Connecting HP LaserJet 3300 to Wireless Network

I want to connect a HP LJ 3300 to a wireless network (via ethernet link) using a Netcomm  NP 3680 MF Printserver.
Netcomm compatibilty list indicates a HP LaserJet 3330 as compatible.
Does the HP LJ 3300 have enough similarity with the LJ 3330 to make it also compatible?

Dear Happy-to-Help,
I appreciate you logging in to help. I shall give this a shot in the next couple of days when I have more time and let you know how it goes.
I have been quite frustrated by the fact that HP says if the HP Laserjet P1102W has worked fine with Snow Leapord and one upgrades to Mountain Lion, all the drivers will be automatically upgraded/updated (or whatever the term).  That has not been the case at all.   It took quite a bit to even get my computer and printer to talk to one another via a USB connection—with none of the functions of the printer (as noted above) working properly to this day.
I hope your suggestion works.  Will be back in touch to let you know. 
Ani

Similar Messages

  • Connecting HP Laserjet P1102W to wireless network (then getting drivers!)

    Hi,
    My macbook pro and HP LASERJET P1102W seemed to be communicating just fine when I had snow leapard.  Post update to Mountain Lion, problems.
    I have gotten the printer to work when connected via USB, however not consistently.  (Often it cannot recognize when paper tray is filled, cannot do two sided printing and has other issues perhaps connected to the fact that software is missing?) 
    I have read the documentation on HP site, noting that the only way to install drivers is via a network connecton and airprint which requires a network connection.
    Not sure this is the right place to ask this, but I will for now:
    How do I connect my printer to my network, which is a new home network as I just changed from DSL to Cable? 
    Note:  I had not previously ever connected my printer to my wireless network and set it up to work with Airprint, though that is one of the reasons I bought it.  
    Once I do connect the printer to my wireless network, perhaps then I can try to follow the steps on the HP site   http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03425022&cc=us&dlc=en&lc=en &os=4142&product=4110396&sw_lang=
    If anyone has experience with the above, I would love to hear it!
    Final question:  Is plugging the printer into the back of the new cable modem via ethernet or USB perhaps a way to put it on the wireless network?  Not a convenient location, but if only alternative, I would try it.
    THANKS!
    Ani

    Dear Happy-to-Help,
    I appreciate you logging in to help. I shall give this a shot in the next couple of days when I have more time and let you know how it goes.
    I have been quite frustrated by the fact that HP says if the HP Laserjet P1102W has worked fine with Snow Leapord and one upgrades to Mountain Lion, all the drivers will be automatically upgraded/updated (or whatever the term).  That has not been the case at all.   It took quite a bit to even get my computer and printer to talk to one another via a USB connection—with none of the functions of the printer (as noted above) working properly to this day.
    I hope your suggestion works.  Will be back in touch to let you know. 
    Ani

  • LaserJet 4050N and Wireless Network

    I need to connect a LaserJet 4050N network printer to a wireless network without running a ethernet cable from the router to the printer, what device would I need to use in order to connect the printer to the wireless network?
    Thanks

    I didn't see any Laserjets on the compatibility list here. Therefore, I'm not sure our wireless adaptor will work for you.
    If you already have a wireless-network, you might just look for a media-bridge or a wireless-bridge to connect the Laserjet to the network.
    Regards / Jim B / Wireless Enthusiasts
    ( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
    + Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

  • Problem connecting MBP to established Linksys wireless network

    just got MBP 2.16 (my first mac!). Having trouble connecting to my established linksys wireless network. I have the BEFW11S4 (V.2) etherfast wireless access point + cable router with 4 port switch. Currently have 128 encryption enabled. The linksys router is broadcasting its ID (I can see "linksys" on my mac) but it seems to not accept the password. I tried entering the 26 WEP key, the passphrase, the WEP key in quotes, the WEP after a $ sign... all to no avail. please APPLE community, help out a mac noobie before i have to turn back to Bill Gates....
    Dell Dimension 8200, MBP 2.16   Mac OS X (10.4.6)   2 GB SDRAM

    To find the IP address or the status, go to system Preferences then network. It will show you the status of any internet connections. You should see one for Airport, it will either show a green light and say 'Airport is connected to the internet' (or something like that) or a red light and say 'Airport is is active but not connected' (something like that). If you double click on Airport or click 'Configure' you will see tabs, click on TCP/IP and it will show all of your details including your IP address.
    As for the other, it always refers to wireless networks as 'Airport' and that response is the standard response from a Mac.
    the password should be typed in the hex section, not sure about the $ sign. I've never had to do that before. But if you can't connect even with no encription then I would think it is another problem. I would turn off the encription until you can at least get connected and then you can worry about the security afterwards.

  • I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network.

    I can't make my iphone 4 forget the hpsetup network which keeps showing up at work. My phone won't automatically connect to my company's wireless network. I have to reselect it everytime I come to work.

    Settings/General/Reset - Reset network settings will "forget" all WiFi networks so you can select them again.
    If the problem with your company network is not solved by doing this, are there multiple sites that have the same network name for the company network? Or is it the default network name for the router type (e.g., DLINK, LINKSYS, etc)? If so, this is what is causing the problem and there is no solution other than convincing IT that it is a bad idea to have duplicate network names.

  • Graphite Connects to Someone Else's Wireless Network

    When I startup my eMac (10.4.8) I sometimes cannot connect to the internet via Airport. I discover, upon launching Internet Connect, that I am connected, but not on our wireless network. Instead, Airport shows me connected on something called "linksys" (which I assume is a neighbor's wireless network), and the signal is very weak. I can switch to our network via Internet Connect & all is well, but it's a hassle having to go through this every time. It used to be that I'd immediately be connected to our own wireless network & Airport upon startup. Help! How can I "teach" my Airport to always connect via OUR network & not "linksys"???

    Try each of the following, in order, until resolved:
    1. Run the Disk Utility to repair Disk Permissions.
    2a. Delete Preferred Network(s)
    - System Preferences > Network > AirPort > Configure
    - In the "By default, join:" pull-down menu, select "Preferred networks"
    - Delete the network(s) you regularly use from the list
    2b. Delete AirPort Keychain Entries
    - Launch the "Keychain Access" application located in Applications/Utilties.
    - Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    - Restart, or log out then back in.
    2c. Add Preferred Network(s)
    - System Preferences > Network > AirPort > Configure
    - In the "By default, join:" pull-down menu, select "Preferred networks"
    - Add the preferred network(s) using the "+" button.
    - Restart or log out then back in.
    3. Create a New User Account
    - Create a new user account.
    -- System Preferences > Accounts
    -- Click "+" to add a new account
    - Log off, then log back on with the new user account.
    - Try connecting with the AirPort.

  • Connecting HP Officejet 6100 to wireless network with OSX 10.9.5

    Running OSX 10.9.5.
    I'm trying to connect HP Officejet 6100 to wireless network without HP software since the software claims it is not compatable with my OS. 
    The printer works fine when connected via USB.

    Hi @dj2thew,
    Thank you for visiting the HP Support Forums! I see you are trying to add your HP Officejet 6100 to your Mac running the Mavericks 10.9.5 Operating system.
    Because you are using the Mavericks OS X you must install the printer using the Apple Updates. Please click on the link below, this document explains how to install the print driver on a Mac for a USB or a network connection. The OS X v10.9 Mavericks driver for your printer is available through Apple Software Update (ASU). Additionally, you can perform basic print jobs using AirPrint without installing a driver.
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    Once you have installed the OJ 6100, you may notice the features you once had are limited or there are workarounds, for scanning with or without HP Software see below:
    How to Scan: OS X v10.9
    I hope this helps!
    Thanks again,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Unable to connect LaserJet CP1525nw to Wireless Network

    I have new Ubiquity router. It is broadcasting our SSID. I am trying to connect a LaserJet CP1525nw to the wireless network. I cannot figure out a way to enter the SSID on the printer. The Ubiquity router does not have a WPS button, so that is an option. I did attempt to use the USB connected device, but the installer would time out, always providing the same error, that it could not connect to the printer (this in spite of the fact that the printer is on and connected via USB).

    Hi Kfran615,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having some issues when attempting to install the printer.  So I can better assist you,please respond with which Operating System you are running.
    Which Windows Operating System am I running?
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Connecting MacBook to printer via wireless network

    I have a wireless network via cable modem with some PCs attached and a printer but am having trouble connecting my new MacBook to the HP LaserJet 2100 printer via wireless. I do not have airport express and not sure I need it to have the MacBook print to this printer. Please advise.

    Hi topgunner,
    How is the printer connected? Are you trying to share it via a PC through wireless? Or is it connected directly to a router/hub that is enabled for printer sharing?

  • Can't Connect OfficeJet 7410 to new wireless network - used to work on old one

    Hi, I'm on a Mac OS.  I just upgraded my wireless network to use an airport extreme.  I have a verizon fios router - same as I had when it used to connect.  The only change was adding the airport extreme.  Now, the officejet 7410 all-in-one will not connect to the wireless connect.  It SEES the name of the network, and asks me for a WEP Key, which it didn't used to do.  It used to ask me for the network password.  I found the WEP key on the router and it acts like it is trying to connect but takes a long time and then gives me an error.  One time it never gave me an error and seemed like it had worked, but was not connected.  It just gave up. 
    My configuration page indicates offline with no active connection and wireless status disconnected.  
    I restarted everything with no change.  I don't know why it would be asking me for a WEP key this time and then not accept it but that was the first indication that something was different when it didn't ask me for the network password.
    Also, as a separate issue but related.  In trying to fix this, I deleted my drivers to reinstall and see if I started over that it would work.  That created another problem in that now it seems that HP no longer supports a driver for this printer.  Is that even possible?  It's not that old.  It says it does not exist on the software update.  Please help!

    Hi YSJA,
    I'm sorry to hear you've had problems accessing your Officejet 7410 since adding the AirPort Extreme to your home network.
    I have included a link to HP's Wireless Printing Center troubleshooting section. It has section, "Was anything changed or updated on your router recently?" that has detailed steps to help you resolve the issue.
    Wireless Printing Center Troubleshooting
    http://www.hp.com/global/us/en/wireless/troubleshooting.html
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How to Connect Airport Express to Existing Wireless Network (Client Mode)

    I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save someone else the agony we went through.
    So here's the situation:
    Say you already have your own home network set up, and all you want is to be able to use AirTunes to play music off iTunes into your speaker system. And, you don't need the printer sharing capability nor creation of another wireless network (2 of the features of Airport Express). Then this solution is for you - read on.
    Unfortunately, Apple's user manual is very unclear how to connect Airport Express to your own network. When you look at the picture diagram they provide, they show Airport Express picking up its signal from another Apple-oriented base. This can make you think you need to buy another piece of hardware to make it work. DON'T If you read through the manual, the Support section here, etc., you will hear lots of talk about "Client Mode" - and that this is the only way to get it to work. Nice - but no one really tells you how to set up the Airport in client mode.
    Do yourself a favor, toss that user manual aside and run these steps.
    (Note: These directions assume your DSL/Cable Modem is hooked up to a wireless router or acts as its own wireless router)
    1. Get a cat5 Ethernet cable (anything but an orange cable - that's a crossover cable) like you would use to connect your PC to your router to pick up the Internet.
    2. Connect the Ethernet cable to the router on one end, and to the Airport Express unit on the other end.
    3. Plug in your Airport Express unit to the wall (this will not necessarily become its permanent location - you will be able to move it later). The light will glow solid Amber for about 30-45 seconds while it starts up, then blink Amber. At this point, the unit is ready to operate.
    4. Install the CD to the PC where your iTunes music is stored. This should be painless. Once you open the program, it should detect the Airport unit.
    5. At this point, the on-screen wizard will present you with your options, and walk you through the setup. This is much like the user manual describes - and you should be good to go form here forward.
    Some pointers:
    - When asked if you want to create a new network, join an existing network, or connect via Ethernet, choose the middle option for joining an existing network. You will need to know the name of your network, the password to connect to the network (if present), and the type of encryption used on the network (e.g. WEP, WPA, etc.). Side note, WPA is recommended, as it is a higher level of security than WEP. You will be able to configure the Airport Express unit to automatically login to your network.
    - I would recommend, when creating a password for the Airport Express unit, use the same password as your network, to avoid confusion.
    6. The very last step will ask you to save the settings to the Airport Express. Here's the kicker - when you save the settings, you are TRICKING the Airport Express into no longer acting as a network broadcaster, but instead being a "slave" to your own network. What do I mean? You will lose the connection from your PC to the Airport Express - an error message will pop up telling you the unit can no longer be found. While you might think you did something wrong, you actually were successful!
    7. Unplug your Airport Express, and disconnect the Ethernet cable from your router and the Airport unit. This will no longer be needed.
    8. Go to your desired location where you want to plug in your Airport Express unit. Before plugging it in, connect your Audio cable from the Airport Express to your audio receiver. Once that is connected, then plug in the Airport Express unit. The light will glow solid Amber for 30-45 seconds while it loads, and then will blink Amber for a brief period of time before turning solid GREEN. When this happens, you have successfully connected the Airport Express to your home network!
    9. Go back to your PC with iTunes. Open the Airport software - you should now have a listing for your Airport Express unit in the upper left. Click on this, and the wizard will guide you through connecting - you will need the password you created for the unit. You only need to go through this wizard once, and when finished, the software will tell you that can now use iTunes with your Airport unit.
    10. Open iTunes. On the lower right, you will see a dropdown for Speakers, and it should be defaulted to My Computer. Click on that drop-down, and you will see the name of your Airport unit. Click on that name, and now your music will broadcast to the Airport unit!
    11. Play a song in iTunes. Go to your audio receiver, and connect it to the channel for your external connection to the Airport Express unit. You should hear your music from iTunes. CONGRATULATIONS! =)
    I hope these instructions were helpful - I am happy to answer any questions, so feel free to contact me, *******************@*****.**.
    <Edited by Moderator>

    Thanks for the detailed directions. You are absolutely correct in stating that people should toss the user manual; it's pretty worthless. I have had a problem setting up my new Airport Express as I have described in an earlier post - http://discussions.apple.com/thread.jspa?threadID=1839873&tstart=45
    One quick question - does using your setup process set the AE up as part of a distributed network where the AE is acting as a wireless router where it is extending the range of your network? Or, is it simply a wireless connection to your stereo for iTunes? I am interested in having both, since my AE will be at the other end of the house from the main wireless router.
    Thanks

  • Setting up HP Officejet 6500A; not sure how to connect to web w/ home wireless network

    I have a small home wireless network.  I set the printer up today but it says that I must connect to the internet (fax part is working).  The only desktop I have, I keep off most the time and just use my laptop (which is for work so I can't set the printer up to this).
    Is there a way to connect the printer directly to my router?  They are only a few feet from one another; however, I have no clue how to do it and the instructions manual didn't tell me much.  Do I need a phone line?  What would I use to connect the two?
    This question was solved.
    View Solution.

    Use an Ethernet cable, available in any tech store, online or even Target will have them.
    Plug it into the back of the printer and router.  You should be able to add the printer to your laptop.  Let me know what operating system you have and I can help.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Connecting AX to mixed wired/wireless network

    I've got a networking issue that I can't seem to solve and could use some help. I have a old house that, while not terribly large, has very thick, radio opaque walls.
    I use a cable modem connected to an Airport Extreme which creates a wireless network within the house (which I extend around the house with a couple of Airport Expresses). I also have two computers wired via some VERY long CAT5e ethernet cables to the same Airport Extreme - a MacMini in my kitchen and a MacPro in my office (which is detached, across the yard from the main house). Right now I also use an Airport Express in my office to extend my wireless network for my clients who come to the office with laptops, etc. and also for my iPad. But the wireless signal is so weak out in the office that even with the Airport Express repeating it, it's very slow and spotty.
    So, I bought an Ethernet switch, thinking I could split the Ethernet coming into the office and run one directly into the MacPro and the other into the Airport Express. I figure it's not hard to configure the Airport Express to create a NEW wireless network with the data coming in via Ethernet. However, what I want to do is create a node on my EXISTING wireless network (so my devices can see each other), just using data coming from the ethernet port instead of repeating the weak wireless signal that's reaching the office from the house. Is this possible? If so, how do I do this?
    By the way, I have both old (G) AX's and well as a couple of new (N) ones. Right now the new ones are in the house and an old one is in the office, but I could move things around if it made things work.
    Thank you.

    Hey Bob,
    I set up the Airport Express as you described and, while it worked at first, I'm running into some difficulties. Basically, the AX unit tends to disappear from the network after about an hour. It's very strange because, like I said, it works at first and I have great signal out in the office then... poof!... it's gone. And it doesn't just disappear from the wireless network. Both my MacPro and MacMini (which are connected via ethernet) can't see it either. I have to unplug/replug the unit to get it to show up again.
    I thought it might be the particular unit. But I've tried two AX (G) units and my old AirPort Extreme (G) UFO shaped router all in the same bridge configuration and they exhibit the same behavior -- working at first then dropping off the network and requiring a reboot to reappear.
    Do you have any thoughts? I'd be most grateful.

  • Cannot find instructions on how to connect printer to a new wireless network.

    HP 4500 series was connected to my wireless network successfully for a year.  Upon moving and obtaining  new wireless network I cannot find instructions for changing wireless network for printer to recognize.

    Hi,
    Just connect printer to a new Network, like a brand new printer. Here are the manuals (many parts).
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Connecting Printer to a new Wireless network (changed network provider)

    I have recently changed broadband provider and I am struggling to connect my printer (HP Deskjet 3050A All in One Printer) to my new wireless network.
    I have clicked on HP within programs and tried to set up the printer but my laptop is not recgonising that the printer is connected via the cable so its not picking up the printer in order for me to set it up as a new device.
    Help please??

    jwatson84
    Welcome to the HP Community Forum.
    The easiest way to deal with this may be to install (reinstall) the Full Feature Software for the printer onto your computer.
    The installation procedure includes a connection process that might resolve the issue for you without adding any more stress to the situation.
    Along with the basic instructions and install videos, you can find lots of helpful Troubleshooting / Howto help at the printer's website support pages.
    TIP:  You do want to disconnect the USB cable from the printer before you install / reinstall the software. 
    General Instructions to Install the Printer Software
    Reminder:
    In most cases, the Solution Center has been replaced by the Printer Assistant.
    The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
    Windows Operating System:
    Create Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    Open HP Drivers & Downloads
    Enter your Printer Model information
    Select your Printer from the “Results” list
    OR
    Open HP Deskjet 3050A e-All-in-One Printer series - J611
    Select your Printer from the “Results” list
    Enter your Operating System in the Drop-down menu
    Click NEXT and Scroll down
    Look for category Driver - Product Installation Software
    Select the Basic Driver, e-print, or Full Feature Software
    Save the *.exe installation package(s) on your computer
    The file(s) will likely save to the "Downloads “folder.
    Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
    If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
    NOTES: 
    Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
    Scroll the video list back and forth until you find the video that most closely matches your situation.
    If using a USB connection: Download and install the driver software before connecting a USB cable.
    Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
    After the initial installation is complete and working, check / install Category - Update
    There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer.  Be sure to take an extended look at what is available.  Bookmark the page.
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Kind Regards,
    Dragon-Fur

Maybe you are looking for