Connecting HP J4580 usb thro wired USB printer server

Hi All,
I am have printing using the Airlink APSUSB1 usb1.1 printer server with PSC950 & HP 1400 series printer in the home network.
Recently I replaced the usb printer with new HP J4500 and I am unable to print thro' the network connectivity. I am able to print using the USB port.
I was told if the native Dos printing support is required for this work.
Has anyone successfuly connected a AIO J4500 USB to Printer server ?
thanks
Udaya

+would it be possible to split the USB cord coming from the Printer+
I'm afraid not. The connection must be direct to either the TC or your computer, but not both at the same time.
Apple's Printer Troubleshooting Guide will guide you through the process of setting up the printer. Unfortunately, Apple does not offer a printer compatibility list, so the only way to really know if your device is compatible is to try to see if it can be configured.
Perhaps HP would could help in this regard.

Similar Messages

Wrt610n v2 usb links as a print server?

Can the usb link on 610n be used as a print server (and not just for storage)? I know 160NL cannot be used for printing, so wondering if the 610n can.

even with an alternative firmware? then what linksys router can be used in such a way? I mean if I connect my printer to it via usb, would I be able to print on it off my, say, wireless notebook?
Message Edited by chrismcpole on 11-29-2009 09:45 PM

Problem connecting to Canon i960 through Dlink DPR1260 print server

With the help from another thread, I was able to install the driver for my Canon i960 for iMac OS X 10.7, and the printer works perfect with USB connection. However, when trying to setup the wireless connection via Dlink DPR1260 print server, I keep getting error:" An error occurred while trying to add the selected printer. Unable to communicate with the printer at this time.". I believe I followed all setup steps correct for adding printer with IP (LPD, IP address, Queue name, and selected Canon i960), as I was able to get the wireless setup for MacAir without problem. Wondering whether anyone had any tips getting iMac to work with the print server. Below are the screen shot of the setup and error.

Thank you, PAHU, this solved a problem I've been having for quite a while.
I have a Canon Pixma iP4200 connected to a DSL router (an SFR Neufbox 4, issued here in France by the operator SFR). With OS 10.6 on my daughter's MacBook Pro, connecting to the printer through the print share function on this DSL router worked fine using the printer drivers supplied through Canon and Apple. Then when we got an iMac with 10.7, impossible to get it to work. I had exactly the error shown by louiema above.
But now that I installed Gutenprint 5.2.9, I was able to configure the connection instantly, and now I can move my printer back where it belongs, and not have it sitting on the floor beside my desk.
Brilliant ! Thank you so much for sharing your experience. I will now share this solution with my francophone community.
Ken

Printing problems using a print server

I am having trouble printing across my local network to some printers. This is a mixed wired and wireless LAN.Lan works fine as the windows machines print with no problems.
Printing takes place using a Trendnet TE 100-P21 Print Server. This box is connected to my network with a CAT6 cable. It has 2 USB and one Parallel port.
The Mac can print to the parallel printer with no problem. Installation was easy and painless. It found the other two printers (the USB ones) just as easily, installed drivers, etc. It even knows when they are idle or not.
_It can print to the HP 6L, which is the only one that has a parallel connection._ (I think that must be important)
_But it can’t print to the other two, both of which have USB connections._
Here are the Queue Names that the Mac reported. (In the below notations, P3 denotes the parallel printer port, U1 the first USB port, and U2 the second USB port on the print server.)
HP6L (parallel)
URL: dnssd://PS-700AED-P3._printer.tcp.local.
*Cannon i9900* (USB)
URL: dnssd://PS-700AED-U1._printer.tcp.local.
*HP ColorLaserJet 3500* (USB)
URL: dnssd://PS-700AED-U2._printer.tcp.local.
Windows machines on the network can print to all three printer with no problem, so we know printers, print server, network and cables work. When hooked up directly to the printer (at least the HP 3500) the Mac can print as well. But not when connected via the print server.
Eventually the job times out and the HP 3500 spits out a page that reads
PCL XL error
System: KERNEL
Error: IllegalTag
Operator: Vendor Unique
Position 8
Any thoughts?

I assure you that changing print server will not fix this issue. You MUST have a CUPS driver to print to a non-postscript, not-intended-for-network printer via the standard comm protocols available in OS X and on nearly all print servers. The Gutenprint drivers included by Apple are CUPS drivers, as opposed to the old Mac-style "monolithic" drivers.
* It is true that using a postscript driver to print to a postscript printer would work for the TrendNet as well as nearly All other print servers. Postscript is the native output (well, along with "packaged postscript" = PDF) of OS X, so a postscript driver IS A CUPS driver by default.
I hope this helps you avoid the hassle of buying another brand of print server, only to find out out it is the same.

Laserjet 5P to wireless print server

I have Laserjet 5P. I want to connect to this wirelessly from my new HP laptop. Wireless print server (e.g. Netgear WGPS606) has only USB or ethernet sockets. Is it possible to connect 5P via an adaptor? Or is parallel port connection incompatible? I don't mind if print speed is reduced, just so long as I can make the connection. Please help.

I too had this problem. I'm posting this because the technique described didn't work for me. This may help someone else. I could login to the print server's admin page through Safari using its IP address. However, I could not get a straight answer from Linksys "we don't get trained on Mac" on how to make it print. Here is what I did:
Problem: difficulty printing from an iMac (wireless Airport) to a USB printer connected to a Linksys WPS54G v2.0 print server:
Under the Apple Menu, go to System Preferences>Print & Fax
Click + to add a new printer
Select IP from the top list of printer types
Under Protocol select Internet Printing Protocol - IPP
Under Address type in the IP address of the print server (e.g. 192.168.1.12)
Under Queue - leave blank
Under name - type in IP address of the print server (if not already filled in)
Under Location - leave blank
Under Print Using - select "select a driver to use" and choose the make and model of the printer connected to the print server.
Click Add
The printer should now be visible in the Print & Fax dialog box on the left hand side. Now test it by opening an application like TextEdit, type something and hit print. If the pages come out with little text or blank, you've got the wrong driver.
This worked for me, however I still don't have the functionality I had with printing from my PC based laptop (i.e. duplex, draft, normal, best, etc, B&w only). I'll probably find a way to do this later. For now I can at least be productive at work again.
Cheers,
Ralf

Riddle: Printing from iMAC to printer on networked print server

Here is a Doozy:
I am having trouble printing from my new Intel iMac over a wireless network, through an attached print server.
Here is the layout & issue:
Configuration:
I have a Windows XP PC & iMac in my office.
I have a wireless network connecting the 2.
On this network & have attached the SimpleShare 250GB network HDD, with print server
I have a Canon Pixma 800 attached via USB to the SimpleShare print server.
Issue:
The iMAC cannot print out of the printer.
The iMAC searches, finds & installs the printer (name: MP800, puts it in WORKGROUP, with queue of MP800)
It sends the job & says the job is done (looking good!).
I hear the HDD fire up (a couple clicks). But nothing prints out & the printer does not recognize a job was sent to it. (ARGHH!)
I have:
upgraded to the latest firmware on SimpleShare.
The windows PC prints fine to the printer, through this same configuration.
The iMAC prints fine to the printer when connected directly.
The iMAC reads/writes fine to the HDD itself through the network.
The internet connection works fine through this configuration.
The ONLY issue is getting a print job from the iMAC to the printer.
ANY & ALL help is appreciated, its driving me crazy...

I suspect it may be a driver issue.
It may work with the PrintFab Drivers (but these cost).
iFelix

Vista-64 and Linksys Wireless Print Server to cp1215

I have Vista-64 OS
I have a HP CP1215 Color Laserjet USB attached to a Wireless Linksys Print Server (WPSM54G).
HP website shows 2 different drivers for this printer for Vista-64:
1. Print Driver Package
2. PNP Print Driver Package
My question is, which should I be installing? The Printer is USB attached to the Print Server, but I'm printing wirelessly to the print server. So, not sure which of the two is the correct one to install.

It is probably a driver issue.
It may work with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.
Though for 10.3, this guide may also help.
Printing to a network ethernet printer (which has an IP address) from a Mac running OS 10.3.x
http://www.ifelix.co.uk/tech/3005.html
iFelix

HP Laserjet M1005 MFP won't work with a DLINK DPR-2000 Print server.

I have an HP Laserjet M1005 MFP and am trying to connect it to a DLINK DPR-2000 Print server. After the setup no matter what I do the Laserjet shows up as offline on the print server. The print server recognises it as the correct model it's just always offline aned hence I can get nothing to print.
I have done the latest firmware upgrade on the printer to 20120910.
Any ideas?

Sounds like you are having an issue getting this printer to be recognized fully on the network the print server is set up on. First of all, what all can you tell me about the network environment it is operating on? I would suggest that you try installing the PL6 drivers fro this laserjet after removing the original software and see if that gives you greater control over the machine and its functions :
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&taskId=135&prodTypeId=...
Let me know how that goes!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

Can Wired Printers Print Over A Wireless Network Through USB Connection to the Router

I have been told by supposed experts that I can use older wired printers wirelessly through USB connections on a router and I have been told by other supposed experts that it does not work. This is what I have and what I am trying to do:
In my new home I have limited space and I dedicated an unneeded closet to office and computer stuff. I rebuilt the closet with shelves and drawers and I added power outlets and phone and coax jacks. I use a wireless HP Pavilion laptop (about a year old) running Vista anywhere in the house. The computer closet has an HP C309 wireless printer, an HP D4260 wired printer, and an Epson Photo R280 printer. I can't get cable or FIOS right now, so I am running the internet on DSL at 3.0MB. That signal goes into a router supplied by Verizon and I jump it over to a Netgear RangeMax Wireless-N Gigabit Router with USB.
There is no particular reason to have the Netgear router in the lineup except that that two networking "experts" (their term -- I have no frame of reference to judge them) said I could connect the HP D4260 and the Epson printer via USB cables to the Netgear router and then send documents to them over the wireless network. When I have these two older printers connected to the Netgear router, the network does "see" them and shows them as network printers. However, no documents ever arrive at them.
As an author, I print thousands of pages a year in draft mode for review and I would prefer to use the HP D4260 as it is far cheaper to operate and it prints far faster and quieter than the HP C309. Connecting it directly to the laptop is not convenient as it is nowhere near where I use the laptop.
Is there anyway to get at least the HP D4260, and preferably also the Epson R280, to print wirelessly via the network by connecting them to the USB port on the Netgear router? If not, I will have to buy a cheap, fast wireless printer, something I really don't want to do.
Thanks.

You did not give the model number of your Netgear, but I am sure that some Netgear routers with USB support USB hard drives and printers, where some models only support USB hard drives.
Either provide your model number or look at your documentation to see if your router actually supports printing.
Also, since you essentially have two routers in your home, make sure that ALL devices (printers and computers) are connected to the Netgear router, not to your DSL router.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How can I share external devices connected to my Mac mini via USB on a wired network.

Own a Mac mini with Mountain Lion. Purchased the server app. The Mac mini is connected to a wired network with Mac’s and Windows machines. I have an external hard drive and 2 printers connected to the MAC mini via USB. I would like to share these devices with other computers on the wired network. Although I have attached similar devices with an airport extreme in the past, I am unable to use a wireless router in this case. Any suggestions on making this work with my current setup?

You don't really even need server app to do this. Simply go to System Preferences | Sharing and turn on both File & Printer sharing. Then, for example, the printer (not relevant what connection it has but obviously USB is fine) will be available to everyone on the wired network.
That's all there is to it - unless I missed/misunderstood something re: your setup which seems very straightforward.

How do I scan and email documents on my canon mx870? I have a MAC OS X 10.7.5 and it is connected with a usb cable to the printer. Thank you so much!

How do I scan and email documents on my canon mx870? I have a MAC OS X 10.7.5 and it is connected with a usb cable to the printer. Thank you so much!

Hi, I have 10.6.8 and an HP printer so it may be slightly different but I'll give it my best shot:
Go to System Preferences.
Click on "Print & Fax"
Near the top of that page you should see "Print" and "Scan" options. Click "Scan"
A button appears that says "open scanner"
The settings are different between the different scanner models so I'm not sure what the next window will look like, but it should be pretty straightforward from there. It will scan to a JPEG image which you can attach to an email. I hope that helps! Let me know if there's anything ense I can help with.

How connect 2 Mini's to one usb printer

Can a double usb plug at the printer be used with a separate usb cable from each printer (separate Mini's different systems on opposite sides of the room with printer inbetween)
or is it necessary to have a powered usb hub at the printer to do that?

In order to get M3 to recognize the HP laser printer HL 2040 attached to M2:
From M3 downloaded printer driver. installed it.
However, unlike other printer drivers there are sequences required before it will even show up. I followed those procedures as described by HP which entailed having to connect the PRINTER directly to the Mini3 - then HAD TO disconnect AC and USB cables from printer and connecting the USB cable DIRECTLY to M# . THEN restart and finally it appeared as a CONNECTED printer.
[that seems to have defeated the situation of finding it as a remote via the M2]
The printer was then disconnected from M3 and placed back by M2 and connected to M2. Both Mini3 and Printer were turned off and restarted with the printer reconnected to Mini2.
On m3 In the "add printer" window where the other printers connected to the Mini 2 are shown, it does NOT appear. The other two are listed as Bonjour Shared
I think that direct connect (which HP required to 'see' the printer) confused the Mini3 running 10.6.8 - the one t
On M3 the ADD Printer panel does not show it just lists the other two.
On M3 the Print and Fax Preference shows it as (red dot) offline last used
and under that is the Deskjet as (green dot) idle
so it's obvious the M3 is 'seeing' it in two different ways.. one as connected, but not selected for the Laser
printer and no way to get it to show u p.... do suppose it's necessary to REMOVE it from the Print and Fax preferences panel?

I have an iPad 3 if I use the USB cable can I print to any printer no connected to a computer

I have an iPad 3 if I use the USB cable to any printed not connected to a computer will I be able to print

No. iPads print only wirelessly. You need an Airprint capable printer,
or a network printer reachable wirelessly or a printer that can make
its own ad hoc wireless network. There is no USB connection on an
iPad.
What type (manufacturer & model) are you trying to print to?

HT3500 I cannot connect Macbook (OS 10.6.8) to Epson XP 400 wirelessly. It works when connected to a USB cable. Both printer and Mac are on the same network and Norton/symantic is OFF. The Epson will not show up in "add printer". is off.

I cannot connect my Macbook to Epson printer XP 400. Both are on the same network and Symantic anti virus is disconneted.
Add printer does not find the Epson. All works when I use the USB cable.

Further information on my question about the epson wireless printer and macbook.
It seems that the epson xp-400 works wirelessly only with 802.11n wireless network not with 802.11g or earlier.
Does anyone else know about this. I read it on the epson support site for epson xp-400.
Also epson xp-400 will not work wirelessly if it is already connected to a computer with a USB cable.

Can't connect to printer via usb print server

So I've tried to connect to an EPSON stylus printer from my iMac via a print server with no success.
Here's some info to help focus the questions/help:
iMac running Mavericks, Epson SP R200 printer, Belkin Play router, Toshiba Satellite laptop, Level1 USB print server
Win8.1 laptop prints via print server just fineso IP, port, firewall issues on router/print server side are ruled out.
I have the fire wall off on the iMac
I've quadruple checked IP and subnet numbers of iMac to rest of network, and they all jive.
I can pull up the config page of the print server via Safari on the iMacso connectivity is there
I previously had the printer attached directly to the iMac, and successfully printed.
I've tried to add the printer via IP > LPD method AND Advanced > Windows printer via spoolss
I can get as far as adding the printer, but as soon as I attempt to print a test page the printer has a "filter" error, or some "color" error, the job just goes into nothingness, or the job just sits there and the que is paused.
This is very frustrating to put it nicely.
-Vince

What driver are you using? - Don't know if you remember, but you had to be using Gutenprint, because Epson's driver for USB-only printers, only works via USB.
http://gimp-print.sourceforge.net/MacOSX.php

Connecting HP J4580 usb thro wired USB printer server

Similar Messages

Maybe you are looking for