyp-11.domaincloud1.local
    IdentifyResponse
        ProtocolVersion =
    http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd
        ProductVendor = Microsoft Corporation
        ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0
        SecurityProfiles
            SecurityProfileName =
    http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos
    So at this point only the test from the cc1-vmm-01 to cc1-hyp-10 seems to be problematic.
    I followed the steps in the page
    https://support.microsoft.com/kb/2742275 (which is referred to above). I tried the VMMCA, but it can't really get it working the way I want, or it seems to give outdated recommendations.
    I tried checking for duplicate SPN's by running setspn -x on affected machines. No results (although I do not understand
     what an SPN is or how it works). I rebuilt the performance counters.
    It tried setting 'sc config winrm type= own' as described in [http://blinditandnetworkadmin.blogspot.nl/2012/08/kb-how-to-troubleshoot-needs-attention.html].
    If I reboot this cc1-hyp-10 machine, it will start working perfectly again. However, then I can't troubleshoot the issue, and it will happen again.
    I want this problem to be solved, so vmm never loses connection to the hypervisors it's managing again!
    Background information:
    We've set up a platform with Hyper-V to run a VM workload. The platform consists of the following hardware:
    2 Dell R620's with 32GB of RAM, running hyper-v to virtualize the cloud management layer (DC's, VMM, SQL). These machines are called cc1-hyp-01 and cc1-hyp-02. They run the management vm's like cc1-dc-01/02, cc1-sql-01, cc1-vmm-01, etc. The names are self-explanatory.
    The VMM machine is NOT clustered.
    8 Dell M620 blades with 320GB of RAM, running hyper-v to virtualize the customer workload. The machines are
    called cc1-hyp-10 until cc1-hyp-17. They are in a cluster.
    2 Equallogic units form a SAN (premium storage), and we have a Dell R515 running iscsi target (budget storage).
    We have Dell Force10 switches and Cisco C3750X switches to connect everything together (mostly 10GB links).
    All hosts run Windows Server 2012R2 Datacenter edition. The VMM server runs System Center Virtual Machine Manage 2012 R2.
    All the latest Windows updates are installed on every host. There are no firewalls between any host (vmm and hypervisors) at this level. Windows firewalls are all disabled. No antivirus software is installed, no symantec software is installed.
    The only non-standard software that is installed is the Dell Host Integration Tools 4.7.1, Dell Openmanage Server Administrator, and some small stuff like 7-zip, bginfo, net-snap, etc.
    The SCVMM service is running under the domain account DOMAINCLOUD1\scvmm. This machine is in the local administrators group of each cluster node.
    On top of this cloud layer we're running the tenant layer with a lot of vm's for a specific customer (although they are all off now).

    I think I found the culprit, after an hour of analyzing wireshark dumps I found the vmm had jumbo frames enabled on the management interface to the hosts (and the underlying infrastructure does not).. Now my winrm commands started working again.

  • MacBook Pro(Mid 2012) Can't connect to my Dynex TV with mini display port to VGA adapter

    I have a MacBook Pro(Mid 2012, running  OS X 10.9.4) and I recently just bought a mini display port to VGA adapter so I could hook it up to my dynex TV but when I connect everything my TV says no signal.  Do I need to do something in settings?

    Hi psikalis,
    If you are having issues connecting an external display to your MacBook Pro, you may find the information and troubleshooting steps in the following articles helpful:
    OS X Mavericks: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH13814
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Regards,
    - Brenden

  • How do I connect Apple TV2 to an older TV?

    Hi Apple Community
    I just bought 2 Apple TV2s, one for my family room and one for my bedroom. My family room TV is a late generation Sony WEGA (Trinitron/CRT) with a YPbPr (RGB RCA) port in the back of it. I knew that AppleTV2 did not have a component video connection, so I bought a cheap HDMI to component signal converter to connect to the YPbPr port.
    Well, when i connected everything up all I get are crazy lines on the screen (clearly there is a signal translation issue). In theory everything should have worked. I am sure this issue has come up for others in the community - is there an HDMI converter box that you would recommend that will work in this situation? I looked online and there seem to be half a dozen candidates, but I'd like to get an opinion from this forum. Any thoughts?
    Dude

    I'm not really willing to recommend any converters since most of them will run into an issue with HDCP which is included in iTunes content purchased and rented from the iTMS since component doesn't support HDCP. Any conversion device that circumvents such copy protection cannot be discussed in these forums under it's terms of Use.
    I have one thought about the converter you have purchased, check that your TV is YPbPr and not YCbCr.

  • I need to connect my macbook to my tv via HDMI but im using windows vista

    I bought the mini-dvi to dvi adapter and a 6' dvi to hdmi cable at the apple store today. but i cant seem to get the display up after connecting everything. I tried going to the display settings and activating the 2nd monitor, but that doesnt work and my tv keeps the "no input" display screen on.

    not sure if this will work but i had a similar problem. first you may want to invest $20 into a mini-dvi to hdmi cable from onsale.com
    2nd, after you hook it up...turn your laptop on and close your lid immediately. using your wireless keyboard start up your windows with bootcamp. what happens is once you close your lid immediately, it will detect the tv as the only moniter.
    hope this helps. this solved my problem with using closed lid mode and bluetooth waking problems. let me know if this helps.

  • How do I connect Apple TV and surround sound to my projector?

    My current set up is that I have a projector connected to my Blu-Ray player. My surround sound speakers connect to my Blu-Ray player. They all came in the box together and the speaker wires all go into the Blu-Ray. Everything works perfectly.
    However now I have bought an Apple TV and although I can play it through the projector, the sound is only through the projector and not the surround sound. I tried plugging the Apple TV in the HDMI in the projector and then connecting the Apple TV to the Blu-Ray via optical cable, but that didn't work.
    In the back of the projector there is 1 HDMI port and an audio port but no optical port
    In the back of the Blu-Ray, you have the speakers, the HDMI, the audio in and the optical port.
    How can I connect everything so that I can use my Apple TV with surround sound?

    The manual doesn't say anything an optical port on the BD ?

  • IPad connected to TV using dim not working with iOS 7.0.2

    Since updating my iPad to iOS 7.0.2, connecting my iPad 4 using hdmi to my tv is not working.
    In fact, when connected, everything on my iPad is in slow motion. The iPad moves in slow motion. And there is no image being mirrored on the tv. This use to work fine before the update. Any ideas?

    (A) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Reset all settings
    Settings>General>Reset>Reset all settings
    Note: Data will not be affected but settings will be reset.

  • IPod Touch 1G "touch-screen freeze" after Wi-Fi connect (since 1.1.4) + log

    Hi everybody,
    I have a big problem with the touch-screen since approximately 2 months.
    The problem is:
    1. I turn on my iPod Touch 1G (Firmware 3.0), works
    2. I activate my Wi-Fi (it connects, wi-fi bar is visible), works
    Then the real problem starts (mainly while and after using Safari, sometimes even without using it)
    After a few seconds the iPod freezes.
    The strange thing is, only the touch-screen itself seems to be "deactivated"
    If I leave the iPod calm for some minutes I am able to "unlock" it again.
    All in all it seems, that the iPod deactivates the touch-screen after being connected to the Internet, because if I turn off the Wi-Fi connection, everything works fine.
    This problem appeared since firmware 2.0 (1.1.3 worked fine i think) and now I have 3.0 and it is still the same problem.
    Already downgraded, upgraded, jailbreaked, un-jailbreaked it. I tried everything.
    Another solution to come to my Home-Screen is to Lock/Unlock a few times, sometimes this works.
    I renewed the firmware more than once (10-15 times) and still do not ger rid of this problem. (Also in "recovery" mode)
    Same thing with Youtube:
    1. Starting Youtube
    2. (If I am able to search a video) selecting a video
    3. Video plays, but no touch-pad reaction anymore
    I am not able to work with it anymore.
    And I am sure it is a software problem, due to the fact the touch-screen reacts(!).
    _A "forced restart" (Home + Lock Button hold for a few seconds) does not help, problem is still the same._
    Thanks to everyone who has an idea.
    I am happy about every kind of information which could help to solve this problem.
    Greetings
    Eimer
    P.S. If you need some more information about the iPod e.g. do not hesitate to ask.
    Here is my Log (out of the newest "iPhone Utility Program")
    ==== Attached at 2009-06-22 21:41:04 +0200 ====
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: dress 00:1d:4f:1f:0f:e3
    Mon Jun 22 21:21:35 unknown com.apple.launchd[1] <Notice>: * launchd[1] has started up. *
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x::setMulticastMode(): WiFi not powered on (0x5)
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x::setMulticastList(): WiFi not powered on (0x5)
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AirPort: Link Down on en0
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: Command line options and current values used by driver
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvel-debug=0x88
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvell-feature-flags=0x3f
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: mrvl.ps.unicast_timeout=100
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: mrvl.ps.multicast_timeout=10
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: mrvl.ps.entrance_timeout=15
    Mon Jun 22 21:21:40 unknown com.apple.launchd[1] <Warning>: (com.apple.BTServer) open("/var/logs/BTServer/stdout", ...): No such file or directory
    Mon Jun 22 21:21:40 unknown com.apple.launchd[1] <Warning>: (com.apple.BTServer) open("/var/logs/BTServer/stderr", ...): No such file or directory
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvell-powersave-listenint=1
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvell-retry-limit=15
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: marvell-sdio-pulldowns=-1
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: WTE=0x0
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x::setPowerStateGated(): 0 -> 1, 0xc0cd5000
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: Loading Main Program
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x: Firmware loaded.
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: [FTL:WRN] Failure running _LoadFTLCxt!
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: [FTL:WRN] Recovering NAND Data Structures - this will take some time!
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: AppleMRVL868x Hardware Details:
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: Firmware Version: 9.108.4.p12 (0x0c096c04)
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: I/O Version: 0x0002
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: Hardware Version: 0x0012
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: Mac Address: 00:1d:4f:1f:0f:e3
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: [FTL:WRN] _FTLRestore OK!
    Mon Jun 22 21:21:40 unknown kernel[0] <Debug>: [FTL:MSG] FTL_Open [OK]
    Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: Got boot device = IOService:/AppleARMPE/arm-io@3C000000/AppleS5L8900XIO/flash-controller0@A00000/ AppleS5L8900XADMFMC/disk@FF/AppleNANDFTL/IOFlashBlockDevice/IOBlockStorageDriver /unknown vendor unknown product Media/IOFDiskPartitionScheme/Untitled 1@1
    Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: BSD root: disk0s1, major 14, minor 1
    Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: L2TP domain init
    Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: L2TP domain init complete
    Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: PPTP domain init
    Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: Jettisoning kext bootstrap segment.
    Mon Jun 22 21:21:41 unknown mDNSResponder[16] <Error>: mDNSResponder mDNSResponder-191.9 (May 13 2009 22:49:14) starting
    Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: mDNSResponder[16] syscallbuiltinprofile: mDNSResponder (seatbelt)
    Mon Jun 22 21:21:41 unknown /usr/sbin/fairplayd[19] <Notice>: Vroum\n
    Mon Jun 22 21:21:41 unknown kernel[0] <Debug>: mDNSResponder[16] Builtin profile: mDNSResponder (seatbelt)
    Mon Jun 22 21:21:42 unknown /usr/bin/IQAgent[18] <Notice>: Unsupported. Exiting.
    Mon Jun 22 21:21:42 unknown mDNSResponder[16] <Error>: Note: SetDomainSecrets: no keychain support
    Mon Jun 22 21:21:42 unknown com.apple.BTServer[28] <Notice>: BTServer 1.2 () Modified on
    Mon Jun 22 21:21:42 unknown com.apple.BTServer[28] <Notice>: com.apple.server.bluetooth: Bluetooth Super Server Robot Destroyer
    Mon Jun 22 21:21:42 unknown kernel[0] <Debug>: systemShutdown false
    Mon Jun 22 21:21:42 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 1 of 10\n
    Mon Jun 22 21:21:43 unknown com.apple.accessoryd[22] <Notice>: BTSessionAttach failed : 0x9
    Mon Jun 22 21:21:43 unknown com.apple.BTServer[28] <Notice>: com.apple.server.bluetooth: Unable to match bluetooth service in device tree.
    Mon Jun 22 21:21:43 unknown com.apple.BTServer[28] <Notice>: com.apple.server.bluetooth: Not a valid MAC address (all 00s).
    Mon Jun 22 21:21:43 unknown com.apple.BTServer[28] <Notice>: com.apple.server.bluetooth: No bluetooth on this device.
    Mon Jun 22 21:21:43 unknown lockdownd[14] <Error>: (0x39d802b8) lookupimei: Could not get matching service for baseband
    Mon Jun 22 21:21:43 unknown lockdownd[14] <Error>: (0x39d802b8) load_bluetoothaddress: Could not look up bluetooth MAC address via IOKit
    Mon Jun 22 21:21:43 unknown mDNSResponder[16] <Error>: HW_MODEL: Device (Device) Portability 99 Marginal Power 99 Total Power 99
    Mon Jun 22 21:21:43 unknown mDNSResponder[16] <Error>: D2DInitialize!!!
    Mon Jun 22 21:21:43 unknown mDNSResponder[16] <Error>: CFRunLoop member is active
    Mon Jun 22 21:21:43 unknown com.apple.mDNSResponder[16] <Notice>: Call to BTSessionAttachWithRunLoopAsync failed with error 9 - critical error
    Mon Jun 22 21:21:43 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 2 of 10\n
    Mon Jun 22 21:21:44 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 1 of 10\n
    Mon Jun 22 21:21:44 unknown configd[20] <Notice>: skipped com.apple.SystemConfiguration.PowerManagement (excluded)
    Mon Jun 22 21:21:44 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 3 of 10\n
    Mon Jun 22 21:21:45 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 2 of 10\n
    Mon Jun 22 21:21:45 unknown configd[20] <Notice>: CLTM: No thermal sensors detected, not registering for notifications
    Mon Jun 22 21:21:45 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 4 of 10\n
    Mon Jun 22 21:21:46 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 3 of 10\n
    Mon Jun 22 21:21:46 unknown lockdownd[14] <Error>: (0x39d802b8) synthesizedeviceID: Faking out the wifi address for UDID synthesis
    Mon Jun 22 21:21:46 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 5 of 10\n
    Mon Jun 22 21:21:47 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 4 of 10\n
    Mon Jun 22 21:21:47 unknown configd[20] <Error>: WiFi: Unable to attach to Mobile Bluetooth result=0x1
    Mon Jun 22 21:21:47 unknown configd[20] <Error>: Failed to connect to lockdown. Attempt 1 of 10\n
    Mon Jun 22 21:21:47 unknown /usr/libexec/CrashHousekeeping[26] <Error>: Failed to connect to lockdown. Attempt 6 of 10\n
    Mon Jun 22 21:21:48 unknown mediaserverd[15] <Error>: Failed to connect to lockdown. Attempt 5 of 10\n
    Mon Jun 22 21:21:48 unknown lockdownd[14] <Error>: (0x810a00) calculateapplicationusage: Could not lookup the previous mobile application usage
    Mon Jun 22 21:21:48 unknown profileInstallationHelper[31] <Warning>: loading file /var/mobile/Library/Carrier Bundle.bundle/profile.mobileconfig inspection: 0
    Mon Jun 22 21:21:48 unknown profileInstallationHelper[31] <Warning>: -[MCPayloadManager setupWithPayloadFile:forInspection:] 2118 : could not set up from file /var/mobile/Library/Carrier Bundle.bundle/profile.mobileconfig
    Mon Jun 22 21:21:49 unknown profileInstallationHelper[31] <Warning>: /SourceCache/ManagedConfiguration/ManagedConfiguration-302.2/MCPayloadManager.m 2119 : Error Domain=MCPayloadHandlerErrorDomain Code=1 UserInfo=0x111ca0 "Profile could not be validated" {\n Class = MCPayloadManager;\n MCErrorType = MCFatalError;\n Method = "setupWithPayloadFile:forInspection:";\n NSLocalizedDescription = "Profile could not be validated";\n NSLocalizedRecoveryOptions = (\n OK\n );\n NSLocalizedRecoverySuggestion = "Profile could not be read.";\n}
    Mon Jun 22 21:21:50 unknown kernel[0] <Debug>: AirPort: Enabled AppleMRVL868x (link 1, sys 0, user 1)
    Mon Jun 22 21:21:50 unknown kernel[0] <Debug>: AppleMRVL868x::setPOWER() [configd]: 1
    Mon Jun 22 21:21:50 unknown configd[20] <Notice>: network configuration changed.
    Mon Jun 22 21:21:50 unknown configd[20] <Notice>: setting hostname to "a"
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) load_systemversion: Could not lookup release type
    Mon Jun 22 21:21:51 unknown lockbot[35] <Error>: copy_preference: Could not lookup key SBFormattedPhoneNumber
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) lockbotcopypreference: lockbot returned an error: MissingPreferenceValue
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: looking at /var/root/Library/Lockdown/activation_records (1/0)
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: looking at /var/root/Library/Lockdown/activationrecords/podrecord.plist (8/0)
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) extract_recordidentifier: Could not extract ICCID from account token
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: Could not extract ICCID from record
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: This is the iPod activation record
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) loadactivationrecords: looking at /var/root/Library/Lockdown/activation_records (6/0)
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) determineactivationstate: The original activation state is Activated
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) determineactivationstate: SIM status: kCTSIMSupportSIMStatusReady
    Mon Jun 22 21:21:51 unknown lockdownd[14] <Error>: (0x80d000) determineactivationstate: The activation state has not changed.
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: PTP
    Mon Jun 22 21:21:52 unknown SpringBoard[23] <Warning>: -[SBTetherController _demoCardConnection] No AppleTetheredDevice instance found
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: iPod USB Interface
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: USBAudioControl
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: USBAudioStreaming
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: IapOverUsbHid
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice Interface: AppleUSBMux
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: IOAccessoryPortUSB::start
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: virtual bool AppleUSBDeviceMux::start(IOService*) build: May 13 2009 22:35:22
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: init_waste
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::gated_registerFunction all functions registered- we are ready to start usb stack
    Mon Jun 22 21:21:52 unknown SpringBoard[23] <Error>: WiFi: Consulting "no-sdio-devices" property.
    Mon Jun 22 21:21:52 unknown SpringBoard[23] <Error>: WiFi: "no-sdio-devices" property not found.
    Mon Jun 22 21:21:52 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
    Mon Jun 22 21:21:53 unknown /usr/libexec/ptpd[12] <Notice>: PTP interface bas been activated at high speed.
    Mon Jun 22 21:21:53 unknown SpringBoard[23] <Warning>: lockdown says the device is: [Activated], state is 3
    Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Warning>: received request 4: (\n RequestType\n), keys {\n RequestType = GetProfileList;\n}
    Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Warning>: processing request 4: ((\n RequestType\n))
    Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Warning>: sending reply {\n OrderedIdentifiers = (\n );\n ProfileManifest = {\n };\n ProfileMetadata = {\n };\n Status = Acknowledged;\n}
    Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Error>: receive_message: Could not receive size of message: 0 Operation not permitted
    Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Warning>: received request 4: (null), keys (null)
    Mon Jun 22 21:21:56 unknown mcmobiletunnel[46] <Error>: main: Could not receive request from host.
    Mon Jun 22 21:21:57 unknown SpringBoard[23] <Error>: WiFi: Consulting "no-sdio-devices" property.
    Mon Jun 22 21:21:57 unknown SpringBoard[23] <Error>: WiFi: "no-sdio-devices" property not found.
    Mon Jun 22 21:21:57 unknown lockbot[47] <Error>: copy_preference: Could not lookup key SBFormattedPhoneNumber
    Mon Jun 22 21:21:57 unknown lockdownd[14] <Error>: (0x39d802b8) lockbotcopypreference: lockbot returned an error: MissingPreferenceValue
    Mon Jun 22 21:21:57 unknown /System/Library/CoreServices/SpringBoard.app/SpringBoard[23] <Notice>: CLTM: initial thermal level is 0
    Mon Jun 22 21:22:00 unknown kernel[0] <Debug>: AppleMRVL868x::setASSOCIATE() [configd]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPEWPA2PSK, key = CIPHER_PMK, flags = 0x2
    Mon Jun 22 21:22:00 unknown kernel[0] <Debug>: AppleMRVL868x Joined AP: @ 0xc4f8e000, BSSID = 00:1a:2a:d3:45:8a, rssi = -41, rate = 54 (100%), channel = 9, encryption = 0xc, ap = 1, hidden = 0, directed = 0, failures = 0, age = 2, ssid[12] = "Arcor-D34512"
    Mon Jun 22 21:22:00 unknown SpringBoard[23] <Warning>: WiFi: Joined network Arcor-D34512. WiFi bars visible: 0
    Mon Jun 22 21:22:00 unknown kernel[0] <Debug>: AirPort: Link Up on en0
    Mon Jun 22 21:22:03 unknown kernel[0] <Debug>: AppleMRVL868x::setCIPHER_KEY() [kernel_task]: type = CIPHERAESCCM, index = 0, flags = 0x4
    Mon Jun 22 21:22:03 unknown kernel[0] <Debug>: AppleMRVL868x::setCIPHER_KEY() [kernel_task]: type = CIPHER_TKIP, index = 2, flags = 0x0
    Mon Jun 22 21:22:03 unknown configd[20] <Notice>: network configuration changed.
    Mon Jun 22 21:22:04 unknown configd[20] <Notice>: CaptiveNetworkSupport:CaptiveStartDetect:1813 skipping probe on IPv4.Router=192.168.2.1;IPv4.RouterHardwareAddress=00:1a:2a:d3:45:8a, protected network
    Mon Jun 22 21:22:09 unknown kernel[0] <Debug>: AppleMultitouchZ2SPI: * Killing device (#1): Too many errors performing control write *
    Mon Jun 22 21:22:09 unknown kernel[0] <Debug>: AppleMultitouchZ2SPI: kIOReturnNotResponding: 5 times
    Mon Jun 22 21:22:16 unknown kernel[0] <Debug>: AppleMultitouchZ2SPI: * Killing device (#2): Too many errors performing control write *
    Mon Jun 22 21:22:16 unknown kernel[0] <Debug>: AppleMultitouchZ2SPI: kIOReturnError: 5 times
    Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: AppleSynopsysOTGDevice::handleUSBReset
    Mon Jun 22 21:40:10 unknown /usr/libexec/notification_proxy[40] <Error>: Could not receive size of message
    Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: virtual IOReturn AppleUSBDeviceMux::message(UInt32, IOService*, void*) - kMessageInterfaceWasDeActivated
    Mon Jun 22 21:40:10 unknown /usr/libexec/ptpd[12] <Notice>: PTP interface has been deactivated.
    Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: AppleUSBDeviceMux::reportStats: USB mux statistics:
    Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: USB mux: 64 reads / 0 errors, 134 writes / 0 errors
    Mon Jun 22 21:40:10 unknown kernel[0] <Debug>: USB mux: 0 short packets, 0 dups
    Mon Jun 22 21:40:10 unknown /usr/libexec/notification_proxy[40] <Error>: Could not receive message
    Mon Jun 22 21:40:10 unknown /usr/libexec/ptpd[12] <Notice>: PTP interface bas been activated at high speed.
    Mon Jun 22 21:40:42 unknown SpringBoard[23] <Warning>: SB SYNC: iTunesSyncRequestedStart 0
    Mon Jun 22 21:40:42 unknown SpringBoard[23] <Warning>: SB SYNC: beginSyncing 1
    Mon Jun 22 21:40:42 unknown SpringBoard[23] <Warning>: SB SYNC: didShowSyncPanel 2
    Mon Jun 22 21:40:42 unknown SpringBoard[23] <Warning>: SB SYNC: _notifyAppsSyncWillBegin 2
    Mon Jun 22 21:40:53 unknown BackupAgent[64] <Warning>: Backup session starting
    Mon Jun 22 21:40:55 unknown mcmobiletunnel[72] <Warning>: received request 4: (\n RequestType\n), keys {\n RequestType = GetProfileList;\n}
    Mon Jun 22 21:40:55 unknown mcmobiletunnel[72] <Warning>: processing request 4: ((\n RequestType\n))
    Mon Jun 22 21:40:56 unknown mcmobiletunnel[72] <Warning>: sending reply {\n OrderedIdentifiers = (\n );\n ProfileManifest = {\n };\n ProfileMetadata = {\n };\n Status = Acknowledged;\n}
    Mon Jun 22 21:40:56 unknown mcmobiletunnel[72] <Error>: receive_message: Could not receive size of message: 0 Operation not permitted
    Mon Jun 22 21:40:56 unknown mcmobiletunnel[72] <Warning>: received request 4: (null), keys (null)
    Mon Jun 22 21:40:56 unknown mcmobiletunnel[72] <Error>: main: Could not receive request from host.
    Mon Jun 22 21:40:56 unknown SpringBoard[23] <Warning>: SB SYNC: iTunesSyncHasCompleted 2
    Mon Jun 22 21:40:56 unknown SpringBoard[23] <Warning>: SB SYNC: didEndSyncing 5
    Mon Jun 22 21:40:56 unknown SpringBoard[23] <Warning>: ITDBPrepServerPostProcessRun: [BEGIN] looking up itdbprepserver.
    Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: starting up.
    Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: acquired iTunes sync file lock.
    Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: acquired itdbprep file lock.
    Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: posting com.apple.itdbprep.notification.willBegin
    Mon Jun 22 21:40:57 unknown SpringBoard[23] <Warning>: ITDBPrepServerPostProcessRun: [-END-] looking up itdbprepserver. success = 1
    Mon Jun 22 21:40:57 unknown itdbprepserver[75] <Warning>: BEGIN processing command: com.apple.itdprep.command.runPostProcess
    Mon Jun 22 21:40:58 unknown itdbprepserver[75] <Warning>: [BEGIN] Post Processing...
    Mon Jun 22 21:40:58 unknown itdbprepserver[75] <Warning>: Skipping iTunes Commands.
    Mon Jun 22 21:40:58 unknown itdbprepserver[75] <Warning>: Running Misc Commands...
    Mon Jun 22 21:40:58 unknown itdbprepserver[75] <Warning>: Running Sorting Process...
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: received request 4: (\n RequestType,\n IPCUIdentifier\n), keys {\n IPCUIdentifier = "iPCUHost-0C04DA13-AF9B-4EE6-A3F2-29FB774CB4CD";\n RequestType = GetEncryptionKey;\n}
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: processing request 4: ((\n RequestType,\n IPCUIdentifier\n))
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: returning persistent reference table {\n "iPCUHost-0C04DA13-AF9B-4EE6-A3F2-29FB774CB4CD" = <69646e74 00000000 00000003>;\n "iPCUHost-0C04DA13-AF9B-4EE6-A3F2-29FB774CB4CD-HostCert" = <63657274 00000000 00000002>;\n}
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: Got persistent ref <69646e74 00000000 00000003> for label iPCUHost-0C04DA13-AF9B-4EE6-A3F2-29FB774CB4CD
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: keychain lookup returned error 0
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: got identity/cert <NSCFType: 0x1075a0>
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: got certificate 1075a0
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: sending reply {\n PublicKey = <308202a9 30820191 a0030201 02020102 300b0609 2a864886 f70d0101 05304531 36303406 03550403 0c2d6950 4355486f 73742d30 43303444 4131332d 41463942 2d344545 362d4133 46322d32 39464237 37344342 34434431 0b300906 03550406 13024445 301e170d 30393036 32323138 33343130 5a170d31 30303632 32313833 3431305a 30453136 30340603 5504030c 2d695043 55486f73 742d3043 30344441 31332d41 4639422d 34454536 2d413346 322d3239 46423737 34434234 4344310b 30090603 55040613 02444530 819f300d 06092a86 4886f70d 01010105 0003818d 00308189 02818100 93de5ae1 ae02f4de a05bd272 89a395c0 baa91919 eef5ed42 44cd27db 956aaa06 a2654847 5d2440e3 147664be b4826c88 bfce82f7 4c6b7113 1f60077b a622c32d 4222529c 7b7b42f6 c54d61b4 926ceb12 44ce630b e9a946db fd4aebab 2fc850b1 7acd9e8e 545a5aee 6c850a7f 4f9ed65f 735d6bb9 f883c1fb 878f38c7 3575ad1f 02030100 01a32a30 28300e06 03551d0f 0101ff04 04030205 a0301606 03551d25 0101ff04 0c300a06 082b0601 05050703 04300d06 092a8648 86f70d01 01050500 03820101 00f04d60 d47cc9af 65409ac3 1e828445 55495579 132ec75e 5961a95f acc55b89 65e7dce4 d6d1461f 3454d60b a5e78559 aa157ea7 88a705f5 bcf8ffe2 94156084 ba9f7682 422a6c81 b675c9eb 4fa54ef1 549c97f2 41c93b28 e8f6d60d ea4aadda 0414345a de790a41 ce83c38b 61b3e845 08817544 ccbd75ef bbc3942d 6378710b a78dd371 52031bf7 340685c2 f3bfcaaa 51f69bce 97f20b93 05364a0b fd5e0f45 0ee340c4 b5f217c6 c5be43f6 1d041fb2 76013985 6ad1de11 3d226ac4 4a21340f a6a22aaf b1878a9a e205d915 c0cc10ff 111e0372 7abd91c6 e51126fc c8204cf3 87f1e871 832b7ee8 c786a4d5 1bd81ee5 80acc5cf 11840dad 95f38d04 7d690cde 56>;\n Status = Acknowledged;\n}
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Error>: receive_message: Could not receive size of message: 0 No such file or directory
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Warning>: received request 4: (null), keys (null)
    Mon Jun 22 21:41:01 unknown mcmobiletunnel[79] <Error>: main: Could not receive request from host.
    Mon Jun 22 21:41:07 unknown itdbprepserver[75] <Warning>: Running Create Triggers...
    Mon Jun 22 21:41:07 unknown itdbprepserver[75] <Warning>: [-END-] Post Processing.\n\nStats\n\ttotalTime=9.26s\n\tcommands=0.02\n\tmisc=0.08s\n\ticuSo rt=9.16s (MLSicudata=0.56s, MLSicu_secdata=0.26, dropIdx=1.21, normalize=0.15, update_orders=4.53, tStatsICUOther1=0.01, createIndex=2.43)\n\n
    Mon Jun 22 21:41:07 unknown itdbprepserver[75] <Warning>: * STARTING: DB Backup (CREATE-NEW) *
    Mon Jun 22 21:41:08 unknown itdbprepserver[75] <Warning>: * FINISHED: DB Backup (CREATE-NEW, time = 0.86s) *
    Mon Jun 22 21:41:08 unknown itdbprepserver[75] <Warning>: Initializing MusicLibrary
    Mon Jun 22 21:41:10 unknown itdbprepserver[75] <Warning>: DONE processing command: com.apple.itdprep.command.runPostProcess
    Mon Jun 22 21:41:10 unknown itdbprepserver[75] <Warning>: posting com.apple.itdbprep.notification.didEnd
    Mon Jun 22 21:41:10 unknown itdbprepserver[75] <Warning>: Releasing locks.
    Mon Jun 22 21:41:10 unknown itdbprepserver[75] <Warning>: exiting now.
    Message was edited by: Eimer

    Has someone an idea how to get into the system of the iPod, that i am able to see what he is doing?
    I already tried to works with XCode, but not able to connect to my device.
    Also worked with the iPhone Utility, nevertheless a bit helpful.
    Or a hint, how to destroy my actual firmware and to set up a new one, means setting up a completely (brand) new iPod like i bought it at the store?!
    Support can not help me any more because my warranty is over ince 2 days.
    Thank you

Maybe you are looking for

  • File at a location

    Hi all, Can I copy a file from one folder to other folder and delete this file from the first folder using abap? For example there is a folder at C:\Etc\Test and I want to copy this file to folder xyz as: C:\XYZ\Test How can I do that and delete the

  • Unable to update table

    I'm trying to set the last column in my database equal to 'Deleted' for a particular record. The following code does not update the record, but it also does not produce an error. The column name is 'Status'. else if(action != null && action.equals("d

  • How do I transfer my data from my nokia 5800 to my...

    My phone keeps switching itself off and needs to be sent off for repair only I dont know how to download all photos and numbers to my mac.

  • $1 Charged for Free Trail

    Dear Azure users, I'm trying to register for Azure Free Trail. I was asked for credit card info and it mentioned as its for identification purpose only. But, still I was charged by 1 USD. Its something weird service from Microsoft. They should have m

  • Frontrow and AVI files crashing

    Hi all, I am trying to play Avi files through Frontrow however FR just keeps crashing when it accesses the avi file. I can play all of the avi files through QT (Version 7) after downloading DivX and AC3 codec's. I assumed that as it is playing fine i