CONNECTING IPAD TO DENON VIA HDMI

Can I use my ipad to connect to denon HDMI port so that I can use it as a display device to view the onscreen menu of the denon.
As you know onscreen menu or GUI of denon is displayed only via HDMI port, so I want to connect my ipad to this HDMI out port of denon so that I can use it as a display...is that possible?
THank you so much

Not that I am aware of.

Similar Messages

  • How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system prefer

    how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system preferences.  what else do I need to do?

    First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
    I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
    Matt

  • My Macbook Pro will no longer connect to my tv via HDMI

    Well basically it is in the title, my Macbook Pro will no longer connect to my tv via HDMI.
    I have been using this cable for a long time and works perfectly.
    earlier today i used it to connect my mac up to my parents 4k tv, it worked fine, did what i wanted to do.
    but now when I've come to connect it up to my tv it recognises there is something connected but it won't display anything
    it just says no signal on my tv
    im not sure whether my mac has changed some settings on its own to run on 4k but now to high to run on my 1080p tv
    pretty annoying so any ideas id be very grateful.
    I've already tried
    restarting my mac
    turning tv on and off
    different hdmi ports
    thank you

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try another cable

  • What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    What's wrong with my macbook pro (15" early 2011) when i connect it with TV via hdmi

    Hello Alex,
    It sounds like you are getting excessive CPU usage when connecting an external display via HDMI to your computer. I would try the troubleshooting steps outlined in the article named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    When using an external display be sure to check the following:
    If you're using an Apple notebook, confirm the AC power cable or adapter is securely connected to the computer and the cable providing power to the display is also secure. It is always good to have your notebook connected to AC power when an external display is in use.
    Confirm display adapters are fully seated in their respective connections and that they are supported models and for the computer and display. Refer to these articles to assist you with adapter compatibility and further configuration information:
    Monitor and Display Adapter Table
    About Mini DisplayPort to HDMI adapters
    Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
    Thunderbolt ports and displays: Frequently asked questions (FAQ)
    Remove all display cable extenders, KVM switches, or other like devices and retest to determine if the issue is resolved.
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the systemYou can reset the Mac's parameter RAM and SMC.Reset the resolutionStart by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • SAMSUNG LE32R87BD connect to Mini Mac via HDMI - HELP!

    Can anyone confirm that the Mini Mac can connect to the LE32R via HDMI?
    IF so - can anyone give me some instructions - I cant get it to work.
    When I boot up the black and white DOS like commands come up, but then it goes blank and says "no signal"
    Its a 2GHz intel core 2 duo.

    Can you please tell us more about the ports, adapters and the cables that you are using?
    Dah•veed

  • Is there anyway to connect IPad to IPod via cable?

    Is there anyway to connect IPad to IPod via cable?

    Many programs will allow you to get your music off your ipod/ipad and onto a computer so it can be resynced. Phoneview (Mac) and transpod (PC) are two examples.
    This program
    http://www.theboysdownunder.com/ipod2ipod/
    claims to be able to do what you want on the PC.

  • Sound won't work when my MacBook is connected to my TV via HDMI

    I have my MacBook connected to my HDTV via mini DVI to HDMI and the picture is perfect, but I cannot make the sound work. I've tried going to sound under system preferences but my tv is not listed as a device. Do you know how I can make the sound work?

    You need an audio cable to connect your Mac's audio out port to your TV's audio in port. The minidisplayport does not send sound.

  • Cant sync my ipad to tv via hdmi

    I hook up my ipad to my tv to watch netflix or history channel via hdmi. A popup window appears and says the monitor I use is not capable. Or when I do get a picture I dont get sound

    william Stofko wrote:
    I hook up my ipad to my tv to watch netflix or history channel via hdmi. A popup window appears and says the monitor I use is not capable. Or when I do get a picture I dont get sound

  • Very hard to use LR5 when connected to External TV via HDMI

    Hi
    I was teaching some post processing today using LR5 connected to a 50" Sony TV via HDMI cable and could barely use LR. It took a few attempts to use the brush or gradient tools.
    Did anyone experience this?
    Thanks
    Micha

    After all those iOS 8 updates, Apple proved Apple do not care~ sold the product then don't care~

  • Sony HT-CT100 cant connect to hd tv via hdmi?????

    hi i just purchased  a sony  HTCT100  sound bar system.and i have a sony 32 inch tv.i tried to connect the sonund bar to my tv via hdmi.it didnt work.system works optical cable.but i wanna use the hdmi cable.do you think something wrong with the tv out on the sound bar???

    Have you already setup the HDMI input at the TV in the HDTV  menu?
    It isn't a matter of using a proper channel.
    You don't hold the P key.
    Hold the Windows key down and tap the P key to see the available projection options.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Yoga2 Pro - how to use tablet as a projector connected with TV decoder via hdmi cable?

    Hi, My TV is broken and I would like to use my tablet as projector connected via HDMI cable from TV decoder to my tablet. What should I do? How to configure and which apllication I should use?

    You will need to choose the correct (Input) on the TV for the MacBook.....say your cable box is set to HDMI !.....and your MacBook is on HDMI 2.....you will need to select HDMI 2 from the TV's menu for the signal from the MacBook to show on the TV screen.......the selection choices are examples as I do not know exactly how you have things connected......

  • Do I need a support app to show videos from iPad to HDTV via hdmi cable?

    Do need a support app to play videos from my iPad to a HDTV via hdmi cable?

    No.  The Videos app should work fine.

  • Connecting ps3 to U350 via hdmi

    I've had my laptop for a good 6 months and still haven't removed any of the stickers it came with. One of the stickers reads: HDMI Supports High Definition video and audio output and input. I've had no problems with the output to my hdtv using hdmi, but I was wondering if it would be possible to connect my ps3 to the hdmi port? I'm going on a trip and it would be a lot more convienent to use my laptop than trying to pry the cable cords off the hotel tvs, on top of buying the adapter as well. If anyone has any idea's on how to make this work it would be greatly appreciated.=D

    that helps

  • Connecting iPad to LED TV HDMI Slot

    I have an iPad with Retina Display and would like to connect it to my Samsung LED TV via the HDMI slot so I can watch Sky Go from my iPad on my TV. Which cable do I need please? Help much appreciated.

    I use the Apple TV Adaptor. You connect IT to your TV, which means no Cable restrictions on your i Pad. The Adaptor is under my TV allowing the i Pad to be anywhere close by.

  • "Mode not supported" Mac mini connected to LCD TV via HDMI

    Hello, new mac min owner here (2.5) (September 2011).  I followed the instructions in the "hello" booklet, including attaching peripherals, such as mouse and keyboard. I also connected a Samsung LCD TV via HMDI cable - as I propose to use this as my monitor. I then switchedn on the macmini, as directed in pages 11-16 of the macmini 'hello' handbook. Unfortunately I cannot even progress to the setup assistant as my TV just tells me that the "mode is not supported" through the HDMI cable. I assume that some output settings need to be changed in the macmini to accommodate the LCD TV output range.
    My question is, how do I change these settings if the only screen I have is the screen that the macmini will not output to? Isn't this a massive oversight by Apple, given that a major selling point is the macmini's versatility?

    What you are seeing, where you can't see the edges of the image, is known as "overscan".
    This is something TVs have done forever to avoid seeing weird stuff at the edges of the transmitted frames.
    The display control in System Preferences lets you turn overscan on or off (it is a checkable item in the "Options" panel). You might need to have this checked to display video, but you sure don't want it checked to use the TV as a computer display.
    Although I have overscan OFF on my older Mac Mini, I've had the problem where sometimes after a restart the display is in overscan mode. To fix this, I can "guess" where the apple menu is off the top left of the screen, get to system preferences, check overscan to be on and then uncheck it to turn it back off. If you can't guess where the apple menu is successfully, you might try accessing the Mini from another Mac by using screen sharing. The shared screen looks correct even if overscan is on.

Maybe you are looking for

  • Need to change the Idoc Status based on the Text in the Idoc

    Hi All, I have developed Idoc--SOAP Sync Process Scenario Using BPM and Works Perfectly. I have used STATUS.SYSTAT01 Idoc to capture the Response that is comming from the Webservice. I have mapped the response Text( Success or Fail) to one of the fie

  • 6750 How can I get a ''Low Battery Alert'' from my...

    I have recently bought  a 6750. At one point I realized that my phone died without any warning. Went through the User Guide, nothing. Went through the phone and only found one thing under: >Settings > Tones > Other Tones, ON or OFF. I set it to ON. I

  • Why cant DW CS5.5 show html5's new elements in the wysiwyg design view?

    Why cant DW CS5.5 show html5's new elements in the wysiwyg design view? I created a <section> and an <aside> in code view, and styled those elements in my CSS, but it doesnt show anything in design view! why not? Its annoying. CS5.5 is Adobe's spring

  • Forms 6i event when change canvas tab

    dear sirs, i have form consists of 2 canvas one of them tab convas 'cansvas1', (tab1 and tab2), and another is content canvas 'canvas2' i would like to do when i click on tab2 which are tab canvas from canvas1, i want to make canvas2 hidden that is a

  • Why are there lines on my copies

    When I make copies of clean originals, why am I getting double lines across my copies