Connecting hp 4620 to wireless network with an apple airport express and apple OS X 10.5

Any help would be greatly. This setup used to print wirelessly just fine until we switched internet providers and now the printer will not connect via the airport express router. I've tried going into the airport utility, manual set-up, base station.....but there is no "add wireless clients" to choose like all the online help that I've read says should be there. Thx in advance, Matt
This question was solved.
View Solution.

Hi Matt,
Temporarly connect the printer to your mac with a USB cable.
Go to Applicatons > Hewlett-Packard > Device Utilities and follow the HP Setup Assistant.
Select wireless connection during the setup, you will be prompted to provide your wireless network details to reconfgure the printer on your new network.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Extend my old wireless network with help of Airport Express

Hello,
I have a one year old Siemens SL2_141 router which I was using to create a WiFi Network and simultaneously use the Ethernet port to connect to my PC.
Now recently I purchased a new Airport Express, and I am not able to extend my old Siemens WiFi Network with the help of this, it shows me "This network can't be extended". Can anyone help me if I am missing something here.
Do I need to change and other settings on my old router.
I have uploaded few snapshot of settings of my old router here: http://cl.ly/2v8I

But many people here pointed out that, they can extend there Linksys router's WiFi network with Airport Express
Sorry, but the only known compatible Linksys routers are the models WRT54G and WRT54GS. All of the other Linksys models are not compatible.
You have a Siemens router. It is not on the list of known compatible devices, so as Tesserax points out, it is highly unlikely that you will be able to configure it to work with the AirPort Express.
Lists of the the known compatible devices are on the Internet and have been posted many times on this forum. The list is as follows:
3com OfficeConnect ADSL Wireless 11g Firewall Router model 3crwdr100a-72 but ONLY with NO encryption
Belkin F5D7230-4 and F5D7231
BT Voyager 2091 or 2100
Buffalo WGR-G54
Linksys WRT54G or WRT54GS (not latest versions v5)
Netgear WGR614 v6
Thompson 585v6 wireless router (40 bit WEP works but stronger encryption does not)
Message was edited by: Bob Timmons

Can I extend my wireless network with a WIRED Airport Express?

So I've seen many, many threads (both here & elswhere on the web) that talk about extending a network wirelessly, but that's not my exact goal.
I have a Linksys WRT54G and an older (non-N) Airport Express. My intention is this: come out of the cable modem and into the WRT54G's LAN port. (Typical.) Then I have wall jack-plates where ethernet runs are extended to various rooms in my home. The WRT54G is on one end of the house and at the far end the wireless signal is basically useless.
I would like to come out of one of the WRT54G ports into the wall jack and then hard-wire into the Airport Express (at the far end of the house) for the sake of increasing the wireless signal there. I know that there are WDS issues with the Airport Express and NON-Apple networking gear. However, does hard-wiring the AE circumvent this?
How should I configure the AE, if this is possible at all? As a relay, as a remote? Join the extisting network, etc.

Interestingly the Linksys WRT-54G is one of the few non-Apple routers that are WDS-compatible with the earlier 802.11g AirPorts. There are a number of posts on the Internet (use the following search terms: Linksys AirPort WDS) where the authors described how they configured theirs to work.
If; however, you don't want to "experiment," your suggestion to interconnect the two routers by Ethernet should work just fine. In this case, you would want to configure them both for a roaming network.

Need help setting up WiFi - Xfinity with Network Switch, Time Capsule, Airport Express and Apple TV

Hello - I recently got Comcast Xfinity service. We had switched from a different service. Our wifi service was never great, but prior to Xfinity, it worked decently. But now that we have Xfinity, our wifi is much worse and very unreliable. I am seeking advice on how to setup my various Apple wifi devices in my home. I have attached a diagram that illustrates what I am dealing with. We have a large old house with stone walls. Comcast does not support this issue.
To explain the attached diagram, we have a total of 4 levels in our house - an unfinished basement, 1st floor, 2nd floor, and 3rd floor. The Xfinity router is in the basement and it is connected to a NetGear 10/100 network switch. I already have ethernet cables running from the network switch in the basement to various locations throughout the house. So I have ethernet connected to my time capsule and ethernet connected to each of my 3 Airport express devices. The dark lines running from the network switch to the various devices represents ethernet cable.
The immediate problem that we are having is that we are unable to connect to our wifi networks. The networks show on my mac laptop and my iPhone, for example, but I am unable to connect. I know that I am inputting the correct password, but most of the time, we cannot get in. Sometimes we can..... Very frustrating! Also, due to the fact that I setup what I have over several years, I have multiple network names. I once tried to fix that issue, but was unable to tackle it due to my lack of understanding.
Here is what I am looking to accomplish:
1. Seamless wifi access throughout our house.
2. One name for our wifi network. Right now we have multiple names for multiple networks. Just want to simplify and have only one network. (I guess that an additional "guest network" would be ok, but not absolutely necessary.
Also, if you think I should disable the Xfinity wifi, and just rely on my mac wifi devices, I am perfectly fine with this. Just tell me how to do so.
I have no idea how where to start or how to set this up. I imagine that I would need to disconnect everything and reset and start from scratch? Can someone tell me what I should do? Even general advice would be helpful, but the more specific, the better, given my limited understanding. Any help or advice would be greatly appreciated.
Thanks in advance!

Your photo link is not working. Click on the camera icon to load an image. (Shorten the name of the file to something like WifiNetwork.jpg)
Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can I extend my wireless network with my old Airport?

Can I extend my wireless network with my old Airport? I have the airport extreme 802.11n & my old Airport (translucent white) base station. Can I mix the two to expand my range?

No problem; ask as many questions as you need to.
How do I reconfigure the Snow as a bridge to allow the AEBSn to continue to provide both NAT & DHCP services for the entire network?
I don't have a Snow to verify this, but it should be similar to the later base stations when using the AirPort Admin Utility.
To set up the Snow base station as a bridge, either connect to the Snow's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the Snow, and then, using the AirPort Admin Utility (located in the \Applications\Utilities folder), make these settings:
Network tab
o Distribute IP addresses (unchecked)
o Apply the new setting.

I am trying to link our xbox and PC into our wireless network. I am using an apple airport express and it is asking me for a WEP Key. Where can I find my wep key?

I am tyrying to link our xbox and PC int oour wireless network. I am using an apple airport express and it is asking for my WEP Key. Where do I find it?

You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
**Edit
Airport does support the WEP protocol.
Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html

I told my wireless network to forget two airport expresses so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. Does "forget" mean forever? How to reset?

I told my wireless network to forget two airport expresses 1 1st gen, 1 2nd gen so that I could rename them. Now the network does not see them even when plugged in about 10 feet away from the airport extreme base station. The network does recognize a totally new 2nd gen express. Does "forget" mean forever? How to reset?

The network does recognize a totally new 2nd gen express.
Then, it sounds like you have already reset the 2nd Gen Express, and now you need to set it up again, like you did the first time. Only, this time, assign the device name that you want to the AirPort Express.
Do NOT use the name that Apple suggests.....which will be something goofy like........Sueswimsf's Red Apple AirPort Express
Assign a simple name.....something like 2ndGenExpress

Airplay error with airport express and apple tv

I receive this message "An unknown error (-15006) occurred while connecting to the AirPlay device" when trying to play audio from iTunes on Macbook Pro to my airport express and/or apple tv. Both airport express and apple tv work fine with my iphone and ipad as well as streaming video from itunes library to apple tv from the Macbook. I have tried the previously posted solutions, but nothing has worked yet.

http://www.cultofmac.com/178460/the-real-reason-why-macs-before-2011-cant-use-ai rplay-mirroring-in-mountain-lion-feature/

Vista connection problem to a wireless network with Linksys BEFW11S4 ver.4 router

I've purchased a laptop with Vista and can't get it to connect to my existing wireless network. I have a Linksys BEFW11SF ver.4 router. When I attempt, I get, "Wireless connection failed because the network denied the association request from this computer." Anyone? Thanks.

Not sure about the Error ....but you can change the wireless settings on the router & see if it connects or not ....

Extending an existing wireless network with a new Airport Extreme(802.11n)

Is it possible to extrend a existing wireless network comprised on a Airport Extreme (g) and a Airport Express with a new Airport Extreme (n) ? and possibly accesss an airdisk? Have tried settng channel to the same (1) but no worky.
I have had real problems (at least 2 hours with Apple Care to no avail) at getting the new Airport Extreme(n) to connect to the internet (Ozemail/iinet) with PPOE. Authentication when changed to occur at ADSL modem and produces no errors (green light) but no internet still through AE(n). Not Hardware either as both ADSL modem and AE(n) have been changed.
So as a last ditch attempt, thought I might try extending the preexisting network that works fine so I can access an AirDisk.
Any reponses appreciated.

Search this forum for "WDS". Since I am having massive problems myself right now, I can only tell you: Try the two methods mentioned in this thread:
http://discussions.apple.com/thread.jspa?threadID=944334&tstart=0
Maybe you're lucky!

Apple Airport Express and PC Laptops - Wireless Network Help

Hello all,
I have two Wi-Fi enabled laptops running Windows XP, an Apple Airport Express unit and a Netgear DG-632 Modem/Router.
At present the DG-632 is running in modem mode and is connected to one laptop using the ethernet connection. The Netgear DG-632 Modem/Router has one ethernet connection and one USB connection.
My understanding is that if i run one laptop off the USB connection on the Modem/Router and connect the the DG-632 to the ethernet connection then the laptop on USB has to be turned on for the second laptop to access the wireless network.
Assuming the above is true (i am very likely wrong), it would be nice if both laptops were able to access the internet wirelessly via the Airpot Express Unit.
However, being a complete novice at networking, i am little confused about how to do this?
Any help, tutorials or advice would be greatly appreciated.
Thanks in advance.

I'm new. I have a Dell Laptop XP and my wife has a
dell desktop XP . I have DSL with a Linksys wireless
router. After many hours on the phone I was able to
get the ineternet set up for me and my wife.
After all this I found that my Airport Express system
couldn't connect to my stereo. It seems that the
router wireless connection pays no attention to
Airport. Apple says that they could set up another
wireless system to work for Itunes by using my
wireless card in the Laptop.
But... I can't listen to the music and surf the net
at the same time. A linksys person has tried to allow
Linksys to accept and proper installation to the
router. I tried is but it didn't work.
Dell Laptop Windows
XP Wireless card and Linksys
router
Dell
Laptop Windows XP Wireless card and
Linksys router
Sort of new here and to the AE, but have a Dell Desktop and Tosbiba laptop both running XPHome SP2, and on dialup
The Linksys router is hooked to the desktop with an ethernet cable. In the office.
The AE is in the living room and works great for surfing and ITunes.
The only way I could get my AE to work as an access point for dialup and stream ITunes from the laptop to the home theater was to use the setup found here.
http://rgbdream.com/?p=44
The only problem I had with the setup was do not use the $ when entering the password. And had to use a proxy server on the desktop for sharing the dialup. LOL no hope of any broadband here.
Hope this is some help.
Bob

How to setup a new network with a new Airport Express

I need help setting up a brand new Airport Express and creating its own wireless network. I have a Motorola SB6141 cable modem that is connected to a Airport Extreme. The new Airport Express will be connected by an ethernet cable in another room.
To set it up where do I place the ethernet cable, in the WAN or Ethernet on the back of the AE?
Any other suggestions are appreciated.
Thank you for looking.

Once you have the AirPort Express powered up, click on the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear.
Just below that, click directly on AirPort Express and follow the prompts.

Connecting to a foreign wireless network with my macbook pro

hi
i'm swapping my NY apt for one in italy. i have a brand new mac book pro and can see the network on my airport, and i have the WPA password. when i enter the password it says it's invalid.
i've read the apple support pages and troubleshooted the password, adding $ to the beginning of the password, quotes, X0 etc. to no success.
i have my swap's spare laptop here (hence i'm able to write here) and her laptop gets on the network with no problem. there's no ethernet cable here for me to try and see if i can get on that way.
i'm wondering if it has something to do with the modum settings (which i looked at on her laptop but they're um, in italian)...for example, there is an option for me to make the network public, but then i get a warning about the firewall (in italian).
i'm also wondering if it has something to do with my airport settings...do i need to change something in my airport preferences under 802.1?
i think it has something to do with her modum settings. but really i have no idea.
i've used the assist feature in airport, i've gone through diagnostics, i've restarted the modum and the laptop...
any ideas? thanks.

hmmmmmmmph. after asking my swap again and again for the password, she gave it to me again, with 5 more characters. yup...now i have PERFECT wireless!!!!!!
sigh. THANKYOU for your help....
sadly, in the meantime i managed to kill her wireless conection on her italian laptop, destroy her settings and can't find a way to resolve it because all the notifications are in italian. (i tried to make the network open) i'll have to call her tech guy to come in and reset them i suppose. argh!!
regardless...my mac has a great wireless connection now (if i had only had the correct password -- lesson learned...) happy happy happy...back to work...
thanks
s

Home wireless network in China using Airport Express ?

I am going to be living in China with my Macbook. I will be bringing my Airport Express with me.
I would like to know whether it is appropriate to connect up my Airport Express to a Chinese cable modem to obtain wireless internet access at home.
Or is it a very different system used in China for home wireless network.

Many, but not all of the same wireless channels in the US are allowed in China. See this Wikipedia Document for some information.
As to whether you will connect using ethernet or PPPoE, etc., that will depend on the provider that you choose.

Extending wireless network through ethernet using airport express

I am running a wireless network using a time capsule. When attempting to setup an airport express, the utility first could not find the IP address. I went back and set the express to act as a bridge. It seemed to work correctly, however the express is not broadcasting a wireless signal or my Mac cannot see it. i have used the Utility for all of the setup. Both the time capsule and the express are new. The mac is running os10.5.8.
John

+Do I need to turn of NAT for the roaming network to work?+
If your AirPort Extreme is connected to a modem (only one ethernet port on the device), then you need to configure the AirPort Extreme to handle both DHCP and NAT. This will be done for you automatically when you do the following:
Open AirPort Utility - Manual Setup
Click the Internet icon
Connection Sharing = Share a public IP address
If your AirPort Extreme is connected to a gateway (a combination modem and router that will have 3-4 ethernet ports), then you need to setup the AirPort Extreme as a "bridge"
Open AirPort Utility - Click Manual Setup
Click the Internet icon
Connection Sharing = Off (Bridge Mode)
All of your other devices...Time Capsule, AirPort Express must be configured as follows:
Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Wireless Mode = Create a wireless network
Wireless Network Name = Exact same name as your AirPort Extreme network
Radio Mode = Your choice, but should be similar to the AirPort Extreme
Channel = Automatic*
Wireless Security = Exact same setting as your AirPort Extreme
Wireless Password = Same password as AirPort Extreme
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings
* With a lot of devices, you may want to set the Channel manually. Set up separate channels for each device and keep the channels as far apart as possible.

Connecting hp 4620 to wireless network with an apple airport express and apple OS X 10.5

Similar Messages

Maybe you are looking for