Connecting external camcorder

I'm in need to use a external camcorder for live streaming video from my Macbook pro. When I connect the camera (PAnasonic AGPX170) nothing happens, it seems like the computer doesn't recognize it. Is there any aditional software/hardware needed? Any help?
Thanks in advance.

Good idea, Karl.
I also remember reading some time ago that some FW hubs are OK with iMovie, or camcorders, and others not.
I haven't used a Canon camcorder for ages, but I do know that the Belkin and CharisMac Dino FW hubs certainly work with (my) Sony camcorders.
The Belkin hub looks like this:
<img src="http://images.belkin.com/F5U526ukAPL-S/STD1_F5U526ukAPL-S.jpg"
..and the Dino hub like this..!
<img src="http://www.charismac.com/images/hubzilla.jpg"
P.S; JUST REMEMBERED: I don't think the Dino hub is powered, so that ..going by Karl's suggestion.. may NOT work. But the Belkin definitely IS powered (..see the little power supply connector socket in the picture..) and comes with a massive mains-to-5v (sorry; that's for USB) ..mains-to 12v power transformer.

Similar Messages

Use of external camcorder

Hi
I have a late 2012 Imac and want to record directly using an external camcorder [Sony HDR-CX190E]. I just dont seem to be able to get iMovie to recognise that i have connected an external camcorder. It always just finds the isight camera. Can anyone help me?
Thanks in advance
P

(1) I don't think camcorder recording directly into iMovie is going to work with your Flash Memory-based camcorder.
As explained in http://support.apple.com/kb/PH2155
... If your computer doesn’t come with a built-in iSight camera, connect a tape-based camera or camcorder...
A tape-based camera with Firewire connectivity like my Canon VIXIA HV40 works splendidly. Sony also makes some Tape-based, Firewire-connected hi-def camcorders in a higher price range, but I personally have not tested any of them.
(2) For help getting iMovie to recognize your camcorder for importing video you have recorded on the camcorder so you can edit it iMovie, see http://support.apple.com/kb/TS1059#3
Message was edited by: EZ Jim
Mac OSX 10.8.3

Is it possible that iMac corrupts connected external hdd-s drive via USB?

Is it possible that iMac corrupts connected external hdd-s drive via USB? (two wd cav. green 2tb from different purchase went down in one day, both from the backside usb ports)
First one of my video storage hdd, full of files suddenly got extremely slow, and a few minutes later, it unmounted itself, but with the unmount error, but nobody even touched the cables, electricity etc. When I tried to mount it again, it did not respond, just give a periodical load light and ticking. First I thought it must be hardware failure, but since I bought a brand new drive today and it made the same problem as soon as I tried to format it. I got suspicious. The consol, said about these - i googled all but now solution so far. (WesternFresh is my drive)
Oct 23 17:10:58 xxxx fseventsd[47]: disk logger: failed to open output file /Volumes/WesternFresh/.fseventsd/636573acca1d6550 (No such file or directory). mount point /Volumes/WesternFresh/.fseventsd
Oct 24 10:55:42 xxxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 24 17:23:05 tmdc diskarbitrationd[16]: unable to probe /dev/disk1 (status code 0xFFFFFFFA).
and there was an I/O faliure not but it was on another mac - where i hoped itt will come back to live.
I think - if it is possible - that the OS maybe misunderstand something about these drives, and try to change - maybe permissions - all the time if a usb external connects...? (I am not really into it as you see )
Also about Disk Utility - it does not see any partition on the old hdd, but i shows the name of the product. If I connect the new hdd via the keyboard usb, the disk utility is able to see and format it, but the hdd will be still slow and tikking after it.
Also I tried Disk Warrior (freezd out) and Techtool Pro 6 thanks to some ol'frineds - which also not saw the old hdd, but did nothing useful with the new one.
About cav green: I have 3 of them and no error so far, and got 4 1tb cav green in 2 mybook studio II also without any problem.
Iam a bit scared, and try not to plug in any usb hdd-s now, but I have to continue work, so I need solutions.
I hope if it is not hardware failure, maybe some tricky terminal code will bring back the viability of my old hdd - and I won't have to spend a lot of money to recover data.
strange.
if anybody has a clue?
update 1:
i found this post also:
https://discussions.apple.com/message/15905481#15905481
I also made the mentioned steps - but it is a bit different sice it reproduce itself and I cant use DU.

It turned out that WD is the big bad guy in this game.
According the data rescue company where I asked for an inspection, both of the drives had their reader head loose. And in the one, which was my already-in-use disk its even damaged the platters... xxxxx
So its time to pay bunch of money to recover, and take a walk to wd service to bang on the desk.
Also note - it may be somehow related to intellispeed technology - since macs not really friendly with wd-s built-in solutions.
On the other hand, with WD GP 1Tb there is no problems at all for ages.
thanks guys, thread is closed

Suddenly the USB ports in my Macbook Air are not detecting the connected external devices

So far I have connecting external hard disk to my Macbook Air and they were working finr. Suddenly none of these are bing detected. Kindly support

You may want to reset the SMC and see if this resolves your issues.
Read this article on how to do this. http://support.apple.com/kb/ht3964

How to connect external database(Ex:SQL Server/Tivoli) from ABAP Webdynpro

Hi,
Any one have idea how to connect external database like SQL Server/Tivoli to access tables from WebDynPro ABAP.
Please point to me some links if you have
Thanks
Praveen

Hi,
Please check out this link -
FETCH DATA FROM ORACLE DATABASE USING Web Dynpro
Regards,
Lekha.

How to connect external sensors to labview?

i want to ask How can i connect external sensors to NI labview for my final year project.? here are my lists of sensors:
a. Temperature sensor (LM35)
b. Humidity sensor (HH10D)
c. Light sensor (LDR)
d. Moisture sensor

simply_me wrote:
I've used the NI's bread board (with DAQ assistant initially) when I was in school. We used it for temp, light, and etc... measurements, the whole system is very straight forward. I would say having the option to simulate signals is a big plus in that. From what you described, I don't think the "slower" rate of data acquisition will disturb you at all. But more information is needed on your sensors and general functional spec.
@ NIquist & RTSLVU, please correct me if I'm misleading/wrong :-)
Is that the ELVIS stuff? Very neat but kind of pricey (unless the school is paying! )
Again, the low-cost USB DAQs from NI or MC are the way to go for the OPs project. I am assuming that he has enough electronics background to make simple signal conditioning circuits for his sensor chips.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

How to connect external trigger PCI-1433

Hi all:
I met the same problem as this old post: https://forums.ni.com/t5/Machine-Vision/How-to-connect-external-trigger-PCIe-1433/m-p/1677560/highli...
however the post did not give solution.
I am having an issue getting the external trigger( from PCI 6259) to work with a cameralink camera, a PCIe-1433 card . The PCI 6259 is connected to BNC 2111, the output trigger signal from CTR0 is connected to the SMB connector on the 1433 card and is providing pulse train at TTL voltages (0-5V). Using the MAX SOFTWARE and under the Acquisition tab I have CC1 set to external 0, however the camera is not receiving this external trigger. The camera is Basler 4096-140km.
I measured the ouiput signal from CTL0, the sigal seems good.
I tried RTSI trigger before, failded. I thought SMB should be more straight forward, seems I was wrong.
Looking forward to reply!
Attachments:
camera configuration.jpg ‏168 KB
External Camera Trigger(SMB).vi ‏57 KB

Bobjojo,
You will actually need to affect the properties of both the camera and the frame grabber to take advantage of this triggering mode. I found a document that contains a good run down of the process to acquire in this mode (linked below). As far as the programming for the acquisition is concerned, the frames will be built at the driver level for the specified frame height. This means that the IMAQ driver will composite the line scans for you, and any simple acquisition (the document shows using the Vision Acquisition Express VI) will be able to pull the image into LabVIEW.
www.ni.com/white-paper/13786/en/pdf
Karl G.
Applications Engineer
ni.com/support

How to connect external speakers to Satellite A100-451

Hello,
I have a Satellite A100-451 (UK) running Vista. I want to connect external speakers. There is a 'headphones' jack on the front (3.5mm jack I think), can I connect external speakers here? The speakers are 'PC Line' with their own power supply and also have a 3.5mm jack plug).
Thanks
KK

You need the audio Line-out put and the headphone jack provides this output.
In other words you can use this jack to connect the external speakers

How to connect external display to iMac

which port do I use to connect external display to my iMac ?

Welcome to Apple Support Communities
Depending on the iMac you have, you have different ports: Mini-DVI, Mini DisplayPort or Thunderbolt. Mini DisplayPort is available in 2009 and newer iMacs, and Thunderbolt is available in the Mid 2011 and Late 2012 iMac.
You have to use one of those ports to connect an external display. You will probably have to look for an adapter, depending on the port the external screen has got

How to Bridge Actiontec GT704WGB modem/router combo so that I can connect external wireless router?

I am having a hard time to bridge the actiontec GT704WGB
On verizon site there are instructions but they are only for GT704WG without the B. B I beleive is a more latest modem/router combo.
Can anyone please help me guiding on how to setup the actiontech GT704WGB to Bridge mode so that i can connect external router to it?
I would really appreciate a prompt response.
Thanks
Alish

http://www22.verizon.com/ResidentialHelp/HighSpeed/Networking/SetUp/Actiontec704WG/123754.htm
Try this link for details.

How to connect external webservice from ABAP

Hi,
Please see code pasted below and tell me what is wrong.
We try to connect external webservice via https. Should I install certificate is SAP for this connection? (if YES, how can I do this?)
Should I configure something else in SAP to connect external webservice via https?
DATA: client type ref to if_http_client,
        lv_content type String,
        lv_xml_string type string,
        lv_length type I,
        lv_response type I,
        lv_node type ref to IF_IXML_NODE,
        lv_xml_doc type ref to cl_xml_document.
****Create the HTTP client
call method cl_http_client=>create_by_url
   EXPORTING
     url    = 'http://services-demo.krd.pl/raina/1.0/KrdAPI.asmx'
   IMPORTING
     client = client
   EXCEPTIONS
     others = 1.
CALL METHOD CL_HTTP_CLIENT=>CREATE
EXPORTING
    HOST               = 'services-demo.krd.pl'
     SERVICE = '443'
    SCHEME = '2'
   PROXY_HOST         =
   PROXY_SERVICE      =
   SCHEME             = SCHEMETYPE_HTTP
   SSL_ID             =
   SAP_USERNAME       =
   SAP_CLIENT         =
IMPORTING
    CLIENT             = client.
EXCEPTIONS
   ARGUMENT_NOT_FOUND = 1
   PLUGIN_NOT_ACTIVE = 2
   INTERNAL_ERROR     = 3
   others             = 4
CONCATENATE
'<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"'
' xmlns:xsd="http://www.w3.org/2001/XMLSchema" '
'xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:rain="http://raina.krd.pl">'
'<soapenv:Header/>'
'<soapenv:Body>'
'<rain:Login soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">'
'<id xsi:type="xsd:string">B03EB34F02</id>'
'<password xsi:type="xsd:string">Akquinet99</password>'
'<appId xsi:type="xsd:string">test</appId>'
'<appInstId xsi:type="xsd:string">test</appInstId>'
'<custom xsi:type="xsd:string">test</custom>'
'</rain:Login>'
'</soapenv:Body>'
'</soapenv:Envelope>'
INTO lv_content.
CALL METHOD client->request->set_header_field
    EXPORTING
      name = '~request_method'
      value = 'POST'.
CALL METHOD client->REQUEST->SET_HEADER_FIELD
EXPORTING
    NAME = '~request_uri'
    VALUE = '/raina/1.0/KrdAPI.asmx?'.
CALL METHOD client->request->set_header_field
    EXPORTING
      name = 'Content-Type'
      value = 'text/xml; charset=utf-8'.
call method client->request->set_header_field
    EXPORTING
      name = 'SOAPAction'
      value = 'Login'.
lv_length = STRLEN( lv_content ).
call method client->request->set_cdata
    EXPORTING
      data   = lv_content
      offset = 0
      length = lv_length.
****Make the call
client->send( ).
****Receive the Response Object
call method client->receive
    EXCEPTIONS
      http_communication_failure = 1
      http_invalid_state         = 2
      http_processing_failed     = 3
      others                     = 4.
*****Get the response content
client->response->GET_STATUS( IMPORTING CODE = lv_response ).
lv_xml_string = client->response->get_cdata( ).
Regards,
Michal

HI ,
        Error in accessing External Web Service
Calling a secured external web service from ABAP
Edited by: A kumar on Aug 21, 2008 11:58 AM

IPod Photo stuck in "connect external power" mode

I recently purchased a used 60gb iPod Photo from a Goodwill. I restored it, but it required me to update. Restored, updated, but being an older iPod, the screen showed the "connect external power" icon. I found an external power source and it has been connected for nearly 2 hours, and it still isn't responding. I think it's stuck but I'm not sure. I've tried resetting it and using multiple different outlets, but nothing seems to be working. It still shows the external power logo.

The iPod photo is a 4th gen iPod, and that particular model requires you to connect it to an Apple USB power adapter to complete the Restore process (it's not related to doing an update). These iPod's came with a USB power adapter, so the expectation is that the iPod's owner has one. I heard this is because the iPod needs a higher voltage that is not available from a computer's USB port to complete the Restore, which is probably why it does not work with the "external power source" you tried.
You need to get an Apple USB power adapter. Or, if there is an Apple Store nearby, you can probably take it there (to the store's Genius Bar) and ask if you can plug it into one of their power adapters, to complete that last step. Do not have them do the full Restore process on a Mac, if you use Windows.

Sound - My built speakers do not show in the output section in sound system preferences area only digital out hence unless I connect external speakers I have no sound - can anyone assist?

on my IMac the internal speakers have ceased working - in the sound preferences area only digital out sound is there no internal speakers to choose so unless I connect external speakers I have no sound

Hey Jack (woofman jack)
Sounds like the micro switch inside the output jack that switches the audio from internal to external is stuck on external. Try plugging a set of buds, headphones or digital Toslink adapter in and out a few times to see if it will unstick the micro switch. You also might try jiggling a tooth pick around inside the audio output jack to see if that unsticks it? If not then you'll need to make an appointment at your Local Apple Store or Apple Service Provider and have the jack serviced.
Dennis

Lync 2011 for MAC not connecting externally to On-Premise Lync 2013

Hello,
Hopefully someone has some idea on this or a better direction for me to follow. So currently I have an issue where Lync 2011 for MAC clients will not connect when external to my On-Premise Lync 2013 servers. Everything to do with my Windows based clients
and even cell phone based client’s works just fine. It is currently only Lync 2011 for MAC which will not correct externally.
I did initially have the logon problem internally as noted by other posts online when using an internal CA certificate with Lync. But with the internal certificate imported onto the MAC when internally connected Lync 2011 will login just fine. Now in my
setup I do have a TMG server that clients are connecting to that forwards the connections onto my Lync servers when connecting externally. When I review live real time logs to see what’s connecting to the external URL for Windows based clients I can see them
connect in on port 443 no problem.
But with the MAC I don’t see any attempt from it to connect to the URL like I see with the Windows clients. Now below is what shows up in the Microsoft-Lync.log generated by the MAC. Now initially looking at the log I thought my problem was the fact when
Lync 2011 tires to connect when external that it was doing so on port 5061 which we don’t have open. So I tired entering external.mydomain.com:443 in for my external server in the setup.
And while rechecking the log after doing so shows like it is now trying to connect on port 443. When reviewing TMG I again see no connection attempt by the MAC to connect to the Lync external url or on port 443. Further research so far into the problem has
come up empty on the subject. And most other cases where people report problems connecting externally they are using some form of online service like Office 365. So at this point I am not even sure if Lync 2011 for MAC is supposed to work externally with On-Premise
Lync 2013 deployments or not. If anyone has an thought’s or idea’s please share them as at this point I am stuck on this issue.
Microsoft Lync 14.0.10 (141024)
MacOS version 10.7.5 (build 11G63)
2015/01/08 08:51:11.807 SIPService::OnEvent(IApplicationLayerEvent &), type: 0, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:12.670 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 0, newState: 10, direction: 0
2015/01/08 08:51:12.682 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:12.685 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.192 Office Communications Server LOGON STARTED: USER = {nsayewich}
2015/01/08 08:51:20.197 SIPService::Logon
2015/01/08 08:51:20.281 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.543 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.543 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.566 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.566 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.568 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.568 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:20.600 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 10, newState: 20, direction: 0
2015/01/08 08:51:21.535 InternalConnect, NLResolveAddress returned: -3176
2015/01/08 08:51:21.537 IsLocalAddress, 'internal.mydomain.com' is not a local address
2015/01/08 08:51:21.537 FShouldUseProxy, is returning 1
2015/01/08 08:51:21.537 Connecting to internal.mydomain.com (port 0)
2015/01/08 08:51:21.537 InternalConnect, NLCreateConnection returned: -3176,
2015/01/08 08:51:21.537 FUsingHttpsTunnelProxies, returning: 0
2015/01/08 08:51:21.537 Listening thread got exception -3176
2015/01/08 08:51:23.632 InternalConnect, NLResolveAddress returned: 0
2015/01/08 08:51:23.633 IsLocalAddress, 'external.mydomain.com' is not a local address
2015/01/08 08:51:23.633 FShouldUseProxy, is returning 1
2015/01/08 08:51:23.633 Connecting to external.mydomain.com (port 5061)
2015/01/08 08:51:38.004 InternalConnect, NLCreateConnection returned: -3259,
2015/01/08 08:51:38.004 FUsingHttpsTunnelProxies, returning: 0
2015/01/08 08:51:38.004 Listening thread got exception -3259
2015/01/08 08:51:38.005 InternalConnect, NLResolveAddress returned: 0
2015/01/08 08:51:38.006 IsLocalAddress, 'external.mydomain.com' is not a local address
2015/01/08 08:51:38.006 FShouldUseProxy, is returning 1
2015/01/08 08:51:38.006 Connecting to external.mydomain.com (port 5061)
2015/01/08 08:51:53.008 InternalConnect, NLCreateConnection returned: -3259,
2015/01/08 08:51:53.008 FUsingHttpsTunnelProxies, returning: 0
2015/01/08 08:51:53.008 Listening thread got exception -3259
2015/01/08 08:51:55.026 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x80072743, oldState: 20, newState: 10, direction: 1
2015/01/08 08:51:55.026 Login (1) failed with error: (0.-2147014845)
2015/01/08 08:51:55.036 SIPService::OnEvent(IApplicationLayerEvent &), type: 8, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.036 SIPService::OnEvent(IApplicationLayerEvent &), type: 2, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.036 SIPService::OnEvent(IApplicationLayerEvent &), type: 4, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.037 SIPService::OnEvent(IApplicationLayerEvent &), type: 6, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.037 SIPService::OnEvent(IApplicationLayerEvent &), type: 4, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.038 SIPService::OnEvent(IApplicationLayerEvent &), type: 6, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.038 SIPService::OnEvent(IApplicationLayerEvent &), type: 4, HasSignedIn(): 0, HasSignedOut: 0
2015/01/08 08:51:55.040 SIPService::OnEvent(IApplicationLayerEvent &), type: 6, HasSignedIn(): 0, HasSignedOut: 0

Hi Nicholas Sayewich,
I tested in my lab and without any problem.
I also use TMG as Reverse Proxy and without configuring SRV records (My ISP don’t support SRV), after importing the root certificate onto MacBook, I can sign into Lync everywhere(internal
and external).
Please make sure that the certificate is set up to
Always Trust .
http://blogs.technet.com/b/nexthop/archive/2008/03/05/how-to-install-a-trusted-root-ca-certificate-on-osx-leopard-for-use-with-messenger-for-macintosh.aspx
And my log for your reference:
Microsoft Lync 14.0.10 (141024)
MacOS version 10.10.1 (build 14B25)
2015/01/09 22:40:15.802 SIPService::OnEvent(IApplicationLayerEvent &), type: 0, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:16.486 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 0, newState: 10, direction: 0
2015/01/09 22:40:16.493 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:16.496 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.595 Office Communications Server LOGON STARTED: USER = {MyDomain\LyncUser1}
2015/01/09 22:40:32.596 SIPService::Logon
2015/01/09 22:40:32.633 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.737 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.738 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.743 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.743 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.744 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.744 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:32.754 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 10, newState: 20, direction: 0
2015/01/09 22:40:33.080 InternalConnect, NLResolveAddress returned: 0
2015/01/09 22:40:33.082 IsLocalAddress, 'sipinternal.MyDomain.com' is not a local address
2015/01/09 22:40:33.082 FShouldUseProxy, is returning 1
2015/01/09 22:40:33.082 Connecting to sipinternal.MyDomain.com (port 5061)
2015/01/09 22:40:48.008 InternalConnect, NLCreateConnection returned: -3259,
2015/01/09 22:40:48.008 FUsingHttpsTunnelProxies, returning: 0
2015/01/09 22:40:48.010 Listening thread got exception -3259
2015/01/09 22:40:50.043 InternalConnect, NLResolveAddress returned: 0
2015/01/09 22:40:50.044 IsLocalAddress, 'sip.MyDomain.com' is not a local address
2015/01/09 22:40:50.044 FShouldUseProxy, is returning 1
2015/01/09 22:40:50.044 Connecting to sip.MyDomain.com (port 443)
2015/01/09 22:40:50.896 InternalConnect, NLCreateConnection returned: 0,
2015/01/09 22:40:50.896 InternalConnect, NLCopyConnectionBinding returned: 0,
2015/01/09 22:40:52.980 InternalConnect, NLResolveAddress returned: 0
2015/01/09 22:40:52.981 IsLocalAddress, 'sip.MyDomain.com' is not a local address
2015/01/09 22:40:52.981 FShouldUseProxy, is returning 1
2015/01/09 22:40:52.981 Connecting to sip.MyDomain.com (port 5061)
2015/01/09 22:40:53.291 InternalConnect, NLCreateConnection returned: 0,
2015/01/09 22:40:53.291 InternalConnect, NLCopyConnectionBinding returned: 0,
2015/01/09 22:40:53.522 HRESULT GetLinkSpeed(DWORD, DWORD*, WIN_BOOL*): ip 192.168.100.187, link speed 0
2015/01/09 22:40:53.522 HRESULT GetLinkSpeed(DWORD, DWORD*, WIN_BOOL*): Working around 0 link speed
2015/01/09 22:40:53.526 SIPService::OnEvent(NModel::ILogonSessionEvent), hr: 0x0, oldState: 20, newState: 30, direction: 0
2015/01/09 22:40:53.528 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.529 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.536 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.555 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.555 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.583 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.584 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.592 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.592 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.615 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.615 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.622 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.622 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.784 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.784 SIPService::OnEvent(IApplicationLayerEvent &), type: 1, HasSignedIn(): 0, HasSignedOut: 0
2015/01/09 22:40:53.786 SIPService::OnEvent(IApplicationLayerEvent &), type: 3, HasSignedIn(): 1, HasSignedOut: 0
2015/01/09 22:40:53.787 virtual void SIPService::OnIdleHandleLogonSucceeded()
2015/01/09 22:40:53.792 Office Communications Server LOGON ENDED: USER = { MyDomain\LyncUser1}
2015/01/09 22:40:54.151 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:54.151 FShouldUseProxy, is returning 1
2015/01/09 22:40:54.379 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:54.379 FShouldUseProxy, is returning 1
2015/01/09 22:40:55.082 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:55.082 FShouldUseProxy, is returning 1
2015/01/09 22:40:55.440 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:55.440 FShouldUseProxy, is returning 1
2015/01/09 22:40:55.683 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:55.683 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.238 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.238 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.239 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.239 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.241 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.241 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.241 IsLocalAddress, 'lyncpool01' is not a local address
2015/01/09 22:40:57.241 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.241 FShouldUseProxy, is returning 1
2015/01/09 22:40:57.241 FShouldUseProxy, is returning 1
Best regards,
Eric

Proper way to connect external monitors to macbook pro?

I recently had to have the logic board in my mbp replaced and was wondering if disconnecting an external monitor while computer is on would cause the problem.
Should monitors be connected/disconnected with computer powered down?

If fact, the correct way to connect external displays is to have the MBP on, the external display on and seeking a signal, the external display cable connected to the DVI-to-VGA adapter (if necessary), and then connect to the MBP. So, the last connection is to the MBP, but everything is powered on. That way, the MBP autodetects the display.
Even if you don follow that procedure, connecting/disconnecting a cable from the DVI port would not do anything to your logic board.

Connecting external camcorder

Similar Messages

Maybe you are looking for