Connecting external NEC PA271W via Displayport cable to MBPr has sleep/wake issues

I am experiencing strange sleep/wake issues after connecting my NEC PA271W 27'' external monitor via a mini-displayport to displayport cable to my MBPr.
Waking up from sleep mode, the resolution of my monitor would be set to 1440x768 instead of the proper 2560x1440 and I always have to go to system settings to get it right.
NEC claims this may be due to cable issues and Apple using a "wrong" mini displayport standard but I have tried 4 different cable manufacturers and this is just strange.
Anybody else experiencing similar issues?

I am experiencing strange sleep/wake issues after connecting my NEC PA271W 27'' external monitor via a mini-displayport to displayport cable to my MBPr.
Waking up from sleep mode, the resolution of my monitor would be set to 1440x768 instead of the proper 2560x1440 and I always have to go to system settings to get it right.
NEC claims this may be due to cable issues and Apple using a "wrong" mini displayport standard but I have tried 4 different cable manufacturers and this is just strange.
Anybody else experiencing similar issues?

Similar Messages

  • How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system prefer

    how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system preferences.  what else do I need to do?

    First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
    I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
    Matt

  • Macbook Pro suddenly will not connect to the internet via ethernet cable.

    I know this is a long shot... but I figured I would give it a try.
    My macbook pro suddenly does not connect to the internet via ethernet cable. Please bear with me, as I am not very tech-savvy - I will try my best to describe the symptoms!
    I connect to the internet via ethernet (we don't have wifi). It was working before I went to work, and when I came home I suddenly couldn't get anything to work (I know everyone says this, but I truly didn't mess with anything). Internet browsers just think for awhile and then turn up the 'You are not connected to the internet' error.
    I went into my network preferences and curiously, the 'Ethernet' shows a green dot and says 'connected'. However it says 'Authentication server is not responding' underneath the last part that says '802.1X: WPA: eduroam' (I think that is my user profile).
    When I go into my 'security' settings I can see that my firewall is off, so that shouldn't be causing any problems.
    I've tried restarting the router and computer itself many times. Diagnostics just gets to a certain point and reports back 'Network Diagnostics cannot fix the current networking problems.' I've also tried switching to a different ethernet cable, and I tried both cables out on a PC laptop and it connected without issue.  Additionally, I brought my macbook along to a friend's house and it connected to his wifi just fine, so the problem appears to just be with ethernet connections.
    I know it's hard to troubleshoot this kind of thing without being there and having a look at the computer yourself, but any tips wouild be greatly appreciated.

    As I mentioned above, I am not very tech savvy so I have no idea why a wireless protocol would be showing up there, I'm just listing everything I see in hopes that someone might know something I can try. This is why I am asking for help here - I'm not sure what has happened that has made me unable to connect, especially since it seemingly occured while nobody was using the computer.
    I guess I should clarify that I'm not a total hillbilly- normally my firewall is set to 'on', but I set it to 'off' to try and troubleshoot the issues here as I was told that sometimes it can interfere with the computer's ability to connect to the internet. If this is not the case and firewall does not affect anything, I will turn it back on while I try to fix this.
    I have tried the method you mentioned above a few times - I actually contacted my ISP earlier this week and they recommended resetting the router like that. They didn't mention any known network issues.

  • Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    If you just reboot it, does the problem go away?

  • I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

    I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

    Not without a player..
    The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
    There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
    A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
    Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
    You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video.

  • I want to connect a usb drive via adapter cable to...

    I want to connect a usb drive via adapter cable to my nokia C2-01.is this phone support usb otg feature as in nokia x2-00?if not then please recomend a method to connect a usb drive to this phone..
    Solved!
    Go to Solution.

    Hi mate,
    Sadly the Nokia C2-01 does not support USB OTG functionality. There is no method AT ALL to connect a USB device to this phone in the way that you have stated. If you require storage then instead of a USB drive you can use a microSD card up to 32GB, as the phone supports it.

  • Can I use AirPlay from my PC to my AppleTV when connected to an AirPort via LAN cable?

    Well as stated above I'm wondering if I can use AirPlay from my PC to my AppleTV when my PC is connected via LAN cable to an AirPort.
    I'm asking because usually your PC has to be on the same Wifi as your other Apple device, so AirPlay can function, and id love the ability to Stream via AirPlay but still be connected to the internet via LAN cable.
    Thanks in advance for any help!

    AirPlay is not restricted to wireless only. It can also work over Ethernet. Basically as long as there is a connection (on the same subnet) between the iTunes host and the AirPlay "speaker" streaming should take place without any issues.
    FWIW, My Win8 PC is connected to a Time Capsule via Ethernet. In turn my Apple TV is connected to the TC's wireless network. I have no trouble streaming from the PC to the Apple TV in this configuration.

  • I have att u verse modem and it wifi was not working. So i got netgear wifi an d i connected my apple tv via ethernet cable to att uverse modem . i did not want slow dowm my wi fi speed. Now airplay is not working .

    i have att u verse modem and it wi fi was not working. So i got net gear wi fi  and connected to att modem .  i connected my apple TV via Ethernet cable to att uverse modem . i did not want slow down my wi fi speed.  My Apple phone is on Netgear wifi .Now airplay is not working .

    Make sure that the Att Modem goes to the netgear router via ethernet cable. Then connect your Apple Tv with a ethernet cable to the back of the net gear router. Airplay wants it to both be connected to the same device, usually.

  • MacPro3,1 + Radeon HD 5870 + NEC PA271W-BK + DisplayPort

    Hello all,
    As metioned in the subject line, I have the following system configuration:
    2008 Mac Pro ( MacPro3,1 ) : 2 x 3.2 Ghz Quad core
    ATI Radeon HD 5870
    2 NEC PA271W-BK Displays
    As many of you know, this ATI video card has 1 DVI-D out and 2 MDP outs. So, if you want to connect more than one display, you must use a MDP connector on the video card, or install another video card.
    I wanted to use this video card and connect to these NEC displays so that when it becomes supported in software ( I'm aware of the limited support in Photoshop CS5 ), I will have the capability of displaying 10 bpp output on my monitors. Because of this, installing another video card, or using a MDP to DVI-D adapter of some variety is not an option.
    I have one display connected via DVI-D, and the other connected via a MDP to DP cable I bought from Monoprice.com. With this configuration, I had the following issues:
    - With display plugged in to MDP, machine would not boot. No startup sound would be played, but the hard drives would spin up.
    - With display plugged in to MDP, machine would not wake from sleep. Hard drives would appear to spin up, but no image would be displayed on the monitor.
    I found that if I unplugged my MDP monitor, booted the machine ( or woke it from sleep ), and waited for the login screen to be displayed, then I could plug in the MDP monitor and it would work. So what did I do? I crawled underneath my desk every morning, unplugged the MDP cable, woke my machine up, and then plugged the MDP cable back in. I did this for a month.
    Apple support said that they couldn't help me, because the Radeon HD 5870 is not officially supported on MacPro3,1; it's only supported on MacPro4,1 and newer.
    Of course, I searched extensively on the internet for a solution, and there were some that seemed to work and others that didn't. NEC also published a document that said that these errors occurred with certain types of aftermarket MDP to DP cables, but the one they recommended, the Monoprice.com MDP to DP 6 foot, was the one that I had!
    Here are two Apple support discussions on the subject which have been archived:
    https://discussions.apple.com/thread/2587838?start=0&tstart=0
    https://discussions.apple.com/thread/2583903?threadID=2583903
    On a whim today, I went to Fry's and bought a new MDP to DP cable, based on a hunch that my issues may be related to a faulty cable.
    It totally was the cable, and my setup works with no problems after I swapped the old cable out.
    I wanted to share my solution with others as this can be frustrating. The cable I bought was a Monster Cable Digital Life 8 foot MDP to DP cable. Normally I think that Monster Cables are a complete waste of money ( this one was almost $100 with tax ), and this is NOT a plug for Monster Cables, but with this configuration and the Monster MDP to DP cable I was able to get everything to work.
    Hope this helps for anyone who is out there banging their head against a wall.
    -n

    nedwilson-
    The DVI port on your card is a Dual-Link DVI-I, which is suitable for higher than 1920 wide, and also contains the VGA signals directly in the bar and four surrounding pins at one end of the DVI connector.
    A great deal has been learned since you reported your first problem some months ago.
    ATI has made a list of approved adapters available:
    http://support.amd.com/us/eyefinity/Pages/eyefinity-dongles.aspx
    DisplayPort, and its Mini variant, are not just a different-shaped DVI port. They are a completely different protocol with a packet interface.
    Some early DisplayPort adapters simply do not work:
    TS3533- Apple computers: Black screen or unresponsive Mini DisplayPort display after sleep

  • Why doesn't my pc connect to apple ipad via USB cable

    Connected my ipad to my pc via USB cable. Pc does not. Connect with it.  under Computer device does not appear.  My other external devices are ok though it recognises them ok I e external hard drive
    What can I co to find out fault.   It worked once before when I copied photos across from ipad to pc ok

    If the iPad does not show up in My Computer when you first connect it (and also open the Windows "what do you want to do with this drive" box)  then unplug the USB cable, wait 10 secs, then plug it back in.
    If you don't hear the Windows "ker-plunk" sound then the drivers are not loading and you need to uninstall and re-install iTunes. The drivers that allow your computer to see the iPad are NOT built into Windows, they come with iTunes.  Uninstall iTunes, go to the website and download and install the latest version.

  • Connecting to Airport Express via Ethernet Cable

    Dear Apple Support Community,
    My setup at home is such that all my devices are in such close proximity to the Airport Express, and therefore I connect everything to the Airport Express via ethernet cables (NAS, Apple TV, PS 3).
    The final step in my network setup would be to connect my Macbook to the Airport Express to connect to the internet using the Ethernet Cables, instead of using the wireless connection - because my Macbook is positioned right next to the Airport Express.
    However, I am struggling to get the Macbook to connect to the Internet via the Ethernet Cable through the airport express. Is there a special way to set this up if this can be done. I know Wireless would be the answer, but the problem is, when I download movies etc, I write the files directly onto the NAS which happens a lot quicker than doing so via WiFi.
    I hope the above question makes sense.
    Thanks in advance for any feedback.
    Regards
    ST

    Hello Brian Hunt1. Welcome to the Apple Discussions!
    I have an old PowerBook G3 and I do not have a wireless card for it. My plan was to connect it, via Ethernet cable to my airport express which is on my home wireless network (DSL to Mac Mini to AirPort Express via built-in AirPort).
    Unfortunately, the network configuration your describing, where you would use OS X's Internet Sharing feature to share the Mac Mini's wired Internet connection wirelessly with the AirPort Express Base Station (AX), won't work.
    If I cannot connect my laptop this way, could anyone suggest a wireless card that is compatible with this slightly antiquated, yet very useful machine?
    Only the "Pismo" PowerBook G3 is capable of using the original AirPort card. If you have this model, then the following DIY instructions will show you how to install it.
    If this isn't your model, then check out the following vendor offerings:
    o QuickerTek
    o hField Technologies' Wi-Fire

  • Connectivity of Nokia 6020 Via Data cable

    I'm having a teething problem to connect my handset Nokia 6020 via data cable.I can't get a right cable.can anyone assist me on this?
    Regards
    ken

    Hi roki
    I think you need a CA-42 cable. All drivers can be found:
    http://www.nokia.co.uk/A4144937
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • How can I print an email that is on my iphone directly to the Acrobat PDF maker on my laptop if the iphone is connected to the computer via data cable?

    How can I print an email that is on my iphone DIRECTLY to the Adobe Acrobat PDF maker on my laptop if the phone is connected to said laptop via the data cable?

    Looks like I'm SOL since I don't have an HP printer.  Would never own one, the consumables are too **** expensve.  Thanks all

  • My brand new Xperia Z2 won't connect to the PC via USB cable.

    My PC is running XP 64bit OS, my old Xperia U connects fine through the same USB cable and my Xperia Z2  recognizes flash drives connected to it via the supplied adaptor cable... Any ideas guys? does the phone perhaps not like my old version of windows?

    Hi Jake, thanks for the response.I gave your suggestions a go and found that restarting the PC with the phone already connected via USB caused the phone to briefly flash up "connected to computer" in the notifications bar.This occured immediately on start-up of the PC, during motherboard Bios, and dissapeared as soon as windows began to boot up. Upon windows starting, no mention of the phone is found anywhere under "my computer", device manager or in the task bar... More on the issue...the very first time i connected the phone to the PC, the computer was already running. The phone immediately asked me if i wanted to install PC Companion 2.1. Following the installation, the connection just went and hasn't come back since. I have noticed that PC Companion will not start on my PC. I've tried re-installing it several times from Sony website but when i try to run it I just get an hourglass for 5-10 seconds, then nothing. checking back through the system requirements for Pc Companion I've noticed that it asks for every OS except mine (XP 64bit)... could this be the problem with the software not running and perhaps the phone not being recognised?

  • Yoga2 Pro - how to use tablet as a projector connected with TV decoder via hdmi cable?

    Hi, My TV is broken and I would like to use my tablet as projector connected via HDMI cable from TV decoder to my tablet. What should I do? How to configure and which apllication I should use?

    You will need to choose the correct (Input) on the TV for the MacBook.....say your cable box is set to HDMI !.....and your MacBook is on HDMI 2.....you will need to select HDMI 2 from the TV's menu for the signal from the MacBook to show on the TV screen.......the selection choices are examples as I do not know exactly how you have things connected......

Maybe you are looking for

  • I have Windows XP 32 bit and can not get Adobe flash player to load!!! Do not know what version I ha

    I have Windows XP, 32 bit and can not get the flash player to load . Do not know what version I had to start with. When I try to load the 10.3 version it gets to 50% then tells me to close the Internet explorer and bartshel! If i do this then there i

  • Mobile Banking BOA...This is a Killer App!

    Man, I LOVE this one. *Mobile Banking*. My bank is Bank of America and I pay all bills through BOA Online Banking. What a great time saving feature. I also try and receive as MANY e-bills as I can. This is an email alert directly to you of a bill. So

  • Project plug-ins for adobe acrobat reader

    i have project plug-ins for adobe reader, but i dont know anything to that. i must complete in 2 mon anybody know, pls help me: 1. what soft for programming? 2. what language? 3. some Ebook Thanks verry much

  • IPad as a book reader

    My wife has had a stroke which affected her communications skills. I want to use an IPad to help her recovery. Can the IPad with proper apps show the pages of a book and provide audio of the page at the same time? I want to reassociate the written wo

  • Website doesnt work with anything but ie8

    Hello, im new to website production and i recently made a css/html website and uploaded it to a website via fttp. For some reason in dreamweaver i can preview the pages i have created perfectly in every browser (even the browser combatibility says no