Connecting from dial up to wireless and back

I operate my Mac Book Pro with airport. My home is wireless. I am going to visit someone who is on dial up and would like to take my computer. I've purchased the USB modem needed to connect to dial up, howver, the instructions state a reconfiguation is needed. My question is what happens when I return home to the airport if the computer is configured for dial up? Will it require me to reconfigure for the airport? Has anyone done this? Thanks

All you have to do is in system preferences, in network re-chose Air-Port instead of dial up. Your Air Port settings will be saved
Chuck
eMac Mac OS X (10.4.8) 1.42Ghz PPC G4

Similar Messages

My hp6600 printer is connected to my wireless which is provided by my TimeCapsule. my Windows7 prints fine wirelessly. however my MACBooks do not print wirelessly. I can scan from HP6600 to MACBook wirelessly and if I print the queue looks ok but no print

my hp6600 printer is connected to my wireless which is provided by my TimeCapsule. my Windows7 prints fine wirelessly. however my MACBooks do not print wirelessly. I can scan from HP6600 to MACBook wirelessly and if I print the queue looks ok but no print comes out.
can anyone assist pls!

It sounds like the windows computer has captured the printer..
I suggest you turn the windows computer off.. reboot the rest of the network and see if the Mac can then print.. if not, remove the printer setup in the Mac and redo it.
Remember the TC has absolutely nothing to do with this.. TC is merely a wireless router.
This is windows and Mac interferring with each other.

I can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

i can connect my tc to the internet and back up my iMac, but it will not back up my mac book pro... ANY thoughts?

When I go to connect my MBP, it says I have the wrong user name and/or password; however the names and password are the same on both computers.
The MBP connects smoothly to the internet, just not the TC.
Does this help?
There is no login name required to get internet unless you are running a vpn or pppoe client.
The wireless uses a security key.. but that is fixed in the wireless setup.. so no user login should be required at any time.
It sounds to me like you have the wrong setup.
Please do a screen shot and post it of the imac setup that works.. show us the airport network with its ip address and where you are putting in the login.
Please also do a snapshot of the TC and how it is setup.
What broadband do you have?
Is the TC a router or bridged?

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and back

I would like to use my iPhone 6's wifi hotspot to provide Internet at home (I do not have home internet) via a Time Capsule which I currently use the TC simply as a home wifi network without Internet to enable things like printing wirelessly and backing up data wirelessly via time machine.
I have a Mac Pro, iPhone 6, iPad, Apple TV and Time Capsule. No home Internet.
Is is possible to have my iPhone 6's wifi hotspot used to provide Internet to my wifi network on time capsule? Has anyone else had success doing this? I'm not a tech head and really know very little about things like this. Thanks. Jen

You can have a go using a wireless bridge.. eg the airport express will do this.. you can join it to the iphone wireless running as a hotspot.. and then plugged into the TC wan port.. the TC has to be setup in router mode.. so this is going to give you double NAT errors.. and of course errors for all the time the hotspot is turned off.. but it can work. However you might find it requires you to manually connect up each time.. If you are really going to try and do this you will manage it.. but how fiddly it becomes might put you off after a week.
You will chew up your 5GB very fast using any streaming media even radio. So be very careful to track the usage.
Apple should have built in the TC the ability to plug in a wireless 3G modem.. via the USB but Apple have ceased to do adventurous stuff.
If you give up the TC as main router there are plenty of better products on the market that will handle multiple wan connections.. !!

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Blue screen of death, and continous reboot. Phone never actually boots up, just keeps going from reboot to blue screen and back again. Any suggestion?

Hello jared1915
If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.

When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back. The problem occurs in both MS Word and Pages. Any idea of how to resolve this annoying problem is appreciated. System: 10.10.1

When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)

The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

I changed from one iPhone to another and backed the first one up to the icloud. I have restored the content to my new iphone but cannot download the photos. Any advise will be greatly appreciated

Welcome to the Apple Community.
Photos and some other items are added back after the restore has completed, you may need to wait a while.

How do I copy iPhoto 7.1 Library from Intel to PPC Mac and back

Hello all
I apologize for the long first post; but I've been lurking for a while and haven't seen a similar problem. Any assistance would be greatly appreciated.
I have two Macs - a PowerBook G4 and an Intel Mini. I copied the 6.x Library from the PB to the Mini. The copy was successful - no issues. I upgraded iLife on both machines successfully: both machines opened the 6.x Library and updated it the 7.0.1 Package Library. All was well.
I updated both machines to iPhoto 7.1. All was well.
I updated the PB to 7.1.1 + all the recent updates. All was not well! The Library seemed to be corrupted! When I clicked on a thumbnail I would see the photo "zoom" but then I'd see a black window. Clicking again would unzoom and I'd again see all the thumbnails. If I tried to export a photo Preview couldn't view it because it was "corrupt" or should be opened by another application.
After numerous troubleshooting steps - repairing permissions, deleting preferences, trying to rebuild the thumbnail caches, rebuild the Library, recover lost photos etc I gave up.
I've wiped the PB clean and installed Leopard and iPhoto 7.1 - not 7.1.1.
Now I want to copy the iPhoto Library from the Mini (also iPhoto 7.1). I tried copying the package across the network by "Connect to server" in Finder but that produced the same "corrupted" symptoms. (Thumbnails would zoom to black window.)
So here's the question(s):
Are there any incompatibilities between Intel/G4 versions of the iPhoto apps or Library Packages?
What is the best way to manually copy the Library from the Mini to the PB? And back?
I use the PB on the road and on vacation to capture my 'photos; but I like to display them on my HDTV connected to my Mini - hence my need to periodically copy the Library from the PB to the Mini.

**boojum**
Welcome to the Apple Discussions.
Are there any incompatibilities between Intel/G4 versions of the iPhoto apps or Library Packages?
No.
What is the best way to manually copy the Library from the Mini to the PB? And back?
Try using Firewire target mode.
Regards
TD

Connecting to Time Capsule via wireless and uverse

Here is my setup: I have Uverse and a Time Capsule. I have Uverse creating a wireless network, the TC plugged in via ethernet cable to Uverse and set in bridge mode. The TC is also creating a wireless network. I can use any device to connect to the wireless of either the Uverse or TC without any problems.
When trying to access the harddrive on the TC from a windows machine I can be on either the Uverse or the TC wireless network and connect without issue. If IM on my MAC I can connect via any of the wireless options, but I can only access the TC Harddrive (via Finder) if Im connected to the TC wireless network, if Im on the UVERSE network then the TC says connection failure.
Same goes for accessing the airport util on the MAC. It can see the TC and change the settings when on the TC network, but not if on the Uverse network.
Am I doing something wrong or is this just how the MAC is set to view/handle the TC?
Thank you, Erich

There is a difference between the default domain of the Uverse and the TC.
There is also issues perhaps with ipv6 which is now important to access and use the TC.
Do you have ipv6 set to link-local on the computer? This is crucial.
Also try netstat scan from network utility (hidden now in Mavericks so just type network in the search in finder)
Do the scan and see what you come up with when connected to either box.
For Mavericks.. I think sticking to short names, no spaces and pure alphanumeric helps.
You can see the domain of the apple routers here is local. When the Mac gets an IP from the Apple router it will also pick up the domain.. so you can see my mini has local also as domain.. When it gets the IP from the Uverse it might not get a domain at all.. or it might be something else.
Anyway it gives you a few things to look at.
Try manually mounting the TC disk even if you still fail to get a connection using the Go, Connect to server from top menu in finder.
Use AFP://TCname.local or even better. AFP://TCIPaddress (where you replace with actual name or actual IP address)

Physical Connectivity from Fabric Interconnect to MDS and Failover please suggest

Dear Team
We have 2 FI and 2 MDS 1 SAN
Currenlty the connectivity is
2 direct physical connections from FI-A to MDS1
2 direct physical Connections from FI-B to MDS2
From MDS 1 connection to SAN Primary controller
From MDS 1 connection to SAN Secondary controller
From MDS 2 connection to SAN primary controller
From MDS 2 connection to SAN Secondary controller
Hope the above connectivty is fine?
we had looked at
http://www.cisco.com/en/US/prod/collateral/ps4159/ps6409/ps5990/white_paper_c11_586100.html (as team always preferred to go via cisco standards)
In FI we have to cluster the FI and Primary and Subordinate,likewise here for MDS to we need to? or will it be done via FIs ?
If not these 2 MDs they work independent but sharing the configs that happens among them?
Now what ever changes (Zone Creation)we make on MDS1 hope that will get relpicated to MDS2 via FIs?
If MDS1 Fails will all the configuration be available on MDS2 and still the infra will be smooth running ? and vice versa?
Any additional steps to be done to achieve it?
Which is the best way to achieve it please suggest
Thanks and Regards
Jose

Hi Jose.
Physically your connectivity is good.
On the UCS side, the 'Primary' and 'Subordinate' role refer only to the Management of the system and which device is actually running UCS Manager.
Each MDS device will have separate configuration (zoning). It's different between the 2 devices.
The blade itself will have a connection out each side, or 'SAN Fabric'.
e.g.
           +----+
       +---+    +-----+
       |   |    |     |
       |   |    |     |
       |   |SAN |     |
       | +->----<--+ |
       | |         | |
       | |         | |
   +---+-+-+    +--+--+--+
   |       |    |        |
   |MDS-A |    |MDS-B   |
   +--^-^--+    +---^-^--+
      | |           | |
   +--+-+--+    +---+-+--+
   |       |    |        |
   |UCS-A |    | UCS-B |
   +--+----+    +-----+--+
      |               |
      |               |
VSAN100    +-----+    | VSAN200
      |    |     |    |
      +---->     <----+
           |Blade|
           +-----+
The blade will have a HBA on FabricA (VSAN100) and FabricB (VSAN200)
Each HBA will have a different WWPN, and on the SAN array, each controller will have a WWPN
So on MDS-A, the zoning will be:
Blade WWPN A
Storage WWPN Primary A
Storage WWPN Secondary A
MDS-B, the zoning will be:
Blade WWPN B
Storage WWPN Primary B
Storage WWPN Secondary B
So the configuration is *not* synced between the two MDS devices, but they each have visibility to the blades vHBA device. At the blade level, the Multipathing software on the Operating System will handle any failover.
On the UCS, we would generally use a Port Channel up to the MDS.

How can I get connection from iMac to TV wirelessly ?

How can I view photos from my Mac hard drive or from an external hard drive on my TV screen? My Sonia Bravia TV is in another room and has a Wireless LAN adaptor which detects my Router and connects, and also detects an external hard drive connected to the Router via Ethernet. But it does not detect my iMac (can be connected to my router via ethernet or wifi- makes no difference), nor can it connect to the external hard drive. I don't care which source I send the photos from, but at least one would be good! The Router is a Netgear DG834GT.

You can use an Apple TV.
Otherwise, you cannot do what you are attempting. Your television cannot access the devices and files on your Mac.

From Tiger to Leopard. And back to Tiger...

hi =)
i was running tiger 10.4.10.
i upgraded to leopard quite smoothly.
then i installed the 10.5.1 update.
all went downhill from there on. i always verify/repair permissions + check HD before and after each installation, in addition to running the extended hardware test.
this evening, i finally gave up on leopard, erased my HD and reinstalled everything from the DVDs that came with my macbook (bringing me back to 10.4.8), as leopard could not install due to the macbook crashing all the time during installation (thank you 10.5.1).
i then ran my bootable clone external harddrive using superduper (thank you for backups!) to erase the HD and clone itself on the HD.
so basically, i am back to where i was before the leopard upgrade, i.e. in 10.40.
no data loss of any kind and all applications have updated smoothly, etc.
question:
considering the hassle experienced with 10.5.1 under leopard, and now that everything is running fine, should i tempt faith with the 10.4.11 update? or wait for the next one?
i might reinstall leopard eventually, as that upgrade went smoothly. it was only the 10.5.1 that created havoc.
thank you for your thoughts =)
dominique

hi barry
and thank you for the message.
i am using a USB modem to connect to the net when in the office, as access to some websites (myspace notably) is blocked on our company network.
these USB modems and their related software proposed here in swizerland are still only compatible up to 10.4.10.
so i might hold off on the 10.4.11 upgrade or going back to leopard until all non-apple applications i use (USB modem + superduper mainly) are compatible.
for superduper, i was manually updating all important files and folders on the lacie eyternal disk, so as not to lose its bootable capacity, which would have been lost by running superduer with leopard.
worked well, but a little time consuming =)
patience is the game sometimes.
dominique

How can I transfer my 'pages' from mac to I-pad and back again?

Hi, how can I use the 'Pages' on both my desktop and the I-Pad? I've tried using DropBox but it doesn't seem to work with Pages? Any other ideas?

This is how it works if your iPad is connected to your Mac and you want to sync back and forth.
Find the document in Pages on your iPad that you want to transfer to your Mac. Click on the curved arrow icon at the bottom of the window and a dialog box pops up with several options. You can choose any of these options to send the file to your Mac. The third option, the one that I use, is send to iTunes. Tap that icon, select the file type that you want to use for the document (Pages, pdf, .doc) connect your iPad to your Mac, launch iTunes, select your device on the left side of iTunes. Then select Apps in the top of the iTunes window and scroll down to the File Sharing box. Select Pages and then sync. That document will now be transferred to your Mac and you will see it on the right side the box called Pages Documents.
To go from the Mac to the iPad, (while the ipad is connected to your Mac as described above) select Pages in the File Sharing box, then click on Add in the lower right corner of the Pages document box, select the file that you want to transfer to your iPad, tap the down arrow icon in Pages on your iPad, select Copy from iTunes, and the file name will appear. Tap on that file and it will transfer.
Message was edited by: Demo

Having trouble switching from Photobucket to a forum and back again without losing my post.

I am so frustrated and I hope someone can help.
I need help adding pictures from Photobucket to a forum. I write a story on a forum and store my photos in Photobucket. On my old computer I was able to keep my photobucket page open in a small window and my post from the forum open in another small window. Then I was able to go back and forth between the two. I would write some of my story, go into PB and copy a picture, go back to my post, add the picture, write some more and do it again about 20 more times.
Now on my Mac:
I tried to hit the green minus to keep my photobucket page up but when I tried to go to my forum page I only got Safari and then it closed my photobucket page.
So then I tried ot use the scroll between pages to go back and forth between my post and photobucket. I got my story started, went into PB, copied a picture and pasted it onto my story then I scrolled back to PB to get a new picture...but when I scrioled back my entire post was gone. It didn't save anything that I typed or added. This will not work for me. There has to be an easier way...heck just a way to do it would make me happy.
So please if anyone knows how to do this, I would really appreciate the help.

Hi SLONER,
You need use the -source option on a non-Internet connected machine.
PLease try the script below:
Install-WindowsFeature Server-Gui-Mgmt-Infra,Server-Gui-Shell –Restart –Source c:\mountdir\windows\winsxs
And follow this thread:
PowerShell to Add GUI to Server Core (ServerCore-FullServer)
I hope this helps.

Connecting from dial up to wireless and back

Similar Messages

Maybe you are looking for