Connecting i-pod to computer and getting it to come up on i-tunes...
I can not get my i-pod to connect to my i-tunes. The only way that I can get my i-pod to connect with the new 7.0 i-tunes is to restart my computer with the i-pod connected. Is there anyway to get my i-pod to connect as soon as I plug it into my computer? It worked prior to the new update and my ipod is fully updated.
Think Pad Windows XP
Try here:
iOS: Not responding or does not turn on
Similar Messages
-
Connect iPad to MAC computer and get this message: iTunes could not connect to the iPad because the device timed out. What is the likely problem???
Eject the iPad, quit iTunes, restart the Mac and reset the iPad and try again. Use another USB port on the Mac if you have a free one to use.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons and let the iPad start up. -
I connected my phone to computer and when I did I needed an update on my phone. when I did this all of my music on phone disappeared. How do I get my music back?
Resync it from your iTunes library. Music is not included in your backup.
http://support.apple.com/kb/HT4946 -
Just restored and updated my ipod and now when I connect it to my computer I get a message saying "this ipod cannot be used because the Apple Mobile Device service is not started" what does this mean?
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor ProHello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G -
When I connect my ipod to computer and open itunes, the songs on my ipod do not show up on the itunes library...it is blank...songs are still on my ipod but don't seem to show up on computer..help??
Download this for getting media off your ipod!http://www.macupdate.com/app/mac/19890/ipoddisk
Hope this helped! -
ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks
Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure. -
My Ipod touch 8gb will not turn back on no matter what i do i have tried just the power button, the power button and home button, and connecting it to the computer and the battery wasn't close to being dead non of them work what do i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I my ipod isn't letting me swipe in on the lock screen, and for now, i've given up on that, and i just got a new laptop. So what i'd like to do is not worry about getting in my ipod, but to plug it in my computer and get my music off of it. it is not letting me do this because i have to unlock my ipod but, sadly i cannot, if anyone can help me it would be greartly appreitiated.
You don't have to purchase it again, but you do have to download it. See Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
-
Hi there,
I have the following problem.
I opened a ticket in Day Care Support system, about CRX users/group membership that got lost while synchronization with our LDAP server.
Although when the user and the group had been created (and therefore taken from that same LDAP server), the membership was good.... but after some time the membership got lost......
So what i am trying to do now is a Java program that connects to CRX via RMI.
And gets the list of all the users from a group (aka membership).
The idea is to monitor the membership each seconds.
But when trying to get the property "rep:members" of the group, I have the following exception :
javax.jcr.ValueFormatException: Unknown value type 10
at org.apache.jackrabbit.rmi.server.ServerObject.getRepositoryException(ServerObject.java:13 9)
at org.apache.jackrabbit.rmi.server.ServerProperty.getValues(ServerProperty.java:71)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:322)"
I searched a little bit and found that "10" is the number for type WeakReference.
That's normal to me because memberships are stored in the group as a list reference to users linked to that group....
Anyways, what's not normal to me is that when the type is "10" the API does not let me get the Value (cf. ServerProperty.getValues() method)
Here is the program:
import java.util.HashMap;
import java.util.Iterator;
import java.util.Map;
import javax.imageio.spi.ServiceRegistry;
import javax.jcr.Node;
import javax.jcr.NodeIterator;
import javax.jcr.Property;
import javax.jcr.PropertyIterator;
import javax.jcr.Repository;
import javax.jcr.RepositoryException;
import javax.jcr.RepositoryFactory;
import javax.jcr.Session;
import javax.jcr.SimpleCredentials;
import javax.jcr.Value;
public class Test {
public static void main(String[] args) {
String uri = "rmi://sma11c02.............:1234/crx";
String username = "admin";
char[] password = {....................};
String workspace = "crx.default";
String nodePath = "/home/groups/a";
Repository repository = null;
Session session = null;
try {
// Connection to repository via RMI
Map<String, String> jcrParameters = new HashMap<String, String>();
jcrParameters.put("org.apache.jackrabbit.repository.uri", uri);
Iterator<RepositoryFactory> iterator = ServiceRegistry.lookupProviders(RepositoryFactory.class);
while (null == repository && iterator.hasNext()) {
repository = iterator.next().getRepository(jcrParameters);
if (repository == null) {
throw new IllegalStateException("Problem with connection to the repository...");
// Creation of a session to the workspace
session = repository.login(new SimpleCredentials(username, password), workspace);
if (session == null) {
throw new IllegalStateException("Problem with creation of session to the workspace...");
// Get the targetted node
Node node = session.getNode(nodePath);
System.out.println("Node : " + node.getName());
System.out.println();
PropertyIterator properties = node.getProperties();
System.out.println("List of properties for this node :");
while (properties.hasNext()) {
Property property = properties.nextProperty();
System.out.print("\t"+property.getName() + " : ");
if (property.isMultiple()) {
Value[] values = property.getValues();
for (int i = 0; i < values.length; i++) {
System.out.print(values[i]);
if (i+1 != values.length) {
System.out.print(", ");
System.out.println();
} else {
Value value = property.getValue();
System.out.println(value);
System.out.println();
NodeIterator kids = node.getNodes();
System.out.println("List of children nodes for this node :");
while (kids.hasNext()) {
Node kid = kids.nextNode();
System.out.println("\tChild node : "+kid.getName());
PropertyIterator kidProperties = kid.getProperties();
System.out.println("List of properties for this child :");
while (kidProperties.hasNext()) {
Property property = kidProperties.nextProperty();
System.out.print("\t"+property.getName() + " : ");
if (property.isMultiple()) {
Value[] values = property.getValues();
for (int i = 0; i < values.length; i++) {
System.out.print(values[i]);
if (i+1 != values.length) {
System.out.print(", ");
System.out.println();
} else {
Value value = property.getValue();
System.out.println(value);
System.out.println();
} catch (RepositoryException e) {
e.printStackTrace();
} finally {
if (session != null) {
session.logout();
Here is the output of the below program:
Node : a
List of properties for this node :
jcr:createdBy : admin
jcr:mixinTypes : mix:lockable
jcr:created : 2011-10-25T16:58:48.140+02:00
jcr:primaryType : rep:AuthorizableFolder
List of children nodes for this node :
Child node : administrators
List of properties for this child :
jcr:createdBy : admin
rep:principalName : administrators
rep:members : javax.jcr.ValueFormatException: Unknown value type 10
at org.apache.jackrabbit.rmi.server.ServerObject.getRepositoryException(ServerObject.java:13 9)
at org.apache.jackrabbit.rmi.server.ServerProperty.getValues(ServerProperty.java:71)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:60)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
at java.lang.reflect.Method.invoke(Method.java:611)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:322)
at sun.rmi.transport.Transport$1.run(Transport.java:171)
at java.security.AccessController.doPrivileged(AccessController.java:284)
at sun.rmi.transport.Transport.serviceCall(Transport.java:167)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:547)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:802)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:661)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:897)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:919)
at java.lang.Thread.run(Thread.java:736)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
at sun.rmi.server.UnicastRef.invoke(Unknown Source)
at org.apache.jackrabbit.rmi.server.ServerProperty_Stub.getValues(Unknown Source)
at org.apache.jackrabbit.rmi.client.ClientProperty.getValues(ClientProperty.java:173)
at Test.main(Test.java:96)
Here is the list of jar files i'm using with this program:
2862818581 61388 crx-rmi-2.2.0.jar
732434195 335603 jackrabbit-jcr-commons-2.4.0.jar
1107929681 411330 jackrabbit-jcr-rmi-2.4.0.jar
3096295771 69246 jcr-2.0.jar
1206850944 367444 log4j-1.2.14.jar
685167282 25962 slf4j-api-1.6.4.jar
2025068856 9748 slf4j-log4j12-1.6.4.jar
Finally, we are using CQ 5.4 (CRX 2.2) with the latest hotfix and under Websphere 7.0
Best regards,
Vincent FINETJe suis absent(e) du bureau jusqu'au 17/04/2012
Je suis absent.
Je répondrai à votre sollicitation à mon retour le 17 avril 2012.
Cordialement,
Vincent FINET
Remarque : ceci est une réponse automatique à votre message "[CQ5]
Connection to CRX via RMI and getting WeakReference value..... with an
exception!" envoyé le 13/4/12 0:32:14.
C'est la seule notification que vous recevrez pendant l'absence de cette
personne.
Le papier est un bien precieux, ne le gaspillez pas. N'imprimez ce document que si vous en avez vraiment besoin !
Ce message est confidentiel.
Sous reserve de tout accord conclu par ecrit entre vous et La Banque Postale, son contenu ne represente en aucun cas un engagement de la part de La Banque Postale.
Toute publication, utilisation ou diffusion, meme partielle, doit etre autorisee prealablement.
Si vous n'etes pas destinataire de ce message, merci d'en avertir immediatement l'expediteur. -
I reinstalled X pro on my newish computer and get appcrash error message - how do i fix? bill
I reinstalled my acrobat X pro in my new computer and when I try to open it I get the APPRASH error message. I cannot print documents from word 7 to acrobat either and the acrobat printer doesn't show on my printer selection. I downloaded Acrobat reader 11 and it will not read pdf documents. How do I fix? Bill
here's the error message i get in reader 11
Problem signature:
Problem Event Name: BEX
Application Name: AcroRd32.exe
Application Version: 11.0.7.79
Application Timestamp: 536b80b0
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 0050005c
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e7
my word program is officei home and business 2010
In a message dated 5/20/2014 12:48:18 P.M. Eastern Daylight Time,
[email protected] writes:
i reinstalled X pro on my newish computer and get appcrash error message -
how do i fix? bill
created by Test Screen Name
(https://forums.adobe.com/people/TestScreenName) in Acrobat Installation & Update Issues - _View the full
discussion_ (https://forums.adobe.com/message/6394814#6394814) -
Whenever I turn on my Apple TV, it get an error message that says "Have you forgot your password. You have attempted to log in too many times. Go to itunes store on your computer and get your password". I have logged into itunes store on my computer, but I don't know what to do next. I accessed my account on itunes store hoping that would give me a pasword or other useful information, but no help. What am I supposed to do?
I was not complete clear.
Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section. If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
But before I would check the folders and see if the songs are really there
In my iTune I have this, and I believe it is the default.
Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music -
when i click the firefox icon to open firefox it pops up a box that says that firefox is running but not responding. i open taskmager to close the firefox process but there is no firefox process listed. i restart my computer and get the same result. firefox appears to still be running but not responding even after a restart. i even tried a cold boot ad got the same results. performed a full virus scan and excep for some tracking cookies it came up negative. i deleated the firefox kernal and downloaded a new copy and installed it. got same problem.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs -
My wife just got a new iPhone 6 and took some great photos then I connected it to her computer and restored it to her iPhone 4 settings and lost her new photos. Is there a way to recover them?
Sorry, unless she backup up the new phone before or is using iCloud to save the photos, the photos are gone.
-
Upgraded both computers in the household and found Lion is too disruptive to workflow.
Do I turn in the new laptop for a pre-Lion rebuild to keep Snow Leopard, or do I return new computer and get upgraded memory to improve performance of existing MacBookPro? I'm mostly still happy with existing MacBookPro, but Aperture doesn't work, the computer can't handle it.
Other possibility is setting up virtual machine with Snow Leopard server software on new computer.
Any opinions on what would allow moving forward with the least hassle and best workflow continuity?hi,
what year and specs does the MBP have
Maybe you are looking for
-
hello,im new here.i recently got a wirless router and reciever.on the computer that recieves the wireless via the reviever (WUSB54GS) the internet keeps disconnecting,then reconnecting two seconds later.i notice this because of the little computer in
-
InDesign CS5 ME English way Page Layout
Hi, we started using InDesign CS5 ME in our Students association for our Journal, but we faced problems with English Layout pages. I explain: InDesign ME wants to put first page on the left, but we need to put it on the right because our Journal is i
-
How to delete only events I previously imported from .ics files?
I have a very frustrating problem. A few months ago I added a few .ics calendars and merged them with my main calendar on iCal. For example I added a list of dates of baseball games for my favorite team, a list of holidays in Britain, and a few other
-
I keep getting a can not get mail message yet I'm getting mail
I Keep getting message "can not get mail" but im getting mail?
-
In fact, I will illustrate my question by an example. Let's take the song "Stayin' Alive" by the Bee Gees, this song appears on the of Saturday Night Fever Soundtrack as well as songs by other artists. So on the tag of that song "Bee Gees" is in th