Connecting iMac to mac mini

recently purchased a Mac mini since the hard drive on my intel iMac was about to fail. Almost all of my files where saved on firewiredrives but there are a few things to still be transfered from the old computer. I was able to set them up to see each other via bluetooth, but is it possible to transfer data via the ethernet ports?

Hey Drack1cba,
Thanks for the question. There are a few options for accomplishing this goal, some of which are outlined in the following article.
OS X Mavericks: Transfer files between two Mac computers
http://support.apple.com/kb/PH14409
Thanks,
Matt M.

Similar Messages

Finder: connecting iMac to Mac Mini server

Hello,
When I connect in the Finder to the Mac Mini Server (Snow Leopard Server), it takes on our iMac Snow Leopard 90 seconds on a fixed 1 Gbps network.
Why does it take so long ?
Connecting our iMac with Leopard takes only a few seconds.
Thanks,
Hubert

Yes.
I just tried to connect in the finder to a Windows XP Pro PC. Before I could look at my watch, I had access to the Windows XP filesystem.
I tried it also with my MacBook to connect to the server in the finder. Here too, it takes only a few seconds.
I do not understand why it takes 90 seconds on the Snow Leopard iMac.
Hubert

Internet connection sharing between Mac Mini and Imac G3- how?

Ok, I'm trying to connect my G3 Imac (running 10.4.8) to my Mac Mini (also running 10.4.8) but it just wont work.
I've turned Internet Connection sharing on on my Mac Mini, and set it to share the airport connection to computers connected using Built in ethernet.
Network (on the M Mini) shows
Built-In Ethernet is currently active. Built-In Ethernet has a self assigned IP address and may not be able to connect to the Internet.
Network (on the G3) shows
Built-In Ethernet is currently active and has the IP address 192.168.2.7. You are connected to the Internet via Built-In Ethernet.
When i try to go to a webpage on the G3 it fails stating, 'You are not connected to the Internet'.
I'm using a standard straight through ethernet cable, as I was told a while ago from apple support that it doesn't matter which u use, straight through or crossover.
Any help would be really appreciated
Macbook 2.0Ghz 2GB 80GB/Mac Mini 1.42Ghz 1GB 80GB/Imac G3 450Mhz 640MB 80GB Mac OS X (10.4.8)

OK after some playing about I can now manage to connect to the mac mini and vice versa to share files.
The iMac G3 now says it has an IP address of 192.168.2.18, and that it's connected to the internet via built-in ethernet. I've set configure IPV4 to Using DHCP.
Except it's not connected to the net.
If i select Using DHCP on the Mini it doesn't obtain an IP address, not even a self set one. So i've set a manual IP address on that, and everything shows up green. Airpot connected to the internet and Ethernet has an IP address of 192.168.2.30.
After reading some forums I set up firewall logging. The result is what happens on the Mac Mini when I use network diagnostics on the G3:
Feb 11 16:43:52 richard-xxxxx-mac-mini natd[394]: failed to write packet back (Host is down)
So I opened port 394 (not really knowing what i'm trying) but it had no effect.

Connecting to dial-up internet with imac through mac mini?

I can't quite figure out how to do this. I have a imac g3 and mac mini connected with ethernet crossover. the modem on imac is dead, dial-up connecting though mac mini. i can go through the menus for connecting through internet through ethernet but can't quite get it to connect to the internet on the imac. should I connect to internet on mac mini-then go try to connect over ethernet on imac, or am I missing somthing else in the configuration?
Thanks

Here's Apple's documentation on how to set up your Mac mini so your iMac can share the mini's modem internet connection.
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh336.html
Hope that does it.
K.M.
PowerBook G4 (15 FW800); 17 iMac G5; Mac mini 1.42 Mac OS X (10.4.8)

Please help. Can no longer connect to my Mac Mini Server

Up until two days ago, my iMacs were connecting to my Mac Mini Server normally. All of a sudden I could no longer transfer files without being prompted to type my password. Enter password and nothing happened, then got an error message stating that I don't have permission to do that. Now, a day later, no acces to my server. Has anyone ever experienced this? Can anyone please help? I've read the Mac mini booklet but doesn't have any troubleshooting info. Thanks in advance.

Hello MrHoffman,
Thank you for the advice. I went into Terminal first and typed in your command and this is what resulted:
Last login: Fri Jan 24 22:39:08 on ttys000
serverX:~ serverx$ sudo changeip -checkhostname
Password:
Sorry, try again.
Password:
Sorry, try again.
Password:
Primary address     = 192.168.1.7
Current HostName    = serverX.private
The DNS hostname is not available, please repair DNS and re-run this tool.
dirserv:success = "success"
serverX:~ serverx$
serverX:~ serverx$
I'm not very experienced with programming or coding, but this message seems to indicate that there's a problem with DNS just like you noted. I've highlighted the note in bold...What can you make of this or the logs from console below?
Below is what I found in Console:
1/24/14 8:55:08 AM          com.apple.launchd[1]          *** launchd[1] has started up. ***
1/24/14 8:55:19 AM          com.apple.launchd[1]          (com.apple.NotificationServer[73]) Suspicious setup: User "jabber" maps to user: _jabber
1/24/14 8:55:25 AM          edu.mit.Kerberos.kadmind[58]          kadmind: starting...
1/24/14 8:55:27 AM          org.jabber.jabberd[53]          ERROR: Could not create /var/run/jabberd: Permission denied
1/24/14 8:55:27 AM          com.apple.launchd[1]          (org.jabber.jabberd[53]) Exited with exit code: 1
1/24/14 8:55:27 AM          com.apple.launchd[1]          (org.jabber.jabberd) Throttling respawn: Will start in 1 seconds
1/24/14 8:55:28 AM          org.jabber.jabberd[130]          ERROR: Could not create /var/run/jabberd: Permission denied
1/24/14 8:55:28 AM          com.apple.launchd[1]          (org.jabber.jabberd[130]) Exited with exit code: 1
1/24/14 8:55:28 AM          com.apple.launchd[1]          (org.jabber.jabberd) Throttling respawn: Will start in 10 seconds
1/24/14 8:55:28 AM          com.apple.printservice_LPR_mDNS_Plotter_Epson_7600[70]          Registering Service Plotter Epson 7600._printer._tcp port 515 TXT txtvers=1 qtotal=1 rp=Plotter_Epson_7600 pdl=application/postscript ty=$null$
1/24/14 8:55:28 AM          com.apple.printservice_LPR_mDNS_Plotter_Epson_7600[70]           8:55:28.703 Got a reply for service Plotter Epson 7600._printer._tcp.local.: Name now registered and active
1/24/14 8:55:30 AM          org.jabber.proxy65[52]          /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /twisted/persisted/sob.py:12: DeprecationWarning: the md5 module is deprecated; use hashlib instead
1/24/14 8:55:30 AM          org.jabber.proxy65[52]            import os, md5, sys
1/24/14 8:55:30 AM          org.jabber.proxy65[52]          /System/Library/Frameworks/Python.framework/Versions/2.6/Extras/lib/python /twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
1/24/14 8:55:34 AM          com.apple.launchd.peruser.501[174]          (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/24/14 8:55:35 AM          ServerScanner[200]          Preference says we shouldn't scan
Thanks!

My Apple wireless keyboard won't connect to my Mac mini any more.

My Apple wireless keyboard won't connect to my Mac mini any more. Going through the Bluetooth Setup Assistant doesn't help - the computer finds the keyboard, but when I type in the pass code it fails to pair with it. The green LED on the bottom of the keyboard flashes twice at roughly two-second intervals. I've tried replacing the batteries and this has had no effect. I have all the latest software updates installed.

Welcome Cheirhandrea!
There are easily hundreds of variants of the iMac dating back to 1998. Many of the pre-2006 iMacs this forum covers cannot support an Apple wireles keyboard. Because this model has been in production for so long, it is important for you to let us know as much about your computer as possible so someone won't give you information that may not be appropriate to your iMac variant.
So we need to know:
1) Your processor type and Mac OSX version, both available by doing "About this Mac" from your Apple menu at the left end of the menu bar:
2) The make and model of the keyboard.
I asked for your Mac OS version because "iOS" as currently shown in your equipment profile cannot run on any Mac computer, only Apple's mobile devices. Once you get the OS version from "About this Mac," please change your profile to avoid further confusion and get help faster without the delay of someone having to ask for clarification before they can start helping.

Can I use my iMac with Mac mini?

Can I use my iMac (PowerPC G5 2.1 GHz, Build 9L31a, Serial # W855104UTAR, VERSION 10.5.8) as a monitor with new Mac mini.
If yes, how to do it?

Qalaska wrote:
Can I use my iMac (PowerPC G5 2.1 GHz, Build 9L31a, Serial # W855104UTAR, VERSION 10.5.8) as a monitor with new Mac mini.
If yes, how to do it?
YES!
You either must use a monitor to initially set up the Mac Mini, or use Target Mode to boot into its hard disk, and create these settings, but:
You turn on Screen Sharing in the Sharing panel in System Preferences in the Mac Mini. In my case I also give my Mac Mini a fixed IP with DHCP with Manual Address in the Network panel.
Then you boot your iMac and in the Finder in the GO menu to Connect to Server... and enter: "vnc://192.168.0.148" but replace 192.168.0.148 with your Manual Address for your Mac Mini. You log in with your name and password for the Mac Mini and your Mac Mini will now appear in its own window.
Go to Full Screen and now you can running your Mac Mini with your iMac's keyboard, mouse and monitor.
I have been using my mid-2011 Mac Mini in this fashion since I purchased it.
As a backup, I have an HDMI cable connected from my Mac Mini to my HDTV to allow for "monitor viewing" when and if needed.
I have an older Mac Mini running Snow Leopard as part of my home entertainment center, and with its own IP, I also control it in this fashion without a monitor (although I can "view" it on my HDTV through its component video input, when needed).
This is known as a "headless" mac mini.
In my case, instead of an iMac, I use my MacBook Pro.

I keep loosing blue tooth connection resulting in mac mini freezing.

I keep loosing blue tooth connection resulting in mac mini freezing. I am using an apple wireless keyboard and mouse. This did not happen until i upgraded to mountain lion. your thoughts
I leave the system on with Itunes loaded so I can use it for my media center with my Apple TV's
I use Super Duper every night at 2am for back as well as time machine.
I have the newest mac mini
2.3 Ghz Intel i5
8 gb of ram
i have 3 WD 2TB Hard drive connected (2) USB (1) Firewire
Also a Plextor blueray drive
Hooked to a Apple HD Monitor
Please Help.
I have been in tech support many times. I also brought it into my local Apple store.
Frustrated .
I spent a lot of $$ to make this set up happen
Please help.
Scott Southard
[email protected]

Did you ever find a resolutution to your issue? I have a similar issue after installing Mavericks where the Arris modem goes to sleep when my iMac does, even though other devices on the network are actively requesting data. For the time being, as long as the iMac doesn't sleep the network is fine.

HT4907 I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air

I am able to connect to my Mac Mini on Back to My Mac through iCloud but the keyboard/trackpad on the MBAir or MBP with which I access does not register on the Mini. So I can see the screen but cannot interact with it. Mini works accessing MBP/Air and I can use Mini to input data or interact with screens of those computers.

Regarding your first question about bookmarks, I think you discovered the answer in when you pressed the address bar. The second tab there has your bookmarks.
As for the keyboard, I'm not sure why your Firefox is reacting so slowly; mine seems to show keyboards even when I don't want them. If you have accumulated a lot of history, perhaps that's an issue?
Did you use any third party software to move your Firefox data from internal memory to the storage card?

Can airport extreme connect using a mac mini. the base station is not recognized so i cannot configure it manually

can airport extreme connect using a mac mini. this airport extreme wont connect to internet via my cable modem. I cant set it to bridge mode because it doesnt appear as a base station in airport utitlity...help

First, is your AirPort Extreme Base Station (AEBS) a 802.11n, 802.11g, or 802.11b model? Second, what is your primary goal for using this base station? Finally, is the AEBS the only router in your current network configuration?

How do i connect my new mac mini to the thunderbolt display

how do i connect my new mac mini to the thunderbolt displa, It arrives tomorrow?

It has a built-in Thunderbolt cable, see here: http://www.apple.com/displays/specs.html
So assuming your mini has a thunderbolt port (you said it's new so I assume it does), you'd just plug the display's thunderbolt cable into the mini's Thunderbolt port.

How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

How can I connect my 2009 Mac Mini to a TV that only has the Component inputs available? My Mac Mini has a Mini DisplayPort and Mini-DVI port. Thanks.

Composite is analogue with one connector. That is why it is called composite
Component is analogue with three connections. I think one for each color
Here is the one for component. I misread composite for component
http://www.amazon.com/DVI-I-Component-DisplayPort-Female-Adapter/dp/B003OBOJC2

How can I share external devices connected to my Mac mini via USB on a wired network.

Own a Mac mini with Mountain Lion. Purchased the server app. The Mac mini is connected to a wired network with Mac’s and Windows machines. I have an external hard drive and 2 printers connected to the MAC mini via USB. I would like to share these devices with other computers on the wired network. Although I have attached similar devices with an airport extreme in the past, I am unable to use a wireless router in this case. Any suggestions on making this work with my current setup?

You don't really even need server app to do this. Simply go to System Preferences | Sharing and turn on both File & Printer sharing. Then, for example, the printer (not relevant what connection it has but obviously USB is fine) will be available to everyone on the wired network.
That's all there is to it - unless I missed/misunderstood something re: your setup which seems very straightforward.

How do I combine my content from 3 external hd's and my 1 Mac Mini to my new Time Capsule (which is connected to my Mac Mini) and not have to use my external hd's again? My Mac Mini wont hold all the content on the external hd's.

My 3 external hd's are 500GB (total 1.5TB) and my Mac Mini is 500GB (Time Capsule is connected to this). I want to be able to have all the content from all these sources stored on my Time Capsule as if I only had 1 external drive. Is this possible? It is my understanding that when Time Machine backs up my Mac Mini I have to have my external drives connected since my Mac Mini does not have enough space on it to hold all the content on the exgternal hd's. I can only connect 1 external hard drive at a time and I want to get rid of them and consolidate.
And having to go back in time to search for files on 1 external hard drive and then back in time for the other external hard drive is not the most efficient thing to do. I would like it all in one place.
Thank you for your help!!

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I converted from a PC to a Mac Mini. I have my PC documents backed up on a DVD disk. I have an external DVD drive connected to the Mac Mini. I want to open them up and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

I converted from a PC to a Mac Mini. I have my PC documents backed up on a DVD disk. I have an external DVD drive connected to the Mac Mini. I want to open these documents up from the DVD storage and save them to the Mac, BUT....when I put the DVD disk in the Mac is NOT reading it!

Hi Joe,
Thanks for your quick response. I should add....it worked before. When I previously inserted the two DVDs into this remote drive, and I went into finder, I could click on the "remote device" line and see all my saved documents (excel, word, etc) on the DVD and open them on the Mac. Now I cannot see them, when I try to open them on the Mac, nothing happens, nothing is displayed. I just re-tested the remote DVD drive with a CD and, no problem, it opened up the CD via iTunes and I cold play the CD. SO......I know the remote DVD drive (it's an LG by the way) is fine, it's something to do with some settings on my mini mac,especially where I could open it previously. I do not remember changing any settings since then.
When I go into system preferences and click on CD/DVD it gives me options of how to open up a music CD (default is iTunes), a DVD (default is iMovie), etc. The problem is my DVD is all miscellaneious files/documents. I just want to be able to see them in the finder. I also tried to open them via microsoft word, from the remote disk and again, it could not open the drive, even though some of the documents were microsoft word documents. Again, I was able to open them previously and the DVD is not corrupted in any way.
Any additional advice?
Thank you!

Connecting iMac to mac mini

Similar Messages

Maybe you are looking for