Connecting externl display to iMac - Cable Suggestions?

I just picked up an old HP LP1965 with dual DVI inputs.  I have checked it using a VGA->DVI adapter into the monitor and the Apple Mini-DV->VGA into the iMac.  This seems silly to me to convert from digital out of the Mac to analog and then back to digital into the monitor.  Therefore, before I buy a VGA / DVI cable to remove one of the adapters, is there suggestion for a Mini-DV / DVI cable?  If there is no Mini-DV to DVI, then should I just buy the Mini-DV to DVI converter and a DVI cable so it does not need to go to analog?
The current cable I will purchase for my VGA /DVI is:
http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10209&cs_id=1020905 &p_id=5909&seq=1&format=2
Otherwise, for Mini-DV to DVI it will be:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041912 &p_id=4851&seq=1&format=2
and
http://www.monoprice.com/products/product.asp?c_id=102&cp_id=10209&cs_id=1020902 &p_id=2407&seq=1&format=1#largeimage
Thanks

You can split the display between 2 monitors by using this free software (not supported by Apple) http://www.rutemoeller.com/mp/ibook/ibook_e.html
I use it on my G5 iMac without problems. Not that this will split your video ram between the 2 monitors.
The iMac only has a VGA out. The only way I know to use a DVI monitor is to purchase a converter (check out Dr. Bott) - they are expensive, and I have no idea what the quality of the image would be.

Similar Messages

  • How to connect external display to iMac

    which port do I use to connect external display to my iMac ?

    Welcome to Apple Support Communities
    Depending on the iMac you have, you have different ports: Mini-DVI, Mini DisplayPort or Thunderbolt. Mini DisplayPort is available in 2009 and newer iMacs, and Thunderbolt is available in the Mid 2011 and Late 2012 iMac.
    You have to use one of those ports to connect an external display. You will probably have to look for an adapter, depending on the port the external screen has got

  • Problems connecting second display to imac

    I just bought a 2013 iMac 27". I have an NEC 27" monitor that I've connected to the iMac with a MiniDisplay cable. It doesn't seem to work. When I restart the computer, it doesn't detect the NEC. If I unplug the cable, and plug it back in, the NEC display will show up. But if the iMac goes to sleep, or I have to restart, the NEC isn't detected.
    Any ideas?

    I would test with another monitor to verify that it's not the monitor
    my dell using tb->dvi works 100% consistent from lion to mtn lion to maverick
    wife macbook pro worked from snow leopard to mtn lion with her minidisplayport to dvi

  • What cable do I need to connect my 27 inch iMac to my Cinema Display

    What cable do I need to connect my 27 inch iMac to my Cinema Display to have two displays?

    It depends on what type(s) of video input you have on your TV. If you've an open HDMI port on your TV, you can use a Thunderbolt (Mini DisplayPort) to HDMI adapter and it will carry the sound also. See -> here.
    Good luck,
    Clinton

  • Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    Hi, I want to use my Capsule just as a back up via wireless. How do I set this up without connecting it with an ethernet cable to either a router or the iMac??

    I misunderstood what Time Capsule is and had hoped for a wireless backup device that didn't have to be connected to the router.
    The TC is a wireless backup device.. it does not need to be connected to the main router..
    The problem is the computer.. not the TC.. the computer has only one wireless card.. if your current internet is by wireless.. then you must choose.. internet or backup.
    But my other suggestion will work.. get a wireless USB stick compatible with Mac OS.. there are plenty and cheap.. since you are in the same room as the TC they will work fine.. plug it in and load the driver.. taint hard.
    You should do the first backup by ethernet though.. wireless is too slow.. once you have that, you will do fine.
    Search ebay for wireless n usb.. Mac compatible..
    http://www.ebay.com/itm/New-EDUP-Mini-Wireless-11N-300M-USB-LAN-Card-WiFi-Adapte r-Nano-Card-Soft-AP-/150864362939?pt=US_USB_Wi_Fi_Adapters_Dongles&hash=item2320 377dbb#ht_3553wt_1165
    As you can see.. they are getting smaller and neater.
    I have no idea if it works .. haven't tried one.. but I have used USB wireless stick on the Mac to overcome this issue.
    You will need to set static IP .. not hard but you need to set specifics if you do buy one post again for the setup.

  • Can I get my laptop to connect via HDMI to mini display with iMac midi2011

    I want to use as display my iMac( 27" midi 2011), connecting it with laptop HDMI port

    http://support.apple.com/kb/HT3924#4

  • Is it possible to connect a MacBook Pro (prev model 2009, 2.26ghz) to an Apple Thunderbolt display:  will the cable fit?

    Is it possible to connect a MacBook Pro (prev model 2009, 2.26ghz) to an Apple Thunderbolt display:  will the cable fit?

    Sorry it won't work.  It will fit but the laptop can't communicate with it.  Please see many of the other threads here, specifically this one just above your post, that is discussing this exact question.
    Apple's specs for the ThunderBolt display state that it needs a ThunderBolt-enabled computer.  Your laptop has a mini-display port connection so it is not compatible with the new displays.

  • Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Have most recent macbook pro connected to thunderbolt via thunderbolt cable.  Occasionally when I close my laptop the thunderbolt display goes black and does not come back on---even in response to keyboard.  Help

    Hello QuinnDev,
    Thank you for posting in the Apple Support Communities.  It sounds like you are trying to use your MacBook Pro with a Thunderbolt Display in closed clamshell mode (MacBook Pro closed), but sometimes the display doesn't stay on.  I found an article that talks about closed clamshell mode.  You would have to fulfill the following requirements to use your display this way:
    Requirements for closed display mode:
    Power adapter
    External keyboard, mouse, or trackpad
    External display
    You can find all the steps and the full article here:
    Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
    http://support.apple.com/kb/HT3131
    I hope this helps!
    All the best,
    Sheila M.

  • No display when connect DVI-D dual link cable

    Hi
        I am using MS-6398 motherboard and I have the latest Bios 5.60.  when I connect DVI-D dual link cable from ATI All-In-Wonder 8500DV graphic card to my SONY SDM-M81 Flat Panel.  There is no display at all during POST as well as after boot up. It has display only if I connect with regular analog VGA cable.  I have contacted the ATI tech support and they ask me to contact the manufacturer of my motherboard because it don't have display during POST which is nothing to do with driver.
    thanks,
    Siong

    DVI-D port on the Ultradock is single link only.
    If you need DVI-D at dual link resolution (i.e. 2560x1600), you need an active displayport to dual link converter. Startech makes them, they should be around 80 USD or something of that region.
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Can I connect my thunderbolt display's power cable to supply power to the new retina display macbook pro?

    I'm planning to buy a new retina display macbook pro, but I have a thunderbolt display and I use the display's power cable to supply the power to a macbook air. As the power connector on the new macbook pro is differet, It looks to me that I won't be able to connect it to the new computer. I'm I correct?

    You'll just need this adapter, which you can buy or order with the computer:
    http://store.apple.com/us/product/MD504ZM/A?fnode=MTY1NDEwMQ&s=topSellers

  • Display port connect to pc using imac as display.

    hi guys i recently got the imac 27inch. i would like to know if i connect the display port from my pc to the imac, should i on the power for my imac too ?
    as i was told that imac can use as a external monitor as long and connected to a display port form macbook or pc ?
    Please help me thank you.

    Hi Bryan,
    have a look at these informations about the 'Target Display Mode' http://support.apple.com/kb/HT3924
    Be aware that to my knowledge there are still problems when using an ATI 5xxx graphics card in your PC as these still seem to be incompatible for the Target Display Mode.
    Regards
    Stefan

  • Problem with IPad , did an update as requested now it does nothing, but display a graphic that shows I should connect to ITunes . So I connect it to my IMac run ITunes nothing happens. Try restore pop up says not eligible for restore.

    Wow what a pile of crap you must wade through to ask a question .
    Ok so the problem is I did an update on my IPad and now it does nothing but show a graphic showing the power cable connecting to ITunes
    So  I connect iPad to my IMac and prompt iTunes nothing happens. So I try sinc nothing happens.
    So I try restore and the popup says I am not eligible for restore.
    What is going on with this stupid machine

    Machines are incapable of being stupid. Not so of their operators.
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Received apple tv as gift, my tv/home theater situation has no HDMI input capabilities.  My only option is an optical connection, please give me some inexpensive optical cable suggestions???

    Received apple tv as gift, my tv/home theater situation has no HDMI input capabilities.  My only option is an optical connection, please give me some inexpensive optical cable suggestions???

    Welcome to the Apple Community.
    HDMI is required to connect the Apple TV to a TV or through a receiver. The optical connection is for audio only.

  • Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable

    Can I connect MacMini 2009 to Thunderbolt Display with Adapter Cable (Mini Display to Thunderbolt Adapter)

    Sorry but no you can't.
    Only Macs with ThunderBolt ports can be used with the ThunderBolt Display and the 2009 Mac Mini doesn't have a ThunderBolt port.
    Which computers can I use with my Thunderbolt display?
    Stefan

  • Can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    can i run a printer off the ethernet cable connection without hurting the imac or is the ethernet slot only for internet connection?

    Hi, Alan -
    How can I connect to both printer (HP 4050n, via direct connection) and internet (via LAN), as my iMac has only one R45 port?
    You can, but you'll need to expand your cabling a bit.
    You'll need to get an intermediate ethernet hub, switch, or router. That device sits alone, with the Mac, your printer, and your modem/LAN plugged into it.
    If you are already using a router, either separate or in combination with the modem (many modems have a built-in router), then you just need a hub or switch.
    I use an ethernet switch (10/100/1000) to let both my Macs (a 2010 iMac and an elderly G4 DA model) use my HP4000n printer and my modem. The ethernet switch is a passive device, meaning there's no setup nor instructing it required - it's truly plug-and-play. All four items (two Macs, printer, and modem) are plugged into it via ethernet; both Macs have full-time independent access to the printer and the modem.

Maybe you are looking for

  • Client can not fill out my Form in Adobe Acrobat

    I created a form, I hve no issue opening it up and filling it out personally. My co worker can do the same. However, when sent to a client, they can not fill out some of the fields when opening the form in adobe. Why is this?

  • How to get information from edit box

    Hi, I have to modfy user-exit EXIT_SAPMM07M_004 For me necceassry is field GOHEAD-LFSNR but it is edit box and when customer fill this field i need to get the information from this field. There is question how to in module EXIT_SAPMM07M_004 I can rea

  • Install NetWeaver CE 7.1 on Windows Server 2003 32bit, Oracle database

    Hi, It is possible install NW CE 7.1 for Oracle on Windows Server 2003 32 bit ? I have installed NW 2004s on Windows Server 2003 platform, and I need install CE 7.1 and then ESR. I have downloaded CE and ESR 7.1 installs from "SAP Installations & Upg

  • How to create transport request with Transaction Code

    hi, i have made a Report and then i have transport it to QAS server but mistakenly i transport the request without T-Code. Now i want to make a new transport request with T-Code but can't understand where i can make this new request because when i go

  • Sharing documents with others users

    i have tried to set up folder/document sharing between users on my imac and followed the set instructions but when i go and log in as someone else i cannot see any of the shared folders etc.