Connecting Guitar

Using a 1/4 to 1/8 adapter to connect an electric guitar directly to the Audio In port. System preferences < Sound < Input is set to Line-In. Output is set to Built-In Output.
In GB, Track Info is set to Guitar, No Effect. Monitor is on and I've tried Channel 1, 2, and Stereo.
GB Sound set to Built in Output and Built in Input. The only other input selection is for a Mic, which I've tried. New Basic Track is select in GB.
The system is not recognizing the guitar at all. I can hear no sound and strumming has no effect on the screen. Any help?

it appears you have everything set correctly, which leaves three obvious things to check...
1. that you're definitely plugged into the Line-In and not the phone-out jack
2. the guitar cable is good
3. the adapter is good (i've lost count of how many people have had this problem due to a faulty adapter)

Similar Messages

  • Connecting Guitar Port - HELP!

    Connecting Guitar Port - HELP!" Hello,
    I have just purchased Guitar Port and wish to find the simplest way to hook up.
    I have a <span class="mainlink">X-Fi XtremeGamer Fatalty Pro Series sound card with Logitech 5. speakers.
    If you follow this link to the manual and go to page 22 you will see their instructions: http://line6.com/data/l/c0a8090bee7b...%20English.pdf
    I want to have the sound go through my speakers and not have to crawl behind the computer and mess with the cables everytime I want to play guitar.
    Thanks!!!

    also note:
    http://www.thehangtime.com/gb/gbfaq2.html#pluginguitar

  • Problem connecting guitar to garageband on macbook pro 13 inch

    hi, how can i connect my guitar to the garageband if i want to record sounds? i am using 13 inch macbook pro which only has one audio port ( well, 15 inch has 2 ports ).. or do i need some interface devices?

    If the audio port is only a headphone port and not a combined line-in/line-out port, then you need a mac-compatible interface. See the FAQ for a list of some commonly used interfaces:
    http://www.bulletsandbones.com/GB/Interfaces.html:
    If your guitar has a usb connector you could just plug it into an USB port.
    Regards
    Léonie

  • Connecting guitar to MacBook Pro

    What's the best way to connect an electric guitar to my MacBook Pro so that I can use it in garage band?
    Thanks.

    Hi Bruce
    There are many options depending on your price point.
    I use this: iRig
    I can use it with my MacBook, my iPad & my iPhone.

  • Need help connecting guitar, a/i, speaker together.

    I'm new to this forum, and sure this has been covered, but i couldn't find what i'm trying to do. I want to connect my guitar to garageband, then output it live to either my stereo. I have an airport express connected to stereo if that helps me or not. At this point i can connect the guitar into my m-audio fast track usb, then into garageband. this works fine for playing through the built in speakers or headphones. I'm having problems finding a way to output live to speakers. Do i need to buy apple speakers to connect directly to my powerbook or can i output to my stereo. Also i might buy an amplifier to play on soon, and was wondering on how to connect that so that i can still go through garageband. I'm new to both garageband and playing guitar so any help would be greatly appreciated. - aaron
    ps also if any one knows of garageband friendly sites that will show tab and strumming patterns to to learn to play popular songs that would be cool too.

    Either go out from the Macs audio out or your fast track to your stereo.

  • Need help connecting guitar rig interface to play electric guitar

    I am having trouble connecting a guitar rig session interface. Garageband is not recognizing the connection. i have made sure the usb and guitar cables work. i have changed the sound input settings on both the system and garage band. when i plug in my keyboard directly with the usb, garageband recognizes it immediately. i have triple checked all the obvious settings on all devices. It seems that the interface is working, but im having a tough time recognizing it on garageband. any help would be greatly appreciated. thanks

    i reinstalled the guitar rig sessions driver and finally had garageband recognize the device, but still have not gotten input or sound. i have read the manual, but could not locate an answer.

  • Connecting guitar to new imac

    Just recieved the new 27" imac and i'm trying to connect my electric guitar. But there is no 3.5 audio input jack socket anymore just the 3.5 headphone socket? does this mean i have to buy a audio interface or a 6.5mm female to USB cable?

    does this mean i have to buy a audio interface
    Yup.
    or a 6.5mm female to USB cable?
    How's that supposed to work? Not without an audio interface somehow "integrated"...

  • Connecting guitar to computer

    I'm just starting w garageband. I have a Mac Powerbook G4, a fender electric guitar and a fender cybertwin amp. The amp has various jacks: midi in, midi out, midi thru, xlr r & l lines out, spdif output for connection to digital equipment such as a digital recorder. Can I connect my guitar to my Mac through this amp to record guitar tracks. If so which amp jack to which port on the computer?
    Powerbook G4   Mac OS X (10.4.7)  
    Powerbook G4   Mac OS X (10.4.7)  

    I have several pedals that I had prior to purchase of my Mac Pro. The only thing I wonder now is how they will work going into Garage Band with all my pedals including a Route 66 Compression/Overdrive (my favorite) or DOD Supra Distortion which are both hot pedals. I also have a Boss Digital Delay which is another stereo pedal. As long as I turn these pedals way down and turn them up slowly there should not be a problem right? The Mac apparently has some pretty hot settings since they hum like a pedal turned up. I also want to know if plugging the jack in while everything is on will be a problem. When some of the pedals are powered up they automatically come on. Or is it simply okay to make sure they are turned down before powering up the pedals since the Cool Cat, Supra Distortion and Digital Distortion all come on at the same time when they get power. (Tubes don't mind this feature.) I wish Garage Band had more "tube like" sound profiles. Tubes have such a warm rich sound.
    For the cable connection, I will try the mono to stereo to see how it works. But I do like the stereo effect however. I appreciate your input.

  • Quarter-inch female to a 3.55mm male to connect guitar to my Ipod Touch 4th gen. It still records from mic and not from wire.

    Hey everyone, I recently bought a quarter-inch female to a 3.55mm male to connect my acoustic electric guitar to my Ipod Touch 4th gen. Now when I connect it, it doesn't actually take the sound from the wire, it still keeps the mic open. Any suggestions?

    You can try putting the iPod into Recovery Mode and restoring it:
    http://support.apple.com/kb/ht1808
    If that doesn't work, then sorry but the jailbreak may have permanently corrupted your iPod. Since we cannot help with jailbroken devices in these forums, you'll need to look elsewhere for additional suggestions and advice.
    Regards.
    Message was edited by: Dave Sawyer

  • Connecting Guitar to Live Dr

    Hello,
    I want to connect my electric guitar to my computer using my Creative Li've Dri've. I have a Creative Sound Blaster Li've! sound card. Although I can hear my guitar the sound is very faint, i.e. low volume. Do I need to use a pre-amp or something? Is there anyway that the sound card can amplify the sound? If no, can I connect the headphone out of my guitar amp to the line in of the Li've Dri've?
    I don't have a pre-amp or a guitar processor, only an amp. So please tell me if what I want to do is possible with my equipment.

    Well, a pre-amp that creates a line-out signal is needed to get a real signal into the soundcard. A pocket-mixer, porta-studio, redline box, anything that can produce a line-out signal.

  • Connected guitar with 1/8" to 1/4" – sound is "clicky"

    I recently purchased the Griffin guitar cable (1/4" -> 1/8"), and I'm experiencing a very "clicky" sound in Garageband, as though the sound of my pick touching the strings is overbearing the actual sound of the guitar.
    I'm connecting a Yamaha APX500 acoustic/electric, and have the volume on the guitar set to medium/high with the EQ set flat.
    Has anyone experienced this before who can help out?
    Thanks!

    I don't think i can buy something like this in my country
    But can try to find something similar USB to guitar cable...
    It this doesn't work then the problem is in the sound card. I gues

  • Connect guitar to ipad

    hi =) can someone tell me how can I connect my electric guitar to my ipad, i guess i need some lead but I am not sure which and is there one in the apple store =) my guitar store said they do not sell them
    thanks:)

    go to the online Apple store and search for guitar.
    I don't have one but this sounds good.
    Apogee JAM Guitar Input
    Studio-quality guitar sound on iPad, iPhone, or Mac
    With Apogee's Jam, you can plug your guitar directly into your iPad, iPhone, or Mac and experience studio-quality sound with incredible ease of use. Now it's easier than ever to record, practice, or jam anywhere.
    1/4-in. instrument input for electric guitar or bass
    Best guitar tone with PureDIGITAL technology
    Control knob for easy input level adjustment
    No configuration, just plug in and play
    Made for use with GarageBand software

  • Connecting Guitar to Garageband

    Hi - I am new to Garageband and to Macs in general and I would like to lay down some guitar tracks on top of the groove I put together using the GB loops. I have heard that it is best to use a firewire/USB interface such as a Firebox to connect to the computer. I am wondering if some of you out there have used this piece of gear and what your experiences are with it, or with others like it.

    Thanks for all of the responses! I ended up purchasing a PreSonus Firebox. I was trying to install Cubase LE that came with it and apparently there is some known issue with the version of Cubase and MacOSX. It is version 1.07. Steinberg doesnt' seem to offer any patch for it nor does Apple that I can find. I bought the unit second hand, so I am not sure what recourse I have.
    On another note, I have a Fender Deluxe amplifier with a Preamp Out - is that the same as a Line Out? Can I use that to connect to the Firebox? I haven't set it all up yet as I just got it.

  • Connecting guitar to Garageband finally

    Greetings,
    I have played acoustic guitar for many years. I wouldn't classify myself as an expert nor a novice, just somewhere in between. I recently decided that I want to mess around with Garageband a little bit and I have looked at the Apogee Duet as a perfect medium to get hooked up.
    I currently own 4 guitars (Guild, Taylor, Gibson & a cheap Takamine Jasmine) The only one that is acoustic/electric is the Takamine Jasmine and it sounds "just OK" compared to the rest.
    Even though I have played several years, I have never used or messed around with many amps or effects, and especially different ways to connect the guitar to the amp or in this case the computer. What would be the preferred way to get this done? Shold I get a microphone and place close to my better guitars or should I get a separate "hook-on" pickup to get this done? What if I want to try some of the built-in heavy amps/effects to mimc an electric for my acoustics without the pickup. Can they still produce effects with a mic only?
    Any guidance or recommendation would be appreciated?
    Thanks

    a lot of that is really opinion.
    Mine is that Mics are the way to go without question. If you're going to choose a Duet as your interface (a very good choice) and have 2 mics, you should be able to record some very good sound:
    http://www.bulletsandbones.com/GB/TricksHacks.html
    and yes, you can use effects no matter how you record

  • Very low sound when I connect guitar

    Hello
    When I connect my guitar to logic via fast track ultra I can barely hear the sound, it's so low. Instead I have to use logic plugins make it sound at normal volume. How can I get this normal?
    Kind regards
    Frankensten

    My guess is you're not plugging into a Hi-Z input.
    In other words, when DI recording a guitar, because the signal is naturally very quiet, a line level input is no good. Many interfaces these days have a designated Hi-Z input, so check (I'm not familiar with yours). If you don't have this option you can buy cheap units (DI Boxes) that do the job.
    This should solve your problem and give you the right amount of gain.
    (Again, don't rule out volcanic ash)
    Message was edited by: siderealxxx

Maybe you are looking for

  • Internet Explorer Upgrade Problems

    Hello, I currently have a 32 bit operating system running internet explorer 7.  When I attempt to upgrade to explorer 8 or later, I get a message that my system does not support it? I'm at my wits end.  Does anyone have any advice or resolution to wh

  • Dynamic where clause in Loop

    Is iot possible to use a dynamic where clause in a loop?  If so how to you code this? i.e. Loop at itab in wa where (dynamic_where_clause)...     endloop... Moderator message: please read ABAP documentation for your SAP release. Edited by: Thomas Zlo

  • Custom Fields not shown in BSEG using OXK3 transaction

    Hi, I have added new custom fields in Expert Mode using OXK3 transaction to add new fields in BSEG table. The Include CI_COBL is created with custom fields in OXK3  . I then tried to add fields by selecting "Add Field to BSEG" but an access key is re

  • How to call a method of a class from another class

    Hi, Can some one explain me this? I want the label from the Label class to be displayed in the JFrame. I understand to do this, I have to call "label" to the ABC() and createAndShowGUI(). I am novice. It will be really helpful if you could explain me

  • Clients getting errors after ZAM deployment

    Hi, I have created one NAL to deploy the ZAM Asset management to all Asian workstations. now there is one site all workstations getting one errors "windows xp setup: the application could not be initialized when start up" after deployment. this error