Connecting external 56k modem to ISP

Hello,
I'm new with Solaris 10 and x86. I have a Sportster MessagePlus Pro V90 PnP
3com u.s. robotics (56k Professional Message Modem) attached to Com1 port. I'd want to connect this analogic modem to ISP for navigate.I read the guide System Administration Guide:
Network Services. I think I should make a dial-out connection, but I'm still confused. It seems that there are some different ways. Which method I have to adopt (ppp4.0, uucp etc...)?
If you have a procedure to follow I thank you.

Similar Messages

When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

When I open firefox before connecting (via 56k modem) or if I leave a previous section open, disconnect and then reconnect, firfox does not work, it remains offline, even though internet is connected. I have to close firefox and reopen

Thanks for the reply. I never get the option to "Restore Previous History" from History. I don't even have the box checked that asks to delete the history when Firefox closes. I don't know what's wrong, no matter what, I always lose everything. I have the box marked "Show my windows and tabs from last time" for when I open Firefox, but it never shows that, just my homepage. Also, when I check my History, it only shows the pages that I opened since I started Firefox, nothing from before. Even if I were to open up 10 pages now, close Firefox, and open it, the history would only show the homepage that opened this time, not any of the 10 pages that I opened 5 minutes ago.

Internet connect for 56k modem

Have no access except by 56k modem.
Where can I find the download for this application? Please
Robert

Am a bit confused - could you clarify please:
You can connect to the internet via 56k dialup?
That is the only way for you to connect?
Exactly which application do you wish to download?
If the first two assumptions correct, you are paying your ISP for internet access via phone dialup. If you want to connect via other means such as DSL or cable, you need to find an ISP who offers those services in your area.
Once you clarify and give us more facts, we can figure out if I misunderstood your question.

Unable to connect wireless print server while using wireless modem to ISP

Unable to connect an HP Laserjet 1320 thru the JetDirect ew2400 External Print Server to an imac G5 that uses the 2WIRE352 modem for ISP access thru ATT. Either the ISP is connected and works, or the printer works but no internet access. HP (after 1hr 15 min.) said I need to change/access the "infrastructure" in the OSX. Is that correct? & if so, how do I do this? Do I need to hire Apple Tech Support to do this? How much will that cost. I'm ready to send the Print Server back to HP for a refund.

I would post your issue in the Printing & Faxing forum area. More chance for some of the gurus like Greg Sahli to respond.

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I am trying to use an external 3g modem made by Huawei model e173s-6 and when I do connect it on my usb port the macbook pro just do not recognize it. I own a 2012 model with mountain lion 10.8.2 . What should I do ?

I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images! Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

How to Bridge Actiontec GT704WGB modem/router combo so that I can connect external wireless router?

I am having a hard time to bridge the actiontec GT704WGB
On verizon site there are instructions but they are only for GT704WG without the B. B I beleive is a more latest modem/router combo.
Can anyone please help me guiding on how to setup the actiontech GT704WGB to Bridge mode so that i can connect external router to it?
I would really appreciate a prompt response.
Thanks
Alish

http://www22.verizon.com/ResidentialHelp/HighSpeed/Networking/SetUp/Actiontec704WG/123754.htm
Try this link for details.

56K Modem Problem (connection)

if i plugin the Airport Base Stations 56K modem into the Telephon, the telephon won´t work no more! I bought the Base Station for an Friend at eBay. There was no Modem Cable with it, so i grabed the old Cable from my G4.
Powermac G4 Mac OS X (10.4.7)

I seem to recall reading that the original eMac, which were meant strictly for educational use in classrooms and such, didn't have a modem installed. Maybe you have an education model without the modem card?
Patrick

Lync 2011 for MAC not connecting externally to On-Premise Lync 2013

Hello,
Hopefully someone has some idea on this or a better direction for me to follow. So currently I have an issue where Lync 2011 for MAC clients will not connect when external to my On-Premise Lync 2013 servers. Everything to do with my Windows based clients
and even cell phone based client’s works just fine. It is currently only Lync 2011 for MAC which will not correct externally.
I did initially have the logon problem internally as noted by other posts online when using an internal CA certificate with Lync. But with the internal certificate imported onto the MAC when internally connected Lync 2011 will login just fine. Now in my
setup I do have a TMG server that clients are connecting to that forwards the connections onto my Lync servers when connecting externally. When I review live real time logs to see what’s connecting to the external URL for Windows based clients I can see them
connect in on port 443 no problem.
But with the MAC I don’t see any attempt from it to connect to the URL like I see with the Windows clients. Now below is what shows up in the Microsoft-Lync.log generated by the MAC. Now initially looking at the log I thought my problem was the fact when
Lync 2011 tires to connect when external that it was doing so on port 5061 which we don’t have open. So I tired entering external.mydomain.com:443 in for my external server in the setup.
And while rechecking the log after doing so shows like it is now trying to connect on port 443. When reviewing TMG I again see no connection attempt by the MAC to connect to the Lync external url or on port 443. Further research so far into the problem has
come up empty on the subject. And most other cases where people report problems connecting externally they are using some form of online service like Office 365. So at this point I am not even sure if Lync 2011 for MAC is supposed to work externally with On-Premise
Lync 2013 deployments or not. If anyone has an thought’s or idea’s please share them as at this point I am stuck on this issue.
Microsoft Lync 14.0.10 (141024)
MacOS version 10.7.5 (build 11G63)
2015/01/08 08:51:11.807 SIPService::OnEvent(IApplicationLayerEvent &), type: 0, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:12.670 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 0, newState: 10, direction: 0
2015/01/08 08:51:12.682 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:12.685 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.192 Office Communications Server LOGON STARTED: USER = {nsayewich}
2015/01/08 08:51:20.197 SIPService::Logon
2015/01/08 08:51:20.281 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.543 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.543 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.566 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.566 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.568 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.568 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.600 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 10, newState: 20, direction: 0
2015/01/08 08:51:21.535 InternalConnect, NLResolveAddress returned: -3176
2015/01/08 08:51:21.537 IsLocalAddress, 'internal.mydomain.com' is not a local address
2015/01/08 08:51:21.537 FShouldUseProxy, is returning 1
2015/01/08 08:51:21.537 Connecting to internal.mydomain.com (port 0)
2015/01/08 08:51:21.537 InternalConnect, NLCreateConnection returned: -3176,
2015/01/08 08:51:21.537 FUsingHttpsTunnelProxies, returning: 0
2015/01/08 08:51:21.537 Listening thread got exception -3176
2015/01/08 08:51:23.632 InternalConnect, NLResolveAddress returned: 0
2015/01/08 08:51:23.633 IsLocalAddress, 'external.mydomain.com' is not a local address
2015/01/08 08:51:23.633 FShouldUseProxy, is returning 1
2015/01/08 08:51:23.633 Connecting to external.mydomain.com (port 5061)
2015/01/08 08:51:38.004 InternalConnect, NLCreateConnection returned: -3259,
2015/01/08 08:51:38.004 FUsingHttpsTunnelProxies, returning: 0
2015/01/08 08:51:38.004 Listening thread got exception -3259
2015/01/08 08:51:38.005 InternalConnect, NLResolveAddress returned: 0
2015/01/08 08:51:38.006 IsLocalAddress, 'external.mydomain.com' is not a local address
2015/01/08 08:51:38.006 FShouldUseProxy, is returning 1
2015/01/08 08:51:38.006 Connecting to external.mydomain.com (port 5061)
2015/01/08 08:51:53.008 InternalConnect, NLCreateConnection returned: -3259,
2015/01/08 08:51:53.008 FUsingHttpsTunnelProxies, returning: 0
2015/01/08 08:51:53.008 Listening thread got exception -3259
2015/01/08 08:51:55.026 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x80072743, oldState: 20, newState: 10, direction: 1
2015/01/08 08:51:55.026 Login (1) failed with error: (0.-2147014845)
2015/01/08 08:51:55.036 SIPService::OnEvent(IApplicationLayerEvent &), type: 8, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.036 SIPService::OnEvent(IApplicationLayerEvent &), type: 2, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.036 SIPService::OnEvent(IApplicationLayerEvent &), type: 4, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.037 SIPService::OnEvent(IApplicationLayerEvent &), type: 6, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.037 SIPService::OnEvent(IApplicationLayerEvent &), type: 4, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.038 SIPService::OnEvent(IApplicationLayerEvent &), type: 6, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.038 SIPService::OnEvent(IApplicationLayerEvent &), type: 4, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.040 SIPService::OnEvent(IApplicationLayerEvent &), type: 6, HasSignedIn(): 0, HasSignedOut: 0

Hi Nicholas Sayewich,
I tested in my lab and without any problem.
I also use TMG as Reverse Proxy and without configuring SRV records (My ISP don’t support SRV), after importing the root certificate onto MacBook, I can sign into Lync everywhere(internal
and external).
Please make sure that the certificate is set up to
Always Trust .
http://blogs.technet.com/b/nexthop/archive/2008/03/05/how-to-install-a-trusted-root-ca-certificate-on-osx-leopard-for-use-with-messenger-for-macintosh.aspx
And my log for your reference:
Microsoft Lync 14.0.10 (141024)
MacOS version 10.10.1 (build 14B25)
2015/01/09 22:40:15.802 SIPService::OnEvent(IApplicationLayerEvent &), type: 0, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:16.486 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 0, newState: 10, direction: 0
2015/01/09 22:40:16.493 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:16.496 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.595 Office Communications Server LOGON STARTED: USER = {MyDomain\LyncUser1}
2015/01/09 22:40:32.596 SIPService::Logon
2015/01/09 22:40:32.633 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.737 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.738 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.743 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.743 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.744 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.744 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.754 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 10, newState: 20, direction: 0
2015/01/09 22:40:33.080 InternalConnect, NLResolveAddress returned: 0
2015/01/09 22:40:33.082 IsLocalAddress, 'sipinternal.MyDomain.com' is not a local address
2015/01/09 22:40:33.082 FShouldUseProxy, is returning 1
2015/01/09 22:40:33.082 Connecting to sipinternal.MyDomain.com (port 5061)
2015/01/09 22:40:48.008 InternalConnect, NLCreateConnection returned: -3259,
2015/01/09 22:40:48.008 FUsingHttpsTunnelProxies, returning: 0
2015/01/09 22:40:48.010 Listening thread got exception -3259
2015/01/09 22:40:50.043 InternalConnect, NLResolveAddress returned: 0
2015/01/09 22:40:50.044 IsLocalAddress, 'sip.MyDomain.com' is not a local address
2015/01/09 22:40:50.044 FShouldUseProxy, is returning 1
2015/01/09 22:40:50.044 Connecting to sip.MyDomain.com (port 443)
2015/01/09 22:40:50.896 InternalConnect, NLCreateConnection returned: 0,
2015/01/09 22:40:50.896 InternalConnect, NLCopyConnectionBinding returned: 0,
2015/01/09 22:40:52.980 InternalConnect, NLResolveAddress returned: 0
2015/01/09 22:40:52.981 IsLocalAddress, 'sip.MyDomain.com' is not a local address
2015/01/09 22:40:52.981 FShouldUseProxy, is returning 1
2015/01/09 22:40:52.981 Connecting to sip.MyDomain.com (port 5061)
2015/01/09 22:40:53.291 InternalConnect, NLCreateConnection returned: 0,
2015/01/09 22:40:53.291 InternalConnect, NLCopyConnectionBinding returned: 0,
2015/01/09 22:40:53.522 HRESULT GetLinkSpeed(DWORD, DWORD*, WIN_BOOL*): ip 192.168.100.187, link speed 0
2015/01/09 22:40:53.522 HRESULT GetLinkSpeed(DWORD, DWORD*, WIN_BOOL*): Working around 0 link speed
2015/01/09 22:40:53.526 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 20, newState: 30, direction: 0
2015/01/09 22:40:53.528 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.529 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.555 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.555 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.583 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.584 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.592 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.592 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.615 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.615 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.622 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.622 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.784 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.784 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.786 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 1, HasSignedOut: 0
2015/01/09 22:40:53.787 virtual void SIPService::OnIdleHandleLogonSucceeded()
2015/01/09 22:40:53.792 Office Communications Server LOGON ENDED: USER = { MyDomain\LyncUser1}
2015/01/09 22:40:54.151 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:54.151 FShouldUseProxy, is returning 1
2015/01/09 22:40:54.379 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:54.379 FShouldUseProxy, is returning 1
2015/01/09 22:40:55.082 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:55.082 FShouldUseProxy, is returning 1
2015/01/09 22:40:55.440 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:55.440 FShouldUseProxy, is returning 1
2015/01/09 22:40:55.683 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:55.683 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.238 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.238 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.239 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.239 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.241 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.241 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.241 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.241 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.241 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.241 FShouldUseProxy, is returning 1
Best regards,
Eric

Cisco 877W router and external ADSL modem

Cisco 877W router and external ADSL modem
In order to support ADSL2+ on a pre ADSL2+ router and in preparation for a later migration to BT infinity I am trying to configure the Router using an external adsl2+ modem appropriately.
The original configuration had 3 ports configured as one (internal lan) vlan and bridge group together with one wireless sub-interface, the remaining port configured a second vlan and bridge group with a second wireless sub- interface. The Dialer was a member of the second bridge group. This way the second wireless interface and associated bridge group provided a kind of DMZ for outbound access.
The configuration I am attempting is similar the lan ports remain the same, but port 0 as a member of the vlan and bridge group (now a pppoe client) associated with one of the wireless sub interfaces as per above. The ATM interface is downed. This nearly works except that if the wireless subinterface on this bridge group is configured the dialer no longer dials giving a 'no dialer string' error. If I do not configure that wireless sub interface all works well.
If anyone is interested to look I would appreciate any comments. I enclose a sanitised config in which you will note the 'commented out' wireless subnet interface (in red).
version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname xxxxxxxxxxxxxxxxxxxxx
boot-start-marker
boot-end-marker
logging buffered 4096 warnings
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxxxx
aaa new-model
aaa group server radius sdm-vpn-server-group-2
aaa group server radius rad_eap
server 192.168.253.1 auth-port 1812 acct-port 1813
server 192.168.253.1 auth-port 1645 acct-port 1646
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login sdm_vpn_xauth_ml_2 group sdm-vpn-server-group-2
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa authorization ipmobile default group rad_pmip
aaa authorization network sdm_vpn_group_ml_2 local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
clock timezone PCTime 0
clock summer-time PCTime date Mar 30 2003 1:00 Oct 26 2003 2:00
crypto pki trustpoint TP-self-signed-2834265337
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2834265337
revocation-check none
rsakeypair TP-self-signed-2834265337
crypto pki certificate chain TP-self-signed-2834265337
certificate self-signed 01 nvram:IOS-Self-Sig#2F.cer
dot11 syslog
dot11 ssid GuestAP
   vlan 101
   authentication open
   authentication key-management wpa
   mbssid guest-mode
   wpa-psk ascii 7 113B162712001F4A2D2B25
dot11 ssid LanAP
   vlan 100
   authentication open eap eap_methods
   authentication network-eap eap_methods
   authentication key-management wpa
   mbssid guest-mode
no ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 192.168.252.1 192.168.252.8
ip dhcp excluded-address 192.168.252.15 192.168.252.254
ip dhcp pool sdm-pool1
   import all
   network 192.168.252.0 255.255.255.0
   domain-name XXX.Local
   dns-server xxx.xxx.xxx.xxx
   default-router 192.168.252.254
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
no ip domain lookup
ip domain name XXX.Local
ip name-server xxx.xxx.xxx.xxx
ip name-server xxx.xxx.xxx.xxx
ip reflexive-list timeout 120
vpdn enable
vpdn-group 1
request-dialin
protocol pppoe
username administrator privilege 15 secret 5 £££££££££££££££££££££
class-map type inspect match-any IN_to_OUT_CLASS
match protocol tcp
match protocol udp
match protocol icmp
class-map type inspect match-any OUT_to_IN_CLASS
match protocol https
match protocol smtp extended
class-map type inspect match-any DMZ_to_IN_CLASS
match protocol http
match protocol https
match protocol smtp extended
policy-map type inspect DMZ_to_IN_POL
class type inspect DMZ_to_IN_CLASS
inspect
class class-default
drop log
policy-map type inspect IN_to_OUT_POL
class type inspect IN_to_OUT_CLASS
inspect
class class-default
drop log
policy-map type inspect OUT_to_IN_POL
class type inspect OUT_to_IN_CLASS
inspect
class class-default
drop log
zone security INSIDE
zone security OUTSIDE
zone security DMZ
zone-pair security OUT_TO_IN source OUTSIDE destination INSIDE
service-policy type inspect OUT_to_IN_POL
zone-pair security IN_TO_OUT source INSIDE destination OUTSIDE
service-policy type inspect IN_to_OUT_POL
zone-pair security DMZ_TO_OUT source DMZ destination OUTSIDE
service-policy type inspect IN_to_OUT_POL
zone-pair security DMZ_TO_IN source DMZ destination INSIDE
service-policy type inspect DMZ_to_IN_POL
bridge irb
interface Loopback0
no ip address
interface Null0
no ip unreachables
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
dsl operating-mode auto
interface FastEthernet0
description Outside Interface (PPPoE)
interface FastEthernet1
description Inside Interface
switchport access vlan 10
interface FastEthernet2
description Inside Interface
switchport access vlan 10
spanning-tree portfast
interface FastEthernet3
description Inside Interface
switchport access vlan 10
spanning-tree portfast
interface Dot11Radio0
no ip address
no ip route-cache cef
no ip route-cache
encryption vlan 100 mode ciphers aes-ccm tkip
encryption vlan 101 mode ciphers aes-ccm tkip
ssid GuestAP
ssid LanAP
mbssid
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
channel 2437
station-role root
interface Dot11Radio0.100
description LanAP
encapsulation dot1Q 100
no ip route-cache
no cdp enable
bridge-group 10
bridge-group 10 subscriber-loop-control
bridge-group 10 spanning-disabled
bridge-group 10 block-unknown-source
no bridge-group 10 source-learning
no bridge-group 10 unicast-flooding
!interface Dot11Radio0.101
! description GuestAP
! encapsulation dot1Q 101
! no ip route-cache
! no cdp enable
! bridge-group 1
! bridge-group 1 subscriber-loop-control
! bridge-group 1 spanning-disabled
! bridge-group 1 block-unknown-source
! no bridge-group 1 source-learning
! no bridge-group 1 unicast-flooding
interface Vlan1
description $ES_LAN$
no ip address
ip virtual-reassembly
pppoe enable group global
pppoe-client dial-pool-number 1
bridge-group 1
interface Vlan10
no ip address
ip virtual-reassembly
bridge-group 10
interface Dialer1
description $FW_OUTSIDE$
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip nat outside
ip virtual-reassembly
zone-member security OUTSIDE
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname XXXXXXX
ppp chap password 7 xxxxxxxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxxxxxxxxxx password 7 xxxxxxxxxxxxxxxxxxxxx
ppp ipcp dns request
ppp ipcp wins request
hold-queue 224 in
interface Dialer0
no ip address
interface BVI10
description Inside Interface
ip address 192.168.253.254 255.255.255.0
ip access-group 101 in
ip helper-address 192.168.253.1
ip nat inside
ip virtual-reassembly
zone-member security INSIDE
interface BVI1
description DMZ Interface
ip address 192.168.252.254 255.255.255.0
ip nat inside
ip virtual-reassembly
zone-member security DMZ
ip local pool SDM_POOL_1 192.168.20.9 192.168.20.14
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
ip nat inside source list Inside_Clients_NAT interface Dialer1 overload
ip nat inside source static 192.168.253.10 xxx.xxx.xxx.xxx
ip access-list extended DMZ_to_IN_POL
remark SDM_ACL Category=128
permit ip any any
ip access-list extended Inside_Clients_NAT
remark SDM_ACL Category=2
permit ip 192.168.253.0 0.0.0.255 any
logging 192.168.253.10
access-list 1 remark Auto generated by SDM Management Access feature
access-list 1 remark SDM_ACL Category=1
access-list 1 permit 192.168.253.0 0.0.0.255
access-list 100 remark VTY Access-class list
access-list 100 remark SDM_ACL Category=1
access-list 100 permit ip 192.168.253.0 0.0.0.255 any
access-list 100 deny   ip any any
access-list 101 remark Auto generated by SDM Management Access feature
access-list 101 remark SDM_ACL Category=1
access-list 101 remark Auto generated by SDM for NTP (123) xxx.xxx.xxx.xxx
access-list 101 permit udp host xxx.xxx.xxx.xxx eq ntp host 192.168.253.254 eq ntp
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq telnet
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq 22
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq www
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq 443
access-list 101 permit tcp 192.168.253.0 0.0.0.255 host 192.168.253.254 eq cmd
access-list 101 deny   tcp any host 192.168.253.254 eq telnet
access-list 101 deny   tcp any host 192.168.253.254 eq 22
access-list 101 deny   tcp any host 192.168.253.254 eq www
access-list 101 deny   tcp any host 192.168.253.254 eq 443
access-list 101 deny   tcp any host 192.168.253.254 eq cmd
access-list 101 deny   udp any host 192.168.253.254 eq snmp
access-list 101 permit ip any any
access-list 199 permit ip any host 10.1.1.1
dialer-list 1 protocol ip permit
no cdp run
radius-server attribute 32 include-in-access-req format %h
radius-server host 192.168.253.1 auth-port 1812 acct-port 1813 key 7 XXXXXXXXXXXXXXXXXX
radius-server host 192.168.253.1 auth-port 1645 acct-port 1646 key 7 XXXXXXXXXXXXXXXXXX
radius-server vsa send accounting
control-plane
bridge 1 protocol ieee
bridge 1 route ip
bridge 10 protocol ieee
bridge 10 route ip
banner login C Border Router
line con 0
no modem enable
transport output telnet
line aux 0
transport output telnet
line vty 0 4
access-class 100 in
privilege level 15
length 0
transport input telnet ssh
scheduler max-task-time 5000
scheduler interval 500
ntp server xxx.xxx.xxx.xxx source Dialer0 prefer
ntp server xxx.xxx.xxx.xxx source Dialer0 prefer
sntp server xxx.xxx.xxx.xxx
end

Hi Jody,
Apologies delay in replying. I have done the following:
Made two of the FE ports vlan1,BVI1 (for LAN traffic)
Left one port as VLAN10 as the pppoe client conected to the externalmodem
Made the last port VLAN10 as well and gave it an IP addess as for a DMZ client.
I have DHCP configured to serve the DMZ addresses.
This all works for LAN clients and also works for a client attachedto that physical DMZ port.
When I added a dot11radio sub interface into VLAN 10 the wireless client did not get an IP lease. Everything else continued to work.
I had never thought about this before, but if a dot11radio interface is on the same vlan (but not being part ofa bridge group) why are DHCP broadcasts not propogating to all the vlan members as I would have expected. I recognise that this isa limit in my understanding.
If I then made VLAN10 a member of a new Bridge Group, I lost WAN connectivity as per original posting.
I cannot add another VLAN due to the 2 vlan limit in this image.
Finally regarding your comment about giving it what it wants, what exactly did you have in mind. The dialer already has a dial string parameters configured.
Think I am about to give upon this.
Regards,

Win XP Pro + Airport Extreme + 56k Modem

Hi,
I just recently bought an Airport Extreme Base Station with the 56k modem with the intents of connecting my 12" G4 PowerBook and 12" G4 iBook (both 2005) to the internet via the 56k modem. For the record, both connect perfectly, always, no hassle. (Albeit a bit slow at 48000, and it takes 60 seconds to logon and 60 to logoff)
The catch here, is I have an IBM T42 ThinkPad (2005) that can see this Airport too. But I have not been able to find a way to turn the modem on and/or off using the IBM. I do know about the Jon Sevy java bit, I do have it downloaded -- BUT -- how does one go about installing this thing? It's a .JAR file.
I also saw a better 'dialer' here by a person posting as 'KewlDawg'(?) that also may have worked, but the link is dead.
I did manage to find a dialer called 'InModem 0.1.0' by Jason Barry Morley, but it often doesn't want to hang-up after a session.
So as you can see, I have trying to resolve this myself, but not very successfully. Anyone have a better solution for the WinXP world?
I'm so upset Apple didn't see fit to provide this themselves. What an undersight. I wanted to buy one of these for my Brother as he is a Windows only person and heavily uses dialup. Oh well, no sale there.
I look forward to all and any suggestions. Thanx in advance!

Bottom line? No! The standard for Gigabit Ethernet was set to work with CAT-5 cabling. CAT-5e, especially at the length you plan on using, will show no improvement. CAT-6 is designed for 10 GBps networking.

Cant "see" external ADSL modem [D-link model DSL-500B]

Hi guys!
Im here in poor Brazil, and I just bought a new DSL-500B external ADSL modem, and I can make this machine turn to router, to stop login every time I turn on the computer.
The manual says that the IP is 192.168.254.254, but Firefox and Safari cant "see"... I ping, and cant find... I tracerout to a google site and the modem dont appear, its invisible!
Im properly conected on web... But I have this little problem...
I dont know what to do...
Please good people, help me!
Thanks,
Daniel
Brazil
iMac Mac OS X (10.3.9)

Nothing, mate...
Firefox can't establish a connection to the server at 192.168.1.1.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Need better external dialup modem

I have a software called Meditech by Cambridge Computer Corporation that allows me to connect to my hospital computer system via a dialup modem. The Mac version of this software does not appear to work with the newer Mac modems, either the one built into my G5 iMac or the Apple external USB modem I bought for my new Macbook. When the software dials in, I get the tradition modem sound but then it hangs on the whirlybird type sound and nothing happens. Does anyone have a suggestion as to a different external modem that might work? I also have installed Parallels and tried to connect on the Windows side with the Windows version of this software but have been unable to make that happen either.

I have tried connecting at home via an Apple External Modem with my new Macbook, with the same whirlybird sound. So neither the built-in internal modem on my G5 iMac and the external Apple USB modem with my new Macbook are able to connect this software. I have a G3 iBook at home which is able to connect this software without any difficulty. That is why I figured the newer Apple modems may be different and problematic. I tried installing the Windows version of this Meditech software on the Windows side of my Parallels desktop, but cannot get the Apple external modem to show up. I bought an inexpensive Trendnet external USB modem and that didn't work either. I seem to recall that I spoke with Cambridge about this and they thought it might be a problem with the newer Apple modem. They are not highly motivated to fix the Mac side of this issue.
ds

Problem connecting to DSL modem

Just finished a long session with QWest that ended with me unable to connect to my new DSL modem. Apparently there's a problem with the IP configuration settings because everything works but the computer can't find/recognize/connect with the modem. The address, subnet, router, DNS numbers QWest provided don't work. They said I had to call Apple and verify the IP configuration. But Apple doesn't answer on weekends. Is there a way to resolve this now, or do I have to wait until Monday?

yumbeerium...
Got the right cable?
This is assuming that you are connecting it via - Ethernet port, you may need a Crossover cable if the modem did not come with one.
By the way... I wonder just how Apple can help you with settings that are to be provided by the ISP? Although I believe most ISPs can use DHCP settings, you may need to ask QWest if manual settings are really necessary.
http://docs.info.apple.com/article.html?artnum=42717
...Ron

Connection dropping WRT54G on two ISP shaw cable and Telus Adsl

Hi, hope someone could help me fix this problem i have been having for over 5 months now.
Randomly my internet connection on both my wireless and wired computers will drop and i cannot access the internet OR the router setup page (192.etc...) unless i power cycle the modem. when this happens my wired computer reports that it is still connected to my network but the speed has dropped to 1mbps. when directly connected to the modem i have no problems
my router is a wrt54G v8 (just updated the firmware) currently i am using telus as my ISP
I have spent HOURS on the phone with linksys support staff. i have done everything including:
changing the standard IP adress
playing with the MTU size and reducing it to as low as 1200
adjusting the fragmentation threshold\
adjusting the RTS threshould
changing the connection type from automatic (DHCP) to a PPPoE but when trying to connect on the status page the router replies "could not get an IP adress from ISP" even after a full powercycle
the only thing i have tried cloning the mac adress but when i do this Telus's sign up page (enter username and password) appears which leads me to their setup page IE no internet connection. however i could be doing this wrong.
I have read that putting a hub between the router and the modem works
Please does anyone have suggestions or fixes??!!?? linksys is going to replace my router but i would like to try and fix it first.
Message Edited by Skippy423 on 09-02-2007 11:10 PM

hi...you should try putting a hub in between the modem and the router .. it helps sometimes....

56k modem ribbon torn + handles are broken

Alright,
I purchased a computer from so no good online. He sent me the old G3 Blue and White, with it it has a 56k modem on the motherboard. The cable connecting it to the motherboard was torn. How do i replace the ribbon, maybe without the entire new modem? Secondly, When the joker sent me the computer, it was dropped, meaning the handles were broken. Is there a cheap way to get new handles for it. There may not be any way to get this to work, but I figured someone out there would know something.
Thanks
Rowdie Man

Hi, Rowdie Man -
One place to look is (of course) eBay.
You can also get repacement parts at places like WeLovemacs -
B&W G3 handle set - http://www.welovemacs.com/g4riserssetfr.html
Modem - http://store.yahoo.com/lovemacs/applemodems1.html

Connecting external 56k modem to ISP

Similar Messages

Maybe you are looking for