Connecting iBook 14" G4 to apple 20" display

Is it possible to connect an ibook 14" G4 to an Apple 20" display? If so what connecting wire do I need? A mini DVI to DVI does not work.
Thanks for your help...

You can, but it's expensive.
Your iBook only has VGA, so you would have to use a mini-VGA converter to VGA then take that VGA to a VGA to DVI converter, that is the expensive part. I think there's only one or 2 companies that make a VGA- DVI converter and it's close to $300.

Similar Messages

  • Connecting playstation 2 to an Apple Cinema Display

    How do I connect my playstation 2 to my Apple Cinema display? Any suggestions?

    Does your cinema display have DVI in?
    Depending on what model screen you have, I'm guessing you could use a HDMI to DVI converter cable.

  • Connecting iMac DV 400 to Apple Studio Display 15" LCD(m4551)

    I've connected the display to the iMac but the display shows an "Out of Range" message. I'm running 10.3.9. The display doesn't show up in the Display window in the System Preferences.

    All is well. I set the display setting to the highest resolution and it works.

  • What cable do I use to connect my iBook to my iMac so it displays the iBook's screen?

    What cable do I use to connect my iBook to my iMac so it displays the iBook's screen?

    You may connect the two computers via firewire cable
    http://support.apple.com/kb/HT1661?viewlocale=en_US

  • How to connect a apple cinema display to an imac

    I have a brand new 27 inch iMac. I also own a 30 inch  Apple Cinema Display.  What peripheral adaptor do I need to connect the display to my new iMac?

    Hello,
    Thunderbolt/Mini DisplayPort-> Dual Link DVi cable...
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter
    A notable peculiarity of Thunderbolt is that it uses exactly the same connector as Mini Display Port, and that's not all. The Thunderbolt connector also carries Mini Display Port video signals. That means you can plug a Mini Display Port video cable/adapter in to a Thunderbolt connector and your monitor will work.
    - Anonymous
    http://x704.net/bbs/viewtopic.php?f=13&t=6134&p=75115&hilit=thunderbolt#p75115

  • What do I need to connect my apple cinema display to new macbook pro

    what do I need to connect my apple cinema display to new macbook pro?

    2011 macbook pro with TB ->  apple 27" Cinima Display with mini-displayport 
    Does this work natively?  Is there an adapter or workaround? 
    No, not until or if an adaptor becomes available.  See this thread.
    Apple display and Thunderbolt compatibility

  • How to connect 22" Apple Cinema Display with ADC to Mini DisplayPort?

    What are my chances to connect a 22" Apple Cinema Display with ADC connection to my new MacBook Pro with its Mini DisplayPort? Is there a combo possible of some adapter with some cable for instance?

    You need a Mini DisplayPort to DVI adapter
    <http://store.apple.com/be-fr/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=MTEwMjYzNzQ>
    followed by a DVI to ADC adapter
    <http://store.apple.com/be-fr/product/M8661Z/B?fnode=MTY1NDA5OQ&mco=MTE0ODUyODQ& s=topSellers>

  • How to connect old Apple Cinema Display to new Mac Mini?

    Hello,
    I'm considering replacing an old Mac Mini with the new model, but I intend to keep on using my old Apple Cinema Display 20" with it. But i'm having some trouble finding the right conversor (it seems there isn't any from Apple...)
    Any suggestions?
    Thank you.

    If by "old" apple cinema the OP is referring to the aluminum displays of the later mac models, then yes, that's a no-brainer, the problem is that if the OP is referring to the "real" old apple cinema displays, which have a DVI-type connection with power included on the same cable, like the displays the former Mac G4 or G5 had, then he needs a ADP to DVI port, which in most cases it cost more than the actual monitor itself.. I guess the OP needs to specify what does it mean by old apple displays or throw in a link to an image..

  • How do i connect my Fujitsu Tablet + mac Pro to Apple Cinema Display 23'?

    Dear Mac users
    thanks in advance for your help.
    I currently own:
    • Fujitsu T 4220 (tablet) – Mobile Intel 965 Express – 60 Hertz – goes up to 1680*1050 (guess SXGA) – (it has the following other supported resolutions: 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600)
    • Mac Pro
    • Apple Cinema Display 23’
    What I would like to do is, please refer to the jpeg posted on http://www.flickr.com/photos/34831802@N06/3234336204/, connect – at the same time – my tablet pc and my Mac Pro to the 23' Apple Cinema Display and switch (when I need) from tablet to MacPro using the same 23’ ACD. Top would be to be able to switch for one to the other while they’re both switched on. Usually on 2 pc’s with vga I’d use a switch A → B (in the jpeg it would be I → E) with a selector.
    Have been reading different posts such as: http://discussions.apple.com/thread.jspa?messageID=8000641&#8000641 or http://discussions.apple.com/thread.jspa?messageID=6530475&#6530475 or
    http://discussions.apple.com/thread.jspa?messageID=7417258&#7417258
    + others on the net and have (hopefully) understood that:
    a) from Vga to Dvi I need a converter such as Geffen’s or similar
    b) the problem with ACD 23’ is that it has only 3 resolutions: 1024*640, 1280*800 or 1920*1200
    In the attached image I guessed a connection in order to connect – at the same time – both the machines to the 23’ ACD:
    1) my fujitsu tablet (i in the image) has to be connected, with a Vga cable (h), to the Vga → Dvi converter (g).
    2) from the Vga → Dvi converter (g) I need to connecto to the Dvi switch (c)
    3) easier is connecting the Mac Pro (e), since I only need a Dvi cable (d) to connecto to the Dvi switch (c)
    4) the Dvi switch (c) will then be connected to the 23’ ACD with a Dvi cable
    Now, my questions are:
    a) is the solution described above (Vga cable (h) to the Vga → Dvi converter (g)) a good solution or should I use, instead, a docking statione that comes with a Fujitsu Port Replicator (FPCPR65) which has a 1 x DVI-D port?
    b) Given the 3 resolution accepted by the 23’ ACD (1024*640, 1280*800 or 1920*1200), I do not understand if I can use my tablet through a Vga to Dvi Converter and at which resolution (my tablet has the following other supported resolutions: 1680*1050, 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600).
    c) Is there a way, also using an external video card or converter, to bring my resolution from 1680*1050 to 1920*1200? (the 16:10 ratio is in fact the same = WXGA (1280x800), WXGA+ (1440x900), WSXGA+ (1680x1050), WUXGA (1920x1200)
    d) Talking about Vga → Dvi converter (g), am aware of the gefen product. Can you please list some others that might be good as well?
    e) And how about the DVI switch? Any will work? Any particular suggestion?
    Thank you very much for your help.
    If you have any other suggestion, please let me know.
    Regards,
    Emil

    Noone to help me?
    No ideas?
    Thanks,
    Emil

  • How to adjust the brightness of a second display connected to iMAC 2012  by Apple Mini DisplayPort to Dual-Link DVI Adapter?

    How to adjust the brightness of a second display (Dell 3007WFPHC 2560x1600 dpi) connected to 27 inch iMAC 2012 through thunderbolt port by an Apple Mini Display Port to Dual-Link DVI Adapter?

    Macs control computer by USB.  With a non-Apple display, you will have to use the brightness control on the display.

  • Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278.  I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

    Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278.  I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
    im not sure what to do next - can anyone help?
    im running OSX 10.7.4

    Hi There,
    I have had the exact same issue but with a projector.
    The issue lies with Mountian Lion 10.8.2.
    I tried many a combination with no luck to get HDMI working.
    Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
    Bought my macbook home and voila, now displaying through my projector.
    There is a small graphics update after 10.8.1 which seems to be the cause.
    Hope this helps.
    Thanks.

  • Connecting a keyboard to Apple Cinema Display with MBA

    Hi,
    I have a mid 2013 MacBook Air, (OSX 10.9.2). My Apple Cinema Display is the older 23" (got it in 2008) and I have connected my MacBook Air to the display through my mini display port DVI adapter and it works great.
    My question is --- I want to now connect a keyboard --- does a wireless keyboard or mouse work? My Cinema display only has a USB 2.0 and FW ports.
    Thanks alot.

    Yes.  Wireless mice or keyboards connect to the computer via Bluetooth.  The display type doesn't matter.

  • Hi, I just got an Apple Thunderbolt Display. How can I connect it to my sony vaio pc? Thanks

    Hi, I just got an Apple Thunderbolt Display. How can I connect it to my sony vaio pc? At Apple Store they gave me a Mini Display Port to VGA Adapter, but monitor doesnt display any image. Thanks for your help!

    no, your computer needs to have thunderbolt technology. does it?
    if not, no adapter can make a thunderbolt display work on a non-thunderbolt computer.
    someone was likely confused since miniDP will FIT into a TB socket but is only compatible one way, ie a mDP display can work on a TB machine, but a TB display cannot work on a mDP machine

  • What years apple cinema display can I connect to the new 2012 mac mini?

    I have a 23" Apple Cinema Display that I purchased in 2007. I currently have it connected to m7 2009 Mac Mini. Can I use it with the new 2012 Mac Mini? I am running the latest OS on my 2009 Mac Mini.  I want to upgrade my Mac Mini for more storage a nd the faster processor.

    Yes.  You can connect it to the Mac Mini's HDMI port with the HDMI to DVI adapter that comes with the new Mac Mini, or you can connect it to the Thunderbolt port with a Mini DisplayPort to DVI adapter.
    <http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter>

  • How do i connect apple cinema display a1082 to my new macbook pro

    I have a macbook pro intel core duo2 and i'm trying to connect my apple cinema display a1092 to my computer, there is an adapter available, but it does not seem to address the fireware cable coming out of my cinema display

    the apple display that i see online has a mag safe, usb and mini display port...connect all three to your laptop so you can charge your laptop as you use the display as well as use the USB ports on the back of the monitor.. i didnt see anything about firewire...

Maybe you are looking for