Connecting external audio interfaces?! Issues, help needed!

Ok well basically i'v always used a pc to do music using cubase and a variety of hardware including a steinberg mi4 external audio interface connected via usb. Now on my pc which is actually less powerful than my new macbook (the 2.2ghz model) the interface works with out fault no latency, no distortion.
However once used on my new shiny macbook, for which i'v purchased logic pro as opposed to cubase (felt like a change) when trying to use my interface via usb on the mac through logic i seem to have issues with recording and all sound comes through distorted with a great deal of latency. I'v tried altering the sample depth and the bit rate and nothing seems to work?
I have downloaded mac specific drivers for the hardware so i'm sure its not a driver issue?
Anyone with any suggestion, cos i'm a bit gutted really?
P.s. Does anyone know if you can change the graphics card in a macbook?
Ben

Hi, im having the same issue, using garageband and logic pro. I used pc to make music with no problems at all with my Zoom g9.2tt guitar fx usb interface.
Now with mac i get distorted and lots of latency.
One way i found that can make this work with garageband is use the internal sound card to play sounds and the usb interface to record this helps a lot. This trick makes it for garageband but not for logic pro(still getting distortion/latency).
By the way i used to have an emachines laptop with 512 ram memory and a 1,6ghz semprom processor, believe or not, easier to record on that one, with no latency and no distortion.

Similar Messages

  • Logic and audio interface issues. help!

    Hey guys
    I recently bought a small budget recording studio, My first one so bare with the newbie questions and I'm having diffucties with the setup I believe.
    I connected my midi keyboard to my computer that had Midi in/out from the keyboard via USB Midi interface to the computer. That was all cool. The computer was seeing it and in Logic was telling me signals were coming into logic.
    I then connected my Edirol audio interface ( FA-66 ) 6in/6out. to the computer via Firewire. Midi setup in utlilities sees the device. And that's good right?
    I then used stereo jacks to connect the audio interface to my studio monitors. I played a song in itunes music is coming through the speakers, great!
    Now off to the problem, finally. The reason I got the audio capture device is so that I can record Vocals and guitars, but the thing is when I connect my Mic and guitar to the device no sound in coming into logic, eventhough I can play the guitar clean through my monitor speakers. Very strange. I see 6 input/output channels in logic so it sees the edirol. So if i set Input 2 in logic and put the guitar in inputjack 2 the signal doesn't get through.
    Am I supposed to intertwine the Midi keyboard and audio interface together? If so how is that done? Can anybody help?
    Thanks for baring with the newbie!

    Don't go beating yourself up... you'll rob the trolls of their only pleasure.
    It's like you said: you're new. We were all new once.
    Glad you're up and running... let's hear some music.
    jord

  • Lenovo g580 do I need to buy an external audio interface to record live instruments and voice ?

    Hello,  If anyone could help me please ?, I am wondering do I need to buy an external audio interface to record live instruments and voice onto my lenovo g580.?
    My friends have said that good laptops have audio interface's built in... but I cannot see how this could work as I am trying to build a home recording studio. Do they mean that I just need to have a mixing desk ? As the audio interface is already in my laptop, ?
    Another question I have is... I have bought a microphone to record with a studio mic. But when I plug it into the headphone socket, it works as a speaker and not as a microphone. Please can you tell me how do I make it work as a microphone, and record on ableton. Thanks. I live alone with two cats so I'd really appreciate some help ! 
    Thank you very much, best wishes. 

    man 'O tunes wrote:
    I'm preparing to expand my studio from a 1 man songwriting system,
    to add the capability to record a complete live band, with 16 separate
    simultaneous tracks recording. Am I dreaming?
    Nope. I've been recording live bands with up to 56 channels at 24 bit 48kHz for three years now.
    1) Does my computer have enough native power to handle such a task?
    Yes. The actual recording uses the hard drive buss, so you need to make sure you have fast drives and a dedicated FW or SATA buss for them.
    2) Is there an audio interface device that could help shoulder some of
    the cpu load?
    No. CPU is used only for routing audio, effects, etc. An audio interface is used to route the audio in and out of the computer, and as such does not process effects at all.
    3) is it possible to use my multiple, fast internal drives to help?
    Yes. Although with Logic Pro you can use only one drive at a time for recording. HOWEVER, I have been able to use SATA drives to record up to 56 tracks AT ONCE. So there is plenty of power there.
    4) If not 16, what's the highest realistic track count I can hope for?
    Again, I have done 56 tracks. 16 is a walk in the park in comparison to 56. I would recommend you invest in Apogee AD16X and DA16X, since in one interface you get ALL 16 inputs, and the other gives you the 16 outputs to go to, say, a mixer. And the sound quality is very very very good.
    thanks in advance
    You're welcome.
    Cheers

  • Connect firewire audio interface and external monitor

    I have just bought my MacBook Pro 13 and I will mainly use it for audio recording . I have connect my audio interface through the firewire port. I need to connect an external monitor . The only available ports are thunderbolt and USB . Can I connect a monitor with these available ports ?

    Hi charisio,
    Thanks for visiting Apple Support Communities.
    If you would like to connect an external display to your MacBook Pro, you can use the Thunderbolt port. See these articles for some good information about Thunderbolt:
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    http://support.apple.com/kb/ht5219
    OS X Mountain Lion: About Thunderbolt
    http://support.apple.com/kb/PH11407
    All the best,
    Jeremy

  • Volume control when using front row with an external audio interface

    Hi,
    I got my macbook last week, and so far, I love it. But I've got a small gripe with FrontRow - in my room at college, I have my macbook plugged into an oldish Tascam US-122, which I use a lot for recording. The Tascam is connected to my expensive active speakers, and ideally, I'd like to be able to play back via FrontRow to the Tascam, to the speakers, while retaining remote control. This isn't a problem for selecting Photos/Videos/Music etc, but the problem arises when I want to change the volume - the remote simply controls the volume of the macbook's internal speakers, not affecting the output of the Tascam.
    I know I could just connect the speakers via the headphone output, but that would mean more cables, and more chopping and changing system preferences to suit whether I'm making music or just listening.
    *So - is there any way at all that I can make the macbook's global volume control (using the volume hotkeys and remote) affect the signal its sending (via USB) to the Tascam?* I know its not impossible, because until recently I used it with a PC running XP, and that allowed me to use the volume control app to boost or cut the Tascam's volume. Perhaps its an issue with the Tascam's OSX driver?
    The Tascam has its own physical volume knob, so its not like I'm stuck listening at deafening or very quiet volumes, and I know this sounds like an issue with my laziness rather than FrontRow or the macbook, but surely it defeats the point of FrontRow if I have to walk across the room every time I want to turn the tunes up or down?!
    Any help would be much appreciated!
    Cheers,
    Thom Bishop

    hmm, yeah, thats kinda what i suspected - i reckon this is to do with the way the frontrow interface is set up, but theres no way (as far as i can see) to make everything pass through the main system stereo channel BEFORE going to an external audio interface... which is COMPLETELY bizarre, since system sounds/alerts get passed to the audio interface fine.
    and no, i very much doubt whether ANY external audio interface would respond to apple remote (gap in the market, perhaps?).
    this would be a fairly simple problem to solve, if only apple were aware of it... of course, i COULD try getting to grips with audio units and seeing if i couldnt fix it myself, but ive frankly not got the time to learn how that works! how can i make apple aware of this issue?? are they already aware??

  • Software installation external audio interface fails Terratec dmx6 fire usb

    Software installation external audio interface fails Terratec dmx6 fire usb.
    Dear Apple Power User in this forum,
    here is a question for some of us experts.
    I have a external usb audio interface Terratec, Model: DMX 6 fire USB.
    http://www.terratec.net/en/products/technical-data/produktetechnische_daten_en3246.html
    0. There should be after install enclosing software an control app in the app folder, but it isnt there. Why?
    1. the attached installer protocol seems to be normal. isnt it?
    2. the usb audio hardware appears in system profiler.
    3. there isnt the audio hardware in audio-midi-setup! Why?
    4. one of the installed content is visibil in activity monitor as an extension "35 DMX6FireService root 0,0 1 964,00 KB 18,55 MB 22 Intel 00.01 176,00 KB 184,00 KB 73 72"
    5. an other part is in the system-library-extension folder "TTDMX6fire.kext"
    6. other files i am not capacity to find....
    7. and there is the app missing in apps folder! Whitout that it can not work.
    8. Software is for 10.5 and 10.6 32-bit tested from the vendor!?
    9. My MacBookPro early 2008 2.4ghz is capabel of 64bit but is default in 32 mode says apple spec, also my osx 10.5.8 newest updates should be 32 bit. Isnt it?
    10. installation tested whit disconnected/connected ext. volumes or display or these audio interface, whith repaired permissions, on two different macs (second is iMac), whit reboot,
    11. tested on different usb ports, usb port test passed whith other equipment,
    12. on windows xp all works.
    13. tested on a new admin user, same problem.
    14. searched whith terminal command line in applications, nothing.
    15. get software from cd and homepage, no effect.
    16. asked vendor: "until now never had problems like that"
    any ideas? please help!
    for testing or showing the installer look here:
    http://www.terratec.net/en/driver-and-support/driver_21300.html?selectproduct=DM X%206Fire%20USB
    Installation Protocol:
    Dec 25 00:08:39 cadas-macbook-pro /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[400]: vm_allocate: 0, 0x5800000 - 0x25800000
    Dec 25 00:08:39 cadas-macbook-pro /System/Library/CoreServices/Installer.app/Contents/MacOS/Installer[400]: vm_protect: 0
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: @(#)PROGRAM:Install PROJECT:Install-388
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: @(#)PROGRAM:Installer PROJECT:Installer-281
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Hardware: MacBookPro4,1 @ 2.40 GHz (x 2), 4096 MB RAM
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Running OS Build: Mac OS X 10.5.8 (9L30)
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: TMPDIR=/var/folders/gC/gCDdYZuFE98Z28wIB40BeE+TI/-Tmp-/
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SHELL=/bin/bash
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: HOME=/Users/cada
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: USER=cada
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: LOGNAME=cada
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: DISPLAY=/tmp/launch-MQSZjG/:0
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SSHAUTHSOCK=/tmp/launch-x3IAC1/Listeners
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: ApplePubSub_SocketRender=/tmp/launch-YalWkk/Render
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: _CF_USER_TEXTENCODING=0x1F5:0:3
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: SECURITYSESSIONID=a1b410
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Env: COMMAND_MODE=unix2003
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: DMX6fireUSB Installation Log
    Dec 25 00:08:39 cadas-macbook-pro Installer[400]: Opened from: /Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg
    Dec 25 00:08:39 cadas-macbook-pro installdb[402]: started (uid 96)
    Dec 25 00:08:39 cadas-macbook-pro installdb[402]: Opened receipt database on '/' with schema 17.
    Dec 25 00:08:45 cadas-macbook-pro installdb[402]: done. (0.004u + 0.003s)
    Dec 25 00:09:10 cadas-macbook-pro runner[403]: Administrator authorization granted.
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: =============================================================================== =
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: User picked Standard Install
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Choices selected for installation:
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6fireUSB"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6FireUSBCpl"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#dmx6fireusbcpl.pkg : com.terratec.dmx6fireusb.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6fire.pkg : com.terratec.dmx6fireusb1.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "TTDMX_6fire_CUSTOMEXT"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6firecustomext.pkg : com.terratec.dmx6fireusb2.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "TTDMX6fire"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#ttdmx6fire-1.pkg : com.terratec.dmx6fireusb3.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "DMX6FireService"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#dmx6fireservice.pkg : com.terratec.dmx6fireservice3.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Aktualisieren: "LaunchDaemon"
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: dmx6fireusb.pkg#comterratecdmx6fire.pkg : com.terratec.dmx6fireusb4.pkg : 1
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: =============================================================================== =
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: It took 0.00 seconds to summarize the package selections.
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#dmx6fireusbcpl.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6fire.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6firecustomext.pk g
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#ttdmx6fire-1.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#dmx6fireservice.pkg
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg#comterratecdmx6fire.pk g
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: _installNextPackage of 1
    Dec 25 00:09:15 cadas-macbook-pro installdb[405]: started (uid 96)
    Dec 25 00:09:15 cadas-macbook-pro installdb[405]: Opened receipt database on '/' with schema 17.
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Starting installation:
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Preparing volume "250GB_MBPro2" for installation
    Dec 25 00:09:15 cadas-macbook-pro Installer[400]: Configuring volume "250GB_MBPro2"
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Preparing disk for local booted install.
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Free space on "250GB_MBPro2": 11,6 GB (12495523840 bytes).
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Create temporary directory "/private/tmp/dmx6fireusb.pkg.400aysS6s"
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Running install actions
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Processing dmx6fireusbcpl:
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: It took 0.06 seconds to create the install plan for dmx6fireusbcpl.
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:16 cadas-macbook-pro Installer[400]: run preupgrade script for dmx6fireusbcpl
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.pCJk/./preflight[408]: : deleting previous Kernel Extensions
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.pCJk/./preflight[408]: PID: 43
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: 20 of 20 files written in 0.05 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[419]: 408 kilobytes installed at 7.5 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6fire:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.03 seconds to create the install plan for ttdmx6fire.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: 9 of 9 files written in 0.01 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[420]: 92 kilobytes installed at 11.5 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb1.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6firecustomext:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for ttdmx6firecustomext.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: 9 of 9 files written in 0.01 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[421]: 80 kilobytes installed at 9.7 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb2.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing ttdmx6fire-1:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for ttdmx6fire-1.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: run preupgrade script for ttdmx6fire-1
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.MEBZ/./preflight[424]: : deleting previous Kernel Extensions
    Dec 25 00:09:17 cadas-macbook-pro /private/tmp/scripts.MEBZ/./preflight[424]: PID:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: Initializing new flat-package receipt.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: Extracting...
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: 9 of 9 files written in 0.03 seconds.
    Dec 25 00:09:17 cadas-macbook-pro payloadExtractor[435]: 832 kilobytes installed at 26.2 MB/s.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:17 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb3.pkg.bom"
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Processing dmx6fireservice:
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for dmx6fireservice.
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:17 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: Initializing new flat-package receipt.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: Extracting...
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: 2 of 2 files written in 0.01 seconds.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[437]: 136 kilobytes installed at 13.4 MB/s.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireservice3.pkg.bom"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Processing comterratecdmx6fire:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Determining files to install
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: It took 0.00 seconds to create the install plan for comterratecdmx6fire.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Configuring deferred files
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Determining obsolete files
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Assembling temporary receipt
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing pre-extraction actions
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Removing obsoleted files
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Creating destination path
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Validating package payload
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Starting file extraction
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: Initializing new flat-package receipt.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: Extracting...
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: 2 of 2 files written in 0.01 seconds.
    Dec 25 00:09:18 cadas-macbook-pro payloadExtractor[438]: 8 kilobytes installed at 1.0 MB/s.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Performing post-extraction actions
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finishing receipt
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Extracting BOM from "/Volumes/DMX6FireUSB.1.22/dmx6fireusb.pkg" to "/Library/Receipts/boms/com.terratec.dmx6fireusb4.pkg.bom"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Removing temporary directory "/private/tmp/dmx6fireusb.pkg.400aysS6s"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finalize disk "250GB_MBPro2"
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Notifying system of updated components
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/System/Library/Extensions'
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: _installNextPackage of 0
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: ** Summary Information **
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Operation Elapsed time
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: -----------------------------
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: script 0.29 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: zero 0.02 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: install 1.42 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: validate 0.01 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: os 0.00 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: extract 0.87 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: receipt 0.05 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: disk 1.01 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: config 0.19 seconds
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Starting installation:
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Finalizing installation.
    Dec 25 00:09:18 cadas-macbook-pro Installer[400]: Registering applications
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/Applications/./DMX6FireUSBCpl.app'
    Dec 25 00:09:18 cadas-macbook-pro runner[403]: Touched '/Applications/.'
    Dec 25 00:09:19 cadas-macbook-pro Installer[400]: IFDInstallController 868C80 state = 5
    Dec 25 00:09:19 cadas-macbook-pro Installer[400]: Displaying 'Install Succeeded' UI.
    Dec 25 00:09:24 cadas-macbook-pro installdb[405]: done. (0.026u + 0.040s)

    solved whith the old driver vom archive of vendor: "DMX6Fire_USBMac.1.00c.dmg" thats for 10.5.x for me works.
    The newest from the vendor delivered driver 1.22 (marked for 10.5 and 10.6) seems to not work under 10.5.

  • Are USB audio interface issues on iMac Haswell resolved?

    HI,
    i just ordered a 27 inch iMac, maxed out with a 1TB SSD.
    I noticed the imac doesn't have an audio in jack and figured i'd shop for a good USB Audio Interface.
    But then i came across all these USB audio interface issues on the new iMac.
    This is incredible to me because iMacs are often used by creative people and lots of musicians.
    For me audio is VERY important. I record music and i record sound for animation and video.
    Apple thus far seemed to be avoiding the topics and issues at hand.
    Are the USB audio issues resolved? What was resolved? What was the problem (Maverick? Fusion Drive)?
    Is it wise to choose for a Thunderbolt Interface? Which one?
    Any help would be hugely appreciated.
    Especcialy since it seems such a wide spread problem.
    Thanx

    doubt it would be a general issue
    usb is a universal serial bus it always require a driver for anything
    and the driver of one external audio device would act different then the driver from another external audio device
    so it would be very unlikely that an external audio card using a cirrus logic audio chip would cause the same issues with the imac as one with a realtek or soundblaster audio chip
    not that there could not be issues with all of them but not likely that they would suffer from the same issue

  • (MacOSX Lion 10.7.4) The problem of connecting the audio interface (USB and FireWire), grained acoustic distortion!?

    When you connect the audio interface to usb or firewire grained acoustic distortion, there is no loud noise in the acoustics! In the old "iMac24 Snow Leopard" was not like this!
    Just bought the iMac21 lion, installed the new drivers and the two interfaces of different firms is presented, this acoustic problem.
    I understand it comes from a usb and firewire!?
    Help Me_____
    Sorry for my english

    Well, it's been a few days and with no response I thought I'd look for another solution. I've been trying this software called iVPN, apparently it's like a front-end to OS X's built-in VPN server. Anyway, I disabled the VPN Server from the Server app, turned on iVPN and was VPN-ing from my iPhone over 3G in notime. It's a great app, though it kinda ***** that the server can't do what it's built to do. Since VPN was the big reason I got Server in the first place, I'll probably uninstall it and stick with OS X's built-in file sharing and iVPN.

  • Recomended External Audio Interfaces

    Hi i just bought a Mac Pro, and wanting to upgrade my audio card to an external audio interface i have a M-Audio 1010lt which does 96kHz, a friend said to get one thats 192kHz.
    Any recomendations?
    1. it has to be external, i might get a laptop to travel soon but i don't care about size or weight.
    2. i don't care about inputs, i would be happy with 1 input that is excellent quality, but it has to have a mic input and line input
    3.i would like to use pro tools, i haven't used it before but it seems like it is for me.
    I have been looking at:
    Edirol FA66
    M Audio firewire 410
    M Audio Audiofile 192 (internal)
    -Ryan

    Welcome R.H.A. let me solve this one,
    When it comes to M-audio stuff, on the converters side its entry-level,
    For a converters thats 192khz its an experiment, 24/96 is industry standard and even then most PPL will only use 16/44 or 16/48.
    As i said its an 192khz is an experiment, to see how they could push the Technology,
    having done that, the Data it use at 192khz is way over the top, without much change's where-as the human Ears would,nt be able to hear the difference from 96-192,
    so its point-less.
    Converters goes from prices of £400.00- £10,000.00.
    So i would recommend two of the best Brands converters all round, which is use and consider to be pretty much Pro-Converters, and is very affordable.
    Apogee & RME stuff,
    Fire-Face 800 will give 8 in and outs Analogue
    plus with the Adat bit another 16 ins and out with the right converters.
    Its like one of the best and most stable Firewire Interface ever made.
    Apogee
    has the track record of all time,
    bit heavy in price but its worth every penny,
    Rosetta 800 gives 8 ins and outs.
    Ensemble
    Is another product made by Apogee for Apple/Mac.
    Integrates wonderfully with Logic-Pro,
    However all the top Apogee Stuff has the C77 which is the Clock work in the Converters, thats also in the famous Big-Ben which is'nt found in Ensemble, thats seem to be a bit disappointment, and had lantency problems when they where first launch.
    So the truth is Ensemble will sound great but compare to RME Fire-Face 800 & Rosetta 800 its Wayyyyyyyyyyyyyyyyy Short.
    Do keep in mind, i dont work for any of these company.
    Fr.BlayZay.

  • Do i need an audio interface? HELP!!!

    Do i need an audio interface for logic to connect m audio speakers, a novation launchpad, and an akai mpk 25 keyboard?, Do i need an audio interface for logic to connect m audio speakers, a novation launchpad, and an akai mpk 25 keyboard?

    Wow. You have in your hands some of the most advanced and powerful music production software on the planet. Surely you would want an audio interface to make it sing rather than limp along. How are you going to control momitor level, headphone level, etc. If you are going to connect a mic, it is essential (unles you are going to opt for a USB mic. There are very few pros who would choose that option). Any audio interface will sound better than the sound card inside the mac, but if you go for something like Native Instruments Komlete 6, it's affordable, user friendly and sounds amazing. There are other good ones, like Focusrite and MOTU, but M audio and the lower range of Presonus are not in the same league and the more advanced users would avoid them.
    Hope this helps.

  • Firewire chain for external audio interface and hard drive

    I use Logic Studio 8 on a Macbook Pro with a Presonus Firebox, an external Lacie Firewire hard drive for audio recording, and another Lacie Firewire drive for backups.
    Is there a recommended chain order when chaining my Firewire devices together? I read somewhere on a ProTools forum that they recommend putting their Firewire audio interface Mbox2Pro at the end of the chain.
    So right now I have Macbook Pro -> Backup Drive -> Audio Drive -> Presonus Firebox. I once had it in a different order with the audio drive first, but I found it was reading more slowly from/to the audio drive when it was in that order. I have no idea technologically why this would be the case.

    I just found and joined this great forum. Following up on Ray's comments about his MacBook set-up, I have a similar MacBook 2ghz, 4mb ram, 9400 chipset, and am exploring getting into Logic Pro 8 and was wondering if my MacBook was underpowered, and whether I needed to step up right away to a MacBook Pro because of my lack of PCI slots for recording audio to an external eSATA drive.
    I was encouraged to hear that the USB 2.0 connection for Ray's external WD 7200 hard drive has worked and improved things and his audio isn't getting choked and he is not getting the clicks and other problems.
    I'm wondering if Ray or anyone else has any other tips on using a MacBook for Logic and for optimizing one's setup. And Ray, did you notice a point at which the clicks started? .. in terms of number of tracks? Or were they present from the outset? I'm wondering how many tracks you are running now on your system.
    I might mention that I don't have an audio interface yet but was impressed with what I've read about the Apogee Duet. Any comments on interfaces and the Duet?
    By the way, I'm just recording one instrument/one track at a time and perhaps occasionally two instruments at a time. And right now, my main purpose for getting into Logic is for editing and mixdown of pre-existing tracks that have already been created on a standalone hard-disc based DAW. If all goes well and if I like the whole Logic experience I'd expect to get a more powerful MacBook Pro or even a Mac Pro or whatever higher end iMac exists in the future.
    To summarize, all I'm intending to do initially with the MacBook is:
    1) transfer individual digital tracks from a standalone hard disc-based DAW into Logic for mixdown and mastering.
    2) Record a few extra new tracks one at a time - probably not using any instrument plug-ins but relying on external synth/sampler/guitar sound sources ..in each song (maybe 3-4 tracks at most), and
    3) apply standard effects like reverb and EQ and panning to the mix down and master songs, each song containing a of approx 25-40 tracks.
    My basic question is, can a MacBook 2Ghz with firewire 400, 4gb memory and USB2.0 to external hard drive handle this or is it underpowered? Thanks.
    Derek

  • Connecting external audio

    I am new to Mac and to Logic. I have a keyboard and a mic that I would like to connect and use for recording. I think I know how to connect through midi, but I would like to just line them in. I think I may have the wrong cords and I also can't figure out how to get it to use anything other than the internal mic. I thought that the people at the store had said that I could just use a patch cord and an adaptor. I have a patch cord that I usually use to connect to my amp, but this is a 1/4 inch plug. Is this accurate? What sort of adaptor do I need? I am so lost. I looked in the manual and it listed all sorts of cords and devices but nothing about what to do with them all. I really just need a step by step guide for how to connect a non digital audio source; to record using a device that is of the sort you plug into an amplifier. Do I need some sort of convertor? I used to use Acid on my PC years ago for creating music, and I swear that I just used the line in and never had to use midi.
    Help, anyone?

    If you want good results then first or later you'll have to buy an audio interface.
    For now this could help you:
    http://www.monstercable.com/productdisplay.asp?pin=2440
    cheers
    rob

  • What kind of audio interface do I need for audio out from MainStage 3?

    I have a Yamaha MO8 that I use for playing in the worship band at my church. In the past, I've just directly routed audio from the MO8 through a direct box and into the sound system.
    I'm looking to switch my setup and use the Yamaha MO8 as a midi controller in MainStage 3. I have this part working — the problem is getting the audio from my MacBook Pro.
    The audio output sounds fine through the MacBook Pro speakers or through headphones plugged into the audio out / headphone jack; however, if I plug the direct box into the MacBook Pro's audio out / headphone jack, the signal the sound system gets is very pretty weak and very distorted.
    I'm assuming I need an audio interface between my MacBook Pro and the direct box / sound system. Since it's a 2010 MacBook Pro, I'm assuming my only output option is USB (unless the digital audio out can be used). If that's correct, would something like the Scarlet 2i2 work for me?
    Thanks…

    Yes, you'll need some sort of audio interface to get a good signal back to your mixer. 
    The Scarlet 2i2 would work for you but you may find a few limitations.  I use a MOTU Audio Express and it has the advantage of being a mixer as well, so I can mix in a backup signal from the onboard audio outs of my controller (Kurzweil PC3x) in case MainStage goes down (it happens on rare occasion).  Firewire is my preference so the MOTU checks that box.  I also like that I can connect my MIDI cables to the MOTU and have one cable going into the computer.
    If you need this sort of compact redundancy, I would shoot a little higher than the Scarlet.  If you don't feel the need for a backup line and USB works for you, then the Scarlet unit would be an excellent value. 

  • Connection digital audio interface

    have a problem
    can't connect digital audio output of my interface in macbookpro to digital coaxial/optical input in monitor audio speakers
    what interface may i use?
    where is program switcher from analog to digital signal?
    p.s. connection audio to audio works perfectly
    help me anybody

    hello redshiftbr
    i was using an coaxial cable whith *conductor* (don't now in english) to mono 3.5 mini-jack:
    nothing wasn't work. specialists in electromarkets didn't propose any different metod. what did you mean "optical cable in the connection" - the audio output in my macbookpro it appears at the same audio input mini-jack 3.5 nothing more. i newer see optical input this type. can u send model name of u cable o any characteristics

  • Audio interface issues with Maverick

    I just got a new IMac and have found that four different audio interfaces won't work with it.  Most of these work with my old IMac.  I've tried the Apoge Duet, Saffire Pro 24, Presonus Audiobox USB and a new Mackie mixer with USB output.  The two of these that have software had lots of crashing issues.  Garage band and Itunes are crashing.  All of them work intermittently, but then fail with digital distortion or even Mac bluescreen (the little spinning rainbow thing). 
    I imagine this means I just need to return the computer, but wondered if maybe I just picked four audio interfaces that all just happen not to work with the new IMac and new OS 10.9.1

    Scott, I have a 2009 Macpro runing cubase 5.0 with a Mackie Onyx firewire audio interface that has run without major flaw for almost 5 years. I upgraded to Cubase 7.5 which required that I upgrade my OS, so I upgraded to Mavericks. I am now experiencing an unlimited number of dropouts, studders, clicks, and pops That make my$25,000+ studio virtually useless. I called Mackie, because my version does not have a driver as it is the older (non 1640i) version. They said that this version runs through Apple's core audio driver and there was really nothing they could do to resolve the issue (probably why the new 1640i has its own independant drivers). While with troubleshooting, the problem could still be a Cubase based problem, the forums I have read have shown problems like this occouring across a wide swath of different DAWS and audio interfaces. I believe the problem to be on apple's end, and specifically in some failure in Mavericks itself. I tried to call Apple about this problem, but apparently because my macpro is out of warranty they wanted to charge me $20 for my phone call (my Mackie is older than my studio computer, and though they couldn't solver my problem, they took the time to field my call free of charge). I believe what is going on is that they are using the free version of Mavericks to BETA test their OS, and will correct the issues as the complaints roll out. I am going to try and Install Mountain Lion on my computer and see if that solves the problem. It's only $20, and that is the cost of the support phonecall anyways. I'll tell you how it works out.
    To the moderators,
    I have been loyal to apple for over a decade. I currently own a 2009 Macpro, a 2011 macbook pro 17", a 2013 macbook pro 15", and a plethora of your gadgets. I have spent over $30,000 on apple products, and to charge me $20 for a phonecall for a issue that is most likely internal, and probably has a relatively simple solution is infuriating... Needless to say, the next time I spend $5-$10K on a studio computer, it will most likely not be an apple unless you resolve these issues. Thank you.

Maybe you are looking for

  • After Upgrading to 10.9.4, Apps Don't Quit, Won't Restart. Now What?

    I have a mid-2011 Mac Mini. It was a joy to use until OS X Mavericks came along. I'm on the road a lot, and remote into my Mac on a daily basis, whether it be from my iPad or laptop. Since upgrading to Mavericks, I've had to reboot the Mac about once

  • How to sort the messages in Browser Console by time

    In the Browser Console the messages are sometimes out of order. This can be confusing when debugging an application. Is there an easy way to sort the messages by the timestamps? See also: https://bugzilla.mozilla.org/show_bug.cgi?id=854435. It seems

  • Transfer HU to vendor VLMOVE

    Hello, I need solution for my customer process: 1. Step:  I use transfer PO subcontracting with HU for row material to vendor for subcontracting process (Transaction vlmove ) 2. Step: I perform GR for assembly product : goods issue from vendor stock 

  • ESS 1.50 WD ABAP application Customization

    Hi Experts, We have deployed ESS 1.50 on our Portal 7.02  system. This ESS 1.50 version is completely WebDynpro ABAP Based.In which we need to make changes in ESS application. So,kindly share some pointers on how to make changes in WD ABAP applicatio

  • Dmenu error: No locale support

    My dmenu recently started to spit out this error: $ echo -e "foo\nbar" | dmenu no locale support According to wiki:dmenu this is because of an invalid encoding in $LANG. However, I can't figure out whether $LANG should be set to "en_DK.UTF-8" (as it