Connecting FP1601 Fieldpoint ethernet controller with Laptop computer

Dear All,
I was using FP1601 ethernet module along with other DAQ modules with my desktop PCs (Connection using Crossover cable), they worked fine, but when I try to use the FP1601 with laptop computers (using crossover cable) the ethernet port is not blinking also the Link LED in FP1601 is dead too. I tried this with two laptops HP and Compaq, both running Windows XP, I also did checked the ethernet ports of the laptops with LAN link and with other PCs the ethernet adaptor is working fine.
The problem is only when connecting FP1601 with laptop through crossover cable. Am I doing any mistakes, I donot know,
Please If anyone could able to help me out, I shall be grate full, since I have to undertake an assignment to measure data in vehicle, where obviously I could not carry a PC.
Thanks in advance.
Hameed Faizul, Scientist CVRDE, DRDO India

I donot Know, whether I had solved the exact nature of the problem, But I found a way out.
Instead of using crossover cable between laptop and the FP 1601, I used a straight cable and incuded a network switch in between,
This had solved my issue..

Similar Messages

I have problem to connect the I-pad 2 with my computer. I-tunes does not synocronize my IPad

I have problem to connect the I-pad 2 with my computer. I-tunes does not synocronize my IPad

lewis137 wrote:
it dossent matter now ill just reformat my computer
If you like

LAN connection not working/Ethernet controller driver missing

I got a new hard drive and installed a clean copy of windows 7 on it. After dealing with a few problems I finally had it up and running. I transferred via usb and installed drivers from http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-500-Desktop-PC-series/7779690/model/8154137#Z7_3054ICK0KGTE30AQO5O3KA30R1. Every thing is working except for my LAN connection. I can connect to wifi however. In device manager I have a ! next to ethernet controller. Had ! on a bunch more before installing other drivers. In network adapter settings there is no listed Local Area Connection. What do I need to get my Lan connection working again?

Hi: The support page for your model indicates you need this ethernet driver... This package provides the Realtek PCIe GBE Family Controller Driver for supported models running a supported operating system. File name: sp71102.exe You have to manually install this driver. Run the file and then go to the device manager. Click on the ethernet controller needing drivers. Click on the driver tab. Click on Update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder should be located in C:\SWSetup\sp71102. Make sure the Include Subfolders box is checked, and the driver should install.

How to use Blackberry Bold to connect to the internet with laptop computer

Hi, I just switched from an HTC smartphone to the Bold, with the HTC I had an application called internet connection sharing and with a few mouseclick I could use the cellphone's mobile interent connection on my laptop. I use this to have full interent access with my notebook whne there is no wlan etc. for example in a car and it works very good.
I can't find a way to do the same thing on the Bold, any idea on how to do this? Thnak you!

http://www.blackberryfaq.com/index.php/Using_BlackBerry_As_Modem
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Problems connecting DeskJet 2542 printer to my laptop computer

I recently bought an HP DeskJet 2542 printer to replace my broken one.
Everything went well on the installation up to the point where I attempt to connect my printer to my laptop, which has been frustratenly unsuccessful.
I have tried both wirelessly through the network and wired through a USB connection, but neither work.
Upon further investigation, I find that the 2540 series software driver for the connection between PC and printer isn't even installing, despite several attempts.
I have repeatedly uninstalled and reinstalled the entire printer software, but even when it says that the installation is completed, it still fails to connect the printer to my computer.
Furthermore....I recently discovered that my laptop printer connection runs through Windows' "WSD Print Device", which has been prompting me via Windows Update for a software update....but everytime I run it, it fails due to a "300073EB" error.
My laptop is an Dell Inspiron N5040 running Windows 7 - 64 bit. Only changes I have made is to double the RAM memory from 4 GB to 8 GB by adding an additional memory chip.
Any help would be greatly appreciated before I simply return the printer back.
This question was solved.
View Solution.

Well....I am happy to report that I have finally got my printer installed correctly, and it is working properly.
It turns out that the problem was a corrupted register key in the Registry folders where my printer drivers are stored was blocking the installation. I had to delete all the register keys in the folder where they were stored, then rename the folder in my spool folder where the relevant driver files were stored to "deactivate" it.
For those interested: here are the relevant steps I took:
1) Obvously, back up your registry first just in case.
2) Temporarily disable the Print Spooler service through the Services tool in Adminstrative Tools (click on the "Stop" button after right-clicking on the Print Spooler listing, then clicking "Properties".)
3) Open Registry Editor (by typing "regedit" on your Start searchbar), then right-clicking on "regedit.exe" to log in as Administrator.
4) Using the left side nested folder directory, scroll down to this folder in the Registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows x64\Drivers\Version-3
(For 32-bit Win 7 machines, replace "Windows x64" with "Windows NT x86".)
Look for the subfolder underneath where the corrupted driver is located (in my case, "HP Deskjet 2540 series") and right-click and delete it. (Note: you could also do the same to all the other driver folders listed there, but you would still have to reinstall the services after you reboot. That's why you need that backup.)
5) Next, get out of the Registry Editor and, using Windows Explorer: locate this folder in your root (C:\) directory:
C:\Windows\System32\spool\drivers\x64\3
(This assumes you're using Win 7-64 bit; for 32 bit, replace "x64" with "W32X86".)
Rename the folder marked as "3" to "3.old".
6) Now, go back and restart the Print Spooler by using the same procedure as 1), except clicking on the "Start" button. (If your Print Spooler is set on "Automatic", though, you could skip that process, since rebooting will restart it automatically.)
7) Finally, reboot, and reinstall your printer software either using the attached CD or directly from the HP website.
It may simply be that an earlier install of a previous printer corrupted the keys enough that it was blocking the installation.
Justice and resolution may grind slow, but with a little investigation, it ultimately does grind. Thanks for your help....and you may consider this to be "SOLVED".

Does anyone have experience with laptop/computer tracking software?

Hi all,
I travel a bit for work, and the last software I bought for this purpose turned out to be completely useless.
The laptop is "located" usually nowhere near where my computer actually is, in fact I can't remember the last time the location was correct.
In the past 11 months my laptop was "located" in South Carolina when I was actually in New Orleans, Colorado when I'm in Wisconsin, and Eau Claire, Wisconsin when I'm in Madison, WI.
What use is a computer tracking app if it can't get the computer's location right?
I've heard about Project Prey, or Prey software--does anyone have any experience/feedback with this tracking software?
BTW, the tracking software I last used is MacPhoneHome--avoid at all costs.
Whenever I tried to contact them to try and figure out the issues I'm having, my correspondence was ignored until the fourth or fifth attempt, and when they did respond to me it took weeks for a response, and the response was always a very unhelpful, unsatisfactory answer.
And after all the time and frustration (and expense) of dealing with MPH, the software still doesn't work correctly.
Take care,
Brian

The OS X app is called Find My Mac. All you need to do to enable it is
go to System Preferences > iCloud and check Find My Mac.
You can then track it (and your other registered Apple devices) using iCloud.com.
I highly recommend it. It has features to disable itself or wipe itself clean if lost or stolen.

I can't connect my epson xp-410 with my computer

My computer is not connecting with my epson xp-410 printer

Hello jctc5,
I apologize, I'm a bit unclear on your exact configuration (OS X version, how connected, etc). If you are having issues with your printer, you may find the general printer troubleshooting steps outlined in the following article helpful:
Troubleshooting printer issues in OS X - Apple Support
Sincerely,
- Brenden

I cant connect to my cisco router with a computer using wireless...

When ever i try and connect to my wireless router is says, "This network is marked as Hidden and is either out of range or this computers settings dont match the router".
This is driving me crazy i just want to use my internet...
Please help me, ye i know how to get into my router setting using the default gateway i just need to know what to change...

Log on to your router and go to wireless. Enable ssid. If it is showing Linksys, change it to something else. Now click on Wireless security and write down all the settings. Make sure they match the ones in your computer under wireless connections.
Greetings from Northern Ontario, Canada

Just received by I Pad and it will not connect to ITunes or sync with my computer and it wasn't recognized by my MAc.

I just received my IPad and it will not sync with ITunes and my Mac doesn't recognize it any form. The screen is black with the exception of the annoying ITunes/USB cable graphic on the screen which appears momentarily and then disappears. Any ideas?

Things you can try first off,
is make sure you plug in your USB at the back of the mac, rather than for example keyboard.
Check out another usb cable.
Hold down sleep/wake and home button at the same time to reset iPad.
Make sure you have the latest iTunes installed or you may have to reinstall iTunes.
None of these work then I suggest you to take it to an Apple retail store for the genius guy to check it out.

Can I use the Ethernet Port for a computer when it is also used as a wireless network with an Airport Extreme as the access point for the wireless network

Can I use the Ethernet Port of the A1264 Airport Express to connect to the Ethernet port of a computer that does not have wireless capability when the Airport Express is also used on a wireless network with an Airport Extreme 5th generation as the access point for the network?
I have AE 5th gen
looking to buy (from ebay) the AEX A1264
Various computers, printers and hubs for the network
Is this possible to do?

Bob, Thanks for the info. I have read different articles that said yes, but I wanted to make sure before I commit to buy. I have an older A1084 which I could not use the Ethernet port. I know at one point I was able to when I was on 10.4. Now that I am on an Intel processor and 10.8 I am going to have to upgrade some of my Apple wireless hardware.
Thanks Again.

Ethernet Controller - Driver not installed - Compaq Presario

Hello, I am new here so be gentle
I have just bought second hand a Compaq Presario 6240EA, motherboard is a Compaq 07D0h.
In the hardware - device manager, it shows 'Other devices' - Ethernet Controller, with a large yellow question mark and exclamation mark.
Details in properties show the following: drivers for this device are not installed (Code 28)
PCI\VEN_10DE&DEV_01C3&SUBSYS_00A80E11&REV_C2\3&13C0B0C5&0&20
I have search the HP and Compaq websites for driver downloads and have downloaded all the nVidia drivers available on the Compaq site, none of which improve the situation.
Would there be somewhere else to look, I am at my wits end with this, any help would be much appreciated.
Thank you in anticipation.
This question was solved.
View Solution.

Please start your own thread rather than opening old ones back up. Also provide your full model number particularly when asking about hardware function which may involve drivers. We have to know precisely what hardware we are dealing with. Like the posts above, you may want to include the hardware id of the affected device.

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.

Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

Cannot connect to the internet with laptop

Background: Started out with iMac connected to Apple Airport Extreme base station via wireless that is connected to broadband/cable linksys modem befcmu10. Then setup Apple Macbook 13" to access internet through Apple Airport Extreme base station via wireless. Worked fine, spectacular. Then setup HP Photosmart C6180 All-in-One printer to be accessed through Apple Airport Extreme base station. Again, worked flawlessly. Then setup and "installed" an offline internet Skype phone [Philips VOIP8411B/37] so I could use it's services and not need a computer to be on. It's connected to the Apple Airport Extreme via Ethernet. To get it up and running, I had to reboot my modem and router. Right after I got it up and running I noticed that the Skype phone was working and the iMac was working but the laptop was now not able to connect to the internet.
Present: Finally able to get back to finding a solution, I was trying to look at settings in the network system preferences and researching things to try. Also going to the Airport Utility program trying different things like having it distribute IP address and having it find DNS servers automatically, etc etc etc. Nothing was working to get the Macbook back online. So I rebooted the modem and router again [because i have been experiencing problems with cable company] just for the heck of it. Wa-la, the iMac and laptop were now both using the internet. But before I realized what was happening, the Skype phone was not able to establish a connection. So before I stopped for the night, I shut everything down and rebooted the cable modem and router.
Next morning I awoke and the Skype was working but the iMac and Macbook weren't able to connect. After trying to fiddle with System Preferences and Airport Utility I resorted to reboot the modem and router. iMac worked, Macbook didn't, Skype worked. After a full day of researching, reading and fiddling with preferences on the macs end, I decided to try the reboot of modem and router. Got iMac online, Macbook online, Skype not.
Discovered problem: Apparently only two of the three devices can connect to the "internet" through the Aiport Extreme base station at a time. So right now, I have to sacrifice one device not to connect to the internet. It's the Macbook for now. From what i can see, the use of the printer is not affected [but it's only setup on the iMac].
I've gone into the network diagnostics on the Macbook and under Network Status on the left, Airport, Airport Settings, Network Settings, and ISP are all green, while Internet and Server are yellow for a second while it searches but turn red and stay red. Contacted cable company and everything is good on their end and they couldn't help further. Something is wrong on my end. Now on to apple care or forum help.
Does anyone have a solution or suggestion of what to do or where to look? Do I have to change something in the Apple Airport Extreme base station? Network setting? Any help would be much appreciated, it's frustrating and time consuming and I'd like to get it all up and running.
Thank you for your time.
BCSlck1

I don't have an answer, but I experienced the same problems trying to set up an airport express to route traffic to my stereo.
Apple Extreme router, iMac and laptop all worked just fine for months, upon installing Airport Express (step by step, according to instructions), all **** broke loose. Airport Utility was unable to see my Airport Extreme router, after hours of rebooting computer, cable modem, router, and finally a hard reset of the Airport Extreme router, it is finally recognized by Airport Utility again.
Recreated network, iMac connects to the internet just fine, laptop (Macbook Air) connects to the network just fine, but will not connect to the internet. Network diagnostics does not help, it gets to the "do you have a router? If so, reboot" stage, and never seems to see the router.
Any suggestions?

Slow Internet Connection Speeds caused by Ethernet Controller Driver

Problem: Internet connection speeds are 1/10 of available connection speed.
1. Problem statement is based on running speed tests at cnet, speedtest.net, and AT&T.
2. I am paying for 12 MBps down load speed but I only get about 1.5 MBps.
3. Other computers in household get 11+ MBps connected to the same ethernet cable and also different ethernet cables.
4. I traced the problem to the network controller driver.
5. I updated to the latest driver with no change in performance.
6. After some experimenting I found that if I re-install the driver after the computer is booted up, the internet connection down load speeds increase to 11+ MBpS (typically around 11.4 with maximum capability of 12)
I have assumed that the driver does not load properly the first time, but why? Or is there some other cause or setting that I have overlooked?
Board: MSI Z77A-G43
Bios: Version 2.0
Ethernet Controller: RealTek RTL8168B PCIe GBE Family Controller
Ethernet Controller Driver: 7.65.1025.2012
VGA: NVIDIA GeForce GTX 550 Ti
PSU: Raidmax RX630Z 630W
Intel Core i7-2700K Sandy Bridge 3.5GHz LGA 1155 95W
MEM: 4x4gb
HDD (Primary): Western Digital WD5000HHTZ-04N21V0 500MB
HDD (Secondary): Hitachi Deskstar HDS723020BLA642 2TB
OS: Windows 7 64bit Professional

Have you installed all of the most recent drivers:
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win7%2064
There is also an realtek firmware update included in the latest bios:
>>Beta BIOSes<<
2.8 is the latest official & there are two newer beta bios's there as well.

Connecting FP1601 Fieldpoint ethernet controller with Laptop computer

Similar Messages

Maybe you are looking for