Connecting from 10.4 to 10.5

Hi -
I have an old powerbook running 10.4.11 and have just installed 10.5.2 on my mirrored door G4 desktop system. They are both directly wired to a router however, I cannot connect from the laptop to the desktop. The connection works from 10.5 going to 10.4, I can login and browse the files without difficulty, however, it will not work the other way.
On the computer running 10.4 I can see the computer running 10.5 under the network, and hit 'connect', it looks like it is trying to connect using afp -
in fact the firewall on the 10.5 machine says "Allow AppleFileServer connecting from 192.168.0.100:52297 uid = 0 proto=6"
but the connection always times out with an error saying the 10.5 machine was not available.
Any help would be appreciated, I have checked all my sharing, firewall and network settings and cannot seem to figure it out. Prior to installing 10.5 it was working fine.

Hi Frankie
I have a similar arrangement with 10.4.11 on my eMac and 10.5.2 on my MBP and it all works fine. I have Airport connections to the router but it worked fine previously with one wired to the router.
Firstly I'm not terribly concerned about security so I don't have any non-standard firewall settings, etc.
I have the same user names & passwords on both machines - I'm less likely to get confused!
On the MBP I have chosen Allow access for all users in the sharing preferences and checked File Sharing.
I usually connect from the eMac hdd window by clicking on Network and continuing from there. I also let the computer remember my password for the authorisation (memory again!) I have no problems at all - either direction.
Two points: I'm aware that others sometimes have difficulties which can be hard to trace. At times it seems necessary to re-enter the same password as these things can become corrupted occasionally. I've even had the situation a few times where a password wasn't recognised until I restarted the computer - probably because some software component didn't load correctly.
It SHOULD work as Apple claims. If only this was always true!
Secondly, the 2 OS's are not the problem - they work well on the network and with each other. At the moment I can't think what else to suggest.
Neville

Similar Messages

HTTPs connection from SAP WebAS

Hello,
I have to establish a connection from SAP WebAS to an iSaSiLk server via HTTPS.
The iSaSiLk authentication is based on client certificates.
I've created a SSL client PSE, generated the Certificate Request, imported the certificate response and the chain of certificates associated with no errors. When testing the connection we're getting the following error message:
SAP icm log:
[Thr 1087400256] ->> SapSSLSessionInit(&sssl_hdl=0x2aaaba679980, role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT))
[Thr 1087400256] <<- SapSSLSessionInit()==SAP_O_K
[Thr 1087400256]      in: args = "role=1 (CLIENT), auth_type=3 (USE_CLIENT_CERT)"
[Thr 1087400256]     out: sssl_hdl = 0x1a3310c0
[Thr 1087400256] ->> SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)
[Thr 1087400256] NiIBlockMode: set blockmode for hdl 22 TRUE
[Thr 1087400256] <<- SapSSLSetNiHdl(sssl_hdl=0x1a3310c0, ni_hdl=22)==SAP_O_K
[Thr 1087400256] ->> SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0, &cred_name=0x1a49e4e0)
[Thr 1087400256]   SapISSLComposeFilename(): Filename = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] <<- SapSSLSetSessionCredential(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256]      in: cred_name = "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] ->> SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0, &hostname=0x1a4a09e0)
[Thr 1087400256] <<- SapSSLSetTargetHostname(sssl_hdl=0x1a3310c0)==SAP_O_K
[Thr 1087400256]      in: hostname = "<remoteServer_to_be_accessed>"
[Thr 1087400256] ->> SapSSLSessionStart(sssl_hdl=0x1a3310c0)
[Thr 1087400256]   SapISSLUseSessionCache(): Creating NEW session (0 cached)
[Thr 1087400256] Tue Jan 13 10:10:22 2009
*[Thr 1087400256] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL*
[Thr 1087400256]    session uses PSE file "/usr/sap/XID/DVEBMGS00/sec/SAPSSLSPHTID.pse"
[Thr 1087400256] SecudeSSL_SessionStart: SSL_connect() failed
secude_error 536871693 (0x2000030d) = "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite"
[Thr 1087400256] >>            Begin of Secude-SSL Errorstack            >>
[Thr 1087400256] ERROR in ssl3_get_certificate_request: (536871693/0x2000030d) none of the PSEs registered with hSsl can suffice
[Thr 1087400256] <<            End of Secude-SSL Errorstack
[Thr 1087400256]   SSL_get_state() returned 0x00002150 "SSLv3 read server certificate request A"
[Thr 1087400256]   No certificate request received from Server
[Thr 1087400256] <<- ERROR: SapSSLSessionStart(sssl_hdl=0x1a3310c0)==SSSLERR_SSL_CONNECT
[Thr 1087400256] ->> SapSSLErrorName(rc=-57)
[Thr 1087400256] <<- SapSSLErrorName()==SSSLERR_SSL_CONNECT
[Thr 1087400256] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-57): SSSLERR_SSL_CONNECT [icxxconn_mt
On the iSaSiLk server we're getting:
ssl_debug(2): Starting handshake (iSaSiLk 3.06)...
ssl_debug(2): Received v3 client_hello handshake message.
ssl_debug(2): Client requested SSL version 3.0, selecting version 3.0.
ssl_debug(2): Creating new session 11:5F:04:C9:0D:32:15:B9...
ssl_debug(2): CipherSuites supported by the client:
ssl_debug(2): SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): SSL_RSA_WITH_RC4_128_MD5
ssl_debug(2): SSL_RSA_WITH_3DES_EDE_CBC_SHA
ssl_debug(2): SSL_RSA_WITH_DES_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5
ssl_debug(2): SSL_RSA_EXPORT_WITH_RC4_40_MD5
ssl_debug(2): CompressionMethods supported by the client:
ssl_debug(2): NULL
ssl_debug(2): Sending server_hello handshake message.
ssl_debug(2): Selecting CipherSuite: SSL_RSA_WITH_RC4_128_SHA
ssl_debug(2): Selecting CompressionMethod: NULL
ssl_debug(2): Sending certificate handshake message with server certificate...
ssl_debug(2): Sending certificate_request handshake message...
ssl_debug(2): Sending server_hello_done handshake message...
ssl_debug(2): IOException while handshaking: Connection closed by remote host.
ssl_debug(2): Sending alert: Alert Fatal: handshake failure
ssl_debug(2): Shutting down SSL layer...
ssl_debug(2): Closing transport...
From the iSaSiLk everything seems to be OK, but on the SAP WebAS the error "none of the PSEs registered with hSsl can suffice the negotiated SSL cipher suite" is really unclear, since the cipher chosen by the iSaSiLk is one of the ciphers sent by SAP WebAS...
Can anyone give me any suggestion?

Hello Olivier,
Thanks for your answer.
I've implemented note 800240 which facilitates the PSE analysis by implementing the report ZSSF_TEST_PSE. With this report I'm able to check all the PSE content, which are:
Filename            SAPSSLSPHTID.pse
PIN                 <no>
Signature           X
Encryption          X
Profile Parameter
DIR_INSTANCE                   /usr/sap/XID/DVEBMGS00                       /usr/sap/XID/D00
sec/dsakeylengthdefault                                                     1024
sec/libsapsecu                 /usr/sap/XID/SYS/exe/run/libsapcrypto.so
sec/rsakeylengthdefault                                                     1024
ssf/name                       SAPSECULIB
ssf/ssf_md_alg                                                              SHA1
ssf/ssf_symencr_alg                                                         DES-CBC
ssf/ssfapi_lib                 /usr/sap/XID/SYS/exe/run/libsapcrypto.so
ssf2/name
ssf2/ssf_md_alg                                                             SHA1
ssf2/ssf_symencr_alg                                                        DES-CBC
ssf2/ssfapi_lib
ssf3/name
ssf3/ssf_md_alg                                                             SHA1
ssf3/ssf_symencr_alg                                                        DES-CBC
ssf3/ssfapi_lib
Environment variables
USER                xidadm
SECUDIR             /usr/sap/XID/DVEBMGS00/sec
PSE
Validity            18.12.2008 19:47:04   18.12.2009 19:47:04
Algorithm           RSA (OID 1.2.840.113549.1.1.1)
Test signature
Signature OK
Verification OK
Test encryption
Encryption OK
Decryption OK
As you can see, the cipher algorithm used is RSA. Any suggestion... ?
An iSaSiLk server "is a Java programming language implementation of the SSLv2 (client-side), SSLv3, TLS 1.0 and TLS 1.1 protocols. It supports all defined cipher suites (except for Fortezza), including all AES and PSK cipher suites. iSaSiLk implements all standard TLS extensions, comes with an easy to use API and operates on top of the IAIK-JCE Javau2122 Cryptography Extension. iSaSiLk is highly configurable and will work with any alternative JCE implementation supported by a proper provider for supplying the required cryptographic algorithms".
Once again thanks for your answer.

Cannot send email via ActiveSync when user connect from Internet (Exchange 2010 SP3 RU5)

Hi All.
This is the first time I encounter this kind of issue, whenever user connect from the internet they cannot send email from their Phone or Windows Mail App, but they can retrieve email
But when they connect from Internal Network they can send email. I already test ActiveSync from internet using www.testexchangeconnectivity.com and it pass all tests.
I also check the Firewall and all the necessary ports already opened (we even open all ports) , the default TTL on the firewall 3600 second.
From what I read ActiveSync use some kind of HTTP POST or in MS terminology "PING" command, but still have no idea what kind of configuration that should be made to the Firewall so it can pass this "PING" command. Because from what I
see in Android Logcat the problem always related to this PING command
10-07 08:12:38.714 I/Exchange(31971): Interrupt with reason 1
10-07 08:12:38.714 I/Exchange(31971): Ping task ending with status: -1
10-07 08:12:38.904 D/Exchange(31971): created outputstream
10-07 08:12:39.204 W/Exchange(31971): IOException sending mail
10-07 08:12:39.204 E/Exchange(31971): Generic error for operation SendMail: status 200, result -100
10-07 08:12:39.204 W/Exchange(31971): Aborting outbox sync for error -99
10-07 08:12:39.274 I/Exchange(31971): Ping task starting for 3
10-07 08:12:39.304 D/SyncManager(644): failed sync operation [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71219435, EXPEDITED, reason: 10040, SyncResult: stats [ numIoExceptions: 1]
10-07 08:12:39.304 D/SyncManager(644): not retrying sync operation because SYNC_EXTRAS_DO_NOT_RETRY was specified [email protected] u0 (com.android.exchange), com.android.email.provider, USER, latestRunTime 71220078, EXPEDITED, reason: 10040

Hi ronaldosy,
How about the work flow of Outlook or OWA on PC internally/externally?
If only phone has this issue, I suggest ask ActiveSync Forum for help so that you can get more professional suggestions. For your convenience:
http://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrmobility
Best Regards,
Allen Wang

Hi Apple Team, my iphone can't share files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it becoming difficult for me to share.

Hi Apple Team, my iphone can't share bluetooth files with my macbook pro. But other devices can share bluetooth files with my mac book pro. Please, kindly open up bluetooth to accept all connections from all devices. Now it difficult for me to share bluetooth files from my mac bookpro to my iphone, unless i attached it through email.
We need it to be acceptable to all devices.
Thank you!

You can tell Apple directly at the link below.
http://www.apple.com/feedback/iphone.html

Weblogic realm authentication failure getting connection from pool

We are getting this error when we try to get a connection from the
pool for a Tx Data Source. We are successfully getting connections
from a (non-Tx) Data Source.
java.lang.SecurityException: Authentication for user Fitness_demo
denied in realm weblogic
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.security.acl.Security.doAsPrivileged(Security.java:481)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:127)
We have added the DB user as a user in the realm, which usually does
the trick; but in this case it does not. We are using Merant's
JSQLConnect type 2 driver for SQL Server, and we are running on
Solaris. The scenario works fine using Oracle Thin driver on Windows.
Do we need ACL entries or something? We do not have any ACL entries
now.
Thanks,
-wes

We are getting this error when we try to get a connection from the
pool for a Tx Data Source. We are successfully getting connections
from a (non-Tx) Data Source.
java.lang.SecurityException: Authentication for user Fitness_demo
denied in realm weblogic
at weblogic.security.acl.Realm.authenticate(Realm.java:212)
at weblogic.security.acl.Realm.getAuthenticatedName(Realm.java:233)
at weblogic.security.acl.internal.Security.authenticate(Security.java:125)
at weblogic.security.acl.Security.doAsPrivileged(Security.java:481)
at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:127)
We have added the DB user as a user in the realm, which usually does
the trick; but in this case it does not. We are using Merant's
JSQLConnect type 2 driver for SQL Server, and we are running on
Solaris. The scenario works fine using Oracle Thin driver on Windows.
Do we need ACL entries or something? We do not have any ACL entries
now.
Thanks,
-wes

Dbcon connection from sap db2 to external sql server

Hi ,
I am trying to connect from my sap server which is in unix platform with DB2 database to external SQL server using DBCON as MSSQL_SERVER=<server_name> MSSQL_DBNAME=<db_name>. But while running ADBC_TEST_connection i am getting the error . When i check the error log it says
Loading DB library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so' ...
M *** ERROR => DlLoadLib()==DLENOACCESS - dlopen("/usr/sap/SID/SYS/exe/run/dbmssslib.so") FAILED
"Unable to find library '/usr/sap/DVL/SYS/exe/run/dbmssslib.so'." [dlux.c 445]
M {root-id=002655A9DCD21EE3B89D69F99DF39F0D}_{conn-id=00000000000000000000000000000000}_0
B *** ERROR => Couldn't load library '/usr/sap/SID/SYS/exe/run/dbmssslib.so'
How to resolve this issue. As it was mentioned in few forum we need to download the dbsl library from kernel patches and to load in kernel path. As my db is DB2 can we download dbmssslib.so this library and load in kernel file? Is it will work?
Regards,
Rai

Hi Rai,
This error indicates that the ABAP stack could not find the SAP DBSL for SQL Server (dbmssslib.dll) in the kernel directory. If you encounter this error on a Unix - based server the root cause is clear: the DBSL does not exist for other platforms than Windows or Linux x84_64. In this case use a Windows-based or a Linux x86_64-based SAP Application Server to establish the connection. If your system does not contain a Windows-based or a Linux x86_64-based Application Server you need to setup a small one as workaround. If you encounter this error on a Windows Application Server or a Linux x86_64 based Application Server make sure that the DBSL is properly installed in the kernel directory as explained in the document below.
For more details on configuration and troubleshooting refer to below SCN document
How to access an external Microsoft SQL Server database
Hope this helps.
Regards,
Deepak Kori

Remote Connection from SAP to MS-SQL server

Hello Experts,
We have been following 2 options so far and we have come across some issues
The first Option is to call a stored procedure (this is our preferred method) which does the data transfer for us
We have been able to test this scenario successfully from SQL Server side
However, while calling the stored proc via native SQL from ABAP we have come across an issue which is due to SQL 2005 changes (Schema implementation and difference in the security context)
While calling the stored procedure from the ABAP Code we have an error
The program short dumps with runtime error DBIF_DSQL2_SQL_ERROR, exception CX_SY_NATIVE_SQL_ERROR. The database error code is 15274, and the error text is
"Access to the remote server is denied because the current security context is not trusted."
This issue is new after the SQL Server 2005.
We are trying to resolve that.
Secondly we have been trying the DBCON option as well as per OSS Note 323151
We have a few things thatu2019s impacting our scenario:
The remote servers are in a different domain
The remote servers are located in DIZ
Remote server is a named instance
Remote server has been configured with a different port than standard (1565) u2013 All Connection strings will need port in there
The Database name starts with a numeric value
Due a combination of factors as mentioned above the standard approach does not work
Have any of you used this approach while connecting from SAP to MS-SQL server? Do you know of any successful methods to connect to SQL using ABAP (or not) from SAP.
Thanks in advance,

Yes,
DBConnect & UDConnect.
Works like a charm.
We write data into a MS-SQL database via DBConnect & an ABAP program (using open sql).

RFC connection from SAP Data services to SAP ECC

We have data services set up in linux machine. I am trying to set up RFC connection between data services and SAP ECC.
From data management console after creating RFC connection i am getting "RFC_bad_connection" error message. Username , password, system number, hostname and client is working from SAP GUI and has all the authorizations. SAP gateway and service is name is correct.
Did anyone had similar issue and what was the solution. Do we have start the RFC connection from linux data services machine, i didn't see any sh executable to do so.
Thanks in advance for helping to solve the RFC connection issue.
Edited by: gupta sasha az on Dec 19, 2011 7:24 PM

I am new to SAP and we have just started work on Data Services.
I wanted to know the complete procedure as in how can I establish a connection between Data Services and ECC.
Thanks for your help and time.

Designer Connection from SAP R3

Today it is possible to have connection from Designer to SAP R3, if possible I can send documentation about this issue is very important to our company know of their viability.
I appreciate your help.
Greetings

Hi Ingo;
We have SAP R/3 system running on Oracle Database. What I would like to ask is, is it possible to connect directly to the oracle to build a universe using R/3 tables in Oracle?
Thanks in advance
Dogus

SAP DB Connection from SAP BI on HP UNIX to MS SQL External Database

Dear All,
Greetings!
I have a scenario to configure a SAP DB Connection from SAP BI System on HP UNIX 11i to the external legacy system MS SQL 2000 Enterprise for data upload. I am interested in connecting the SQL server as a Source System to the BI System.
I read through documents mentioning about installation of a Client driver in the SAP BI System, I also downloaded the JDBC client software and tried installing the same, but the steps as mentioned Setting the CLASSPATH or connecting to the server did not work.
Please help me in connecting the SQL Server as Source System, I would like to know in detail about the same - so kindly help me with the links to documents and guides about the same.
Thank you
Regards,
Vineeth Damodar

Short answer: this does not work.
Long answer: To connect directly to the database you need
- a database client for the source system
- a database interface library for the source system
Both of them are not available for HP-UX if the target database is SQL server --> doesn't work.
What you can do is: add a Windows application server to your BI system (heterogeneous installations work and are supported) and add there the database client and the database interface library.
Markus

Connection from SAP ERP 6 to B1i2007

Hello,
the test-connection between B1i and SAP is working, but when trying to test the connection from SAP to B1i, SAP gives the error mesaage that "the program is not registered".
The B1i-System seems to be not registered in the SAP and it is only shown as "external client" (and not as registered server).
Another problem is that in B1i we have entered as programID-name "B1iRFC" but SAP shows "tomcat5" as TP-name.
I thought B1i would register automatically on the SAP with the name of the programm-id entered.
Do we have to change someting in the tomcat-server or where to find the problem?
Thank you,
Peter

Hello Eddy,
thank you for your answer, but in R/3 I define a RFC-connection with a registered server programm by using the programID out of the B1i-RFCP-configuration, right?
And when trying to make a test-connection, I got an error message that there is no registered program with this programID.
I thought that B1i have to be registered in SAP or in the SAP-Gateway with the name of this programID.
I think my problem is the registered server program in R/3. Where do I get this program and how to register in the R/3 gateway? Isn't the tomcat-server this program?
Best regards,
Peter

HTTPS connection from servlet to another webserver

Hi,
We want to make a https connection from a servlet in weblogic server to another
web server (not necessarily weblogic). We also need dual authentication. But whenever
we use URL.openConnection(), it always returns us weblogic's internal https and
SSL implementation. Since weblogic has no documentation about how to use these
internal classes, such as how to set trusted server certificate, and how to set
client certificate (servlet is a client of another web server). We want to use
jsse, after setting JSSE required system properties, I still get a weblogic's
httpsURLConnection. Can any of you tell me how to resolve this issue?
Thanks.
Xinshi

Yeah, I'm using JSSE now. Here is what I did:
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provide());
Provider prov = new SimpleSecureProvider();
prov.setProperty("SecureRandom.efficient", "test.EfficientSecureRandom");
Security.insertProviderAt(prov, 1);
You don't really need the provider stuff to get the example working. I use it
to get around a quick in JSSE where the random number generator takes 15-30 seconds
to generate a random sequence at start up.
SimpleSecureProvider looks like this:
public class SimpleSecureProvider extends Provider
public SimpleSecureProvider()
super("SimpleSecureProvider-", 1.0, "Hack to enable more efficient random
seed generator");
test.EfficientSecureRandom is bascially an exact copy of Sun's SecureRandom.java
with the only difference that I used my own random number generator.
Anyway, rest of the code you need looks like this:
URL url= new URL("htps://someplace.com");
URLConnection sconnection = url.openConnection();
Do whatever.
I also stored jcert.jar, jnet.jar, jsse.jar in /usr/java/jdk1.3/lib/ext
I think that is everything.
I just noticed that service pack 9 has a security example that does not require
all these jsse hacks. I'm trying to get it to work, but not having much luck.
Anybody got this working right?
"Jayesh Patel" <[email protected]> wrote:
See if this works,
1. Add the 'j2ee.jar' to CALSSPATH in weblogic startup script.
2. Set the property SSLHandlerEnabled flase in config.xml
3. Add the following property permission to the
weblogic.policy' file under a 'grant' directive
for all codebases (bottom): 'permission java.security.AllPermission'
4. Use the following bit of source code to create an https connection:
import com.sun.net.ssl.*; ....
com.sun.net.ssl.HttpsURLConnection connection;
System.setProperty ("java.protocol.handler.pkgs",
"com.sun.net.ssl.internal.www.protocol");
java.security.Security.addProvider(new
com.sun.net.ssl.internal.ssl.Provider() );
URL url = new URL( "https", hostname, query );
-Jayesh
connection = (com.sun.net.ssl.HttpsURLConnection )url.openConnection(
"Xinshi Sha" <[email protected]> wrote in message
news:[email protected]...
Hi,
We want to make a https connection from a servlet in weblogic serverto
another
web server (not necessarily weblogic). We also need dual authentication.But whenever
we use URL.openConnection(), it always returns us weblogic's internalhttps and
SSL implementation. Since weblogic has no documentation about how
to
use
these
internal classes, such as how to set trusted server certificate, andhow
to set
client certificate (servlet is a client of another web server). Wewant to
use
jsse, after setting JSSE required system properties, I still get aweblogic's
httpsURLConnection. Can any of you tell me how to resolve this issue?
Thanks.
Xinshi

HTTPS connection from database

Hi all,
I have to implement https connection from a database with a Web server which requests a client certificate. I have the certificate in the wallet, but UTL_HTTP does not send it to the Web server.
So, is there any way to connect to a Web server which requires a client certificate?

Could you explain how transport protocol influences certificate exchange during SSL session?

HTTPS connection from portal to external webserver

Hi,
I am looking for a way to open a HTTPS connection from portal server to an external webserver. According to <a href="http://help.sap.com/saphelp_nw04/helpdata/en/e2/71c83edf72e16be10000000a114084/content.htm">SAP</a> the code should look like
KeyStore keystoreCAs = ...
SecureConnectionFactory factory = new SecureConnectionFactory(keystoreCAs, null);
HttpURLConnection con = factory.createURLConnection("https://www.mycompany.com");
Does not look difficult, <b>but how do I create the keystore object</b>? The keystore object should somehow be connected to the portal server's keystore which manages the certificates of trusted Certificate Authorities.
Any ideas?
Regards,
Martin

Hi,
meanwhile I solved the problem by my own. The solution slightly simplified is given below.
javax.naming.InitialContext ctx = new javax.naming.InitialContext();
java.lang.Object o = ctx.lookup("keystore");
com.sap.engine.services.keystore.interfaces.KeystoreManagerWrapper_Stub manager = (com.sap.engine.services.keystore.interfaces.KeystoreManagerWrapper_Stub) o;
java.security.KeyStore keystoreCAs = manager.getKeystore("TrustedCAs");
com.sap.security.core.server.https.SecureConnectionFactory factory = new SecureConnectionFactory(keystoreCAs, null);
java.net.HttpURLConnection con = factory.createURLConnection("https://www.mycompany.com");
For connecting via a proxy the host name and port number of the proxy have to be set as System properties using "https.proxyHost" and "https.proxyPort".
java.util.Properties systemSettings = System.getProperties();
          systemSettings.put("proxySet", "true");
          systemSettings.put("https.proxyHost","192.168.0.1") ;
          systemSettings.put("https.proxyPort", "80") ;
Additionally you have to make sure that the server's certificate is issued by a trusted Certification Authority (Must have an entry in your Keystore "TrustedCAs"). To verify this use the Visual Administrator and view service "Key Storage".
Regards,
Martin

Connection from SAP to our systems involving 2 saprouters

connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!

Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table

WebAS-connection from EP to BW

Hi,
I am just checking the SSO connection from EP6 (SP12) to BW 3.5
SSO is running fine, the connection test from the system object in my PCD succeeds. The WebAS-test fails, saying that the WAS-parameters are valid, but http/s-connection fails.
Accessing the WAS-URL using the browser directly works fine ....
Do I have to perform all those JCo-Connection settings described in Making Settings for SAP BW 3.5 and SAP EP 6.0 (http://help.sap.com/saphelp_nw04/helpdata/en/ab/9659400d9d1059e10000000a155106/frameset.htm) just for calling BW report-iviews?
Martin

Hi
Did you gave the ip address of SAP R/3 system in the was host name... if not give it as ip of SAP R/3 system
Check the following link also
https://www.sdn.sap.com/sdn/collaboration.sdn?node=linkFnode6-1&contenttype=url&content=https://Re: How to build a BSP iview?
Regards
Rajeev.

Connecting from 10.4 to 10.5

Similar Messages

Maybe you are looking for