Connecting FireBox via ExpressCard adapter

I have my guitar connected to a PreSonus Firebox and the FireBox connect to MBP via FW400 thru a Sonnet FW ExpressCard/34 adapter. When I insert the adapter, a box comes up sending me to System Preferences/Network. Underneath Airport and the other choices, I see PCI FW ExpressCard, but I get a red light and it says Not Connected. I'm getting a blue sync light in the FIreBox, but when I open GarageBand, no signal. Ideas? Thanks!

blufishmedia wrote:
Still can't hear my guitar in GB.
http://www.bulletsandbones.com/GB/GBFAQ.html#selectinterface
(Let the page FULLY load. The link to your answer is at the top of your screen)
and
http://www.bulletsandbones.com/GB/GBFAQ.html#monitoron
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

How can I connect my Ipad Air to my PC to see the Ipad screen on the PC? I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. Thanks

How can I connect my Ipad Air to my PC to see the Ipad screen on the PC?
I have connected them via the Ipad to a LIGHTNING DIGITAL AV ADAPTER-ZML connected to a APPLE HDMI TO HDMI CABLE (1.8 M)-ZML, and to the HDMI port on the PC. But now I don't know how to show the Ipad screen on the PC, as if it was a monitor / screen, so that I can then use Lync and share my PC screen with people virtually.
Thanks for any help! Regards

Hi Rob - thanks so much for your help! Could you tell me what "air sever or reflector apps." are? and where can I look for information about them?
Do you use them on the Ipad or on the PC?
Do I need a cable too and which one?
Sorry... I am not very technical as you can see, thanks for your help.
Regards

Is it possible to connect a USB pen drive to ipad 3 via and adapter?

Is it possible, via an adapter, to connect and access documents on a USB pen drive on an iPad3?

Technically, you can use the camera connection kit to attach certain USB drives to the iPad. That said, the ONLY thing your iPad will see are photos or movies that are named with 8 characters and located in a DCIM folder.
So technically you can attach a USB, however it does not work for documents, only photos or videos.
There are some wireless drives out there, the Seagate GoFlex and the iDrive and some others, but definitely with the Seagate it's often just that you can read from or pull from the drive, you can't put your document back onto the drive to get it off the iPad.

Connecting kurzweil sp88 to GB I want to connect my Kurzweil sp88 to GB. The Kurzweil has a baffling array of buttons and possible MIDI channels. It also has the old style MIDI plug ins. I've got the MIDI out connected to my MacBook Pro via USB adapter.

I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I should use? Also, should I leave the MIDI In cable out of the Kurzweil? Thanks for as detailed an answer as possible. If you like you can respond directly to me at [email protected]

First of all I do not own this keyboard. But a quick look at the manual (found on the internet) says that when first powered up the SP88 is in Internal Sounds mode. Meaning you hear the sounds selected when playing the keyboard. It also stated that the default Midi Transmit Channel is Midi Channel #1.
Looks like you would need to go to the SP88 Keyboard's MIDI SETUP and simply select LOCAL OFF. Now the keyboard should be ready to transmit Midi Out only and no internal sounds should be heard.
Next you may or may not need to do this but you might need to go into the Utilities Folder found in your Applications Folder on your Mac and double click AUDIO MIDI SETUP the keyboard Icon. Figure #1 below.
Next you need to make a physical connection from the Midi Out of the SP88 to the Midi In on your Midi Interface. Figure #3 below. You may need to Click on Add Device first. Figure #2 below.
In the examples shown below I have a Yamaha Electronic Drum Kit that is Midi Out only... not USB out. I had to plug a Midi cable from the Midi Out Port on the back of my Drum Module to the Midi In Port on the back of my Motu 828 Audio Inferface which is connected to my Mac. Next I created the Audio Interface and Drum Module "Devices" as mentioned above.
I then double clicked on the Drum Module and made my Midi Out Selections. Figure #4 Below. And once it was setup and the icons closed I used my mouse to draw a virtual cable connection from the Drum Module Out to the Audio Interface In. Figure #3 below. This is how I got my Midi Devices to talk to one another.
Once you have made your setup as I have outlined create a MIDI Instrument Track in Garageband, select an instrument for example a Piano then Record Enable that track in Garageband and see if you now hear what you are playing. In this example the SP88 is a Midi Controller only and you will only hear sounds selected in Garageband which is what you want.
Keep in midi your setup may be different than mine. You can keep your SP88 Keyboard on the default Midi Channel #1. That would be a good place to start. Garageband receives Midi on all channels.

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

Does the "new iPad" output better picture quality to an HDTV (via HDMI adapter) than the previous iPads? Or is it pretty much the same?

I'm currently using the iPad 2 to review photos and I also mirror it to an HDTV (via HDMI adapter). Does the "new iPad" output a better picture quality using the same connection method? This is mainly in reference to mirroring and not for watching movies/video.

Wundrbr3d-
I expect that video will be higher resolution since there is also a new HDMI adapter available for the iPad 3. I do not know if it is required for a lower resolution source, but probably is for higher resolution.
Fred

HT4644 How do I get an image on a Samsung TV via HDMI adapter and cable. Currently get only a static imgae of desktop and gray grainy screen for everything else.

How do get an image on a Samsung HD TV via HDMI adapter and cable?
Currently get a static image of the desktop and then a grainy gray picture.

If it's like mine, I used another post's advice. Go to system preferences, then display and click on "mirror". Then in system preferences go to sound and click on "HDMI". I did this while I was connected to my Samsung TV and it worked then.

Lion 10.7 - Proper driver for Dynex eSATA Expresscard adapter?

I just upgraded to OS X Lion today, and I'm having trouble talking to my external drive with my eSATA expresscard adapter. (see link below)
http://reviews.bestbuy.com/3545/8682393/dynex-2-port-esata-ii-expresscard-adapte r-reviews/reviews.htm
The adapter is detected as a "Mass Storage Controller," but I can't get any connectivity with my external drive. Has anyone had success with this/any expresscard adapter? Back to good ol' USB 2.0 for the time being I guess...
Thanks in advance!

I can confirm that this driver (SLI 3132 ver. 1.2.5.0) is working for my Dynex 2 port e-SATA II ExpressCard Adapter.
(Link to Mac specific driver page)
I haven't done any super heavy lifting with it yet, but so far so good.
Will report back if I see any issues over the next couple days of use.

MBP freezes / hangs when connecting LCD via DisplayPort

Time and time again, my new unibody MBP freezes, when i connect my LCD TV via displayport adapter plus dvi>hdmi cable.
The same setup worked flawlessly with my old MBP back in the days and 80% of the time it also works on my new mbp.... but sometimes, upon connecting the cable to the MBP the screen just locks up. the music keeps playing, thekeyboard light stays on but nothing moves on the screen. i have to switch the mbp off and on again, which to me doesnt feel very comfortable....
anybody else with those problems?

Just wanted to chime in to say that I have the same problem:
MacBook Unibody with Backlit Keyboard
Mini DisplayPort to DVI-D adapter
SyncMaster 243T 24" LCD
Every 3-4 times, when plugging or unplugging my MacBook to or from the adapter, the screen freezes and I have to hard reboot.
Any solutions? Rebuilding permissions, zapping PRAM/NVRAM, resetting the SMC, etc., do not help, of course.

Need help to Configure FTPS connection for File Sender Adapter

Hi,
I want to Configure, FTPS connection (Secured Connection) for File Sender Adapter. Could anyone please guide me, what Information I require to configure. I just want to know what Information should I request the team inorder the configure FTPS so that it can be deployed properly.
I have checked with [SAP Help Link|http://help.sap.com/saphelp_nw04/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm] and while configuring the communication channel found that I need Keystore and the X.509 Certificate and Private Key. which needs to be deployed on the J2EE server by using the Visual Administrator.
Is there anything else, I need to configure.
Any help would be appreciated in this regard.
Thanks & Regards,
Varun.K

The basic things are Certificate/Keys which you already know. Usually it is enough for running a sceanrio.
However, if you have additional requirements, like FTPS for "Connection Security" for encryption, then you may need additional details like commands. Rest all settings are same as FTP.
Regards,
Prateek

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device?

My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device? A message from windows says: the device has malfunctioned.

Try TS1363: iPod: Appears in Windows but not in iTunes.
See also Corrupt iPod classic.
tt2

HT1937 My iphone 4S isn't recognized by itunes when i connect it via usb...it won't sync. Help?

My Iphone 4S isn't recognized by itunes when i connect it via usb...it won't sync.

iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

How to Send Appointment via mail adapter

Hi Guys,
     I need to send the appointment and vTodo via mail adapter, any way i need to develop a mail adapter module. Till now i have finished this part,and i can send normal mail even normal mail with attachment. But i don't know how to send appointment via mail adapter.
This is payload content of appointment which got from Exchange server to gmail:
_=_NextPart_001_01C71EC0.97A011C6
Content-Type: text/plain;
    charset="GB2312"
Content-Transfer-Encoding: quoted-printable
When: 2007=C4=EA6=D4=C227=C8=D5=D0=C7=C6=DA=C8=FD 3:30 =CF=C2=CE=E7-4:00 = =CF=C2=CE=E7 (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi.
Where: China
~*~*~**
This is calendar content
_=_NextPart_001_01C71EC0.97A011C6
Content-class: urn:content-classes:calendarmessage
Content-Type: text/calendar;
    method=REQUEST;
    name="meeting.ics"
Content-Transfer-Encoding: 8bit
BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft CDO for Microsoft Exchange
VERSION:2.0
BEGIN:VTIMEZONE
TZID:(GMT+01.00) Sarajevo/Warsaw/Zagreb
X-MICROSOFT-CDO-TZID:21
BEGIN:STANDARD
DTSTART:20070112T140000
TZOFFSETFROM:+0100
TZOFFSETTO:+0100
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:20070112T140000
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DTSTAMP:20061213T141132Z
DTSTART;TZID="(GMT+01.00) Sarajevo/Warsaw/Zagreb":20070112T140000
SUMMARY:This is calendar test
UID:040000008200E00074C5B7101A82E0080000000030D51864C81EC701000000000000000
010000000CA9F127EA8947844BC4DD47F269BDEA9
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Xu, Rocky":MAILTO:rocky@***.com
ORGANIZER;CN="Xu":MAILTO:rocky@**.com;roc*@gmail.com
LOCATION:Shanghai
DTEND;TZID="(GMT+01.00) Sarajevo/Warsaw/Zagreb":20070112T160000
DESCRIPTION:This is calendar content\N
SEQUENCE:0
PRIORITY:5
CLASS:
CREATED:20061213T141132Z
LAST-MODIFIED:20061213T141133Z
STATUS:CONFIRMED
TRANSP:OPAQUE
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-INSTTYPE:0
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-CDO-IMPORTANCE:1
X-MICROSOFT-CDO-OWNERAPPTID:367904726
X-MICROSOFT-CDO-APPT-SEQUENCE:0
X-MICROSOFT-CDO-ATTENDEE-CRITICAL-CHANGE:20061213T141132Z
X-MICROSOFT-CDO-OWNER-CRITICAL-CHANGE:20061213T141132Z
END:VEVENT
END:VCALENDAR
_=_NextPart_001_01C71EC0.97A011C6--
My question is
1. How to generate this kind of payload in mail adapter module?
2. It is possible to send appointment via mail adapter?
Following i can get from other system, even using mail package check or not using mail package check.
BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft CDO for Microsoft Exchange
VERSION:2.0
BEGIN:VTIMEZONE
TZID:(GMT+08.00) Kuala Lumpur/Singapore
X-MICROSOFT-CDO-TZID:21
BEGIN:STANDARD
DTSTART:16010101T000000
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:16010101T000000
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DTSTAMP:20070608T025852Z
DTSTART;TZID="(GMT+08.00) Kuala Lumpur/Singapore":20070608T110000
SUMMARY:This is meeting request with attachment
UID:040000008200E00074C5B7101A82E0080000000000A9BD0BA7A9C701000000000000000
010000000C5E16D144D1612498C0EF7E2115EFEC4
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Xu, Rocky
":MAILTO:roc*@**
ORGANIZER;CN="Xu,y":MAILTO:roc*@**
LOCATION:India labs
DTEND;TZID="(GMT+08.00) Kuala Lumpur/Singapore":20070608T113000
DESCRIPTION:This is content! <<shanghai.txt>> \N
SEQUENCE:0
PRIORITY:5
CLASS:
CREATED:20070608T025925Z
LAST-MODIFIED:20070618T033505Z
STATUS:CONFIRMED
TRANSP:OPAQUE
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-INSTTYPE:0
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-CDO-IMPORTANCE:1
ATTACH:CID:008501c7b159$a9d41d3b$_CDOEX
X-MICROSOFT-CDO-OWNERAPPTID:1468557271
X-MICROSOFT-CDO-APPT-SEQUENCE:0
X-MICROSOFT-CDO-ATTENDEE-CRITICAL-CHANGE:20070608T025852Z
X-MICROSOFT-CDO-OWNER-CRITICAL-CHANGE:20070608T025852Z
END:VEVENT
END:VCALENDAR
Thanks & regards
Rocky

Hi
have a look at this
You can use Java/ABAP proxies to do this job for you..
Java Proxy >> will read the mail(with the attachments) with the help of Java APIs and send the message into XI ABAP Proxy >> for this you will have to first convert the attachment into a message and then you can proceed in the regular fashion.
Not all adapters can process attachments, I'm not sure why you are having trouble with using module processor in the mail adapter. Just check if the service pack that you are using supports this feature.
If you are on WAS 6.10 and above you can achieve this and there is an excellent weblog by Thomas Jung on this topic at
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
reading Pdf Through mail easly done with Java Proxy, which will read the mail(with the attachments) with Java APIs and send the message into XI and then map with the Target ABAP proxy structure .
Thanks

External drive connected to FW800 ExpressCard - bootable?

I have a 2.0 GHz Core [1] Duo MacBook Pro with no built-in Firewire 800, and wish to use an external boot drive at faster-than-FW400 speeds. Trying eSATA seems to be an endless nightmare right now, but what about FW800? If I connected a FireWire 800 ExpressCard, could I connect my external boot drive to that?
The card I was looking at is the Apiotek EC-0002B, but I have no problem using a different brand if that card is not bootable and another is. The drive enclosure would be one of the quad-format SATA boxes from OWC.

Hmm. Well, Apiotek is an unreachable Taiwanese company, Apple seems to think that an ExpressCard that requires no drivers would be bootable, and OWC thinks no ExpressCard is bootable. And I don't really feel like dropping $70 shipped/taxed on an experiment.
Is there anybody on this forum who's tried booting a MacBook Pro from a drive connected through some ExpressCard interface? There has to be someone. It seems like such a straightforward thing to try, but a forum search for "expresscard AND bootable" suggests otherwise. Odd.
This makes me pine for my dear departed G4. If I wanted to add a new, fully functional interface, I slapped in a card. Ah, the days when expandable Macs didn't start at $2500.
Sonnet sells a FW800 card that looks to be the same card with their branding on it. Maybe I'll call them on Monday.

Late Macbook Pro 2011 won't charge via MagSafe adapter.

My friends Macbook Pro 2011 same as mine wont charge the battery via MagSafe adapter. The battery is good and the adapter also, ive checked them on my Mac. The problem is that on her Mac it won't charge. I've change the MagSafe adapter on her computer and it didn't work still no charge, no green light on the L shaped adapter. Can it be the Logic Board?

Resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

Connecting FireBox via ExpressCard adapter

Similar Messages

Maybe you are looking for