Connecting IDES source system to BI Dev system
Hi,
Can we connect IDES R/3 system to BIW dev system???
If yes, then is it the same procedure for RFC or something different???
Thanks & Regards.
Hi Ganesh,
Yes, you can. Is like any other R/3 system.
You just create the source system in BW and that's all.
Hope this helps.
Regards,
Diego
Similar Messages
-
PSGUID Field in the Hide in the Quality System,Unhide in Dev System
Hi all,
We have applied note 929584 to get the GUID filed in the Standared extractors.
That is perfectly applied & we have tested in BW development & R/3 Dev.
same request we have trasported to Quality system but in some data sources GUID , CPR_GUID & OBSNR fields are in the HIDE .
I have done the following things:
1. I have checked in RSA2 of Quality system those filelds are "Fileds to be trasfered" check box is unchecked *( But not in DEV)
2.RSA6 also those filed are with HIDE Check box ( But not in DEV).
3. I have reactivated the datasources in DEV sytem once agin & Retrasported but still those fileds are in the same situation.
So please suggest me How I have to unhide these fileds in the Quality System.
Please suggest me.
Thanks,
Kiran Manyam
Edited by: kiran manyam on Apr 1, 2009 11:03 AMHi Rajiv,
Thank you very much for the quick reply. I created an entity adapter and did things as you said .. But start date field is not getting pre populate. what i want is once the user clicks on the "Users -- > Create" link create user page should loaded and system date need to be shown as the start date..
For an example in create user page 'change password at next logon' chek box is already checked(prepopulated) once the create user page is loading. Likewise what i want is when user creation page is loading display the current system date as the start date..
I think now my problem is clear to you..
will it be possible to do.. can you please help on that....
Regards,
i.k. -
Copy LabView VI from on dev system to another dev system?
We have two development systems here. I need a VI that is on the other system. How do I get the VI from one development system to the other development system? Do I need to deploy it? Or can I just copy it?
Thanks,
Steve
Solved!
Go to Solution.Just copy it over. Make sure you have all of the subVIs that it might possibly call.
And if these systems are for the same thing, I recommend networking the two systems together and use a source control software (like SVN) to keep the codes in sync.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Activating the standard transport system in BI Dev system.
Hello All,
We have a debate going on like whether we need to activate the standard transport system or not in BW Development.
Our user is asking to enable some functionality from a Web Template using the
Save As command. This command enables a user to slice a report and
then save this view as a Portal Favorite. This functionality appears to be
blocked when the transport system is active(Switched on) but he is able to save it when transport system is switched off.
I know that it has to be switched on in order to collect the changes in transport requests in Dev other wise will be collected as Local obects in $TMP.
Also let me know the pros and crons of activating the transport system.
Appreciate if you could throw some light on this and solution to the above problem.
Regards,
HariHi,
It's mentioned the activity of saving BI Query is carried out in Portal, so am assuming you might be using a BEx Web application for this.
If yes, then would suggest you to try once after switching off the standard transport. And instead use BEx transports in Admin workbench.
My understanding can be completely wrong, in which case request you to provide more details on the environment and the steps done.
Thanks,
Swapna Priya. -
Source System of Dev System is not active QAS System.
Hi
I am trying to transport my SAP-BI flow from Dev System to the Quality System.
but I am getting an error "Source System of Dev system is not active in QualIty System.
I have checked RFC Connection ,everything is fine.Please help.
Thanks and Regards,
AsimHave you checked the mapping of the source systems in the conversion table (RSLOGSYSMAP)?
Usually, DEV source systems are not available in QA, so when you transport to DEV, the source system assignment has to be changed to a QA source system.
For example, source system CRDCLNT100 (CRM DEV system) is connected to BWDCLNT100 (BW Dev)
and CRTCLNT100 is connect to BWTCLNT100.
Objects in BWD which are assigned to CRD, have to be re-assigned to the CRT source system when transporting them from BWD to BWT.
The mapping table is maintained in RSA1, menu option tools > 'mapping of the source system names'.
Jan. -
BI Portal is not displaying Dashboard while Executing from BI Dev System
HI Friends,
I have created Dashboard based on Bex Query using SAP Netweaver Connection and published it to BI Dev System.
it was running good but past 3-4 days it is not working.
When I am executing it from BI Dev its not showing the output in BI portal.
its only show initializing part of dashboard.
please suggest ........
Regards
Sanjeevhas your bex query changed that the dashboard is sourcing its data from? if so, and you have set the connection to "refresh before components load" it will sit at this state until it times out (error handeling is not great). perhaps worth dropping a refresh button in an trying it without refresh on open - this will rule out (or in) a problem with the data connection.
Cheers,
Jeremy -
Synchronizing bw systems prod and dev
This client directly did everything on bw prod system and now they want to synchronize bw prod system with BW Dev system.
Can please someone guide me that how to do?
I will appreciate if some one can give detailed steps involved in synchronization.
Thanks
Sakshihi
you could restore a BWP sys in a to new BWD system. so you can have exact replica for your BWP system.do the redirect restore, might it helps
Thanks
Qs -
Transport Groups: One Technical System targets two technical systems
Hi guys,
One question relating to transport groups.
Is it possible to define for one technical system which belongs to one group, let's say DEV, two target Business Systems which belong to another group, let's say PRD?
Meaning,
Technical System XPTO targets:
Group PRD Tech System: XPTO2
Group PRD Tech System: XPTO3
ThanksHi VJ,
Sorry, wrong word...I meant Tech System to 2 Tech Systems.
Having DEV System targeted to QLD and PRD tech system which are on the same group.
DEV Tech System targets to group
Group PRD : QLD Tech System
Group PRD : PRD Tech System -
Transfer rules are not exist for ECC Quality source system in BI Dev
Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandraHi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks -
RFC connection to source system is damaged , no Metadata uploaded
Hello Friends,
I need your help to understand and rectify why my transport is failing again and again.
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata upload
Environment - Production Support (Dev - Quality - Testing - Production)
Alive scenario - Need to create two InfoObject and incorporate the fields in to data targets and reports.
What we have did?
1st request - We have created new request and captured two Infoobjects in to the request.
2nd Request - We have captured the replicated Datasource along with that the below sequence displayed by default in the same package.
Communication structure
DataSource Replica
Transfer Rules
InfoSource transaction data
Transfer structure
3rd Request - we have captured DSO and Cube only in this request.
4th Request - Captured 2 update rules (ODS) Update Rule (Cube)
The above 3rd request failed in the testing system (successful in Quality System) and ODS is inactive in the Testing system.
Testing system Error Message:
The creation of the export DataSource failed
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object ZEOINV09
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/AZEOINV0900)
Table /BIC/AZEOINV0900 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/AZEOINV0900 has not been activated
Error when resetting ODS Object ZEOINV09 to the active version
So we have captured the data mart Datasource and created a new( 5th ) request (transported only 5th request )and transported in the below sequence
Communication structure
Datasource Replica
Transfer Rules
Infosource transaction data
Transfer structure
development to Quality - Successfully
Failed in testing system again.
How to rectify this error, please help us
Thanks,
Nithi.Hello All,
*Question -1*
I have checked the connections and typed the steps below - what i have seen in the screen.
Steps :
R/3 Connection - I have double clicked on the BT1CLNTXXX and tested the connections.
Connection Type :
Logon - 0KB , 10 KB , 20KB, 30 KB
R/3 connection:
5 msec, 0msec, 1msec,1msec,1msec
Please let me know whether RFC connection is OK or not.
Question - 2
I want to know is there is any option to check before transporting the TR from Developement to Quality - "Preview Check " the sequence , so that we can avoid the Transport failure because of TR sequence.
Regards,
Nithi. -
Can we have SAP R/3 QAT system as source system for BI dev
HI ,
We are doing SAP BI implementation and in our company we have already SAP R/3
The problem is BI team is doing some development in BI DEV and they want to see some data.
But unfortunately we don't have much data in DEV enviornment.
So my question is can we have SAP R/3 QAT system as source system for BI dev.
Will there be any issues going forward.
As per my understanding technically source system is just an RFC connection for BI, so we can point it to QAT as well.
Do you guys foresee any issues in that?
Thanks,
SumitHello Sumit,
What Arun said was what my concern was, he explained exactly the scenario that I faced, and that your BI team will face if you arrange your landscape as you said.
In my company for a while I had the BI Dev box connected to our ECC SND box.
It was done that way because of the lack of data in ECC Dev.
It worked, but it was definately not the best solution. Today we have BID and ECC Dev connected, BIQ and ECC Q, and BIP and ECC Prd. We do have data in teh attached ECC systems due to recent refreshes too, a large data set is very nice as it helps the BI team significantly.
That is the best way to arrange the landscape (and throw a BI SND to ECC SND for the true best practice!)
Thanks,
Nick -
Could not make connection to source system
Hello Experts,
I am trying to fetch data based on selection for last month in info-package but when I try to enter selection (pull down button), I get error message - "Could not make connection to source system..."
Any idea why this message?
I have already checked connection to ECC - is fine.
Datasource is replicated.
Also if I try to run info-package without selection - I am getting yellow status, No data fetched. RSA3 shows many rows but Info-package to data (Full extraction.)
Regards,
SMSrini/Vikram,
user credential is good. sm59 connection is good. there is data in selection as RSA3 fetches rows in ecc.
when I run any info-package - I am getting yellow status? No data while rsa3 indicate data for Full update?
why so?
I am more of design person, not much into hands-on - so seeing these error for first time.
Q1) if a package is already schedule - let us sat thru data source 2lis_11_vaitm. Now I want to go back and retrieve last month data already extracted... once again. I should be able to pull this data in new infopackage using Full update - data selection option.
Q2) - rsa3 should fetch data based on set-up tables, so any infopackage based on Full update mode - should fetch data - independent of any other infopackage.
q3) we need to do delete and fill-set-up table - only if extract structure is changed? right?
regards, sm -
When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer. Earlier today I wasn't having any problems. I have shut down the iPad and the computer and started over, but that didn't help. Any ideas on how to get the system to read the iPad so I can update the apps on it?
Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
Please let me know if you need any further assistance. -
RFC connection to source system ABPCLNT310 is damaged
Hello,
I'm importing a transport in BW Prod (condition type data for billing and orders), but receive this error message in STMS:
The creation of the export DataSource failed
Reading the Metadata of 0SD_O05 ...
Creating DataSource 80SD_O05 ...
RFC connection to source system ABPCLNT310 is damaged ==> no Metadata upload
RFC connection to source system ABPCLNT310 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Error when activating ODS-objekt 0SD_O05
The creation of the export DataSource failed
The import worked fine in BW QA system. Why do I get this error? It is possible to manually generate the export data source from the ODS object, but when I try to import again, it once again fails...
Best regards,
Fredrikhi Fredrik,
check if helps oss note 597326, 886102, 184322
RFC connection to source system Damaged
Error when transporting ODS Object
597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again -
Connection of 1 source system to 2 Target system
HI ,
We are in the midst of upgrading the hardware for our BW box.
At present old box is as follow:
1)BWQ connected to source QAS
2)BWP connected to source PRD
The new box is called FWP. We are testing on the new FWP by establishing connection of FWP with source system QAS.
This mean, source system QAS is connected to 2 boxes at the same time.
old BWQ-QAS
new FWP-QAS
I would like to know if we perform data load in new FWP, what will the impact be. Will that impact the delta queue in source system QAS? If i trigger load in FWP, does that mean we will loose the delta whn data is triggered in BWQ?
Regards,
MailiHi,
Since itu2019s a new box this will not impact to old box, but we need to develop everything from start in new box or you can copy from the Old.
We also have something like it.
Check the below link which will help you.
Re: Replicating data sources during upgrade of Source system
Hope it Helps..
Edited by: Rakesh BI on Apr 26, 2011 10:03 PM
Maybe you are looking for
-
Yoga 2 Pro - Screen not rotating on new Windows 8.1 install
I got my new Yoga 2 Pro last week and the screen rotation worked properly. I decided to wipe the partitions and install my own version of Windows 8.1. Since then the screen rotation doesn't work. The screen rotation button doesn't do anything and I d
-
Hi all, My question is as follows: i have used table view in my page and I want to change the color of the rows with alternate rows having the same color in the table view. Can anyone help me on this? Thanks and Regards Shilpa Dhawan
-
Problem with adding web service
Hi all, I have NetBeans IDE 6.5 and GlassFishV2 installed on my pc. I tried to add a new web service client from an existing WSDL url to my java project but I get this error during adding the web service: WsCompile script failed during initial clien
-
Hi, I'm trying to record off my guitar via a Griffin cable, but don't know how to go about it- the program doesn't seem to recognise that any external instrument is plugged. How do I go about this? Thanks, Al
-
For the life of me I can't figure out why this isn't working properly. I've been resizing images this way for months now and I must have changed some setting or whatever cause it simply doesn't work. Please be kind if I'm posting improperly as this i