Connecting HR user issue

I'm trying to connect the HR user to be able to view the schema objects owned by the user.
SQL> connect HR/Passwd
ERROR:
ORA-28000: the account is locked
Why can't HR connect, I gave it the same attributes as SYSMAN. Also, if I'm in SYSMAN I can do the SQL> alter session set current_schema=hr; but I still can't see the schema objects trough SELECT * from USER_OBJECTS; and my SHOW user; always comes back as either sys or syman. Please tell me what I'm doing wrong.
Here's the output from EM...
General
Name     HR
Profile     DEFAULT
Authentication     Password
Default Tablespace     USERS
Temporary Tablespace     TEMP
Status     UNLOCK
Default Consumer Group     None
Roles
Role     Admin Option     Default
AQ_ADMINISTRATOR_ROLE     N     Y
AQ_USER_ROLE     N     Y
AUTHENTICATEDUSER     N     Y
CONNECT     N     Y
CTXAPP     N     Y
DBA     N     Y
EJBCLIENT     N     Y
EXP_FULL_DATABASE     N     Y
RESOURCE     N     Y
System Privileges
System Privilege     Admin Option
ACCESS_ANY_WORKSPACE     N
ALTER SESSION     N
CREATE DATABASE LINK     N
CREATE SEQUENCE     N
CREATE SESSION     N
CREATE SYNONYM     N
CREATE VIEW     N
UNLIMITED TABLESPACE     N
Object Privileges
Object Privilege     Schema     Object     Grant Option
EXECUTE     SYS     DBMS_STATS     N

The hr user account is unlocked, however I still get this error: ORA-01017: invalid username/password; logon denied
I know it's valid because all my accounts have the same password.
Any ideas?

Similar Messages

  • Reg:Screen output without connection to user.

    Hi All
    I am having an issue when I open Form 16 application in ess role under benefits and payments  subfolder .
    But I am getting an Critical error as shown below .
    Screen output without connection to user. error key: RFC_ERROR_SYSTEM_Failure.
    Can any please guide me how to resolve this error.
    As its very urgent requirement ..
    Thanks & Regards
    Deepika
    Edited by: deepika_indian on Feb 9, 2012 7:49 AM

    Hi,
    Please check out in the Infotype 105 Sub Type 0001, Is there any user maintained there, As it is
    required.
    I could see a possible problem, in the past we've
    encountered issues like this, but relevant to environments using Central User Administration(CUA). Please refer to SAP Note no:350619. The note makes following changes to the table t77SO by changing the value of TRSPCORR to ''X'' or 'T'. Please verify if the note is relevant to your environment if so kindly apply.
    Please look at this [Help|http://forums.sdn.sap.com/thread.jspa?threadID=1038064] and [Help-1|http://forums.sdn.sap.com/thread.jspa?threadID=1925679]
    Hope This is Help full for you!!!
    Best Regards
    Vijay K

  • ESS Persoanl Data Error(Screen output without connection to user)

    Hi All,
            When i am trying to Save my data in my ESS----->Personal Info -
    >Personal Data, i am getting below error, any body know how to resolve this issue, please let me know.
    Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE:
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.per.fc.persinfo.FcPersInfo.save(FcPersInfo.java:440)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.save(InternalFcPersInfo.java:770)
         at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.save(FcPersInfoInterface.java:186)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.save(InternalFcPersInfoInterface.java:275)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.save(InternalFcPersInfoInterface.java:435)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.onEvent(VcPersInfoReviewNavi.java:213)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.onEvent(InternalVcPersInfoReviewNavi.java:171)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNaviInterface.onEvent(VcPersInfoReviewNaviInterface.java:115)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface.onEvent(InternalVcPersInfoReviewNaviInterface.java:124)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface$External.onEvent(InternalVcPersInfoReviewNaviInterface.java:200)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:533)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:951)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1114)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.next(VcPersInfoReviewNavi.java:227)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.next(InternalVcPersInfoReviewNavi.java:175)
         at com.sap.xss.per.vc.reviewnavi.ReviewNaviView.onActionNext(ReviewNaviView.java:153)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalReviewNaviView.wdInvokeEventHandler(InternalReviewNaviView.java:173)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
         at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Save(HRXSS_PER_MAC.java:478)
         at com.sap.xss.per.model.mac.Hrxss_Per_Save_Input.doExecute(Hrxss_Per_Save_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 64 more
    and after that i went to ST22 Transaction Code in my ECC System i found two types of DUMP errors,
    the below are those details.
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
    Exception              CX_SY_REF_IS_INITIAL
    Date and Time          09/09/2008 08:19:16
    Short text
    Access via 'NULL' object reference not possible.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLHRXSS_PER_MAC" had to be terminated because it
    has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
    procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", nor was it propagated by a RAISING
    clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
    How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED_NO" "CX_SY_REF_IS_INITIAL"
    "SAPLHRXSS_PER_MAC" or "LHRXSS_PER_MACU04"
    "HRXSS_PER_CLEANUP"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "HRXSS_PER_CLEANUP" "(FUNCTION)", or its possible occurrence must be declared
    in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
    System environment
    SAP-Release 700
    Application server... "ERPDEV01"
    Network address...... "10.88.1.6"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "ERPDEV01"
    Database type..... "MSSQL"
    Database name..... "DE1"
    Database user ID.. "de1"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Oct 23 2007 00:33:51"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
    Patch level. 133
    Patch text.. " "
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
    NT 6.0"
    Memory consumption
    Roll.... 16192
    EM...... 4189840
    Heap.... 0
    Page.... 0
    MM Used. 1229856
    MM Free. 2957360
    User and Transaction
    Client.............. 210
    User................ 937048
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "68211f907e6911ddbfef005056833439"
    Program............. "SAPLHRXSS_PER_MAC"
    Screen.............. "SAPMSSY1 3004"
    Screen Line......... 2
    Information on caller of Remote Function Call (RFC):
    System.............. "########"
    Database Release.... 645
    Kernel Release...... 645
    Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchron and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Name.." "
    Client.............. "###"
    User................ "############"
    Transaction......... " "
    Call Program........." "
    Function Module..... "HRXSS_PER_CLEANUP"
    Call Destination.... "<unknown>"
    Source Server....... "ERPDEV04"
    Source IP Address... "10.88.1.9"
    Additional information on RFC logon:
    Trusted Relationship " "
    Logon Return Code... 0
    Trusted Return Code. 0
    Note: For releases < 4.0, information on the RFC caller are often
    only partially available.
    Information on where terminated
    Termination occurred in the ABAP program "SAPLHRXSS_PER_MAC" - in
    "HRXSS_PER_CLEANUP".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 13
    of the (Include) program "LHRXSS_PER_MACU04".
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "HRXSS_PER_CLEANUP" "(FUNCTION)", but it was neither handled locally
    nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLHRXSS_PER_MAC "; its source code begins in
    line
    1 of the (Include program "LHRXSS_PER_MACU04 ".
    Source Code Extract
    Line
    SourceCde
    1
    FUNCTION hrxss_per_cleanup.
    2
    3
    ""Local interface:
    4
    *"  EXPORTING
    5
    *"     VALUE(MESSAGES) TYPE  BAPIRETTAB
    6
    7
    8
    CALL METHOD mac_adapter->cleanup
    9
       IMPORTING
    10
         messages = messages.
    11
    12
    TRY.
    >>>>>
    CALL METHOD xss_adapter->cleanup
    14
    15
    CATCH CX_HRPA_VIOLATED_ASSERTION .
    16
    ENDTRY.
    17
    18
    ENDFUNCTION.
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    0
    SY-INDEX
    2
    SY-TABIX
    0
    SY-DBCNT
    0
    SY-FDPOS
    0
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    SY-UCOMM
    SY-TITLE
    CPIC and RFC Control
    SY-MSGTY
    SY-MSGID
    SY-MSGNO
    000
    SY-MSGV1
    SY-MSGV2
    SY-MSGV3
    SY-MSGV4
    SY-MODNO
    0
    SY-DATUM
    20080909
    SY-UZEIT
    081916
    SY-XPROG
    SAPLHRXSS_PER_MAC
    SY-XFORM
    HRXSS_PER_CLEANUP
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    4 FUNCTION     SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                      13
    HRXSS_PER_CLEANUP
    3 FORM         SAPLHRXSS_PER_MAC                   LHRXSS_PER_MACU04                       1
    HRXSS_PER_CLEANUP
    2 FORM         SAPMSSY1                            SAPMSSY1                               85
    REMOTE_FUNCTION_CALL
    1 MODULE (PBO) SAPMSSY1                            SAPMSSY1                               30
    %_RFC_START
    Chosen variables
    Name
    Val.
    No.       4 Ty.          FUNCTION
    Name  HRXSS_PER_CLEANUP
    MESSAGES
    Table[initial]
    %_DUMMY$$
    2222
    0000
    0000
    0000
    No.       3 Ty.          FORM
    Name  HRXSS_PER_CLEANUP
    SYST-REPID
    SAPLHRXSS_PER_MAC
    5454455555545544422222222222222222222222
    310C82833F052FD1300000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    %_%_MESSAGES
    Table[initial]
    No.       2 Ty.          FORM
    Name  REMOTE_FUNCTION_CALL
    %_DUMMY$$
    2222
    0000
    0000
    0000
    SY-REPID
    SAPMSSY1
    5454555322222222222222222222222222222222
    310D339100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    SYST-REPID
    SAPMSSY1
    5454555322222222222222222222222222222222
    310D339100000000000000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    HEADER
    000000000000
    000000000000
    TYPE
    3
    0000
    3000
    SY-XPROG
    SAPLHRXSS_PER_MAC
    5454455555545544422222222222222222222222
    310C82833F052FD1300000000000000000000000
    0000000000000000000000000000000000000000
    0000000000000000000000000000000000000000
    RC
    0
    0000
    0000
    SY-XFORM
    HRXSS_PER_CLEANUP
    455555545544444552222222222222
    82833F052F3C51E500000000000000
    000000000000000000000000000000
    000000000000000000000000000000
    %_SPACE
    2
    0
    0
    0
    No.       1 Ty.          MODULE (PBO)
    Name  %_RFC_START
    %_PRINT
    000                                                                                0###
    2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    RFCTYPE_INTERNAL
    3
    0000
    3000
    Internal notes
    The termination was triggered in function "method_call_iref"
    of the SAP kernel, in line 2207 of the module
    "//bas/700_REL/src/krn/runt/abmethod.c#8".
    The internal operation just processed is "METH".
    Internal mode was started at 20080909081916.
    Active Calls in SAP Kernel
    Lines of C Stack in Kernel (Structure Differs on Each Platform)
    SAP (R) - R/3(TM) Callstack, Version 1.0
    Copyright (C) SAP AG. All rights reserved.
    Callstack without Exception:
    App       : disp+work.EXE (pid=3864)
    When      : 9/9/2008 8:19:16.162
    Threads   : 2
    Computer Name       : ERPDEV01
    User Name           : SAPServiceDE1
    Number of Processors: 4
    Processor Type: AMD64 Family 15 Model 65 Stepping 2
    Windows Version     : 5.2 Current Build: 3790
    State Dump for Thread Id d90
    FramePtr         ReturnAd         Param#1          Function Name
    0000000007d1bb20 0000000077d704bf 000000003879a800 ntdll!ZwWaitForSingleObject
    0000000007d1bbc0 0000000001722981 0000000000000180 kernel32!WaitForSingleObjectEx
    0000000007d1be10 00000000006110c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
    0000000007d1be40 0000000000af8e9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
    0000000007d1be90 0000000000afe0c0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7091)]
    0000000007d1c870 000000000081768a 0000000001adae28 disp+work!ab_rabax [abrabax.c (1231)]
    0000000007d1c8d0 0000000000830b12 0000000000000000 disp+work!method_call_iref [abmethod.c (2215)]
    0000000007d1ca50 0000000000a0bac7 0000000000000008 disp+work!ab_extri [abextri.c (554)]
    0000000007d1caa0 0000000000ac830c 0000000000000008 disp+work!ab_xevent [abrunt1.c (281)]
    0000000007d1cb30 000000000066f348 0000000000000008 disp+work!ab_dstep [abdynpro.c (492)]
    0000000007d1ccb0 0000000000672f1d 000007fe571fc890 disp+work!dynpmcal [dymainstp.c (2403)]
    0000000007d1cd40 000000000067291a 000007fe571414a0 disp+work!dynppbo0 [dymainstp.c (543)]
    0000000007d1cdf0 00000000006320d5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
    0000000007d1fc30 00000000004d7393 0000000000000003 disp+work!dynpen00 [dymain.c (1629)]
    0000000007d1feb0 000000000042d5a6 000000000a595080 disp+work!TskhLoop [thxxhead.c (4470)]
    0000000007d1fee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1121)]
    0000000007d1ff10 00000000019c7dd1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
    0000000007d1ff70 0000000077d5964c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
    0000000007d1ffa0 0000000000000000 00000000019c7c60 kernel32!BaseProcessStart
    State Dump for Thread Id 1e0c
    FramePtr         ReturnAd         Param#1          Function Name
    000000000edffe40 0000000077d5f691 0000000007d86460 ntdll!NtFsControlFile
    000000000edffeb0 00000000018ae00f 0000000000000000 kernel32!ConnectNamedPipe
    000000000edfff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
    000000000edfff70 0000000077d6b6da 0000000077d6b6a0 msvcrt!endthreadex
    000000000edfffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
    List of ABAP programs affected
    Index
    Typ
    Program
    Group
    Date
    Time
    Size
    Lang.
    0
    Prg
    SAPMSSY1
    0
    04/11/2005
    09:27:15
    22528
    E
    1
    Prg
    SAPLSYST
    1
    02/13/2005
    17:31:56
    35840
    E
    2
    Prg
    SAPLHRXSS_PER_MAC
    2
    07/03/2008
    12:14:05
    58368
    E
    3
    Prg
    CX_SY_REF_IS_INITIAL==========CP
    3
    07/05/2005
    13:10:16
    10240
    E
    4
    Typ
    SCX_SRCPOS
    0
    05/18/2004
    14:07:11
    2048
    5
    Prg
    CX_DYNAMIC_CHECK==============CP
    5
    07/05/2005
    13:10:16
    10240
    E
    6
    Prg
    CX_ROOT=======================CP
    6
    02/06/2008
    15:43:48
    11264
    E
    7
    Prg
    CX_NO_CHECK===================CP
    7
    07/05/2005
    13:10:16
    10240
    E
    8
    Prg
    CX_SY_NO_HANDLER==============CP
    8
    07/05/2005
    13:10:16
    10240
    E
    9
    Typ
    SYST
    0
    09/09/2004
    14:18:12
    31744
    Directory of Application Tables
    Name                                     Date       Time       Lngth
    Val.
    Program  SAPMSSY1
    SYST                                       /  /       :  :     00004612
    \0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0\0
    ABAP Control Blocks (CONT)
    Index
    Name
    Fl
    PAR0
    PAR1
    PAR2
    PAR3
    PAR4
    PAR5
    PAR6
    Source Code
    Line
    243
    FUNC
    03
    001F
    LHRXSS_PER_MACU03
    1
    244
    PAR2
    02
    0000
    001F
    C000
    LHRXSS_PER_MACU03
    1
    246
    FUNC
    13
    0003
    LHRXSS_PER_MACU03
    1
    247
    PAR2
    01
    0000
    0014
    C001
    LHRXSS_PER_MACU03
    1
    249
    FUNC
    FF
    0000
    LHRXSS_PER_MACU03
    1
    250
    ENDF
    00
    0000
    LHRXSS_PER_MACU03
    1
    251
    00
    0000
    LHRXSS_PER_MACU03
    1
    252
    STCK
    02
    C001
    LHRXSS_PER_MACU03
    1
    253
    CPOP
    00
    0000
    LHRXSS_PER_MACU03
    1
    254
    00
    0000
    LHRXSS_PER_MACU03
    1
    255
    FUNP
    3E
    0000
    0014
    8000
    0000
    8000
    0000
    0000
    LHRXSS_PER_MACU04
    1
    259
    FUNP
    80
    0000
    0000
    0000
    0000
    0000
    0000
    0000
    LHRXSS_PER_MACU04
    1
    >>>>>
    METH
    03
    0000
    0000
    8006
    0000
    0000
    0000
    0000
    LHRXSS_PER_MACU04
    13
    267
    PAR2
    00
    0000
    0001
    0000
    LHRXSS_PER_MACU04
    13
    269
    FUNE
    00
    0000
    LHRXSS_PER_MACU04
    18
    270
    00
    0000
    LHRXSS_PER_MACU04
    18
    271
    PERP
    00
    0000
    LHRXSS_PER_MACU04
    1
    272
    FUNC
    03
    E844
    LHRXSS_PER_MACU04
    1
    273
    FUNC
    03
    0020
    LHRXSS_PER_MACU04
    1
    274
    FUNC
    13
    0003
    LHRXSS_PER_MACU04
    1
    Second Dump
    Runtime Errors         DYNPRO_SEND_IN_BACKGROUND
    Date and Time          09/09/2008 08:19:15
    Short text
    Screen output without connection to user.
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSTRD" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    During background processing, the system attempted to send a
    screen to a user.
    Current screen: "SAPLSTRD " 0351.
    How to correct the error
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DYNPRO_SEND_IN_BACKGROUND" " "
    "SAPLSTRD" or " "
    "SYSTEM-EXIT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
    To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
    Display the system log by calling transaction SM21.
    Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
    In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    System environment
    SAP-Release 700
    Application server... "ERPDEV01"
    Network address...... "10.88.1.6"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "ERPDEV01"
    Database type..... "MSSQL"
    Database name..... "DE1"
    Database user ID.. "de1"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Oct 23 2007 00:33:51"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
    Patch level. 133
    Patch text.. " "
    Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
    NT 6.0"
    Memory consumption
    Roll.... 16192
    EM...... 12569520
    Heap.... 0
    Page.... 131072
    MM Used. 8307376
    MM Free. 4259072
    User and Transaction
    Client.............. 210
    User................ 937048
    Language Key........ "E"
    Transaction......... " "
    Transactions ID..... "68211f907e6911ddbfef005056833439"
    Program............. "SAPLSTRD"
    Screen.............. "SAPLSTRD 0351"
    Screen Line......... 0
    Information on caller of Remote Function Call (RFC):
    System.............. "########"
    Database Release.... 645
    Kernel Release...... 700
    Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
    Call Type........... "synchron and non-transactional (emode 0, imode 0)"
    Inbound TID.........." "
    Inbound Queue Name..." "
    Outbound TID........." "
    Outbound Queue Nam

    Hello Abhiram,
    Please i request weather you have assign 0105 - Communication infotype to ESSuser and
    check the following JCos has been configured.
    SAP_R3_Financials
    SAP_R3_Financials_Metadata
    SAP_R3_HumanResources
    SAP_R3_HumanResources_MetaData
    SAP_R3_SelfServiceGenerics
    SAP_R3_SelfServiceGenerics_MetaData
    SAP_R3_Travel
    SAP_R3_Travel_MetaData
    SAP_R3_SelfServiceGenerics_MetaDataFIN
    SAP_R3_SelfServiceGenericsFIN
    let me know this
    points if problem solved
    please close thread if problem solved
    thanksyou,
    regards
    Vijai

  • Screen output without connection to user

    I have a screen which has been running fine in testing for months. When released to the general population, some users get the following error:
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101) at com.linxas.applications.events.Events.executeZ_Rfc_Ial_Get_Wwi_Reports_Input(Events.java:1363) at com.linxas.applications.events.wdp.InternalEvents.executeZ_Rfc_Ial_Get_Wwi_Reports_Input(InternalEvents.java:6874) at com.linxas.applications.events.DetailsView.onActionSelectAccidentReports(DetailsView.java:1697) at com.linxas.applications.events.wdp.InternalDetailsView.wdInvokeEventHandler(InternalDetailsView.java:2305) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73) at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860) at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77) at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299) at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326) at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172) Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150) at com.linxas.models.z_rfc_ial_lock.Z_RFC_IAL_LOCK.z_Rfc_Ial_Get_Wwi_Reports(Z_RFC_IAL_LOCK.java:1619) at com.linxas.models.z_rfc_ial_lock.Z_Rfc_Ial_Get_Wwi_Reports_Input.doExecute(Z_Rfc_Ial_Get_Wwi_Reports_Input.java:137) at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92) ... 49 more
    This error is occuring when the user clicks on a link to action element that displays a WWI report from the backend.
    I'm wondering if this might be some sort of backend security issue? I searched the forums but can't find any reference to "Screen output without connection to user" in them.
    Any help would be appreciated.

    Hi,
       Looks like your RFC has one or more of "call screen" or "call transaction" statement in the code. Also you should have searched for "DYNPRO_SEND_IN_BACKGROUND" in SDN. Anyways, check if [this|Re: DYNPRO_SEND_IN_BACKGROUND; helps.
    Regards,
    Satyajit

  • Screen output without connection to user - Goals Standard APP

    Hi Experts,
    We have configured Standard PA iview - GOALS (web dynpro application HAP_A_PMP_GOALS) into Quality Portal.  When creating new goal and clicking on save button we are getting following dump. But the same is working in development server which is not working in quality.
    Only difference between these two servers is, SSO certificate is configured in Dev but no in Quality. But I guess this should be an issue since in both the servers I am using user mapping (not logonticket).
    The following error text was processed in the system DRC : Screen output without connection to user.
    The error occurred on the application server drcr3cs2_DRC_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Function: TRINT_ORDER_CHOICE of program SAPLSTRD
    Function: TRINT_OBJECTS_CHECK_AND_INSERT of program SAPLSTRD
    Function: TR_EDIT_CHECK_OBJECTS_KEYS of program SAPLSTRD
    Function: SCPR_SWITCH_OBJECTS_INSERT of program SAPLSCPRCRITICAL
    Function: TRINT_OBJECTS_CHECK_AND_INSERT of program SAPLSTRD
    Function: TR_OBJECTS_INSERT of program SAPLSTRD
    Function: RH_HRPOBJECT_CORR_AT_SAVE of program SAPLRHWM
    Form: UPDATE_PLOG of program SAPLRHAP
    Function: RH_UPDATE_DATABASE of program SAPLRHAP
    Function: HRHAP_C_VJ_CREATE of program SAPLHRHAP_C_IF_CASCADING_GOALS
    any one knows what could be the issue, any particular service need to be activated in Backend
    Thanks
    Murthy

    Hi Chinna Babu,
    Could you please elaborate your answer ? which back end configuration was missing ?
    Regards,
    Bindumadhav Ambike

  • Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAIL

    Good Afternoon,
    I have the following issue in the moment of update the data in the Employee Self-Service -
    >Personal Information----->Addresses, with a user at the moment of save the data the portal display the following message of dump
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
      Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE   
      Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.per.fc.persinfo.FcPersInfo.save(FcPersInfo.java:440)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfo.save(InternalFcPersInfo.java:770)
         at com.sap.xss.per.fc.persinfo.FcPersInfoInterface.save(FcPersInfoInterface.java:186)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface.save(InternalFcPersInfoInterface.java:275)
         at com.sap.xss.per.fc.persinfo.wdp.InternalFcPersInfoInterface$External.save(InternalFcPersInfoInterface.java:435)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.onEvent(VcPersInfoReviewNavi.java:213)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.onEvent(InternalVcPersInfoReviewNavi.java:171)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNaviInterface.onEvent(VcPersInfoReviewNaviInterface.java:115)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface.onEvent(InternalVcPersInfoReviewNaviInterface.java:124)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNaviInterface$External.onEvent(InternalVcPersInfoReviewNaviInterface.java:200)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:534)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.access$600(FPMComponent.java:78)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.raiseSaveEvent(FPMComponent.java:952)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.raiseSaveEvent(FPMComponent.java:1115)
         at com.sap.xss.per.vc.reviewnavi.VcPersInfoReviewNavi.next(VcPersInfoReviewNavi.java:227)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalVcPersInfoReviewNavi.next(InternalVcPersInfoReviewNavi.java:175)
         at com.sap.xss.per.vc.reviewnavi.ReviewNaviView.onActionNext(ReviewNaviView.java:153)
         at com.sap.xss.per.vc.reviewnavi.wdp.InternalReviewNaviView.wdInvokeEventHandler(InternalReviewNaviView.java:173)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.localwd.LocalApplicationProxy.sendDataAndProcessAction(LocalApplicationProxy.java:77)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1299)
         at com.sap.portal.pb.PageBuilder.SendDataAndProcessAction(PageBuilder.java:326)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:868)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.xss.per.model.mac.HRXSS_PER_MAC.hrxss_Per_Save(HRXSS_PER_MAC.java:478)
         at com.sap.xss.per.model.mac.Hrxss_Per_Save_Input.doExecute(Hrxss_Per_Save_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 64 more
    Regards,

    Hi Vijay,
    I have the following configutation
    32     0002              B1
    32     0006     1     A1
    32     0021     1     B2
    32     0021     2     A6
    10     0002              B1
    10     0006     1     A1
    10     0021     1     B2
    10     0021     2     A6,
    However this employee is the single that display is error.
    I check the data of this employee, compare it and this well.
    Regards,

  • Error: Screen output without connection to user

    Hi,
    I am trying to add a new mime object using the following call:
    CALL METHOD mime_repository->put
          EXPORTING
            i_url                     = url
            i_content                 = lv_file_content
            i_check_authority         = ' '
            i_language                = sy-langu
            i_suppress_package_dialog = 'X'
          EXCEPTIONS
            parameter_missing         = 1
            error_occured             = 2
            cancelled                 = 3
            permission_failure        = 4
            data_inconsistency        = 5
            new_loio_already_exists   = 6
            is_folder                 = 7.
    While executing this i am getting a dump. The error reported is: Screen output without connection to user.
    Can anybody help me out in solving this issue.
    Thanks in Advance,
    Regards,
    Nila

    Hi Paul,
    Thanks a lot for your suggestion.
    While running this program in the developmen system, it is running and I am able to upload the file/image to the mime repository.
    But when I run the same program in the test system, I am getting the above mentioned error.
    Regards,
    Nila

  • Urgent!! 'Screen output without connection to user'

    Hi,
    Our requirement is to send an e-mail in the outlook when a workflow is triggered.
    On trigerring, the WF is started but in TRXn SWEL the RFC status says <i><b>'Screen output without connection to user'</b></i>. In transaction SM58, i get the status 'Screen output without connection to user' against the function module  'SWW_WI_CREATE_VIA_EVENT' .  I have seen in the previous threads that pop-up could be one of the reasons. But i havnt used any pop-ups. The WF consist of only one step 'Send mail' in which we give the users email ID. Can any one help me on this issue?
    P.S: I was sucessful in sending mail to outlook previously, but suddenly show this type of error. Is it because of the change in configuration which our basis team do?
    Thanks in Advance
    S.P.K

    did u solve this problem if yes how did u resolve this...i am getting the same error...

  • "Screen output without connection to user" execption in CRM webui

    Hi All,
    My requirement is as follows:
    When user changes the status of a service request in WEBUI, the service request number should be sent to ECC through an RFC function call.
    For this I have created an action profile using method call(by creating a new implementaion for the BADI EXEC_METHODCALL_PPF). Now when I call the RFC FM, I am getting the exeception "Screen output without connection to user". It also says an execption "DYNPRO_SEND_IN_BACKGROUND" is created in the target system ECC. There is no issue with the action profile or BADI implementaion.
    I searched in SDN and found that the reasons might be any one of the following
    RFC user authorizations
    called FM might be opening a pop-up dialogue which results in connection break.
    But when I call the same FM from a report program, it is not giving me any exception. I mean this exception occurs only when I call the RFC FM from the above BADI.
    Any pointers on this will be very helpful.
    Regards,
    Narendra

    HI,
        Is any technical involvement would be there or Basis team will look into that.
    actually in back ground job there is rfc functional module is calling.
    Can u give some more inforamtion then it would be very helpfull to me.
    Thanks & Regards,
    Raghunadh.

  • TMS ''unable to connect to user repository "

    Dears ,
    We have migrated from TMS legacy to PE when i go to Provisioning> users i get "'unable to connect to user repository " , and when i go to PE diagnostics all the lights are showing red ,,,, and when i open TMS tickets it gives me an error saying the services are not running but when i check the services i see them running ,,,, i have attached some pictures which shows the error please advise

    Hi Hossam,
    From the logs I can see that you are running java 8 update 31. However, your TMSPE version is 1.0 (Product Name: Cisco TMS Provisioning Extension. Product Version: 1.0.159.) and the TMS is on 13.2.2. 
    Your Java version is not compatible with the TMSPE version you are running. For TMS 13.2.2, the compatible TMSPE and Java versions are:
    TMSPE: 1.0 
    Java: version 6 update 25-39.
    Now, to resolve the issue please follow the process mentioned below:
    - Uninstall the TMSPE. 
    -Uninstall all the versions of Java installed on the server and restart the server.
    - Install Java 6 update 37 or something between 33-38.
    - Install the TMSPE again.
    Restart the server. Now your TMSPE should come up. Revert the TMS agent to TMSPE on VCS and proceed with configuration of the provisioning on the TMS as mentioned in the TMSPE deployment guide. 
    Regards,
    -Deepti

  • Connection to user &&&& , terminal &&&& lost error in SM21

    Hi ,
    Often in our system users are getting logged out , If we see the sytem log in SM21 , it shows error as
    Connection to user &&&& , terminal &&&& lost , with Message no Q04.
    for (eg)  Connection to user 26647 (C045304 ), terminal 173 (DT-01046766 ) lost   
    is the exact error messages, and this problem we are facing in only one office say thorpe park, other
    places all the users are working normal, but this particular users are saying they are not able to acess
    SAP and it is gettting hanged / frozen up ,we checked up with LAN network also, seems to be okay,
    Can anyone advise if you people have come across this kind of problem or some more description of this
    problem why it occurs? It will be so greatful to us to solve the issue.
    Thanks and Regards,
    Gayathri.

    This is the short dscrption of that message given in sm21..
    Is this is the one you required for ?
    Documentation for system log message Q0 4 :                            
    The SAP Dispatcher (part of the application server) has lost the      
    connection to a terminal process.  For example, this happens when the 
    terminal program (GUI) terminates without correctly logging off the   
    application server.  More detailed information about the error        
    context is not available here.                                        
    Regards,
    Gayathri.

  • Ultrasearch error : WKG17005: connection failure: User credentials doesn't

    Hi,
    I wonder if anyone can help with the following issue, i'd be eternally grateful if they could.
    I'm the DBA on a site where our java developers have suddenly noticed that the ultrasearch element of a client web site no longer works.
    The length of time that the ultrasearch functionality has been broken is unknown so i can't be certain when it occurred.
    However the database was patched from 10.1.0.4.0 to 10.1.0.5.0 in sep 2007 so i'm wondering if its possible that the patching broke the ultrasearch functionality somehow.
    Could anyone advise if they have ever encountered anything similiar after an upgrade from 10.1.0.4.0 to 10.1.0.5.0.
    Also could the patching upgrade break or overwrite any ultrasearch configuration that i now need to recheck?
    The specific error being returned when the developers try to use ultrasearch is the following one
    WKG17005: connection failure: User credentials doesn't match the existing ones
    Now i'm new to the ultrasearch technology area but i've looked at the ultrasearch.properties file in the directory $ORACLE_HOME/ultrasearch/webapp/config/
    and another copy of the file deployed in a directory c:\webapps\app\WEB-INF\classes and the connection entries are as expected and as follows
    ultrasearch.connection.driver=oracle.jdbc.driver.OracleDriver
    ultrasearch.connection.url=jdbc:oracle:thin:@dev2:1521:mstest
    ultrasearch.instance=msus
    ultrasearch.user=wksys
    ultrasearch.password=wksys
    i have a couple of queries that i hope someone can answer
    1) can you see any obvious issues or mistakes in the ultrasearch.properties file listed above?
    2) the error message states "User credentials doesn't match the existing ones". This would imply that the user credentials supplied (wksys/wksys) don't match
    a set of expected credentials held or cached somewhere? Any idea where this would be or how i could clear any cached credentials?
    The code which tries to establish the connection with ultrasearch is as follows
    Configuration props = new PropertiesConfiguration (PROPERTIES_FILE);
    QueryInstance qi = new QueryInstance();
    qi.setConnectionString("jdbc:oracle:thin:@server:1521:instance");
    qi.setUser("user");
    qi.setPassword("password ");
    qi.setInstanceName("instance");
    where PROPERTIES_FILE is the ultrasearch.properties file referenced above.
    If i need to supply any other information around this query please advise.
    Regards,
    George Johnston

    Thanks for your response but command line authentication is the 1st thing i tried.
    also the account is not locked or expired.
    Regards,
    George Johnston

  • Unity Connection Voice Mail Issue

    Hi,
    I have a weird Unity Connection Voice Mail issue and would appriciate any help i can get. Many thanks in advance.
    I have Unity connection 7.0 and CUCM 7.0 integrated in a lab enviroment and here is what happens.
    When I place a call internally say from 2001 to 2002, things work as expected, 2002 rings and it goes to voicemail where I can leave voicemail and listen to it from 2002.
    However, if I place call from the PSTN to the same number 2002 (or any other number in other sites etc) the call again rings in 2002 and goes to voicemail, unity cnx plays the greetings for 2002 and says record your message as usual. Everything up to point is fine, then when the time on the PSTN phone is showing around 14 seconds into the call unity starts playing, "to send this message press one", if I press one nothing happens.
    I have rebuilt unity and cucm, even just configured the bare minimum in the lab and still getting the same result. I tried calling from E1 connection and T1 connection but with the same results.
    I have run out of ideas...
    ===============================
    Here is a call trace from an internal call:
    CallData, 1, CallerId=2003, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=8B7859FD6C16417A9A07F507418DD25B, CallerName=, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
    Application, 1, 2003, AttemptForward
    State, 1, 2003, State - AttemptForward.cde!Dummy
    State, 1, 2003, Event is [NULL]
    Application, 1, 2003, PHTransfer
    State, 1, 2003, State - PHTransfer.cde!LoadInfo
    State, 1, 2003, Event is [TrueEvent]
    Application, 1, 2003, PHGreeting
    State, 1, 2003, State - PHGreeting.cde!PlayGreeting
    Display, 1, 2003, Call answered if needed
    Display, 1, 2003, Playing greeting for Subscriber:  hq2
    Display, 1, 2003, No DTMF received
    Display, 1, 2003, Playing greeting for Subscriber:  hq2
    State, 1, 2003, Event is [RecordMsgEvent]
    State, 1, 2003, State - PHGreeting.cde!RecordMsg
    State, 1, 2003, Event is [NULL]
    State, 1, 2003, State - PHGreeting.cde!RunEditMsg
    Application, 1, 2003, -->MessageEditing
    State, 1, 2003, State - MessageEditing.cde!CheckMsgMenuOpt
    State, 1, 2003, Event is [EditMessageMenuEvent]
    State, 1, 2003, State - MessageEditing.cde!PlayEditMenu
    State, 1, 2003, Event is [HangupEvent]
    State, 1, 2003, State - MessageEditing.cde!CheckMsgLength
    State, 1, 2003, Event is [ManyEvent]
    State, 1, 2003, State - MessageEditing.cde!SendMsg
    State, 1, 2003, Event is [TrueEvent]
    State, 1, 2003, State - MessageEditing.cde!ConfirmSend
    State, 1, 2003, Event is [HangupEvent]
    Application, 1, 2003, <--MessageEditing
    State, 1, 2003, Event is [HangupEvent]
    Display, 1, 2003, Idle
    Display, 1, , Dialing (MWI) '2002'
    Display, 1, , Idle
    and here is a trace from an external (PSTN) call
    Trying 142.100.64.13, 5000 ... Open
    CallData, 1, CallerId=911, CalledId=2002, RedirectingId=2002, Origin=16, Reason=4, CallGuid=CA3DFD90846C4FE7B0D68298A7698287, CallerName=PSTN Emergency, LastRedirectingId=2002, LastRedirectingReason=4, PortDisplayName=PhoneSystem-1-001
    Application, 1, 911, AttemptForward
    State, 1, 911, State - AttemptForward.cde!Dummy
    State, 1, 911, Event is [NULL]
    Application, 1, 911, PHTransfer
    State, 1, 911, State - PHTransfer.cde!LoadInfo
    State, 1, 911, Event is [TrueEvent]
    Application, 1, 911, PHGreeting
    State, 1, 911, State - PHGreeting.cde!PlayGreeting
    Display, 1, 911, Call answered if needed
    Display, 1, 911, Playing greeting for Subscriber:  hq2
    Display, 1, 911, No DTMF received
    Display, 1, 911, Playing greeting for Subscriber:  hq2
    State, 1, 911, Event is [RecordMsgEvent]
    State, 1, 911, State - PHGreeting.cde!RecordMsg
    State, 1, 911, Event is [NULL]
    State, 1, 911, State - PHGreeting.cde!RunEditMsg
    Application, 1, 911, -->MessageEditing
    State, 1, 911, State - MessageEditing.cde!CheckMsgMenuOpt
    State, 1, 911, Event is [EditMessageMenuEvent]
    State, 1, 911, State - MessageEditing.cde!PlayEditMenu
    State, 1, 911, Event is [HangupEvent]
    State, 1, 911, State - MessageEditing.cde!CheckMsgLength
    State, 1, 911, Event is [NULL]
    Application, 1, 911, <--MessageEditing
    State, 1, 911, Event is [NULL]
    State, 1, 911, State - PHGreeting.cde!AfterMsg
    State, 1, 911, Event is [NULL]
    Display, 1, 911, Idle

    Sounds like one way audio from PSTN to your Unity Connection, couple of things to check:
    1. ensure your protocols are bound properly on the GW, i.e. SIP/H323/MGCP
    2. Make sure IP routing is OK between Unity and the voice gateway
    HTH,
    Chris

  • My mac air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbook that is able to connect with no issue. HELP

    My macbook air will not connect to the internet. There is an exclamation point in the wifi icon and when i go into preferences i see that it is setting its own IP address. I have a macbookpro that is able to connect with no issue. HELP

    Reset the TC to factory and start again.
    Use all SMB type names for wireless and base station.. Not apple type names.. this is more important since Mavericks.
    I also recommend different names for the different bands.
    So for example.
    TC name.. TCgenx (I use whatever the generation number is for the x.. eg TCgen4 or latest one TCgen5)
    WIreless name.. TC24ghz for 2.4ghz
    TC5ghz for 5ghz
    You can also set the channel manually.
    If you still have issues.. start with no security and then if it fails to connect there is something seriously wrong with the laptop. Did you upgrade install Mavericks?? That can lead to driver issues.. I would recommend a clean install.

  • Screen output without connection to user and other portal trouble

    I created filter. Saved it. If I tried edit it - it was allow. But after some time and after I used it in a query I trying edit the filter and can't do it! My rsplan portal page write to me:
    Screen output without connection to user., error key: RFC_ERROR_SYSTEM_FAILURE.
    ST22:
    Dynamic error:   DYNPRO_SEND_IN_BACKGROUND
    Short text:
         Screen output without connection to user.
    What happend?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSTRD" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    user, transaction...
        Client.............. 100
        User................ "PI_JCO_RFC"
        Language Key........ "E"
        Transaction......... " "
        Program............. "SAPLSTRD"
        Screen.............. "SAPLSTRD 0302"
        Screen Line......... 0
        Information on caller of Remote Function Call (RFC):
        System.............. "########"
        Database Release.... 645
        Kernel Release...... 645
        Connection Type..... "E" (2=R/2, 3=ABAP System, E=Ext., R=Reg. Ext.)
        Call Type........... "synchron and non-transactional (emode 0, imode 0)"
        Inbound TID.........." "
        Inbound Queue Name..." "
        Outbound TID........." "
        Outbound Queue Name.." "
    What happend? What I need to do? I try delete filter from query but it isn't make it editable.
    Another bug: I can delete this filter and can copy them into new filter. But when I delete it and try copy another filter to deleted technical name then system said that "element with same name already exist". How to delete the filter correctly?
    One more bug:
    I work with russian language. And on personalisation page of portal options I selected "Russian (Russia)" (There are variant simply "Russian" in list of langs but I tried it too with the same result) BUT I have only interface with russian lang and TEXTS of objects got for eng lang anymore (and in damp we can see that lang key = "E"). Where it must be corrected?
    And for last in this message: I can create an object or edit it but can see that object was last edited by PI_JCO_RFC. Is it right? So, how I will can see who change the object at last time?
    Help me please!

    >
    Deepti Maru wrote:
    > What object text you are talking about for which language is english but you want russian?
    I try describe it again.
    If I logon via SAPlogon with russian language in RSA1 I can see descriptions of objects for russian lang (and new objects which I will create will be with russian description if I enter it). In portal (rsplan) in personality I set russian language ang get the russian interface BUT it get descriptions for ENG and in this way I can't see any descriptions - only technical name because all objects was created with russian lang. So, what I need to do for get russian descriptions of objects in portal?
    And another trouble - when I create object (for example - aggregation level) in portal then I can't see descriptions of it in RSA1.
    And from this I have another question too. How I can (if it possible) use english interface and russian descriptions of objects in both portal and SAPLogon?

Maybe you are looking for

  • Video from my pc to my ipod nano

    Hello. Please see this image : [img]http://martinopapesso.com/videoipod.jpg[/img] For ipod nano 5th generation which of these options must I to choose?

  • BPM - BPE_ADAPTER : Unknown message Type

    Hello Experts, I am developing a simple BPM scenario with just one receive and one send step. I have configured bothl the BPM steps along with the container elements and verified the objects in IR and ID. In SXI_CACHE the status of teh Integartion Pr

  • Nokia n 70 contact retailer

    my nokia n 70 mobile displayed phone start up failed conatact the retailer ...please help me

  • Handling Unit Block and Unblock

    Hi, I have requirement to block and unblock Handling Unit  or Storage Unit  in warehouse management. How to block and unblock the Handling Unit  with the function module and what is the table where I can see the blocking status of the Handling Unit .

  • D3 + "Auto" White Balance in LR2 = +30 Magenta

    I have been finding some problems with the "Auto" white balance setting in LR2... Since I started shooting RAW with my D3 (while still shooting with my D70 in the same locations) LR2 likes to give me a +30 Magenta whenever I choose Auto no matter whe