Connecting iMac to Windows network with domain

i tried to connect my new iMac to the windows network at the office. it would not find the server. any suggestions

johnthompson1993 wrote:
Hi,
To connect, I need to 'configure encryption as AES', which I'm not sure how to do on OS X. Furthermore, after signing in with my college ID I am required to 'Use the domain name [domain name]' and 'configure your browser to use the college proxy servers [example.example.net] on port [123]
The encryption should be configured automatically. To use the proxy:
1. Open System Preferences
2. Click on Network
3. Select Airport from the list on the left
4. Click on Advanced, near the bottom right
5. One of the tabs will be called Proxy. Configure your settings there.

Similar Messages

Connecting to a Windows Network with Cisco AnyConnect

Okay so I am beyond stumped here and hope you can help. So I am able to connect to my companies VPN using Cisco AnyConnect with no problem. The network admin can see me in, and I can even access Web based resources. My problem comes when I am trying to ping the domain controller and our DNS server and cannot. In addition when I go to use RDC to connect to our Terminal Server no love.
No for the very weird part. When I do a traceroute to the TS server by name I am getting DNS resolution. So it appears that I am able to hit the DNS server, but not able to ping it for some reason. I have tried everything I can think of short of binding my computer to the network. Any ideas are very welcomed!!!!
Thank you all in advance,
Mike

I am assuming that the windows and Mac appear on the same subnet of your local LAN?
If the PC's are having difficulty finding the Mac and the Mac has a static IP, I would add that listing to your local "hosts" file, the entry would go below your local IP found in that file such as:
127.0.0.1
192.168.1.5 maciscool (where maciscool=NETBIOS name you entered in the Advanced section of Network under WINS), and/or under "Sharing" at the top box entitled "Computer Name:", if it doesn't work with maciscool.local, try removing the ".local" from the computer name. Older versions of whenders had difficulty with upper/lower case machine names, if it is currently lower case, make it UPPERcase.
The local hosts file used to be found under c:\window\system32\drivers\etc, have no ideal where they hid it under Vista but probably the same place.
Windows should search local "hosts" file before going to WINS, before going to DNS, since you most likely don't have a Windows domain with a WINS server it won't look there and of course it won't find computers on your local LAN via DNS, so by adding those to your local hosts it acts as a mini DNS server to resolve machine names and addresses.

Connecting to my Windows Network

Hello everyone. I recently purchased a new 24" iMac, and I'm having trouble connecting to my windows network, and my printer. My Windows Vista Home Premium is connected directly to a router, and my printer (HP Officejet J5780) is connected directly to the computer, so I route through the computer to print from the rest of my house. However, on my iMac, the network itself never pops up. I set the workgroup on the iMac to be exactly the same as the Windows, but I still can't see the network. Does anyone know how to fix this? Thanks!

Hello!
I've just bought an iMac....
If it's a brand new machine, you should be in this forum area:
http://discussions.apple.com/category.jspa?categoryID=189
as you've found the forums for much older iMAcs with G4 processors
or you can also ask in the Leopard OS Networking sub-forum here:
http://discussions.apple.com/forum.jspa?forumID=1222
If your iMac is an older model, then post the model details and we can go from there.
A

I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

I can't connect to ad-hoc networks with my iPod touch 4g AND IT ****** ME OFF!! (running firmware 6.1.2) Please fix this extremely annoying issue ASAP!!

Try:
- Powering off and then back on your router.
- Anything else here
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- Try on another computer/network
- Wait if it is an Apple problem

FAX through HP laser jet 3050 which is connected on a Windows Network. I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

HOW can i sent FAX through HP laser jet 3050 which is connected on a Windows Network.
I m also connected to this Network and i print through HP LJ 3050. How can i sent fax through HP LJ 3050?

Welcome to Apple Support Communities.
Apparently there is no HP software support for the HP 3050 fax or scan functions with OS X 'Lion' 10.7:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02950970 #A1
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c0292511 4
Alternatives?
1) Run a Windows client on the Mac using Boot Camp or one of the available virtualization programs like Parallels, VMware Fusion, and others so you can run the latest Windows print/fax/scan driver.
2) If your Mac hardware supports an older OS X version, downgrade to one (Snow Leopard?) that still had support for print, fax and scan.
3) Buy a newer printer. A 2007 model is 5+ years old, and should now be fully depreciated in a business.

Settings to connect to office windows network using wifi

Hi there,
I'm trying to connect my MacBook to the office network using Wifi - it's a full windows network with the usual active directory, fileservers and exchange. I can connect using LAN and can get to the network folders and exchanges etc, But I can't work out what settings need to be changed on the Wifi adapter to go wireless. Had a try searching for the answer but no luck.
I've tried setting up a new user on the Mac with the same name as my network login. Attempted to change the DNS settings to be the network IP and changed the workgroup name under the WINS tab (although that seems to always change back to WORKGROUP automatically). And of course use my network password when asked for a WEP password when trying to connect. It doesn't ask for a username when connecting to the network wifi - just a WEP password.
Can anyone explain what settings I need to change on the Macs Wifi adapter?
And what details will need from my PC to get it going e.g. IP address, workgroup etc.
Not much of a clue with networking. So please speak slowly!
Thanks for the help,
Mike

All you should need is to verify that the correct IP ports - 3283 and 5900, primarily - are open on any applicable routers, and if necessary forwarded to the internal IP address of the Mac mini. Then just set up the Remote Management settings (Sharing system preference) on the Mini and add the mini to the Computers list in ARD.
Regards.

Can't connect to a wifi network with a wep keyid 2

Hi,
how do you connect to a wifi network with wep but the keyid is 2, i can't find an option.
i put the password, in asci and in hexa, and the answer "can't connect to the network" a xp near got connected after changing the key id in configs :((
did i miss something?
thanks for help

I am relatively new to Mac's, as at 40 having had IBM/Windows compatibles since I was 14 (8086 woot!), I am still learning.
However, I believe the answer is that you must use Key 1. I don't believe OSX offers the chance to use any others. However, in case I am wrong, try putting a $ before the WEP passphrase, but again, I think it only uses Key 1.
Hope that helps,
Jesrael
Macbook 1.8 Core 2 Duo Mac OS X (10.4.9) 2GB Ram

X220: Connected to a 4G network with 21Mbit/sec - A pleasant surprise!

Yesterday i was at a meeting, where i normally is connected to 3G WAN with 7.2Mbit/sec. - i started the connection as i normally do, but discovered that i connected to a 4G network with 21Mbit/sec. I didn't even know that the WAN card in my X220 was able to do that. So i tested the connection immediately and i could download with 1.5Mbyte/sec. effectively.
It was a pleasant surprise!
Moderator Note: Edited subject to match content.
/Henrik - Denmark
X220 - i7-2620, 8GB, 128GB Samsung 830 SSD (I just LOVE my X220!)
Solved!
Go to Solution.

It seems your modem works at full speed for the 3G networks - HSDPA mode, 14.4 Mbps (Cat 10) downlink speed. Try upload and measure the speed. May be you'll get in the HSUPA mode up to 5.76 Mbps (Cat 6) uplink speed.
At the same time you see 21 Mbit/sec in the connection status window... Very interesting.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

I can not connect the wi-fi network with my iPad Air

I can not connect the wi-fi network with my iPad Air

Hi there maurobats,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W.

Browse windows networks with Thunar

Hi,
I am running xfce on arch linux, everything up to date I believe. I would like to be able to browse windows networks with the file manager (Thunar). I do not need to share files or even access password protected content. I am simply looking to be able to browse public folders. (Without having to mount anything manually)
I found some instructions for installing samba and fusesmb, but then found a note saying fusesmb doesn't work anymore. A search on that showed that most people seem to be using gigolo now, but there is no wiki page for it, and being a noob I am hesitant to try to mess with it on my own.
If someone could give me very precise instructions on how to do this (samba/gigolo or otherwise, I don't care about the method as long as it's not terribly difficult) I would be very grateful. Thanks!

Ok, I installed samba and smbnetfs and everything looks good, the workgroup shows up in the file manager now. However...
None of the windows computers show up.
I installed exactly as the wiki said, using gamin and smbnetfs but not SWAT. I changed the workgroup to the correct name. Some other setting I might have missed that it needs?

Connecting to Wireless Network with domain name and proxy servers?

Hi,
I'm trying to connect to the wireless network at my college, however it's not as straight forward as usual... The network is hidden, although I know to 'Join other network' and type in the SSID of the network and then set the authentication method to WPA-Enterprise. However, this is where I run into a problem..
To connect, I need to 'configure encryption as AES', which I'm not sure how to do on OS X. Furthermore, after signing in with my college ID I am required to 'Use the domain name [domain name]' and 'configure your browser to use the college proxy servers [example.example.net] on port [123]
Any help on this would be greatly appreciated as it's important that I log on to the network for work etc.
Thanks very much for your time.

johnthompson1993 wrote:
Hi,
To connect, I need to 'configure encryption as AES', which I'm not sure how to do on OS X. Furthermore, after signing in with my college ID I am required to 'Use the domain name [domain name]' and 'configure your browser to use the college proxy servers [example.example.net] on port [123]
The encryption should be configured automatically. To use the proxy:
1. Open System Preferences
2. Click on Network
3. Select Airport from the list on the left
4. Click on Advanced, near the bottom right
5. One of the tabs will be called Proxy. Configure your settings there.

Unable to connect to home wireless network with my iPod touch

I've had my iTouch for several months now and I'm still not able to connect to my wireless network at home. I've tried the resets and other suggestions I've found in the discussion groups but nothing has worked.
I have an older Netgear Router MR814v2 and it is unsecured. It is attached to my old desktop, HP Pavilion running Windows ME, which is not able to run the itunes software. My HP laptop is where my iTouch and iTunes software is installed.
The iTouch displays my network with good signal strength, but when I try to connect I get the "unable to join the network "NETGEAR".
Going to my router, it does not recognize my iTouch as an attached device. Why is that and what am I missing?
Thank you for all suggestions and your help.

I tried powering down the router. When it's off the iTouch does not recognize the network and then when it's powered on again, the iTouch recognizes the network. Unlike the public wi-fi spots that my iTouch responds to, where all the info like IP Address, Subnet Mask, Router, DNS etc are populated in the settings...my iTouch does not populate these fields at home even though it recognizes the network. I still get the unable to connect to network error. Could it be that my router is antiquated and can not support the iTouch? Like I said earlier, my Router does not recognize the iTouch as being attached to it.

10.6 breaks resourceforks when used in a (Windows) network with 10.5.8 (?!)

Does this only happen to me ?
a file: filename.txt, which has a resource-fork when copied to a remote windows share (using ntfs filesystem) will not produce a "._filename.txt". However, the resource fork is preserved.
But, when you access this file using a 10.5.x or earlier client, it does not see the resource fork.
The other way around, the same problem appears.
To check this:
try this using a terminal on 10.6:
Create the file:
echo "1234567890" >test.txt
echo "theresourcefork" >test.txt/rsrc
check if the resource fork is ok:
cat test.txt/rsrc
result: theresourcefork
copy the file to the remote share ( in my case: windows 2k3 server) using smb protocol
rename the file to "test1.txt"
copy back to your Mac on 10.6
again check if the resource fork is there:
cat test1.txt/rsrc
result: theresourcefork
Now, go to your 10.5.x Machine
copy test1.txt from the network share to your computer.
check if the resource fork is there:
cat test1.txt/rsrc
result: (empty)
while it is nice, that 10.6 probably uses ntfs streams to preserve the resource fork ( a much smarter behaviour as before with the "._xyz" files), It completely breaks your data if some of it relies on resource forks and you use 10.6 together with older MacOS versions.
The best case is that you cannot open your documents any more on 10.5 or 10.6. All other cases are worse.
Apple should have built in a fallback compatibility or, should have printed a sticker on the CD.
WARNING: Do not use together with earlier versions of the OS in a Windows network !
I have this rather strange behaviour on 2 Machines, but have not checked if other installations have the same problem. But, I did not find anyhting here when I search for "resource AND fork".
Can anyone else try this out if the behaviour is really that destructive ?

Followup:
indeed, 10.6 uses ntfs streams when availible to store metadata.
for a workaround:
http://developer.apple.com/mac/library/documentation/Darwin/Reference/ManPages/m an5/nsmb.conf.5.html
create
/etc/nsmb.conf
contents:
\[default\]
streams=no
close all server connections, reconnect.
Message was edited by: nobody loopback

Connecting to a windows network

I am an MBA and Lion OS newbie of one day. The basic interface is straight forward but I have a problem getting my new laptop to work with my existing Windows 7 network. Specifically I have a file server (Lacie EDMINI NAS) and I can see it (sometimes) and it lists the directories but when I try to open a directory it tells me that the device is not avilable/present. After I click the device in the finder sidebar it seems to disappear.

I have the same problem at my work. We have a full Windows 2003 server and I can't connect to it. I can print through the server and connect to the internet, but can't connect to the server to see the files, although the server thinks that I logged in (the log file shows that it let me in), but for some reason apple doesn't see that.
The only solution so far was that I've made an ftp access to the windows server, this way I can connect and see the files on windows 2003. matter fact I use sftp to do that to make it secure. that means your server admin has to create and sftp option to connect to the server. the good side of that is that you can have access to your files on the windows server from everywhere.
but if anyone has any idea how to connect to a windows 2003 server, please let me know, because so far I know at least 4 or 5 businesses who has the same problem. that needs to be solved by apple.
one more option is to run parallels on your machine and through that you can access and share files with windows servers, that is what I am also doing and it works fine, just a bit slow.
MacBook Mac OS X (10.4.7)

Can't connect Mac to Windows network drive

I am the only Mac in a PC college. I frequently have to connect to shared folders on the PC network. For six months I could "connect to server... cifs://name" with no problems. Last month, this suddenly stopped working (error = server may not exist). My office IT people told me to switch to smb://name and it worked again for at least a day. Now I can't get it to connect at all. The finder can see the PC server in the shared pane, but it won't connect to it. "Connect to server" won't connect either, no matter how I try. I get the "server may not exist" error, the "volume won't mount" error, or the "not all data is readable" error. The local IT people say they haven't changed anything and all the Windows people are fine. As the lone Mac user, I don't think much help is forthcoming from IT here. I don't know much about this sort of thing, so any suggestions would be most appreciated.
I do not know if the problem coincides with the update to 10.5.6 or not.

Karen –
Unfortunately I think that 10.5.6 broke several aspects of MS Windows support. If you were to GOOGLE ‘can’t connect to windows shares with os x 10.5.6’ you will find plenty. I personally have not upgraded to 10.5.6 because of it. Though not the best method you may want to consider using the IP address of the system you are connecting to.
smb://xxx.xxx.xxx.xxx/<share name>
Obviously I know that this is easier than said especially if you are the only Mac on the network, I am sure the College IT group is just going to fall on their swords to help you with this or even providing you this information. With that said you may be able to get the IP by trying to ‘PING’ the server’s name. To do this open a Terminal session on your Mac and type the following at the prompt:
ping <server name>
You should get a something like this:
PING <server name> (xxx.xxx.xxx.xxx.xxx): 56 data bytes
Now let me caution you, I am sure that the college has turned of PING reply on their network you will most likely get the line above and that is it. Also depending how aggressively they monitor their network for such activities you may show up on some report. Given that I would suggest that if possible you find someone in the IT group that is somewhat sympathetic to your problem and let them know what you are attempting to do.
Not the best answer but I know that using the IP instead of the server name seems to work.
Best of luck.
BH

Connecting iMac to Windows network with domain

Similar Messages

Maybe you are looking for